Mac os test microphone

Mic Test

Testing Area

• Detecting your media devices. Please wait.
• Waiting for your permission.
• Starting your microphone. Please wait.
• For more information, [[click here]].
• Changing the microphone will reset the current process. Do you want to continue?
• An unexpected error occurred. Reload the page and try again.
• Could not find any media devices. It is very likely that your browser does not allow access to these devices. Try to reload this page or open it using another browser. Just remember that in order to start your microphone you need to allow our website to use it.
• Could not find a microphone, however there are other media devices (like speakers or webcams). Most likely, this means that your microphone is not working properly or your browser cannot access it.
• Your browser does not support features for accessing media devices. Please upgrade your browser or install another one.
• It looks like your browser is blocking access to microphone identifiers. Because of this, it’s impossible to detect and manage all available microphones.
• You did not allow the browser to use the microphone. Reload the page and try again.
• Apparently, your microphone is being used or blocked by another application. To start your microphone, you must temporarily close that application.
• Waiting time for your permission has expired. Reload the page and try again.
• Cannot stream audio. The cause may be a defective/disabled microphone or that it is currently being used by another application.
• The audio track is paused.
• Cannot detect any active stream of media content.
• Your microphone does not output any audio tracks.
• Your browser does not support features for accessing audio tracks.
• Audio track not available due to technical issue.
• Your microphone suddenly stopped transmitting audio track.
• For unknown reasons, the audio track is disabled.
• Click here to allow access to microphone identifiers
• Click here to try forcibly start the microphone
• Testing your microphone and recording your voice.
• Please say “Hello” or make some noise. The tester records the sound captured by your mic and you will be able to playback it after testing is complete.
• A microphone was detected. Press “Test my mic” to check the functionality and supported properties of your microphone.
• Several microphones were detected. To check the functionality and supported properties of your microphone, select it from the list below and press “Test my mic”. Please note that in order to obtain more accurate results it is recommended to keep enabled only one microphone.
• Testing was completed successfully and it seems your microphone works properly. All details about your mic are displayed in the “Microphone Information” table. Please do not forget to leave a review about your microphone.
• Testing failed because your microphone could not capture any sounds. Please make sure your microphone is not muted and try again.
• Testing failed because your microphone captured only a single tone. Please make sure your microphone is not muted and try again.
• During testing, there were errors due to which it is impossible to determine some parameters of your microphone. Reload the page and try again.

Microphone Information

Quality Rating:	—
Microphone Name:	Not selected
Automatic Gain Control:	—
Number of Audio Channels:	—
Echo Cancellation:	—
Estimated Latency:	—
Noise Suppression:	—
Sample Rate:	—
Sample Size:	—
Volume:	—

Rate your microphone

Check out how good your microphone is!
Leave a review about your microphone and find out the place in the rating of the best microphones.

Latest Testimonials

nice web to test and see chart go up and down — Spore

About MicTests.com

This website provides a simple online mic test that allows you to check if microphone is working properly. Since it’s a browser microphone test, you don’t have to download or install any third-party software. Moreover, even if it may seem too simple, MicTests.Com will test your microphone regardless of its type or the device and operating system you are using. And to surprise you even more, this mic test will display a lot of useful information about your microphone (for example, its name, number of audio channels, latency, sample size and sample rate, as well as if it supports echo cancellation or noise suppression). In addition, if the tester will detect any problems with your microphone, you will receive tips on how to fix them.

Why do you need a mic test?

There are many reasons why people want to test their microphone. Here are just a few of them:

• Have purchased or connected a new microphone and want to check if it works properly.
• Want to check if headset microphone is enabled.
• Verify if computer microphone doesn’t distort their voice.
• Find if webcam has a built-in microphone.
• Make sure that other applications can detect their microphones.
• Want to admire the microphone visualizer.
• Just out of curiosity.

How to test your mic?

Testing your microphone with our online tool is pretty simple: just wait until all your multimedia devices are detected and then click the “Test my mic” button. If this button doesn’t appear and you haven’t received any notifications, it’s likely that there’s been an error with your browser. To help you, please contact us at info@mictests.com

How is the microphone being tested?

1. First of all, it is determined if the browser supports functions for accessing multimedia devices. If so, a list of detected microphones and necessary controls are displayed.
2. When you click the “Test my mic” button, your browser will ask permission to start the microphone on this site.
3. Once access is granted, the microphone will start up and you will see the visualizer of sounds captured by your mic.
4. The tester starts to record your voice and any noise captured by your mic.
5. Now it’s time to determine supported features and make some some measurements.
6. Finally are displayed the testing results, hints and additional controls (including the playback).

Why do you have to leave a review?

Once the mic test is complete, you can leave a review about your microphone. This is not necessary, but we recommend that you do this to help others buy a good microphone and bypass the bad ones. Also, after your review is published, you will see how good your microphone is (i.e., you will find out how good it is in the best microphone rating).

System Requirements

To test the microphone, you only need a modern browser (unfortunately, Internet Explorer is not a such browser) that supports functions for accessing multimedia devices. As you have noticed, our microphone test tool does not require any additional software such as Adobe Flash, Microsoft Silverlight or browser plug-ins. There are no restrictions on the type of device, so your microphone can be integrated (into headphones, mobile device, laptop), wireless (WiFi, bluetooth) or connected via cord (USB, TRL, XLR).

Below are listed the operating systems and the minimum versions of supported browsers:

If your operating system or browser is not listed here, this does not mean that it is not supported. It just has not been tested yet. Therefore, feel free to check yourself.

Privacy

1. All operations required for testing are performed by the browser and all data is stored in the user’s device memory.
2. We do not store technical information until the user publishes a feedback about his microphone.
3. If the user does not publish a review, all data from the device memory is deleted when the page is closed.
4. Reviews are publicly available and contain only technical information about the microphones tested.
5. We never store audio recordings made with your microphone.

Источник

Как проверить микрофон на Mac

Как проверить микрофон на Mac

Mac поставляются со встроенным микрофоном, и вы можете подключить внешний микрофон ко всем моделям Mac . Как и в случае с большинством аудиоустройств, микрофон будет работать по принципу Plug Play.

Фактически, будет проще настроить внешний микрофон на Mac, чем в системе Windows 10, где, возможно, потребуется установить правильный аудиодрайвер.

Хотя установить / настроить микрофон на Mac несложно, проверить, работает ли он, не так просто. Вот как вы можете проверить микрофон на Mac.

Проверить микрофон на Mac

В общем, есть два способа проверить, получает ли подключенный микрофон какой-либо вход, собственные настройки громкости микрофона системы и сторонние приложения / службы.

1. Системные настройки для микрофона

Если вы хотите протестировать внешний микрофон, сначала подключите его к Mac.

1. Откройте приложение Системные настройки.
2. Перейдите к настройкам звука
3. В настройках звука перейдите на вкладку ‘Ввод’
4. Выберите устройство ввода, т. е. микрофон, который вы хотите протестировать.
5. Отрегулируйте громкость , чтобы он мог улавливать звук вы хотите, чтобы микрофон улавливал и говорил в него.
6. полосы загораются, указывая на обнаруженный ввод. Если они не загораются, ваш микрофон не обнаруживает никакого входа.

2. Обзор и веб-сервис

Микрофон — это устройство ввода, поэтому доступ к нему предоставляется по усмотрению пользователя.

Если ваш Mac может обнаруживать микрофонный вход из приложения «Системные настройки», но приложение не может его уловить, это может быть проблема с разрешениями или с приложением.

Чтобы узнать, что не так, запустите тест микрофона в своем веб-браузере.

1. Откройте свой веб-браузер и посетите этот Приложение для тестирования микрофона.
2. Нажмите кнопку воспроизведения, указанную справа.
3. Ваш браузер запросит разрешение на доступ к микрофон. Разрешите браузеру доступ к микрофону.
4. Как только браузер получит доступ к микрофону, говорите в него.
5. Маленькое окошко под тестовой областью будет указывать на ввод звука, линия изменится, отражая громкость звука.

Заключение

Приложения для тестирования микрофона на macOS не распространены.

Вы найдете несколько бесплатных приложений, которые позволят вам управлять состоянием включения и выключения микрофона, а в некоторых случаях вы сможете изменять громкость, включать ивыключать микрофон с помощью сочетания клавиш.

Встроенный индикатор громкости микрофона выполнит свою работу, но если вы не удовлетворены, загрузите бесплатный инструмент записи, такой как Audacity, и позвольте ему контролировать микрофон вживую.

Источник

Как проверить работу микрофона на Mac

Следует отметить, что на Mac достаточно легко установить внешний микрофон, в сравнении с Windows 10, где потребуется подобрать правильный аудиодрайвер. Но вот проверить его работу не настолько просто.

Способы проверки микрофона на Mac

Существует два способа проверки работы микрофона – через системные настройки громкости или сторонние приложения. Рассмотрим оба из них.

• Системные настройки микрофона

Прежде чем тестировать работу внешнего микрофона, вначале потребуется подключить его к Mac, а далее выполнить следующие действия:

• открыть приложение «Системные настройки»;
• перейти в настройку «Звук»;
• найти вкладку «Ввод»;
• выбрать микрофон, который будем проверять;
• отрегулировать громкость звука и произнести слова в микрофон.

При нормальной работе на звуковых барах загорается громкость звучания, что указывает на готовность работы устройства на ввод.

Микрофон относится к устройствам ввода, поэтому пользователь сам определяет его необходимость его применения. Если ваш Mac обнаруживает микрофон из приложения «Системные настройки», но приложение его не может обнаружить, это может быть связано с разными факторами. Чтобы проверить, в чем состоит проблема, следует запустить тестирование микрофона в веб-браузере, для чего:

• открываем веб-браузер и находим приложение для тестирования микрофона ;
• нажимаем справа кнопку воспроизведения;
• браузер запросит разрешить доступ к микрофону, что и следует сделать;
• после этого потребуется произнести в микрофон несколько фраз;
• в небольшом окошке под тестовой зоной отразися графическое изменение звука и его громкости.

Вывод

Тестирование микрофона на macOS с помощью приложений не распространено. Но можно найти несколько бесплатных приложений, которые позволят контролировать состояние микрофона, уровень громкости и включение/выключение.

Если вы недовольны работой встроенного индикатора громкости микрофона, можно загрузить бесплатный инструмент, такой как Audacity, и с помощью него отрегулировать звук вручную.

Источник

How to Live Mon­i­tor Your Micro­phone Input on Mac

George Tinari

26 Jan 2016

Whether you run a podcast or like recording musical covers, you can probably benefit from live monitoring your audio input. That is, with the input turned on, the sounds you input are automatically fed through the output so you hear back the sounds as you’re making them. The effect is similar to using a microphone on stage and hearing the sound instantly pump through the speakers around you.

Learn how to automatically hear the sounds you input | Shutterstock

Having this feature is important for testing out your microphone’s volume level, the proximity to the speaker, audio quality and more. Perhaps you also just want to capture a bit more reverb. Here are two ways on the Mac to enable live monitoring for free.

Download AudioMonitor

AudioMonitor is a free application for OS X that lets you monitor and edit the audio input coming into your Mac. You can download it at Softpedia. Note that it downloads as “MTCoreAudio” but for our intents and purposes, the application itself is AudioMonitor.

When you download the program, it’ll reveal itself as a package of contents. The only one you need to be interested in is AudioMonitor. Drag that icon over to the Applications folder on your Mac to install the program. Feel free to discard the rest.

Once you can launch AudioMonitor from Applications, you’ll notice it’s a very basic and lightweight app. Before you turn on live monitoring, make sure you select the proper input at the top. If you’re using your Mac’s microphone, keep the Built-In Microphone and Internal Microphone options selected. Otherwise, choose the name of your accessory in the drop down menu when it’s connected.

Also verify the output source is correct at the bottom. When you’re all set, click Play Through to turn on live monitoring. You can test it out by turning up the volume on your computer and speaking into the microphone. You should hear your own voice play back to you in realtime, which means live monitoring is working.

Use GarageBand

GarageBand is typically used for musical instruments and recording projects, but if you don’t want to download a new app, GarageBand also has a live monitoring feature. I prefer using AudioMonitor because it’s way more lightweight and straightforward, but GarageBand works fine too.

All you need to do is open GarageBand and make sure you’re starting on a blank slate, i.e. not opening a previously worked on file. For your new project, select Empty Project then click Choose.

GarageBand will ask you about your input settings. Select Record using a microphone or line input at the top. Then underneath, make sure the checkbox to the right is ticked that reads I want to hear my instrument as I play and record.

Proceed to your new project and you’ll notice your first track has a lit icon that looks like an upside Wi-Fi signal. That’s live monitoring, enabled. Make sure you have a pair of headphones ready, then try speaking into your mic to test out hearing your own voice.

Last updated on 8 Feb, 2018
The above article may contain affiliate links which help support Guiding Tech. However, it does not affect our editorial integrity. The content remains unbiased and authentic.

Read Next

How to Make Your Mac Read Out Documents, Emails, and Webpages

If you have difficulties seeing, making your # Mac read out content is pretty straightforward. This article runs through how to do it.

Best Ways to Fix Safari Can’t Find Server on Mac

Are you facing frequent can’t find server issues in # Safari # browser for # Mac? Here’s how to troubleshoot the problem.

How to Lock an Image in Microsoft Word

Does the position of the images on your Microsoft Word document move with every edit? Find out how to lock the images to get a more organized document.

How to Add or Remove Admins on Mac

If you want to add or remove an admin on your # Mac, you’ve come to the right place. This article will walk you through both of these.

How to Use Universal Clipboard on Mac

Sharing content across your Apple devices is simple, and Universal Clipboard is the best tool for doing this. Here’a how to activate the feature and use it.

How to Check and Optimize Your Mac’s Storage

Check and optimize your # Mac hard drive # space to declutter and speed up your computer.

How to Unblock a Number on Your iPhone and Mac

Want to unblock someone’s number on your # iPhone and # Mac? Here’s what you need to do.

5 Best Tweaks for Mac’s Display Settings to Enjoy Better Visuals

If you’re looking for tips on changing your # Mac display settings, this guide will walk you through several options to achieve this.

Did You Know

Since its launch, Shazam has been used more than 30 billion times to identify songs.

Источник