MultiBeast 12.3.0 Update
MacMan
Administrator
MultiBeast, the ultimate post-installation utility, has been updated to version 12.3.0 for macOS Catalina 10.15.5+.
MultiBeast is an all-in-one post-installation utility designed to enable boot from a hard drive. It also features a collection of drivers and customization options.
Please make sure to read the documentation provided in the MultiBeast Features document and at MultiBeast.com for all install locations and details. Download the latest version of MultiBeast at tonymacx86.com/downloads.
Do not upload MultiBeast to any other sites or redistribute.
The health of this site and continued development depend on this being the only source.
UI:
Expanding an outline choice for the first time takes two clicks. Subsequent choice expansions work as expected.
NOTE:
MultiBeast 12 only supports installation to disks formatted as GUID Partition Table (GPT). This is due to all kexts being installed in EFI partition under /EFI/CLOVER/kexts/Other.
If you have Bug Reports or Feature Requests, please let us know in the MultiBeast section of the forum. If this utility has helped you, please consider a contribution to support further MultiBeast development. Thanks in advance, and enjoy!
Источник
UniBeast: Install macOS Catalina on Any Supported Intel-based PC
tonymacx86
Administrator
The following guide is a complete walkthrough for updating to or installing a fresh version of macOS Catalina. It requires no experience and all of the basic installation and post-installation tools are available on tonymacx86.com.
Table of Contents
Before You Begin
- Register here at tonymacx86! If you don’t have a user account, create one!
- Get our latest UniBeast and MultiBeast tools from the downloads section.
- Purchase a 16GB or 32GB USB drive.
- Do a full backup of your system. We strongly recommend performing a full backup of your existing system using Carbon Copy Cloner. By doing this, you can always go back to your working installation.
UniBeast is a tool that creates a bootable installer out of your downloaded version of macOS. In order to start fresh, you’ll need access to a functional computer running OS X Mountain Lion 10.8.5 or later. This is a requirement, as you need access to the Mac App Store to download macOS and create the installation drive. To start from scratch, booting the 10.6 Snow Leopard Retail DVD directly, check out iBoot + MultiBeast.
Existing Clover users may do a direct update to macOS Catalina by simply running the Install macOS Catalina app as normal Mac users would. Follow these steps: Update Directly to macOS Catalina.
Clover Note: UniBeast delivers basic bootloader support based on our testing on recommended CustoMac systems. For further bootloader customization, download and run the official Clover package. Advanced users may also compile Clover by downloading the full source.
If you have issues reaching the installer, you can use spacebar on boot screen to enter alternate boot modes such as verbose and safe mode. For more instructions on entering boot flags see Clover Basics and Switching Advice.
STEP 5: Post Installation with MultiBeast
MultiBeast is an all-in-one post-installation tool designed to enable boot from hard drive, and install support for Audio, Network, and Graphics. The installation is complete, but the drive isn’t bootable yet. Boot from the USB again, this time choosing Catalina.
- Press the hotkey to choose boot device (F12 for Gigabyte motherboards, F8 for ASUS motherboards, F11 for ASrock motherboards)
- Choose USB
- At the Boot Screen, choose your new Catalina installation.
- Complete macOS setup
- Open and run MultiBeast
Yay! You now have a fully updated bootable version of macOS Catalina on your CustoMac! And a super handy USB rescue drive. It’s easy to get frustrated, but don’t give up! If you get stuck, there are many users with similar hardware in the tonymacx86 Forum to provide support.
Thanks to all of the hard working developers, hackers, and testers all over the world without whom this guide would never have been possible.
Troubleshooting and Optimizations:
After you’ve completed the guide, things such as HDMI audio and iMessage may not work automatically. The list below should serve to fully optimize your system after initial setup.
This list will be updated.
Clover Note: UniBeast and MultiBeast deliver basic bootloader support based on our testing on recommended CustoMac systems. For further bootloader customization, download and run the official Clover package. Advanced users may also compile Clover by downloading the full source.
Contains Clover 5.0 r5106
UniBeast and MultiBeast contain and deliver files from the Clover EFI Bootloader project. Clover is an open source bootloader project based on different projects: Clover, rEFIt, XNU, VirtualBox. Copyright © 2019 CloverHackyColor. Source and official downloads are available here.
Developers:
Slice, with help of Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman, Download-Fritz, Zenit432, cecekpawon…
Source code credits to:
Intel, Apple, Oracle, Chameleon, rEFIt and Xom. Copyright © 2012-2020
Источник
MultiBeast 4.7.0 — Lion 2016-04-29
THIS PACKAGE MAY NOT BE UPLOADED OR HOSTED ANYWHERE ELSE.
MultiBeast 4.7.0 Released 2012-12-23
Visible Changes:
— Renamed EasyBeast Install to EasyBeast Installation
— Renamed UserDSDT Install to UserDSDT or DSDT-Free Installation
— Renamed Drivers & Bootloaders -> Kexts & Enablers to Drivers & Bootloaders -> Drivers
— Removed Drivers & Bootloaders -> Drivers -> Audio -> Realtek ALC8xx -> Unified Device Injector
— Removed Drivers & Bootloaders -> Drivers -> Audio -> Realtek ALC8xx -> AppleHDA Rollback
— Renamed Drivers & Bootloaders -> Drivers -> Audio -> Realtek ALC8xx -> Patched AppleHDA to With DSDT
— Renamed Drivers & Bootloaders -> Drivers -> Audio -> Realtek ALC8xx -> Non-DSDT HDAEnabler to Without DSDT
— Added Drivers & Bootloaders -> Drivers -> Audio -> Universal -> VoodooHDA VT2021 0.2.7.2
— Renamed Drivers & Bootloaders -> Drivers -> Disk -> 3rdParty SATA to 3rd Party SATA
— Renamed Drivers & Bootloaders -> Drivers -> Disk -> 3rdParty eSATA to 3rd Party eSATA
— Changed Drivers & Bootloaders -> Drivers -> Disk -> TRIM Enabler to a Menu Choice
— Added 10.7.0 — 10.7.4 TRIM Patch to Drivers & Bootloaders -> Drivers -> Disk -> TRIM Enabler
— Added 10.7.5 TRIM Patch to Drivers & Bootloaders -> Drivers -> Disk -> TRIM Enabler
— Added 10.7.5 netkas ATI 48xx Patch to Drivers & Bootloaders -> Drivers -> Graphics -> ATI 48xx Support.
— Renamed 10.7.2 / 10.7.3 Combo OpenCL Enabler to 10.7.2 — 10.7.4 Combo OpenCL Enabler to reflect that it only works with 10.7.2, 10.7.3 and 10.7.4.
— Added 10.7.5 >2GB OpenCL Patch to Drivers & Bootloaders -> Drivers -> Graphics -> NVIDIA 4xx/5xx Support.
— Renamed Drivers & Bootloaders -> Drivers -> Miscellaneous -> USB 3.0 — NEC/Renesas and Etron to USB 3.0 — 3rd Party
— Removed Bootloaders -> Drivers -> Network -> maolj’s AtherosL1cEthernet
— Added versions to all choices in Bootloaders -> Drivers -> Network
— Added Bootloaders -> Drivers -> Network -> Atheros — Shailua’s ALXEthernet v1.0.2
— Renamed Bootloaders -> Drivers -> Network -> hnak’s AppleIntelE1000e Ethernet to Intel — hnak’s AppleIntelE1000e v2.1.7
— Renamed Bootloaders -> Drivers -> Network -> Lnx2Mac’s RealtekRTL81xx Ethernet v0.0.90 to Realtek — Lnx2Mac’s RealtekRTL81xx v0.0.90
— Renamed Bootloaders -> Drivers -> Network -> Realtek Gigabit Ethernet 2.0.6 for 10.7 to Realtek — AppleRTL8169Ethernet 2.0.6 for 10.7
— Added Drivers & Bootloaders -> Drivers -> System
— Moved Patched AppleIntelCPUPowerManagement to Drivers & Bootloaders -> Drivers -> System
— Added OS X 10.7.5 to Drivers & Bootloaders -> Drivers -> System -> Patched AppleIntelCPUPowerManagement
— Moved AppleACPIPlatform Rollback to Drivers & Bootloaders -> Drivers -> System and renamed it to AppleACPIPlatform Rollback for ASUS X58 Systems
— Moved AppleRTC Patch for CMOS Reset to Drivers & Bootloaders -> Drivers -> System
— Renamed IOUSBFamily Rollback to Legacy USB Support and moved it to Drivers & Bootloaders -> Drivers -> System
— Renamed Customization -> Themes -> Chameleon RC5 Default to Chameleon 2.0 Default
— Renamed Customization -> Themes -> tonymacx86 Remixed to tonymacx86
— Renamed Customization -> Themes -> SSDT to SSDT Options
— Moved SSDT Options from Customization -> Boot Options to Customization
— Added Verbose Boot to Customization -> Boot Options
— Removed System Utilities
— Removed Extension Migration Tool
Internal Changes:
— Fixed VoodooHDA 0.2.7.3 install to delete AppleHDA.kext.
— Updated hnak’s AppleIntelE1000e Ethernet to v2.1.7.
— Updated Chimera to v1.11.1
— Changed Drivers & Bootloaders -> Drivers -> Realtek ALC8xx -> Without DSDT to also install appropriate patched AppleHDA
— Fixed EasyBeast and UserDSDT install to delete previous version of FakeSMC.kext if found.
MultiBeast 4.6.1 Released 2012-06-25
Internal Changes:
— Fixed patched AppleIntelCPUPowerManagement postinstall script to delete NullCPUPowerManagement.kext.
MultiBeast 4.6.0 Released 2012-06-25
Visible Changes:
— Added AppleACPIPlatform Rollback to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous
— Added OS X 10.7.4 Ivy Bridge to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous -> Patched AppleIntelCPUPowerManagement
— Renamed Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> ALC8xxHDA to Unified Device Injector
— Added ALC8xxHDA to Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> Unified Device Injector
— Added ALC8xxHDA for Legacy ALC888 and ALC888b/887 to Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> Unified Device Injector
— Changed Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> Patched AppleHDA -> ALC887/888b to a menu choice.
— Renamed Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> Patched AppleHDA -> ALC887/888b to ALC888b/887
— Added v100202 Legacy to Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> Patched AppleHDA -> ALC888b/887
— Added v100302 Current to Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> Patched AppleHDA -> ALC888b/887
— Changed Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> Patched AppleHDA -> ALC888 to a menu choice.
— Added v100202 Legacy to Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> Patched AppleHDA -> ALC888
— Added v100302 Current to Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> Patched AppleHDA -> ALC888
— Renamed Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> Patched AppleHDA -> ALC885/889a to ALC889a/885
Internal Changes:
— Updated Chimera to v1.10.0
MultiBeast 4.5.2 Released 2012-05-29
Internal Changes:
— Updated FakeSMC to include missing keys.
— Fixed installation of AppleHDA Rollback.
MultiBeast 4.5.1 Released 2012-05-18
Visible Changes:
— Removed flAked SpeedStepper in Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous
— Added Patched AppleIntelCPUPowerManagement to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous
— Added OS X 10.7.2 to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous -> Patched AppleIntelCPUPowerManagement
— Added OS X 10.7.3 to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous -> Patched AppleIntelCPUPowerManagement
— Added OS X 10.7.4 to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous -> Patched AppleIntelCPUPowerManagement
MultiBeast 4.5.0 Released 2012-05-17
Visible Changes:
— Added Customization -> Boot Options -> SSDT
— Added Core i5 to Customization -> Boot Options -> SSDT
— Added Core i7 to Customization -> Boot Options -> SSDT
— Added Core i5/i7 Overclocked to Customization -> Boot Options -> SSDT
— Added netkas ATI 48xx Patch for 10.7.4 to Graphics -> ATI 48xx Support.
Internal Changes:
— Updated ALC8xxHDA to v2.0.3 which adds Mute to ALC892 codec.
— Updated toleda’s patched AppleHDA.kext for ALC887/888b for an incorrect PathMapID.
MultiBeast 4.4.1 Released 2012-05-13
Visible Changes:
— Renamed 10.7.2 / 10.7.3 Combo OpenCL Enabler to 10.7.2+ Combo OpenCL Enabler to reflect that it works with 10.7.2, 10.7.3 and 10.7.4.
Internal Changes:
— Updated ALC8xxHDA to v2.0.2 which fixes an issue with ALC887/888b codecs.
— Updated toleda’s patched AppleHDA.kext for ALC887/888b with a corrected version.
MultiBeast 4.4.0 Released 2012-05-09
Visible Changes:
— Added toleda’s patched AppleHDA’s to Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> Patched AppleHDA
— Added ALC898 to Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8xx -> Non-DSDT HDAEnabler.
— Added HWMonitor Application to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous -> FakeSMC Plugins.
Internal Changes:
— Updated Chimera to v1.9.2
— Updated ALC8xxHDA to v2.0.1
— Update FakeSMC to v4.2.0 rev609
— Update FakeSMC Plugins to v4.2.0 rev609+
— Updated hnak’s AppleIntelE1000e Ethernet to v1.9.5. Changed install location to /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns.
MultiBeast 4.3.2 Released 2012-04-14
Internal Changes:
— Removed IOUSBFamily Rollback from EasyBeast Installations.
— Updated Chimera to v1.9.1
— Fixed installation error with maolj’s AtherosL1cEthernet. Changed install location to /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns.
MultiBeast 4.3.1 Released 2012-03-18
Internal Changes:
— Removed 10.7.2 / 10.7.3 Combo OpenCL Enabler from EasyBeast and UserDSDT install as it breaks OpenCL support on NVIDIA non-Fermi (8xxx, 9xxx and 2xx) cards.
MultiBeast 4.3.0 Released 2012-03-12
Visible Changes:
— Renamed NVIDIA GF100 Fermi Patches to NVIDIA 4xx/5xx Support
— Renamed OpenCL Enabler 10.7.0 / 10.7.1 to 10.7.0 / 10.7.1 netkas OpenCL Enabler
— Removed OpenCL Enabler 10.7.2
— Added 10.7.2 / 10.7.3 Combo OpenCL Enabler. This new enabler contains the functionality from the old OpenCL Enabler plus adds cmf’s OpenGL patch and MacMan’s patch to add the missing NVIDIA device IDs.
— Renamed ATI 48xx Patches to ATI 48xx Support
— Moved ATI 48xx Device Injector to ATI 48xx Support -> ATI 48xx Device Injector
— Renamed all ATI 48xx Patch for 10.7.x to 10.7.x netkas ATI 48xx Patch
— Added netkas ATI 48xx Patch for 10.7.3 to Graphics -> ATI 48xx Support
— Added flAked SpeedStepper to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous
— Added 10.7.0 & 10.7.1 SpeedStepper v1.2 by flAKed to flAked SpeedStepper
— Added 10.7.2 SpeedStepper v1.2 by flAKed to flAked SpeedStepper
— Added 10.7.3 SpeedStepper v1.2 by flAKed to flAked SpeedStepper
— Added maolj’s AtherosL1cEthernet to Drivers & Bootloaders -> Kexts & Enablers -> Network
— Removed OSx86 Software. The programs in this choice are now available for download at http://www.tonymacx86.com/downloads.php?do=cat&id=10.
Internal Changes:
— Updated Chimera to v1.8.0
— Added 10.7.2 / 10.7.3 Combo OpenCL Enabler to EasyBeast and UserDSDT installs.
— Changed npci=0x2000 to npci=0x3000 for all kernel flags.
— Removed backup function from any script that was backing up and patching kexts.
— Updated IntelCPUMonitor to v1.0.1 rev505
MultiBeast 4.2.1 Released 2011-12-17
Internal Changes:
— Fixed invalid serial number for iMac12,1
— Fixed invalid serial number for iMac12,2
— Fixed invalid serial number for MacBookPro6,1
MultiBeast 4.2.0 Released 2011-12-14
Visible Changes:
— Added TRIM Enabler to Drivers & Bootloaders -> Kexts & Enablers -> Disk
— Added AppleRTC Patch for CMOS Reset to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous
Internal Changes:
— Updated Chimera to v1.7.0
— Updated USB 3.0 kext to v1.0.8
— Updated FakeSMC Plugins -> AMD RADEON Plugin
— Updated FakeSMC Plugins -> NVIDIA Plugin
— Added AppleRTC Patch for CMOS Reset to EasyBeast
— Added AppleRTC Patch for CMOS Reset to UserDSDT
— Added AppleRTC Patch for CMOS Reset to Extension Migration Tool
MultiBeast 4.1.0 Released 2011-11-09
Visible Changes:
— Updated EasyBeast description to include all org.chameleon.Boot.plist options used, all file names and all installation locations.
— Updated UserDSDT description to include all org.chameleon.Boot.plist options used, all file names and all installation locations.
— Updated each kext description to include the exact file names and installation location.
— Updated descriptions for Customization -> Boot Options and all sub-choices.
— Updated description for System Utilities and removed Rebuild Caches as it is no longer relevant in Lion.
— Replace VoodooPS2Controller and VoodooPS2TrackPad with PS/2 Keyboard/Mice and Trackpads which is 32/64-bit.
— Added ATI 48xx Patch for 10.7.2 from netkas to Graphics
— Added NVIDIA GF100 Fermi Patches to Graphics
— Moved NVIDIA Fermi OpenCL Enabler 10.7.0 / 10.7.1 under NVIDIA GF100 Fermi Patches and renamed it OpenCL Enabler 10.7.0 / 10.7.1
— Added OpenCL Enabler 10.7.2 to Graphics -> NVIDIA GF100 Fermi Patches.
Internal Changes:
— Updated Lnx2Mac’s RTL81xx Ethernet to v0.0.90.
— Updated Realtek Gigabit Ethernet to v2.0.6 for 10.7
— Updated Chimera to v1.6.0
— Updated USB 3.0 kext to v1.0.7.
— Updated 3rdParty SATA to v0.3 which adds support for Marvell 88SE9172.
— Updated 3rdParty eSATA to v0.3 which adds support for Marvell 88SE9172.
— Added darkwake=0 to EasyBeast and UserDSDT /Extra/org.chameleon.Boot.plist kernel flags.
— Added UseKernelCache=Yes to EasyBeast and UserDSDT /Extra/org.chameleon.Boot.plist.
— Added GenerateCStates=Yes and GeneratePStates=Yes to UserDSDT /Extra/org.chameleon.Boot.plist.
— Changed EasyBeast to boot 64-bit kernel by default.
MultiBeast 4.0.3 Released 2011-10-17
Internal Changes:
— Fixed bug in Chimera post install script.
MultiBeast 4.0.2 Released 2011-09-14
Visible Changes:
— Restored USB 3.0 to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous.
Internal Changes:
— Fixed EasyBeast to correctly install IOUSBFamily Rollback.
MultiBeast 4.0.1 Released 2011-09-12
Internal Changes:
— Fixed Extension Migration Tool to correctly add UseKernelCache=Yes to /Extra/org.chameleon.Boot.plist.
MultiBeast 4.0.0 Released 2011-09-12
Источник
