Microsoft windows perflib bits

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

The eventlog of one of my Windows Server 2012 servers regularly shows errors with eventid 1008 and 1018.

I already tried troubleshooting following these suggestions but that doesn’t help: http://technet.microsoft.com/en-us/library/cc774913%28WS.10%29.aspx (there is not even a ini file for the dll). Anyone familiar with this issue?

Answers

open services.msc from Start Search box, and check the following services.

WMI Performance Adapter

Background Intelligent Transfer Service

Windows Management Instrumentation

Please double-click on one of them, stop the service and then start it. If no error message is received, the service works properly.

Follow the steps below to rebuild performance counters on the computer that are corrupted

1. Click Start->All Programs->Accessories, right-click on «Command Prompt» and click «Run as administrator».

2. At the command prompt, type the following commands. Please press Enter after each line.

3. Wait until you receive the following message, and then type exit:

Info: Successfully rebuilt performance counter setting from system backup store

Then, check if the issue is resolved.

All replies

maybe look over here?

The link you have is for windows 2008

Which dll is your 1008 referencing?

Since there can be multiple reasons for the error 1008 and 1018, would you please post the entire error messages of event ID 1008 and 1018?

In these scenario, we can provide further assistance. Thanks for your understanding.

In addition, although the link below applies to Windows 2008, it may be helpful to you:

Event ID 1018 — Performance Library Availability

here are all the errors that are logged in the eventvwr

Microsoft windows perflib bits

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

Am facing the following errors in the Windows 10 x64 Pro event log.

Event ID: 1008 — Source: Microsoft-Windows-Perflib — Desc: The Open Procedure for service «WmiApRpl» in DLL «C:\WINDOWS\system32\wbem\wmiaprpl.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

Event ID: 1023 — Source: Microsoft-Windows-Perflib — Desc: Windows cannot load the extensible counter DLL rdyboost. The first four bytes (DWORD) of the Data section contains the Windows error code.

Event ID: 2004 — Source: Microsoft-Windows-PerfNet — Desc: Unable to open the Server service performance object. The first four bytes (DWORD) of the Data section contains the status code.

Event ID: 1008 — Source: Microsoft-Windows-Perflib — Desc: The Open Procedure for service «MSDTC» in DLL «C:\WINDOWS\system32\msdtcuiu.DLL» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

Event ID: 1008 — Source: Microsoft-Windows-Perflib — Desc: The Open Procedure for service «Lsa» in DLL «C:\Windows\System32\Secur32.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

Event ID: 1008 — Source: Microsoft-Windows-Perflib — Desc: The Open Procedure for service «ESENT» in DLL «C:\WINDOWS\system32\esentprf.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

Event ID: 1008 — Source: Microsoft-Windows-Perflib — Desc: The Open Procedure for service «BITS» in DLL «C:\Windows\System32\bitsperf.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

Event ID: 1018 — Source: Microsoft-Windows-Perflib — Desc: Disabled performance counter data collection for this session from the «ASP.NET_64_2.0.50727» service because the performance counter library for that service has generated one or more errors. The errors that forced this action have been written to the application event log.

Event ID: 1022 — Source: Microsoft-Windows-Perflib — Desc: Windows cannot open the 64-bit extensible counter DLL ASP.NET_64_2.0.50727 in a 32-bit environment. Contact the file vendor to obtain a 32-bit version. Alternatively if you are running a 64-bit native environment, you can open the 64-bit extensible counter DLL by using the 64-bit version of Performance Monitor. To use this tool, open the Windows folder, open the System32 folder, and then start Perfmon.exe.

wmiaprpl.dll (WMI Performance Adapter)
msdtcuiu.DLL (Distributed Transaction Coordinator)

under services.msc (they are set to manual)

note sure about the other items though and should I set it to running/automatic?

Note that SFC / Scannow resulted in: «Windows Resource Protection did not find any integrity violations.»

Microsoft windows perflib bits

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

Question

I have an interesting group of errors that always trigger at 3:00 AM Event ID 2001, 1023, 1000 and 1008. I will show the errors below and what steps I have done so far. See attached image for event log.

This Server 2008 Standard SP2 64bit it is the DC

Below is each error in order from bottom to top.

The Open Procedure for service «.NETFramework» in DLL «C:\Windows\system32\mscoree.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code. Error 1/22/2013 1008

The Open Procedure for service «ASP» in DLL «C:\Windows\system32\aspperf.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code. Error 1/22/2013 1008

The Open Procedure for service «ASP.NET_64_2.0.50727» in DLL «C:\Windows\Microsoft.NET\Framework64\v2.0.50727\aspnet_perf.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code. Error 1/22/2013 1008

The Open Procedure for service «BITS» in DLL «C:\Windows\system32\bitsperf.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

The Open Procedure for service «DirectoryServices» in DLL «C:\Windows\system32\ntdsperf.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

The Open Procedure for service «DNS» in DLL «C:\Windows\system32\dnsperf.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

The Open Procedure for service «ESENT» in DLL «C:\Windows\system32\esentprf.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

Unable to read the first counter index value from the registry. The error code returned by the registry is data DWORD 0. EVENT ID 1001

The Open Procedure for service «InetInfo» in DLL «C:\Windows\system32\infoctrs.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

The Open Procedure for service «MSDTC» in DLL «C:\Windows\system32\msdtcuiu.DLL» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

Unable to collect the FTP performance statistics. The error code returned by the service is data DWORD 0.

The Open Procedure for service «MSFTPSVC» in DLL «C:\Windows\system32\ftpctrs2.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

The Open Procedure for service «PSched» in DLL «C:\Windows\system32\pacerprf.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

The Open Procedure for service «RemoteAccess» in DLL «C:\Windows\system32\rasctrs.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

Windows cannot load the extensible counter DLL TermService. The first four bytes (DWORD) of the Data section contains the Windows error code.

Unable to read the «First Counter» value under the usbperf\Performance Key. Status codes returned in data.

The Open Procedure for service «usbhub» in DLL «C:\Windows\system32\usbperf.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

Setting up Web Service counters failed, please make sure your Web Service counters are registered correctly.

The Open Procedure for service «W3SVC» in DLL «C:\Windows\system32\inetsrv\w3ctrs.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.

A note my backup runs at the time. Steps I have taken so far.

To restart the W3SVC:

• Open an elevated Command Prompt window. Click Start, point to All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
• At the command prompt, type NET STOP W3SVC.
• At the command prompt, type NET START W3SVC.

ASP.NET 2.0, 64-bit version

Ensure that the counters are not disabled in the registry

The counters may be disabled via registry settings. Please check the following registry locations to ensure that the counters have not been disabled.

HKLM\System\CurrentControlSet\Services\%servicename%\Performance

%servicename% represents any service with a performance counter. For example: PerfDisk, PerfOS, etc.

There may be registry keys for «DisablePerformanceCounters» in any of these locations. As per the following TechNet article, this value should be set to 0. If the value is anything other than 0 the counter may be disabled.

A value of 1 means the counter is disabled.
A value of 2 means the 32-bit counter is disabled.
A value of 4 measn the 64-bit counter is disabled.

Rebuilding all performance counters including extensible and third-party counters

To rebuild all Performance counters including extensible and third-party counters, type the following commands at an Administrative command prompt. Press ENTER after each command.

Rebuilding the counters:
cd c:\windows\system32
lodctr /R
cd c:\windows\sysWOW64
lodctr /R

Resyncing the counters with Windows Management Instrumentation (WMI):
WINMGMT.EXE /RESYNCPERF

Stop and restart the Performance Logs and Alerts service.
Stop and restart the Windows Management Instrumentation service.

Create a new Data Collector Set (do not use an existing Data Collector Set).

There are a few other things I have done but these errors persist. Let me know what other steps I can take. Thank you for your time.

Windows 10 perflib 1008 error

How do I get rid of this perflib 1008 error

Log Name: Application
Source: Microsoft-Windows-Perflib
Date: 9/18/2015 3:44:10 PM
Event ID: 1008
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Eduardo-PC
Description:
The Open Procedure for service «WmiApRpl» in DLL «C:\WINDOWS\system32\wbem\wmiaprpl.dll» failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.
Event Xml:

Replies (5) 

Thank you for posting your query in Microsoft Community.

I understand your concern, and we in Community will try to help you in the best possible way we can.

Method 1:
I would suggest you to run System File Checker.

System File Checker is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files. (Also applicable for Windows 10)
https://support.microsoft.com/en-us/kb/929833?wa=wsignin1.0

Method2:
I would also suggest you to Run DISM or System Update Readiness tool

Windows corruption errors may prevent Windows updates from installing. For example, an update might not install if a system file is damaged. The DISM or System Update Readiness tool may help you to fix some Windows corruption errors. (Refer to Windows 8/8.1 also applicable to Windows 10)
https://support.microsoft.com/en-us/kb/947821

Hope the information helps, if you have any further queries, feel free to post. We are here to assist you.

30 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.