Netinstall ������ ��� ���

Восстановление оборудования на базе RouterOS MikroTik с помощью инструмента Netinstall

Данная статья ориентирована на решение проблем связанных со сбоями во время обновления и в следствии отсутствием доступа на MikroTik маршрутизаторы. Подобные проблемы в большинстве случаев решаемы, и решаемы с помощью утилиты от MikroTik – Netinstall (скачать утилиту можно бесплатно с официального источника). Кроме самой утилиты рекомендуется выполнить следующие пункты:

Скачать актуальный образ прошивки (ПО доступно на официальном сайте MikroTik

На время обновления отключить все имеющиеся у вас средства мониторинга и защиты (антивирусы, брандмауэр).

Назначить сетевому интерфейсу вашего ПК адрес 192.168.88.2

Скачать Winbox.exe с официального источника MikroTik.

Все условия выполнены? Тогда приступим к восстановлению нашего MikroTik.

Перед началом восстановления маршрутизатор нужно выключить.

1. Используя патч-корд, подключите ваш ПК к первому интерфейсу MikroTik (ether1)

2. Запустите Netinstall с правами администратор и в Net Booting -укажите IP адрес, отличный от вашего ПК. Например: 192.168.88.1

3. Нажав и удерживая кнопку Reset, включите маршрутизатор.

4. Удерживайте кнопку до тех пор, пока индикатор ACT не начнет и не закончит моргать (примерно секунд 20). После того, как вы отпустили кнопку, в поле Routers/Drivers утилиты Netinstall должен появиться ваш маршрутизатор (если не появился, подождите несколько секунд).

5. После того, как нужное вам устройство появилось, щелкните на него мышкой и выберите для него необходимую прошивку (в поле From: необходимо указать путь до папки с прошивкой).

6. Нажмите кнопку «Install» и ожидайте завершения обновления.

7. После окончания обновления нажмите кнопку «Reboot». После перезагрузки устройства откройте утилиту winbox.exe и перейдите на вкладку Neighbors, нажмите Refresh.

В поле Neighbors должно появиться ваше устройство с адресом 0.0.0.0.

После того как устройство появилось, щелкните на MAC address устройства и нажмите кнопку Connect, чтобы попасть в меню управления маршрутизатором.

Для того, чтобы сбросить устройство до заводских конфигураций откройте New Terminal в окне WinBox и выполните команду /system reset-configuration

После перезагрузки роутер будет доступен с конфигурацией по умолчанию 192.168.88.1/24

На этом процесс восстановления ПО для маршрутизаторов MikroTik считается законченным.

Источник

Netinstall ������ ��� ���

If you are already running RouterOS, upgrading to the latest version can be done by clicking on «Check For Updates» in QuickSet or System > Packages menu in WebFig or WinBox.

See the documentation for more information about upgrading and release types.

To manage your router, use the web interface, or download the maintenance utilities. Winbox to connect to your device, Dude to monitor your network and Netinstall for recovery and re-installation.

routeros-mmips-6.49.npk	MD5	d04e6045404402414cbe74d70ea3e297
	SHA256	ea5c8b6fde2b71b8332fb2e4ab7bc029a52853bfe6a3f3ce09411946cbcd53a1
routeros-mipsbe-6.49.npk	MD5	c0c3c400e453cb4d67ef8e23547bcdca
	SHA256	36d352bf04d40d2b034bc453e306643eb58eea73a0ef76b341346f8c99102bdf
routeros-smips-6.49.npk	MD5	635bd8ea97472a5df1bb83b33b9f9fbd
	SHA256	7e7330c0793719ce6c88b709f3361848334f3f902ea0bb91d015615641bbdfb1
routeros-arm64-6.49.npk	MD5	4169fdd596cfc3fc9bbf65a495870217
	SHA256	d48b86af16c3a57be9ec37ad04bcba2ac409d228456db6ebedc014d880924082
routeros-arm-6.49.npk	MD5	f4950dd778bdfe4bac539bf7bc5c26da
	SHA256	0e8cdc39ecefd3882d630c5f9d77ac57943fe070c8ee19559b6750db39185912
routeros-tile-6.49.npk	MD5	dd2e0bf1f494dc48c5693de665acc13f
	SHA256	ff51a885c4be1ae53760ae6098c4ccafa22e451ee2969ee231ce986c3737dc51
routeros-powerpc-6.49.npk	MD5	eb8c3d938fdcb848f2b289063d675c20
	SHA256	850b39bd40d702868a72b2e601ba80035fb40f9f0b749a917e30d6942e1218f0
routeros-x86-6.49.npk	MD5	842bdcb6dba8cb9e927abd2f0ad4ac03
	SHA256	7d6ac9890d8d8e59c06613f33421125bfdb28f05360bf32add195f2b632ede21
all_packages-x86-6.49.zip	MD5	5b1a4876242323deb06e3474c3b6cb97
	SHA256	2b95927eb13bbd61d3a3a561b9c52d7be4e77e0f45335e5a455ba055465e3c51
all_packages-mipsbe-6.49.zip	MD5	13d7911b118df04e8e16eb6e61375b58
	SHA256	d45c0d889c5b916b49ffd63b741965488d210d1ba66d5522e6790379d6d9cb9d
all_packages-smips-6.49.zip	MD5	f9889bcab3df3a5dc7a447366afecbbb
	SHA256	9e40c7be7ab3e021740af075244cdc81470d70b89e933be064f6f148067492b7
all_packages-arm64-6.49.zip	MD5	c0b82532c769f02aecab9fb2c890c065
	SHA256	6eb1d5f6101ccb9678040536abb3b3238a9db891f8c5ace8129b8c0fe1feba70
all_packages-arm-6.49.zip	MD5	bba15e642701bef095a4ad603ea323ae
	SHA256	671e360f78e33c67a3ad6048ccb5c2103e9626c6bf797e89b571bfb326571d4c
all_packages-tile-6.49.zip	MD5	5ca2c9f73762f3eac7e5869c8a64150c
	SHA256	237df8494ed6c08a8918c49e9c5475852cbbc73018de107ceeecaa070fd5fc72
all_packages-ppc-6.49.zip	MD5	0de7f67e6ac4a0d1c54b35109fcf0dfd
	SHA256	7f571fb2f7e7615b513d9460e0b7aa80708e82238ee17eb0036272a5a274fcee
all_packages-mmips-6.49.zip	MD5	caf82c391b2848abddbb5ce5c6ee1fdc
	SHA256	94574e2fa363376be9df7def385949f80af4c9a413fcb25d6d824bc3623c3ebd
mikrotik-6.49.iso	MD5	61a4983daedd9e9ae4bb287217c0000d
	SHA256	348f75956a335d5fd0217b8a92208bc8dee187265837bf6d0a8f408ac49ca06b
netinstall-6.49.zip	MD5	adf3873e2ba3aeb0d8ad7a3ab3795974
	SHA256	8eb251733097a52300a6a4bcfdc03a5d4df4c8891f1154a78b213948ab42b7a3
install-image-6.49.zip	MD5	4e05c9f4421f41b9dce5be01d3875ed1
	SHA256	407f6e78b649c23882ddc7b834f0dc5fa27e50039dcc20858c9f98214a91b542
dude-6.49-arm64.npk	MD5	29dbebf0ecfacaf6bc6fc690393e58d6
	SHA256	ce217e060925901436dd1b308ece119b3f122d25afe5aea71bb7589513481dee
dude-6.49.npk	MD5	8c330185c2868a13ca214ce2aa16e2b3
	SHA256	4b81e159b66610643d38b5742ec9369099541008d9be29415ac14cf286eba4f6
dude-6.49-tile.npk	MD5	20d92443939fe9f205e638734cd85935
	SHA256	51071628fce266474d332303ee14c132c819cbfbe535b99b381a624870cac421
dude-6.49-arm.npk	MD5	df6614e31acd02c2038895afea516d68
	SHA256	952b2866f5db9b13ee0a152f1f190b50c5f005084441fd9168f964e482356c51
dude-6.49-mmips.npk	MD5	50ef4a65ea13e35f07d48c3b142f1ebe
	SHA256	e8a5648317c5d602c5412526fe97e5938dcdd61e9ab9596284b3d6b24fad63d3
dude-install-6.49.exe	MD5	1616cc7d39fa57b787cf857448199d25
	SHA256	8f6b9be020270c4dbd3a6c4f22350df271645a4c629b47d1acc7fa96bb78bd0d
netinstall64-6.49.zip	MD5	cb306ab48575be720ffce2744dabad37
	SHA256	f2aa77750a69570b97dff1076dc3c9c44baec5da0d47090cd1c12b1b393d3d0e
netinstall-6.49.tar.gz	MD5	c6c5d21af8d31b20325621348ad61ae7
	SHA256	b68864c6aa081a97efb3e6cc27f3d9f49fdc0c3fc89dd2b1ed680d574209206b
btest.exe	MD5	8079e2384ca795e56a8b4f497d675778
	SHA256	5502cb4ff509f513b990691ccf537b7fe8c26e863ecac6ba27455e9ac2508315
mikrotik.mib	MD5	c5f3905e29200701be6f092585c3aab0
	SHA256	f000355e097f6857c527898a1898fddc95274eeb2df780815447eaeb50334dab
flashfig.exe	MD5	95572c9b4e39d8e4c9c3d536ba146133
	SHA256	3280ecc51772e1aaaa8c9f1ad70d7e97514b05b8ccc722c1b71bf155a50796c4

×

routeros-mipsbe-6.49rc2.npk	MD5	8aea0c6857cfecb1646d9d260c55d954
	SHA256	ef09d82af37f7e1cdc03d778cc593a9df0e60e76007b4f45abe09254044c677d
routeros-smips-6.49rc2.npk	MD5	1c450a1f4f863bdf530e423057b70ccf
	SHA256	b30beb245271f0b8ae77bf41072ad523531eee137d4bf2686cca90d1b61377b0
routeros-arm64-6.49rc2.npk	MD5	c82d2adfe9241f2c1e38134f850a27f7
	SHA256	b78dbbd6be98a23219bf600b091add845e14b049325d0dd07e03ef0d15007417
routeros-arm-6.49rc2.npk	MD5	316f1783360a4b53366fa784cc13beaa
	SHA256	d5a8883be94292ffed97a807b2eaf20d0df916fa9e6c172bcdaa5c9fa564a233
routeros-tile-6.49rc2.npk	MD5	3f4d4cce14e2faeaefc6732a1f51422e
	SHA256	4b95c808d65936e6cc44f4403c9d16ba58e4b3d2e332432ac134693fdeddc3d2
routeros-mmips-6.49rc2.npk	MD5	671545582cef191354c1180eedadcd9d
	SHA256	9d6817a0aaa300f5fc763d6d4b6dbf13033f64695bad2646fb98dcae8a6c3268
routeros-powerpc-6.49rc2.npk	MD5	8e57eeb374f34a2a72283057e105bfe3
	SHA256	3a0c990d402884f17d9394ad97272dd05e3d9366c9c6d83368addf8e4fe60738
routeros-x86-6.49rc2.npk	MD5	d8ea3d3a66c0e9e929c2dbe733327b2a
	SHA256	6e7a7df99149b558b90e275d1fd43243bab9471d8fd1adaf4f895f8a0d8487a6
all_packages-ppc-6.49rc2.zip	MD5	0123979f01210b5db6e7b54a0cb0824a
	SHA256	66d64929ed32dc8c303f21bbd4f97a6060070005963c04f7ef99e4e4c2356242
all_packages-mipsbe-6.49rc2.zip	MD5	d69698b2f37bd8bcba04db1f493b9d4f
	SHA256	7c254121d5294ede089e0332ea264f3d2f4359024ecf3f5b6d8660e7c7b9dbc2
all_packages-smips-6.49rc2.zip	MD5	eebfc1440d4ea7d353e1ee44ec66e59c
	SHA256	b7bae7f31d4c9d89e63997bdb96cf098231491259326f9394290331b83a96279
all_packages-arm64-6.49rc2.zip	MD5	c34ff56b5f64ad82994b66e5477d322c
	SHA256	4177286ff451b5288660a0610404d2833865f61f604c82166040b5643d3e4d4b
all_packages-arm-6.49rc2.zip	MD5	564eeb18f2d52c1784dc97eb6ba35f70
	SHA256	8a86d2858f691093cf6c884cb373a3aa87132ed7164521c763443d2d583cc806
all_packages-tile-6.49rc2.zip	MD5	7f62d8a282c9b0c92a14026eefc07bb7
	SHA256	f81294a7723d9bfc4d88903d8fda4224a65e22a3d5d6141ce9e06562c5684651
all_packages-mmips-6.49rc2.zip	MD5	9ba1811a0b0f328c128534d215063c36
	SHA256	990df948f8837aeae4121769476ed16dea880b70ae9218fd576d0007f59049de
all_packages-x86-6.49rc2.zip	MD5	66c7710776284b7e4ead9ca3f49abdf1
	SHA256	1b79dcdc115d599157ec3f10544d3c1f2acb97fbf01d8251ad5edd806899aab2
mikrotik-6.49rc2.iso	MD5	5eaca6457c7f28acbcae165bdb1e8759
	SHA256	e7e8c7121a5734fb03877a461feefc716ee58b394ace007f4c44d98f36feab2c
netinstall-6.49rc2.zip	MD5	77f5ac4a0c8474334a4049a76ec93178
	SHA256	7d8ddcc428dcbb40cff26d7338a3e2ce7767b1d51c90956cfdc1ed2121d619ed
install-image-6.49rc2.zip	MD5	7d400a9220af88931077317110c6dc01
	SHA256	b6a19db97711abcc4c86026efb6a62fd902e9ba55bc3fed69b9920493ca10908
dude-6.49rc2.npk	MD5	b3dfec37d7ab0226049ef7ebe883685e
	SHA256	5eadcffc8a4f4773ac56f480de40a681c7f70e368cc8712dee242d98ddfb4328
dude-6.49rc2-arm.npk	MD5	34b57336bf92c2a4adab813b77517de1
	SHA256	7a8c750a8d1cf330ae40de02f72e737b2362f89c72546326d2dd9d873755b194
dude-6.49rc2-tile.npk	MD5	17fd76ef39a5b72ea1e1da0f6672cb19
	SHA256	38f26fb9d393dbd47d29e1c6aa19d0f751c25193c49d6e388cfe937ac0f40d75
dude-6.49rc2-arm64.npk	MD5	116f739ecfceb84136aeb1497d89b05d
	SHA256	13f548990bab91b005f67139a0721c8612da696c81674fa23a0d88b998b96dce
dude-6.49rc2-mmips.npk	MD5	575e2da82c20e7dcb5999aac6787bad5
	SHA256	4d9e6a727c8d38433fd485a13a9adc5d481e259a9ef801ad5c7e429367c7e578
dude-install-6.49rc2.exe	MD5	a14a474d4bbd952ecefc1196e17a8a81
	SHA256	25b0b83d45948a1bfd0df4e919f0b80d0acabc03103ea59df20c85a6692dc0bf
netinstall64-6.49rc2.zip	MD5	8caca1d874b81937d19fd24e97898f3b
	SHA256	d4082866027f9932248307e8c8beb9bb6404d71a49c0b0b629ff752ec61925cb
netinstall-6.49rc2.tar.gz	MD5	95f32120b0b16f9ab1158a54b304e861
	SHA256	65ce580d0a05d5e514f65b287127490a8e3408570e3cc9b9d252bacbabc7c1b7
btest.exe	MD5	8079e2384ca795e56a8b4f497d675778
	SHA256	5502cb4ff509f513b990691ccf537b7fe8c26e863ecac6ba27455e9ac2508315
mikrotik.mib	MD5	c5f3905e29200701be6f092585c3aab0
	SHA256	f000355e097f6857c527898a1898fddc95274eeb2df780815447eaeb50334dab
flashfig.exe	MD5	95572c9b4e39d8e4c9c3d536ba146133
	SHA256	3280ecc51772e1aaaa8c9f1ad70d7e97514b05b8ccc722c1b71bf155a50796c4

×

routeros-powerpc-6.48.5.npk	MD5	67810db8eb252a6af4a8b74d3f621ad9
	SHA256	39558a7d6fc1a745aa1e903af384f70381567559aab11092a8a16a9280b20de7
routeros-x86-6.48.5.npk	MD5	1d0cfb6118960fb5181f50a22684a6c4
	SHA256	f9f41a0a44c487bf0f23f4e25ca21aa459b1ee4d1e053c8390948df81687805f
routeros-arm64-6.48.5.npk	MD5	5a385851c1baf28f33be0028996a5cb9
	SHA256	c8cd6b4a79bdd7df359f689fb82aabbd27f82a5126046b58eca2baa1ebf27fa6
routeros-mmips-6.48.5.npk	MD5	8d7000e7a2f6532d5e26ca620505ef2d
	SHA256	4e1871a8d1ec1c208e10281390e73737a83832d824f6f422a2313d003460eed5
routeros-mipsbe-6.48.5.npk	MD5	8579c8cd0c2137a2536128a41b07ad0f
	SHA256	e04a1fcb9187682ac44e06c0e46fbcc9270289d9df3d0cd0a332dbe8f6950a02
routeros-arm-6.48.5.npk	MD5	bcd47d42d809f0e7fdde130c264df8e4
	SHA256	b046a387d9c573b4d0fe029325aea61a2f07bb1858a4f27262b63f2f611f0a5b
routeros-smips-6.48.5.npk	MD5	f5e737a10fac1697bb0a032ac3eeb6a3
	SHA256	8e68b273bf750b6531d5b8117253f4e2b2aa684fa9c71ad5be0c90b589516959
routeros-tile-6.48.5.npk	MD5	93f7f2c27c86e64fc6f4dd97f768710d
	SHA256	937134a4e6013862bcf67f5e0ad0fda78eb1fccdf0d4d037d8be2f88d1d123d0
all_packages-mipsbe-6.48.5.zip	MD5	e94d2ba56a4adf7fd8752a44acf7c135
	SHA256	12d58bc1770b603af3e57b9cd5098811181ce82b6bbeee5133ee4b3da6f13b84
all_packages-smips-6.48.5.zip	MD5	80a14dff9f7f41de3538738377a7e983
	SHA256	92582628d25db70f0fc0a21f115d90f50d4a2d91605ebe73639e88a2083ea4eb
all_packages-arm64-6.48.5.zip	MD5	0790d0cff386e1d279d1612008adec7d
	SHA256	017329e95dfb24af9799d626b9ef57f86364048dcc4e03f71e8e6da01b225cf8
all_packages-arm-6.48.5.zip	MD5	76a3526772ab452d53e9cbfa6f4ebf7b
	SHA256	23efaf26071669ac6c33d148275aee8f9999e05f0fb60f05be29c836e6e4f882
all_packages-tile-6.48.5.zip	MD5	5910a1556dc6b4064dc908eeb9c57090
	SHA256	6e8426a98cdaed180f2b092efcfa073f300cd6e6ad9232f0292c062eab0ae0a7
all_packages-ppc-6.48.5.zip	MD5	d83a9b372bed17aa0fc755d5be953605
	SHA256	32c8e082f74daa272501a082ff1b7b8278f2c16938340a305357d8d4ac04ef63
all_packages-x86-6.48.5.zip	MD5	cbf36ee04c51687ad3d402b4825878be
	SHA256	848e93753d46037e59a5d31e52deebfaedc0e711bb693affbca68afad58521c4
all_packages-mmips-6.48.5.zip	MD5	f2d4ffed2acf0649bb7f6f96ca667c9e
	SHA256	684b42a99f485d3e15e6afc0d05d99fedd6cb33cbadde9bd18d64bd8947f9e7e
mikrotik-6.48.5.iso	MD5	8041f805e4fe39b13f734fdf7eb2492a
	SHA256	1cdd6365e6cb622ad7e9a11e6946da1db15dfda142b89122c035f7e0ec1876ad
netinstall-6.48.5.zip	MD5	7ed225bdba2119449b88e31a5ed5e27f
	SHA256	0a0d4dbd2ceb35f88dee1bee2d7e2a50e3153153b5ce1f3280ed05d30b3306fa
install-image-6.48.5.zip	MD5	0e73cfe6481886b29507ca1abca81385
	SHA256	eace77ce56c42209b46a27a08d5fed44f1f94476e840c2c61f1991557fc6d90e
dude-6.48.5-arm64.npk	MD5	a65f609e432286ceb3b7c374bfac0f67
	SHA256	592be2263db21ba6b50854f4c33d3503f4a171955c91974bba53391d93cd0b35
dude-6.48.5-arm.npk	MD5	ffbe9d49eda08ecff3e5353abdcf29e4
	SHA256	68125b227aae566d420f80495593731a9b92cb9719cf58b2456e40b51fec3630
dude-6.48.5-mmips.npk	MD5	306c5f60b6536cb9d88ec7bd15c88caa
	SHA256	5a20febc6e7cae85624dfe62349c9b15b9dbca056d9ca8fbbefbc3e053e325fa
dude-6.48.5-tile.npk	MD5	ebb52d07f215f158e14009230a73dc01
	SHA256	338071acb4c8a1068ce73132a1fdde81e223d126c96c2a0296aae81043b283fe
dude-6.48.5.npk	MD5	7ad2e447ed3b4d313b84dbcd87685cb7
	SHA256	fcee100bf58c68a984c84b3b6f616f6476cf9b5efb28faf352c01494ff93b140
dude-install-6.48.5.exe	MD5	28c1e352b78d87a8642f30d5ec289cbe
	SHA256	5ea2f1c3f1bb0843ac00db319702ee196289ef204113a0e0b5fc4372962e8dc0
netinstall64-6.48.5.zip	MD5	329aa56d3017d0567a86b1002fae1490
	SHA256	a17052e5af1116d243f1d3fd71f61ff158fde6e22ffd4cbbbc2c2a45228ab8cf
netinstall-6.48.5.tar.gz	MD5	716a5368b71197b6d2543e32093f8178
	SHA256	6d2114b321b1f6c52fef0422cc267924ffbc518ef34f9859e1b83e67d6387bca
btest.exe	MD5	0f3237559e6ec7a83cd5fb631fe1c04d
	SHA256	a9eb5f990cf7209aea955e2e20993785064da4913e3565799fb68e8ef85113c9
mikrotik.mib	MD5	c5f3905e29200701be6f092585c3aab0
	SHA256	f000355e097f6857c527898a1898fddc95274eeb2df780815447eaeb50334dab
flashfig.exe	MD5	79a1300661d5710675851c9fa2a61b46
	SHA256	e66f567efd5ae292d9b1c1811bb9076b5d93045078c76627c5c3abcc837c0ca2

×

routeros-7.1rc4-arm64.npk	MD5	bc48551eaead6f0109751367a7c76d16
	SHA256	8293abe0548abce6ce588b951bcc74183ec162ade188e6ea11a8bc87068ae668
routeros-7.1rc4-mipsbe.npk	MD5	12620ce1cbf7bd2e2f8351f391075aec
	SHA256	afbfc2412429e76b3f15bfbd60de164f5e997f20ba6c8cea55b039bd1603471e
routeros-7.1rc4-arm.npk	MD5	5ba79dd72003d4cf84c44f75e391ae78
	SHA256	d0f8368231df24b76a1ade78d5aeb1fdea8d8a07ce14bbc374e9502fc22ff67e
routeros-7.1rc4-ppc.npk	MD5	cf72fc19bb24d87ebc952f9ed895c032
	SHA256	7d4cb49f73235d8337ddba0e56899a801da2a91c4f040089394cfa8f4bc1b0b1
routeros-7.1rc4-tile.npk	MD5	3e9b688127efe41dee318e19f39d908b
	SHA256	6875bcea516b55180648dbd0b2d5816f0b9992f5279aeba5839042375b5b7813
routeros-7.1rc4.npk	MD5	05e29e686354861aa3f64299998532f5
	SHA256	b3b3b271c0b32a99432106f623bc60c6d9ab5234bcee872c723d427bcfeb9cf1
routeros-7.1rc4-smips.npk	MD5	b973a87bd5cc758375025b50506a6304
	SHA256	c0c6ab937ef5f1351ab87cac4bde5340f0b9b361f8778f0d3c1c7dcb7976aee4
routeros-7.1rc4-mmips.npk	MD5	de23a485e0e66ed0f6f4e677a92e0268
	SHA256	bbb141259382586b4fc3e1fd9c167443f718df760bed6314e118dab54920c60a
all_packages-mmips-7.1rc4.zip	MD5	4ad4dbf7d66f95b5d0ce2d68a3e575f7
	SHA256	770629ff70eef12b6a1c17b01ae7c8ab3897e49af03246c82ebbd20428aa3e63
all_packages-tile-7.1rc4.zip	MD5	a9c40ef65d175334aa4fcf6d35950944
	SHA256	875bdf65b570dbfac70c10d44d2933613ac87829181adccae94fd910712ed9ca
all_packages-arm-7.1rc4.zip	MD5	86015e2f1e958827f9bb80c3802b6c27
	SHA256	b4a5442964b7f2819be5ce1414d47dca376f12c74283d64cdfb3fe1ffd5fbf0c
all_packages-smips-7.1rc4.zip	MD5	29c91f032e4f74b823f2b2e2a81e3a21
	SHA256	53fef2f51bd5ca90090973b79c08e630f56dabd3b1c57c584a1638053f6fd56e
all_packages-x86-7.1rc4.zip	MD5	e9f724bb84eee48b7e81433e173cfdfb
	SHA256	d507de5a9f4a83bcdd0c78322f51d1d8a71838ab17087097824801f81e641131
all_packages-mipsbe-7.1rc4.zip	MD5	671bf9640f65186ed2c9bf7f50c326be
	SHA256	017d729ce6767fa7a97fd1d11ec5cbbe8cf260eaaaf2e1dfe611a4493f9f6ca9
all_packages-ppc-7.1rc4.zip	MD5	e82b86aee1b73148384c76567186c03a
	SHA256	a50eb83319ebad09065e11cce0209f7d95d468540f7156db1eeb04ba980df60a
all_packages-arm64-7.1rc4.zip	MD5	32c868da527e7cf8dc2d8ff65f72836f
	SHA256	8d53686c20f382ef1228fed3fc5b466fdf87d6af36b3d5c105e180d74faefc90
mikrotik-7.1rc4.iso	MD5	3f479134ae8311f0a91b2c0bc190c25d
	SHA256	0ecb96aa0a54396ebabf195195fb8c72f3597ee668b89545a8885d66eacb405b
netinstall-7.1rc4.zip	MD5	1e597bc20d343375af6c7505bbddad48
	SHA256	4c521b4f9b5d70ec7a7d009e8af02b7861143fd0bc623f32cd56c979511344cd
install-image-7.1rc4.zip	MD5	edd17280bdc6420823056c7c7a0fa396
	SHA256	3ab6883ca80ca5626c707cfaf816b5efda2d9931e35ee664aff692de480f6960
dude-install-7.1rc4.exe	MD5	574c428022133d841bb3887551f57f73
	SHA256	4f7a8206ee97d9cd9d5d777eee83f66c8cf37ba83ca32ddd4782d1f7a2ad534d
netinstall64-7.1rc4.zip	MD5	c80aae4adf280c1b46db2136e2845bda
	SHA256	4dca46943bb3d762e1ec23409c3f0dac4f526012c566160e83740346f9cfadbe
netinstall-7.1rc4.tar.gz	MD5	e3e75d6a8b176db44c678a222539dfb5
	SHA256	ca9aaad587579922f5fdc4d8d883565f19dd8582b7b5d167af6eda6af058a30a
btest.exe	MD5	989bb896ba2475ffd023ff72f3c934f2
	SHA256	301796ac3f5a1aaf38adeab4b9e4ef6e923485a0e5cb4c01be07d415f135ab06
mikrotik.mib	MD5	d4aa2a6f1e1507669624c05d3a31aec7
	SHA256	35c0db5e517e64e5bca14f856fb889c8e8c2a22b8a8e54faf9278e83e16a0a2f
flashfig.exe	MD5	c36d54f4027aa4096b66dd31fc150d51
	SHA256	18bd27e414934fb83597952bc5e588bddb017207ef8087d44e3e4d066fbd5eeb

×

What’s new in 6.49 (2021-Oct-06 11:55):

*) branding — fixed LCD logo loading from branding package when installed via Netinstall;
*) branding — properly clean up old branding files before installing a new one;
*) bridge — added IGMP and MLD querier monitoring;
*) bridge — added IGMP snooping log when multicast table gets full;
*) bridge — fixed external flag in the host table for wireless clients;
*) bridge — improved controller bridge stability when adding RouterOS v7 port extender;
*) bridge — improved port extender stability when creating bond interfaces on excluded ports;
*) bridge — improved stability when quickly adding and removing bridge interface;
*) certificate — improved stability when removing dynamic CRL entries;
*) chr — fixed OS provisioning on Azure;
*) chr — improved stability when changing «flow-control» settings on interfaces with e1000 drivers;
*) conntrack — increased total connection tracking table size based on installed RAM size;
*) console — require «write+ftp» permissions for executing script to file;
*) console — require «write+ftp» permissions for printing to file;
*) crs3xx — correctly filter packets by L2MTU on 1Gbps Ethernet interfaces for CRS354 devices;
*) crs3xx — fixed LEDs for QSFP+ interface on CRS326-24S+2Q+ device;
*) crs3xx — fixed SFP and SFP+ link rate reporting (introduced in v6.48beta11);
*) crs3xx — fixed bridge controller and extender packet forwarding for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx — fixed default MAC address calculation on management Ethernet for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx — fixed interface flow control;
*) crs3xx — improved QSFP+ linking and mode changing for CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx — improved packet transmit on SFP+ interfaces;
*) crs3xx — improved switch resource allocation for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) defconf — apply default configuration from branding package when performing reset with button;
*) defconf — removed overlapping IPv6 firewall rules;
*) defconf — use router as DNS server for DHCP hosts;
*) dhcp-server — fixed DHCP Option decimal value parsing;
*) dhcpv4-server — reset dynamic «bcast» flag when receiving offer from DHCP relay;
*) dhcpv4-server — reset lease’s dynamic «bcast» flag on packets from relay;
*) dhcpv6-server — check if pool name has changed from RADIUS on renew;
*) dhcpv6-server — improved dynamic server entry update;
*) discovery — do not send discovery packets on interfaces that are blocked by STP (introduced in v6.48);
*) dns — fixed memory leak caused by large DNS replies;
*) firewall — fixed «ingress-priority» matcher;
*) firewall — fixed GRE protocol packets considered invalid when PPTP helper is disabled;
*) gps — improved interface monitoring;
*) health — added «phy-temperature» sensor monitoring for CRS312 device;
*) health — improved temperature readings on hEX S;
*) health — improved temperature reporting;
*) ike2 — added support for ASN.1 DN «my-id» value setting for initiators;
*) ike2 — check if TS is still valid after obtaining SPI;
*) ike2 — fixed initiator packet retransmit with DDOS cookie;
*) ipsec — fixed memory leak when processing DHCP packets;
*) ipsec — improved SA update by SPI;
*) ipsec — improved system stability on CHR;
*) ipsec — improved system stability on MMIPS devices;
*) kid-control — improved IPv6 firewall rule generation;
*) led — added LTE LED support for LHGGR;
*) leds — fixed LTE LED default mapping for wAP R ac LTE kit;
*) lora — added additional predefined network servers;
*) lora — added channel plan «il-917» for Israel;
*) lora — fixed «PULL_DATA» token generation;
*) m33g — improved support for «/system gpio» menu («/system routerboard upgrade» required);
*) m33g — removed 12..16 pins from «/system gpio» menu;
*) mipsbe — improved booting speed on non-NAND devices («/system routerboard upgrade» required);
*) mpls — allow to disable FastPath (CLI only);
*) mqtt — added server name indication;
*) netinstall — fixed lock file persistence after reinstall;
*) netinstall — improved bootp packet handling on Linux netinstall-cli version when multiple NIC’s are present;
*) netinstall — require Netinstall version to be the same or newer as «factory-software»;
*) ntp — use correct IPv6 multicast group for SNTP client;
*) package — always allow to uninstall package even if there is no free disk space left;
*) poe — update PoE firmware only on devices that supports it;
*) ppp — improved stability when receiving bogus response on modem channel;
*) qsfp — improved system stability when setting unsupported link rates;
*) quickset — use 5GHz interface’s country for «Home AP Dual» configuration;
*) routerboard — fixed «reformat-hold-button-max» validation for values below 10s;
*) sfp — added «sfp-rate-select» setting;
*) sfp — fixed GPON module linking (introduced in v6.47);
*) sfp — improved 25Gbps optical module stability and linking;
*) sfp — improved SFP, SFP+, SFP28 and QSFP+ interface stability for CRS3xx and CCR2004 devices;
*) sfp — improved link stability for 10G, 25G and 40G modules on CRS309, CRS312, CRS326-24S+2Q+ CRS354 and CCR2004 devices;
*) sfp28 — changed FEC auto mode to disabled;
*) snmp — added «engine-id» OID support;
*) snmp — fixed «ipNetToMediaType» OID for incomplete entries;
*) ssh — fixed «undo» functionality;
*) supout — added controller bridge section;
*) supout — print detailed list of active user sessions;
*) switch — fixed (R/M)STP port blocking right before switching them in HW bridge (fixes possible packet loop when changing bridge settings);
*) switch — improved packet transmit between CPU and 98PX1012 for CCR2004-1G-12S+2XS device;
*) swos — fixed «static-ip-address» parameter;
*) tr069-client — added «X_MIKROTIK_LinkDowns» parameter for interface «link-downs» value reporting;
*) tr069-client — added support for Ethernet link speed reporting;
*) tr069-client — added support for interface comment reporting and editing;
*) tr069-client — added support for supout file upload;
*) tr069-client — fixed traceroute diagnostics time values;
*) tr069-client — improved XML with new-lines for readable output;
*) tr069-client — improved stability for download/upload diagnostics;
*) upgrade — fixed free space checking on flash type memories when installing new packages;
*) ups — added battery info for APC Back-UPS BX750MI;
*) user — added «expired» user status with suggestion to change password (WinBox v3.29 required);
*) user — fixed active user session purging on disconnect;
*) user — show «expired password» prompt for users with blank password;
*) w60g — general stability and performance improvements;
*) w60g — limit power output when using region EU to match EN302567 on nRAY;
*) w60g — use EU region by default;
*) webfig — added support for logo image from branding package;
*) webfig — do not show value units twice;
*) webfig — fixed «Wireless/CAP» menu opening;
*) webfig — fixed interface sorting by name;
*) webfig — show only «Close» button under «Wireless/Wireless Sniffer/Sniffed Packets» menu;
*) winbox — added «dhcp» option to «multicast-helper» setting;
*) winbox — added «fec-mode» parameter under «Interface/Ethernet» menu;
*) winbox — added «interface-speed-100G» LED type to «System/LEDs» menu;
*) winbox — added «name» and «file-name» parameter when importing and exporting certificates;
*) winbox — added «sfp-shutdown-temperature» setting to SFP interfaces;
*) winbox — added SSH settings under «IP/SSH» menu;
*) winbox — added TFTP settings under «IP/TFTP/Settings» menu;
*) winbox — allow setting MCS (24-31) to 4×4 Wireless interfaces;
*) winbox — do not allow to add/remove W60G interfaces;
*) winbox — do not allow to set empty «init-string» field under «System/GPS» menu;
*) winbox — do not show «GPS antenna» selection for devices without selection support;
*) winbox — fixed «Secondary Frequency» parameter setting under «CAPsMAN/Channel» menu;
*) winbox — fixed DNS «cache-size» parameter setting;
*) winbox — fixed health reporting on RB960, hEX, hEX S and hAP ac3 devices;
*) winbox — fixed order of weekdays under «IP/Firewall» menu;
*) winbox — fixed support for «Delegated-IPv6-Prefix» for PPP services;
*) winbox — match «MAC Protocol-Num» predefined values under «Bridge/Filters» menu;
*) winbox — minimal required version is v3.30;
*) winbox — properly show «CRL Signature» field under «System/Certificate» menu;
*) winbox — separated CCQ Tx and Rx values in their own unique columns;
*) winbox — show «System/Health/Settings» only on boards that have configurable values;
*) winbox — show «current-channel» column by default for CAP interfaces;
*) winbox — show IPv6 address in separate field under «IP/Cloud» menu;
*) wireless — added U-NII-2 support for US and Canada country profiles for hAP ac lite;
*) wireless — added override for multicast-to-unicast translation of DHCP traffic;
*) wireless — do not remove channels >2462 MHz from «scanlist» if scanning for fixed channel;
*) wireless — do not send packet back to station-bridge it was received from;
*) wireless — fixed minor typo in debug logging messages;
*) wireless — improve WMM priority assignment for packets with internal priority greater than 7;
*) wireless — improve regulatory compliance with DFS requirements;
*) wireless — improve signaling of QCA9984 interface capabilities when using 160/80+80MHz channel width;
*) wireless — improved system stability when sending packets through interface after L2MTU is increased;
*) wireless — log client signal strength on disconnect;
*) wireless — renamed «secondary-channel» to «secondary-frequency»;
*) wireless — updated «israel» regulatory domain information;
*) wireless — updated «united kingdom» regulatory domain information;

What’s new in 6.49rc2 (2021-Sep-28 10:17):

Changes in this release:

*) bridge — improved controller bridge stability when adding RouterOS v7 port extender;
*) bridge — improved port extender stability when creating bond interfaces on excluded ports;
*) crs3xx — fixed bridge controller and extender packet forwarding for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) dhcp-server — fixed DHCP Option decimal value parsing;
*) discovery — do not send discovery packets on interfaces that are blocked by STP (introduced in v6.48);
*) sfp — added «sfp-rate-select» setting;
*) supout — added controller bridge section;
*) switch — fixed (R/M)STP port blocking right before switching them in HW bridge (fixes possible packet loop when changing bridge settings);
*) user — added «expired» user status with suggestion to change password (WinBox v3.29 required);
*) user — fixed active user session purging on disconnect;
*) user — show «expired password» prompt for users with blank password;
*) winbox — added «fec-mode» parameter under «Interface/Ethernet» menu;
*) winbox — minimal required version is v3.30;
*) wireless — improved system stability when sending packets through interface after L2MTU is increased;

Other changes since v6.48.4:

*) backup — fixed backup file restore (introduced in v6.49beta);
*) branding — fixed LCD logo loading from branding package when installed via Netinstall;
*) branding — properly clean up old branding files before installing a new one;
*) bridge — added IGMP and MLD querier monitoring;
*) bridge — added IGMP snooping log when multicast table gets full;
*) bridge — fixed external flag in the host table for wireless clients;
*) bridge — improved stability when quickly adding and removing bridge interface;
*) bridge — improved system stability when disabling IGMP/MLD querier port (introduced in v6.49beta22);
*) chr — fixed OS provisioning on Azure;
*) chr — improved stability when changing «flow-control» settings on interfaces with e1000 drivers;
*) conntrack — increased total connection tracking table size based on installed RAM size;
*) console — require «write+ftp» permissions for executing script to file;
*) console — require «write+ftp» permissions for printing to file;
*) crs3xx — correctly filter packets by L2MTU on 1Gbps Ethernet interfaces for CRS354 devices;
*) crs3xx — fixed LEDs for QSFP+ interface on CRS326-24S+2Q+ device;
*) crs3xx — fixed SFP and SFP+ link rate reporting (introduced in v6.48beta11);
*) crs3xx — fixed default MAC address calculation on management Ethernet for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx — fixed interface flow control;
*) crs3xx — fixed jumbo frame forwarding for CRS354 devices (introduced in v6.49beta36);
*) crs3xx — fixed packet forwarding on 1Gbps Ethernet interfaces for CRS354 devices (introduced in v6.49beta44);
*) crs3xx — improved QSFP+ linking and mode changing for CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx — improved packet transmit on SFP+ interfaces;
*) crs3xx — improved switch resource allocation for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx — improved system stability when learning MDB and FBD entries for CRS312, CRS326-24S+2Q+ and CRS354 devices (introduced in v6.49beta44);
*) defconf — apply default configuration from branding package when performing reset with button;
*) defconf — removed overlapping IPv6 firewall rules;
*) defconf — use router as DNS server for DHCP hosts;
*) dhcpv4-server — reset lease’s dynamic «bcast» flag on packets from relay;
*) dhcpv6-server — check if pool name has changed from RADIUS on renew;
*) dhcpv6-server — improved dynamic server entry update;
*) firewall — fixed «ingress-priority» matcher;
*) firewall — fixed GRE protocol packets considered invalid when PPTP helper is disabled;
*) gps — improved interface monitoring;
*) health — added «phy-temperature» sensor monitoring for CRS312 device;
*) health — improved temperature reporting;
*) ike2 — added support for ASN.1 DN «my-id» value setting for initiators;
*) ike2 — check if TS is still valid after obtaining SPI;
*) ike2 — fixed initiator packet retransmit with DDOS cookie;
*) ipsec — improved SA update by SPI;
*) ipsec — improved system stability on CHR;
*) ipsec — improved system stability on MMIPS devices;
*) kid-control — improved IPv6 firewall rule generation;
*) leds — fixed LTE LED default mapping for wAP R ac LTE kit;
*) lora — added additional predefined network servers;
*) lora — added channel plan «il-917» for Israel;
*) lora — fixed «PULL_DATA» token generation;
*) m33g — improved support for «/system gpio» menu («/system routerboard upgrade» required);
*) m33g — removed 12..16 pins from «/system gpio» menu;
*) mipsbe — improved booting speed on non-NAND devices («/system routerboard upgrade» required);
*) mpls — allow to disable FastPath (CLI only);
*) mqtt — added server name indication;
*) netinstall — fixed lock file persistence after reinstall;
*) netinstall — improved bootp packet handling on Linux netinstall-cli version when multiple NIC’s are present;
*) netinstall — require Netinstall version to be the same or newer as «factory-software»;
*) ntp — use correct IPv6 multicast group for SNTP client;
*) package — always allow to uninstall package even if there is no free disk space left;
*) poe — fixed PoE out functionality on CRS354 (introduced in v6.49beta22);
*) poe — update PoE firmware only on devices that supports it;
*) ppp — improved stability when receiving bogus response on modem channel;
*) qsfp — improved system stability when setting unsupported link rates;
*) rb922 — fixed miniPCI-e card detection (introduced in v6.49beta11);
*) routerboard — fixed «reformat-hold-button-max» validation for values below 10s;
*) sfp — added «sfp-rate-select» setting (CLI only);
*) sfp — fixed GPON module linking (introduced in v6.47);
*) sfp — improved 25Gbps optical module stability and linking;
*) sfp — improved SFP, SFP+, SFP28 and QSFP+ interface stability for CRS3xx and CCR2004 devices;
*) sfp — improved link stability for 10G, 25G and 40G modules on CRS309, CRS312, CRS326-24S+2Q+ CRS354 and CCR2004 devices;
*) sfp28 — changed FEC auto mode to disabled;
*) snmp — added «engine-id» OID support;
*) snmp — fixed «ipNetToMediaType» OID for incomplete entries;
*) ssh — fixed «undo» functionality;
*) supout — print detailed list of active user sessions;
*) switch — fixed (R/M)STP port blocking right before switching them in HW bridge (fixes possible packet loop when changing bridge settings);
*) switch — improved packet transmit between CPU and 98PX1012 for CCR2004-1G-12S+2XS device;
*) swos — fixed «static-ip-address» parameter;
*) tr069-client — added «X_MIKROTIK_LinkDowns» parameter for interface «link-downs» value reporting;
*) tr069-client — added support for Ethernet link speed reporting;
*) tr069-client — added support for interface comment reporting and editing;
*) tr069-client — added support for supout file upload;
*) tr069-client — fixed traceroute diagnostics time values;
*) tr069-client — improved XML with new-lines for readable output;
*) tr069-client — improved stability for download/upload diagnostics;
*) upgrade — fixed free space checking on flash type memories when installing new packages;
*) ups — added battery info for APC Back-UPS BX750MI;
*) w60g — general stability and performance improvements;
*) w60g — limit power output when using region EU to match EN302567 on nRAY;
*) w60g — use EU region by default;
*) webfig — added support for logo image from branding package;
*) webfig — do not show value units twice;
*) webfig — fixed «Wireless/CAP» menu opening;
*) webfig — fixed interface sorting by name;
*) webfig — show only «Close» button under «Wireless/Wireless Sniffer/Sniffed Packets» menu;
*) winbox — added «dhcp» option to «multicast-helper» setting;
*) winbox — added «interface-speed-100G» LED type to «System/LEDs» menu;
*) winbox — added «name» and «file-name» parameter when importing and exporting certificates;
*) winbox — added «sfp-shutdown-temperature» setting to SFP interfaces;
*) winbox — added SSH settings under «IP/SSH» menu;
*) winbox — added TFTP settings under «IP/TFTP/Settings» menu;
*) winbox — allow setting MCS (24-31) to 4×4 Wireless interfaces;
*) winbox — do not allow to add/remove W60G interfaces;
*) winbox — do not allow to set empty «init-string» field under «System/GPS» menu;
*) winbox — do not show «GPS antenna» selection for devices without selection support;
*) winbox — fixed «Secondary Frequency» parameter setting under «CAPsMAN/Channel» menu;
*) winbox — fixed DNS «cache-size» parameter setting;
*) winbox — fixed health reporting on RB960, hEX, hEX S and hAP ac3 devices;
*) winbox — fixed order of weekdays under «IP/Firewall» menu;
*) winbox — fixed support for «Delegated-IPv6-Prefix» for PPP services;
*) winbox — match «MAC Protocol-Num» predefined values under «Bridge/Filters» menu;
*) winbox — properly show «CRL Signature» field under «System/Certificate» menu;
*) winbox — separated CCQ Tx and Rx values in their own unique columns;
*) winbox — show «System/Health/Settings» only on boards that have configurable values;
*) winbox — show «current-channel» column by default for CAP interfaces;
*) winbox — show IPv6 address in separate field under «IP/Cloud» menu;
*) wireless — added U-NII-2 support for US and Canada country profiles for hAP ac lite;
*) wireless — added override for multicast-to-unicast translation of DHCP traffic;
*) wireless — do not remove channels >2462 MHz from «scanlist» if scanning for fixed channel;
*) wireless — do not send packet back to station-bridge it was received from;
*) wireless — fixed minor typo in debug logging messages;
*) wireless — improve WMM priority assignment for packets with internal priority greater than 7;
*) wireless — improve regulatory compliance with DFS requirements;
*) wireless — improve signaling of QCA9984 interface capabilities when using 160/80+80MHz channel width;
*) wireless — improved system stability on several 802.11ac devices (introduced in v6.49beta36);
*) wireless — log client signal strength on disconnect;
*) wireless — renamed «secondary-channel» to «secondary-frequency»;
*) wireless — updated «israel» regulatory domain information;
*) wireless — updated «united kingdom» regulatory domain information;

What’s new in 6.48.5 (2021-Sep-21 13:50):

Changes since 6.48.4:

*) branding — properly clean up old branding files before installing a new one;
*) crs3xx — fixed default MAC address calculation on management Ethernet for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) gps — improved interface monitoring;
*) health — improved temperature reporting;
*) ike2 — check if TS is still valid after obtaining SPI;
*) ipsec — improved SA update by SPI;
*) netinstall — require Netinstall version to be the same or newer as «factory-software»;
*) poe — update PoE firmware only on devices that supports it;
*) ppp — improved stability when receiving bogus response on modem channel;
*) qsfp — improved system stability when setting unsupported link rates;
*) sfp — added «sfp-rate-select» setting (CLI only);
*) sfp — improved SFP, SFP+, SFP28 and QSFP+ interface stability for CRS3xx and CCR2004 devices;
*) sfp28 — changed FEC auto mode to disabled;
*) w60g — limit power output when using region EU to match EN302567 on nRAY;
*) w60g — use EU region by default;
*) winbox — added «name» and «file-name» parameter when importing and exporting certificates;
*) winbox — allow setting MCS (24-31) to 4×4 Wireless interfaces;
*) winbox — do not allow to set empty «init-string» field under «System/GPS» menu;
*) winbox — do not show «GPS antenna» selection for devices without selection support;
*) winbox — show «System/Health/Settings» only on boards that have configurable values;
*) winbox — show «current-channel» column by default for CAP interfaces;
*) wireless — added U-NII-2 support for US and Canada country profiles for hAP ac lite;

What’s new in 7.1rc4 (2021-Sep-20 13:18):

*) improved filesystem and configuration storage stability;
*) show «expired password» prompt for users with blank password;
*) other fixes and improvements;

• NPK file — Default RouterOS version upgrade package, most important features included
• ZIP file — Contains all packages, including additional ones (User manager, etc.)
• ISO file — CD disk image, available only for x86 instruction set
• Netinstall — Utility for Installation from network

Click on changelog link to view changes in current and previous versions.

Click on MD5 link to view MD5 hashes of files.

Источник