Netgear wna3100 linux driver

Netgear N-300/ WNA3100 USB-адаптер для Ubuntu 16.04

Я новичок в Linux и Ubuntu, и у меня возникают проблемы с подключением к Интернету.

У меня есть USB-адаптер Netgear WNA3100, и в моих дополнительных драйверах ничего нет.

3 ответа

Вы можете добавить поддержку для Netgear N-300/ WNA3100 USB Adapter установив ndiswrapper и загрузка сетевого драйвера Windows.

Установите модули ndiswrapper

Активируйте ndiswrapper:

Загрузите драйвер в ndiswrapper:

Перейдите туда, куда вы сохранили драйвер (посмотрите на Download Windows Netgear Drivers раздел ниже):

Загрузите драйверы Windows Netgear

Вы можете скачать драйвер с сайта NetGear: WNA3100 Drivers. Единственное, что вам нужно из пакета загрузки, это WNA3100 папка.

Примечание: вам нужно только wine для извлечения WNA3100.zip пакет из setup.exe файл с сайта Netgear. После запуска setup.exe Вы найдете пакет zip в:

Я использовал тот же адаптер Wi-Fi для Ubuntu 14.04 и 15.04, он работал нормально для меня. Если у вас есть подключение к локальной сети, сделайте обновление.

sudo apt-get update

Убедитесь, что сеть включена, и попробуйте подключиться вручную из мастера сети.

Проверьте следующее руководство для установки драйвера Windows в Ubuntu

Поддерживаемые USB-адаптеры от Ubuntu:

Пожалуйста, не удаляйте это сообщение, даже если это не ответ. Я убежден, что это поможет многим пользователям.

Я просто хочу поделиться своим опытом (особенно для пользователей, которые не имеют USB-адаптер Wi-Fi и хотят купить один).

У меня только что был худший опыт. После каждого обновления ядра оно не работало, и мне пришлось использовать много сложных команд, чтобы заставить его работать. Интернет дает 1000 различных решений, и только некоторые из них могут работать (тратя часы и часы). И когда я перезагружаю или кладу свой компьютер в режим сна, соединение Wi-Fi никогда не было автоматическим. Я должен был включить и снова! такая боль

Чтобы избежать такой головной боли, я только что купил карту PCIe WiFi (tp-link ac1900. Я думаю, что другие карты PCIe также работают хорошо, но я не пробовал их. Я просто вставил эту карту в свой компьютер, затем открыл дополнительную меню драйвера и включил проприетарный драйвер Broadcom. Теперь моя карта работает как шарм. Я потерял немного денег, потому что я купил USB Wi-Fi бесплатно, но я гораздо более рад сэкономить свое время и приятный пользовательский опыт Linux.

Кроме того, есть много разных размеров слотов PCI. Обычно беспроводные карты pcie имеют размер x1. Мой компьютер не имеет x1, но я поместил карту в слот x16 pcie, и теперь он полностью совместим.

Я знаю, что не отвечаю на вопрос прямо. Но я надеюсь, что мой пост будет полезен для некоторых пользователей.

Источник

WNA3100M — N300 Wireless USB Adapter

Model / Version: WNA3100M

Top Support Articles

User Guides and Documentation

Documentation

Installation Guide

Product Data Sheet

User Manual

Firmware and Software Downloads

Current Versions

Software Version 1.2.0.9

File size: 52.6 MB

Previous Versions

Software Version 1.2.0.7

File size: 52.6 MB

Software Version 1.2.0.6

File size: 68.6 MB

Software Version 1.2.0.5

File size: 68.6 MB

Software Version 1.2.0.4

File size: 62.3 MB

Software Version 1.2.0.3 (Win8.1 WHQLed Driver)

File size: 50.2 MB

Software Version 1.1.0.4 (Win8 WHQLed Driver)

File size: 67.5 MB

Software Version 1.0.0.17

File size: 37.9 MB

Software Version 1.0.0.10

Articles

Show: Knowledge Base Articles Community Questions

Can’t find what you’re looking for?

Quick and easy solutions are available for you in the NETGEAR community.

Complimentary Support

NETGEAR provides complimentary technical support for NETGEAR products for 90 days from the original date of purchase.

NETGEAR Premium Support

GearHead Support for Home

A single point of support around the clock. GearHead Technical Support makes it easy to fix issues on not just your NETGEAR purchase but for your entire home network. The service includes support for the following:

• NETGEAR and non-NETGEAR network devices
• Desktop and Notebook PCs, Printers, Scanners, and more
• Windows Operating Systems, MS Office, Outlook, and more

Learn More

NETGEAR ProSupport for Home

Protect and support your recent NETGEAR purchase. With NETGEAR ProSupport for Home, extend your warranty entitlement and support coverage further and get access to experts you trust.

• Protect your investment from the hassle of unexpected repairs and expenses
• Connect with experienced NETGEAR experts who know your product the best
• Resolve issues faster with 24/7 service

Learn More

NETGEAR ProSupport for Business

NETGEAR ProSupport for Business services are available to supplement your technical support and warranty entitlements. NETGEAR offers a variety of ProSupport for Business services that allow you to access NETGEAR’s expertise in a way that best meets your needs:

• Product Installation
• Professional Wireless Site Survey
• Defective Drive Retention (DDR) Service

Learn More

Источник

WNA3100 — N300 Wireless USB Adapter

Model / Version: WNA3100

Top Support Articles

User Guides and Documentation

Documentation

Installation Guide

Product Data Sheet

User Manual

Firmware and Software Downloads

Current Versions

Software Version 2.2.0.4 (Supports Win10)

File size: 52 MB

Previous Versions

Software Version 2.2.0.2 (Supports Win8.1)

File size: 78.4 MB

Software Version 2.1 (Supports Win8)

File size: 107 MB

Software Version 2.0

File size: 34.8 MB

Software Version 1.1.3.22

Software Version 1.1.2.16

Articles

Show: Knowledge Base Articles Community Questions

Can’t find what you’re looking for?

Quick and easy solutions are available for you in the NETGEAR community.

Complimentary Support

NETGEAR provides complimentary technical support for NETGEAR products for 90 days from the original date of purchase.

NETGEAR Premium Support

GearHead Support for Home

A single point of support around the clock. GearHead Technical Support makes it easy to fix issues on not just your NETGEAR purchase but for your entire home network. The service includes support for the following:

• NETGEAR and non-NETGEAR network devices
• Desktop and Notebook PCs, Printers, Scanners, and more
• Windows Operating Systems, MS Office, Outlook, and more

Learn More

NETGEAR ProSupport for Home

Protect and support your recent NETGEAR purchase. With NETGEAR ProSupport for Home, extend your warranty entitlement and support coverage further and get access to experts you trust.

• Protect your investment from the hassle of unexpected repairs and expenses
• Connect with experienced NETGEAR experts who know your product the best
• Resolve issues faster with 24/7 service

Learn More

NETGEAR ProSupport for Business

NETGEAR ProSupport for Business services are available to supplement your technical support and warranty entitlements. NETGEAR offers a variety of ProSupport for Business services that allow you to access NETGEAR’s expertise in a way that best meets your needs:

• Product Installation
• Professional Wireless Site Survey
• Defective Drive Retention (DDR) Service

Learn More

Источник

Linux Mint Forums

Welcome to the Linux Mint forums!

HOWTO: Netgear WNA3100 wireless adapter on LMDE (64-bit)

HOWTO: Netgear WNA3100 wireless adapter on LMDE (64-bit)

Post by Schoelje » Wed Jan 18, 2012 11:54 am

There are many posts on this subject but none seemed to work on LMDE 64-bit.
Finally got it working because dmesg gave me the missing link: step 3.

1. Connect the WNA3100 and:

It should list:
Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231]

2. Get the latest ndiswrapper source:
http://sourceforge.net/projects/ndiswrapper
At moment of writing: v1.57

3. Unpack in /usr/src
Or any other directory

4. Make sure to uninstall everyting you have on ndiswrapper:

(yes, even ndiskgtk and mintwifi because they have dependencies with ndiswrapper 1.56)

5. This step is not entirely necessary although it made my connection a bit more stable:

5. Make sure the WNA3100 is NOT connected.

6. cd /usr/src/ndiswrapper-1.57

should show v1.57

7. Copy the drivers (attached to this tutorial) to /drivers/wna3100 (or any other directory)

• bcmh43xx.cat
  bcmh43xx64.cat
  bcmwlhigh5.inf
  bcmwlhigh5.sys
  bcmwlhigh564.sys

8. Connect the WNA3100

11. Check if your wlan is up:

Edit: changed order — no code editing needed.
However, I noticed very unstable data transfer: hangs with copying «large» (300MB) files.
So, if anyone has experience with that, let me know.

Edit: thanks to nordlichreiter (see below) you can improve the stability of the connection by limiting the up and downstream:

Re: HOWTO: Netgear WNA3100 wireless adapter on LMDE (64-bit)

Post by shparks » Wed Feb 01, 2012 6:17 pm

Well i went through this and it seemed to be working, in fact it actually does work for about 5 minutes and then for some unknown reason the conenction drops.

confusing. I had to edit the usb.c as the first time round it black screened on me.

Here’s the output —

ndiswrapper -v
utils version: ‘1.9’, utils version needed by module: ‘1.9’
module details:
filename: /lib/modules/3.0.0-12-generic/misc/ndiswrapper.ko
version: 1.57
vermagic: 3.0.0-12-generic SMP mod_unload modversions

# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11g ESSID:»BTHub3-6MRH»
Mode:Managed Frequency:2.412 GHz Access Point: CC:96:A0:37:82:BA
Bit Rate=144 Mb/s Tx-Power:32 dBm
RTS thr:2347 B Fragment thr:2346 B
Encryption key:3575-BC64-7059-CD58-8874-1454-3A38-9F9C Security mode:restricted
Power Management:off
Link Quality:79/100 Signal level:-45 dBm Noise level:-96 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:17 Invalid misc:32495 Missed beacon:0

As you can see there are a large nuber of invalid misc counts.

I’m quite new to linux and feel i have been running round like a headless chicken trying to ‘troubleshoot’ this, to no avail!

any help would be great!

Re: HOWTO: Netgear WNA3100 wireless adapter on LMDE (64-bit)

Post by Schoelje » Sat Feb 04, 2012 7:18 pm

What’s the output of:
dmesg | grep ndis

By the way: WNA3100 crashed when copying large files (+200MB).
Netgear affirmed they’re not going to build linux firmware for it so I bought a 10m long UTP cable and spend time on other things.

Re: HOWTO: Netgear WNA3100 wireless adapter on LMDE (64-bit)

Post by giancon » Sun Feb 26, 2012 8:29 am

got it to work following your howto except for the edit to usb.c. I eventually had to restore the original lines of code. As «shparks» stated, though, it works for a few minutes and then drops the connection. Also, I haven’t been able to keep the connection up long enough to complete the login into my ISP account. In any case, this is the best I’ve been able to get from this adapter out of three different distros and countless howtos. Looks as if the driver/firmware suffers from the usual lack of support from the manufacturer. So, the thing just works «when it feels like it» .

Re: HOWTO: Netgear WNA3100 wireless adapter on LMDE (64-bit)

Post by Schoelje » Mon Feb 27, 2012 6:08 am

Re: HOWTO: Netgear WNA3100 wireless adapter on LMDE (64-bit)

Post by Spewed » Thu Mar 15, 2012 6:17 am

Hey, first and foremost thank you for the guide and I hope it will eventually work for me.

Right now it’s not working and I hope that you can help me so that I can get down to fixing my WNA3100.
First of all, I uninstalled Ndiswrapper from the Software Center(I’m using Ubuntu 11.10). Once I did that, I entered the command «Ndiswrapper -v» To check my version, it still showed I had version 1.56 on there. So, I took a shot in the dark, downloaded the 1.57 source files that you have linked. From there, I logged in as root and navigated to the directory that I installed it and did «Make uninstall». That seemed to do the trick, because when I entered «ndiswrapper -v» it showed there was no ndiswrapper version my the machine. After that, I followed the «make» and «make install» commands. It showed that I was still using version 1.56.

Is there anything I can do from here?

Sorry to bother you, it’s just that I have been at this all day and it is quite frustrating. Hopefully you can help me.

Also, I do have the drivers for my adapter card installed. I went ahead and proceed through the rest of the tutorial just to be sure. It didn’t work, so I’m assuming it is because of the version that I’m on(I know you have to change things around in version 1.56.» I’d rather not deal with all of that, if there is an easy way around it by following your tutorial and using version 1.57.

Источник

Linux Mint Forums

Welcome to the Linux Mint forums!

Install usb wifi Netgear WNDA3100v3

Install usb wifi Netgear WNDA3100v3

Post by cldjean » Thu Jul 06, 2017 12:21 pm

I want to install an usb wireless Netgear WNDA3100v3 on my Computer HP Compaq 6510b running with Linux Mint 18.1.

I followed the HOWTO: Netgear WNA3100 wireless adapter on LMDE (64-bit) on this forum. But I can’t go further than step 7 because I don’t know how to find the compatible drivers with the Ndiswrapper 1.61 which is the last version of Ndiswrapper.

Can someone help me to find this drivers and to complete the installation ?

Re: Install usb wifi Netgear WNDA3100v3

Post by JeremyB » Thu Jul 06, 2017 5:02 pm

Re: Install usb wifi Netgear WNDA3100v3

Post by cldjean » Thu Jul 06, 2017 5:15 pm

Re: Install usb wifi Netgear WNDA3100v3

Post by JeremyB » Thu Jul 06, 2017 5:28 pm

Re: Install usb wifi Netgear WNDA3100v3

Post by youstupiddarkness » Thu Jul 06, 2017 8:20 pm

Re: Install usb wifi Netgear WNDA3100v3

Post by JeremyB » Thu Jul 06, 2017 8:58 pm

Re: Install usb wifi Netgear WNDA3100v3

Post by cldjean » Fri Jul 07, 2017 2:48 am

Thank you for all your advices. I’ve completed your instructions and I’ve rebooted the computer.

What are the next steps ?

Re: Install usb wifi Netgear WNDA3100v3

Post by JeremyB » Fri Jul 07, 2017 6:09 am

Re: Install usb wifi Netgear WNDA3100v3

Post by cldjean » Fri Jul 07, 2017 8:20 am

Here is the result

$ modprobe -c | grep 9014; iwconfig
alias usb:v0846p9014d*dc*dsc*dp*ic*isc*ip* ndiswrapper
alias usb:v0846p9014d*dc*dsc*dp*ic*isc*ip*in* mt7662u_sta
alias usb:v1199p9014d*dc*dsc*dp*ic*isc*ip*in* qcserial
ens1 no wireless extensions.

wlp16s0 IEEE 802.11abg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=off
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off

lo no wireless extensions.

Re: Install usb wifi Netgear WNDA3100v3

Post by JeremyB » Fri Jul 07, 2017 10:09 am

Re: Install usb wifi Netgear WNDA3100v3

Post by cldjean » Fri Jul 07, 2017 10:24 am

Here are the results

$ ndiswrapper -l
rt2870 : driver installed
device (0846:9014) present (alternate driver: mt7662u_sta)
peace@peace-HP-Compaq-6510b-KE131ET-ABF

Re: Install usb wifi Netgear WNDA3100v3

Post by JeremyB » Fri Jul 07, 2017 1:11 pm

Re: Install usb wifi Netgear WNDA3100v3

Post by cldjean » Fri Jul 07, 2017 4:28 pm

What are the next steps ?

Re: Install usb wifi Netgear WNDA3100v3

Post by JeremyB » Fri Jul 07, 2017 4:37 pm

Re: Install usb wifi Netgear WNDA3100v3

Post by cldjean » Fri Jul 07, 2017 5:03 pm

sudo lshw -c net; iwconfig; cat /etc/modprobe.d/ndiswrapper.conf
[sudo] Mot de passe de peace :
*-network DÉSACTIVÉ
description: Interface réseau sans fil
produit: PRO/Wireless 3945ABG [Golan] Network Connection
fabriquant: Intel Corporation
identifiant matériel: 0
information bus: pci@0000:10:00.0
nom logique: wlp16s0
version: 02
numéro de série: 00:1f:3c:83:a2:1c
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwl3945 driverversion=4.4.0-83-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11abg
ressources: irq:31 mémoire:e4100000-e4100fff
*-network
description: Ethernet interface
produit: NetLink BCM5787M Gigabit Ethernet PCI Express
fabriquant: Broadcom Corporation
identifiant matériel: 0
information bus: pci@0000:18:00.0
nom logique: ens1
version: 02
numéro de série: 00:1f:29:9a:b9:a2
taille: 1Gbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=sb v2.09 ip=192.168.1.40 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
ressources: irq:32 mémoire:e4000000-e400ffff
ens1 no wireless extensions.

wlp16s0 IEEE 802.11abg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=off
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off

lo no wireless extensions.

alias usb:v0846p9014d*dc*dsc*dp*ic*isc*ip* ndiswrapper

Источник