Nvidia mac os catalina hackintosh info de

Grafikarten

Auf folgender Seite findest du Kompatible Grafikkarten für deinen Hackintosh

NVMe SSD

NVM Express (NVMe) ist eine auf SSDs optimierte Schnittstelle (Register-Level-Interface) für den PCIe Bus. Die Spezifikation an sich ist nicht auf SSDs limitiert, sondern allgemein auf non-volatile (persistente) Speicher ausgelegt. Das Protokoll wurde mit Augenmerk auf optimierte Kommando-Verwaltung (Submission und Completion) entwickelt. Aufgrund der hohen Geschwindigkeit von PCIe SSDs wurde außerdem darauf geachtet, dass möglichst viele Kommandos parallel abgearbeitet werden können. Wichtiger Hinweis: Die SSDs sind zwar über den PCIe Bus angebunden, als Protokoll wird aber NVMe eingesetzt.

NVMe Samsung SSD 980 PRO

Erreichen Sie ein hohes Power-Level: Entfesseln Sie die ganze Power der Samsung SSD 980 PRO – und bringen Sie die Leistung Ihres Rechners auf ein hohes Niveau. Dank der PCIe Schnittstelle der 4. Generation kann die 980 PRO die doppelte Datentransferrate im Vergleich zu NVMe SSDs mit PCIe 3.0 Schnittstelle erreichen.

Kompatible Hardware für deinen Hackintosh

Auflistung Kompatible Hardware für deinen Hackintosh

Источник

Download Install & Configure Nvidia Web Driver for Mac

Nvidia Mac driver is an additional macOS driver provided by Nvidia itself instead of Apple. Apple packs macOS with its own GPU Kexts, but when Nvidia web driver is installed, Apple’s native GPU Kexts becomes inactive.

Nvidia web-driver is required to make Maxwell, and latest Graphics cards work in macOS

Here are some nVidia GeForce Graphics cards which needs Webdriver to function properly in macOS

• GTX 750
• GTX 780
• GTX 950
• GTX 970
• GeForce GTX 980
• GTX 1070
• GTX 1080 GTX TITAN
• Titan X

You can download nVidia Web-driver from this page or Install with Automatic Nvidia web driver Installer.

How to enable Nvidia Web Driver

Clover Bootloader

• Mount EFI Partition / If you have installed legacy Clover look into /EFI folder for config.plist
• Open /Volumes/EFI/EFI/CLOVER/config.plist with text edit, Xcode, or Plist Editor Pro
• Edit Config.plist to resemble the changes below this works for Sierra 10.12.3 or above versions

However, for older system nvda_drv=1 is required still web driver installer inject nvda_drv=1 to NVRAM

Chameleon Bootloader

• Open /Extra/org.chameleon.Boot.plist with text edit, Xcode, or Plist Editor Pro.
• Edit Config.plist to resemble the changes below.

This is enough to get nVidia web-driver working in macOS.

Troubleshooting

Monitor goes to sleep at the end of the boot sequence when using iMac15,1 or iMac17,1 or MacPro 6,1 system definition

Fix: modify the AppleGraphicsDevicePolicy.kext as pointed out by PikeRAlpha here. We have two options, using Clover’s built-in kext patching (preferred) or manually editing the kext. Using Clover to patch the kext on the fly is preferred because it does not get overwritten after each OS X update. If you do it manually, you will have to make the edits after each update.

Method 1: The easy method

Install these two kext Lilu.kext and WhateverGreen.kext into your Library/Extensions folder.

NOTE: This method does not work with macOS Sierra 10.12, please use method 1 or 2 above.

Источник

Fix Old NVIDIA macOS Catalina

Fix Old NVIDIA macOS Catalina

par chris1111 Jeu 13 Juin — 10:51

Update 02 Dec 2020 Legacy Video Patch refait en Applications
Nouveau 2 Video ajouter
Support Graphics Intel HD 3000.
Support: GeForce 5xx, 4xx, 2xx, 8600M(GT)/8800M(GT), 9400M/9600M(GT), 320M/330M
* * NEW * * Support AMD/ATI Radeon HD 5xxx and 6xxx series

Update 18 Oct 2020 Legacy Video Patch
Fix isuue 10.15.6/10.15.7
Video ajouter Test GeForce 210 macOS Catalina 10.15.7

Update 03 Nov 2019
Ajout du Legacy Video Patch Package Creator
Ajout Video

Update 29 Aout 2019
Ajout du liens Github Old NVIDIA macOS Catalina-V-1-2-3-4-5-6-7 pour Catalina Beta
Retrait des enceints liens

Update 05 Juillet 2019
Ajout du Package Old NVIDIA macOS Catalina-V3 pour Catalina Beta-3

Update 18 Juin 2019
Ajout du Package Old NVIDIA macOS Catalina-V2 pour Catalina Beta-2

Fix Old NVIDIA Graphics For macOS Catalina-10.15
Support: GeForce 5xx, 4xx, 2xx, 8600M(GT)/8800M(GT), 9400M/9600M(GT), 320M/330M

Credit:
Fix/Patch: dosdude1 AsentientBot
Tester: chris1111
Packager: chris1111

Nouveau VIDEO 1 et 2

NOTE: la seule chose négative que je puisse dire à propos des cartes AMD / ATI est qu’en enregistrant un écran vidéo, le système devient lent et difficile à utiliser mais toujours utilisable. Avec la GeForce et la HD 3000 je n’ai pas ce genre de problème et pour ma part je pense que la HD 3000 est la plus fluide et la plus rapide des trois cartes graphiques

En conclusion, après avoir eu le temps de faire quelques tests, je conclus que les cartes AMD / ATI fonctionnent à près de 60% de leur pleine capacité donc le QE / CI complet n’est pas appliqué avec ce patch. Intel HD 3000 et Old GeForce fonctionnent très bien

Download ICI ➤ Fix Old NVIDIA macOS Catalina-(Legacy Video Patch

Video Test GeForce 210 macOS Catalina 10.15.7

Dernière édition par chris1111 le Ven 4 Déc — 19:39, édité 17 fois

_________________
Si notre forum t’a aidé. S’il te plaît, pense à faire un don pour nous soutenir financièrement. Merci !

Faite des Tutos d’installation après avoir réussi votre Hackintosh

Источник

High Sierra Nvidia WebDriver Loaded on Catalina Beta (No Acceleration)

rayrayronald

I have to say I am a complete noob so this is more likely a fluke.
I will try to include as many details as possible so the community can replicate.
I suspected this method would work on Mojave as well (not yet tried)

So I was installing mackintosh the first time today, started with High Sierra and the NVIDIA Drivers, huge success.

I wanna get Catalina since the apple apps aren’t backward compatible (e.g. notes, reminders), but I read about the lack of Catalina GTX 1080 support and I decided to use the iGPU until the driver comes.

I first edited the .config file, then set the MOBO to IGFX (with multiple monitor support). iGPU worked but there were glitches here and there so I did some finetuning.

Meanwhile I came across this post (problem 5) and changed it to my Mojave build number anyway.

The GTX1080 was still attached to the MOBO and I thought what if I connect one of the monitors to it? (I have two) AND IT WORKED.
System Report shows 2 GPU simultaneously (iGPU and dGPU). For some reason using launchpad will log me out, I suspect the cache limi on the iGPU so I plugged both monitors to the GTX1080 and it works perfectly (system preferences shows 3 monitors connected, which was weird)

I rebooted the device (both monitors on GTX) and as expected, it did not work, since MOBO was set to IGFX. Rebooting into BIOS and changing setting solved the problem.

Setup:
6700K
Asus Maximus Ranger VIII
GTX1080

Источник

How to Install macOS Catalina on PC: Step by Step Guide

macOS Catalina is Hackintoshable, yet it requires supported hardware and effort to be installed on a PC. Right now, the newest iteration of macOS is 10.15, known as Catalina. In this guide, we will show you how to install Catalina on your PC with the newly released Hackintosh Catalina Installer.

1 Advantage of Other Methods VS Hackintosh Catalina Installer

• You do not need a real Mac: All other Hackintoshing methods need to have an existing macOS installation for it to work. This usually means that you either have to find a real Mac, or set up a Mac VM. However, with Hackintosh Catalina Installer, you can just set up everything even from a Windows / Linux computer.
• The post-installation is easier: By default, Hackintosh Catalina Installer will automatically install necessary Hackintosh specific kexts and drivers for your computer when you boot your macOS installation for the first time. Other methods require you to do this manually, While the post-installation in Hackintosh Catalina Installer can cover up most Hackintoshes (you may have to use Install some kexts manually), it is still a nice convenience.
• Hackintosh Catalina Installer supports more hardware: Normally other Hackintoshing methods are specific for a Computer Build, but Hackintosh Catalina Installer can be installed on most computers without touching a single line of code.

2 Interested in Installing? Here are the Hackintosh Catalina requirements

• An existing computer with Windows, Linux, or Mac: This is the computer where you will download and set up Hackintosh Catalina. The computer can run either Windows, Linux, or macOS; any operating system will work.
• A Hackintosh-compatible computer with an empty hard drive: This is the computer where you will install Hackintosh Catalina. It can be the same computer as the one mentioned in the previous point. If your computer already has macOS installed, Hackintosh Catalina will just update macOS normally, without deleting any of your apps or files, but always a fresh installation is recommended. macOS needs its own hard drive partition – a minimum of 15 GB of space is required, but at least 50 GB of space is recommended. It is preferred that you use a completely empty hard drive for Installing Hackintosh Catalina.
• Download Hackintosh Catalina Installer: Catalina Installer is a distribution of macOS Catalina that has been made to work with PCs. You will need to use a BitTorrent client to download the disk image file containing Hackintosh Catalina, which is a little less than 6 GB in size. You must register on the website to be able to download anything.
• An empty USB drive (16 GB or larger): In this guide, you will write (port) Hackintosh Catalina onto a USB drive, and boot your computer from that drive to install Hackintosh Catalina. The USB drive must be at least 16 GB in size. Since you will need to erase all of the files on the USB drive, make sure to back up its contents first. You can reuse this USB drive for normal stuff after you finish installing Catalina.

3 Creating Hackintosh Catalina Bootable USB Installer from Mac.

Follow this step if you are setting up Hackintosh Installer on a Mac or existing Hackintosh. Plug your USB drive into Mac, and open Disk Utility (located in Applications->Utilities in your main hard drive). Select your USB drive in the sidebar of Disk Utility and erase the drive, with the “Format” set to “Mac OS Extended (Journaled)” format. You can rename the drive any way you want.

Select the main USB Device, “USB DISK 3.0 Media” as in the example above.

Erase USB as “Mac OS Extended (Journaled) format” & as “GUID Partition Map” Scheme.

Next, make sure that your Hackintosh Catalina disk image file is in the same folder as “Restore Catalina.pkg”. If “Restore Catalina.pkg” is still in a ZIP file, double-click that file to unzip it.

Double click on “Restore Catalina.pkg” to start the app. By default, the app will be aimed at your computer’s main hard drive (mine is named “Mac” in the picture above). You do not want this– instead, click through the installer until you reach the page with the “Change Install Location” button.

From here, change the install location of the app to your USB drive (mine is named “Catalina Installer” in the picture below).

Press the enter/return key. The app will ask for your system password. After you enter your password, it will begin writing the Hackintosh Catalina disk image onto the USB drive.

This will probably take 20-40 minutes, though it may take longer, depending on the speed of your USB drive & Computer. Once it finishes, your USB drive will contain a fully bootable version of the Hackintosh Catalina installer.

NOTE: “Restore Niresh Catalina.pkg” is very glitchy. If you can not find the “Change Install Location” button on the first time that you run the app, restart your computer, and re-run the app.

4 Creating Hackintosh Catalina Bootable USB Installer from Windows.

Follow this step if you are setting up Hackintosh Catalina on Windows. Plug your USB drive into your computer, and open TransMac. Find your USB drive on the left-hand column of the TransMac window.

Right-click on the USB drive, and click “Format Disk for Mac”. This will delete all of the files on your drive and prepare it for Hackintosh Catalina.

Once your USB drive is done formatting, right-click it again and click “Restore with Disk Image”.

A file selection window will pop up, Choose your Hackintosh Catalina disk image file (it will probably be called “Niresh-Catalina.dmg”), and proceed. Now, TransMac will write Hackintosh Catalina onto your USB drive.

This will probably take 20 to 40 minutes, though it may take longer, depending on the speed of your USB drive. Once TransMac finishes, your USB drive will contain a fully bootable version of the Hackintosh Catalina installer.

5 Creating Bootable Hackintosh Catalina USB Installer from Linux.

Preparing Catalina bootable USB from Linux is tricky, First, you have to uncompress dmg, then write it to USB.

Install DMG2IMG with YUM or APT-GET from Terminal

de-compress Catalina DMG with DMG2IMG.
Then restore the uncompressed image to USB.
Change the variables below as you need (Warning: The following is just an example do not copy and paste).

6 Set up the parts of your Personal Computer.

• Unplug all USB connected devices from your computer before you begin the setup (except your keyboard and mouse.). A faulty external USB hard drive can cause your Hackintosh boot loader to hang on startup.
• Open up your computer and unplug any extra internal hard drives that your computer has, besides the hard drive that you are installing macOS on. (Just unplug the hard drive SATA cables from your motherboard.)
• Remove any unnecessary PCI Cards and Hardware (You can plug them later.)

7 Set up your motherboard’s UEFI BIOS for Hackintosh Catalina.

Essentially, the BIOS (or UEFI) is the settings page for your computer’s motherboard. From here, you can fiddle with how your computer hardware works.
It is often necessary to change a few basic settings in the BIOS or UEFI to get macOS up and running. The BIOS standard is generally used by motherboards from before 2012, while the UEFI standard is used by motherboards made after that, Hackintosh Catalina Installer only supports UEFI Based BIOS.

• To access BIOS/UEFI Setup, press and hold the Delete button on a USB Keyboard while the system is booting up.
• Load Optimized Defaults.
• Set USB drive to the highest boot priority.
• If your CPU supports VT-d, disable it.
• Disable CFG-Lock.
• Disable Secure Boot Mode
• If your system has OS Type, set it to Other OS.
• Set OS Type to Other OS.
• Save and exit.

8 Boot into Hackintosh Catalina

Restart your Hackintosh, and plug in your Hackintosh Catalina USB drive. If things go well, your computer will boot from the USB drive instead of booting from your normal hard disk. You will then be able to view the Hackintosh Catalina clover bootloader menu.

If you do not manage to reach the Hackintosh Catalina menu, check your motherboard’s BIOS settings to make sure that the changes you made in Step 6 were properly applied. If they were, but you still cannot boot from the Hackintosh Catalina USB drive, unplug your USB drive, and go back to Step 3,4,5. Reformat your USB drive with Disk Utility and try again. If all else fails, try using a different USB drive for Hackintosh Catalina.

At the Hackintosh Catalina menu, press the enter key (or return key) to start the mac os Catalina installer. The installer screen will take several minutes to load.

In the worst-case scenarios, instead of loading the Mac OS installer, you may end up at a dark gray screen that tells you to restart your computer (a kernel panic), or you may end up with a small crossed-out sign (a loading error).

If you get a kernel panic/loading error (or if the Mac OS installer simply won’t start within 10 minutes), you’ll need to enter some boot flags. To enter boot flags, manually restart your computer by pressing your computer’s power button. Then, once you’ve booted back into the Hackintosh Catalina menu, try typing any necessary boot flags before pressing the enter/return key. Check out our list of common boot flags and our guide to fixing boot problems with verbose mode for reference.

9 Hackintosh Catalina Help & Support

When you have issues while installing Hackintosh Catalina, Please post in the forum for Support. Your question must Include the following details.

Example For Desktops:

• Processor model: Intel 6th Gen 6700K
• Motherboard model: Maximus Ranger VIII
• Graphics Card Model: Asus ROG STRIX 580 8GB
• If required Ethernet/Wifi model: T9E Archer

Example For Laptops:

10 Fix No Packages were eligible to Install

At the end of 2020, Catalina Installer will not work and may throw an error “macOS Catalina could not be installed on your computer – No packages were eligible for install” to fix this open Terminal (From Utilities Menu > Terminal) and run the following command.

11 Install Hackintosh Catalina

Once you’ve entered the Hackintosh Catalina installer, you will come up to a hard disk selection page. This is where you choose where you want to install Catalina.

If you’re installing Catalina on a computer that has never been turned into a Hackintosh before (i.e. doesn’t already have Mojave, High Sierra, Sierra, or El Capitan installed), there won’t be any hard disk options to select. We’ll have to fix that. To do this, start-up Disk Utility, which is located under the Utilities menu in the top bar.

You need to use Disk Utility to erase a hard drive partition so that Hackintosh Catalina can install itself on it. In the sidebar of Disk Utility, choose the hard drive partition where you want Catalina installed, and erase it by using the “Erase” tab. You can also just erase the entire hard drive. In the screenshot below, my two hard drive partition is called “Macintosh HD”, while my entire hard drive is called “Apple SSD macOS-0 SSD Media”.

When erasing, the format should be set to “APFS” & Scheme to “GUID Partition Scheme”. You can also partition the hard disk by using Disk Utility’s Partition tab.

On the installation page for macOS, the hard disk/disk partition should now be showing up. Select it, and then click the “Customize” button on the bottom left. This is where using a distribution becomes really useful: Catalina Installer allows you to install extra Hackintosh drivers and kexts, straight from the Hackintosh Catalina installer.

However, choosing the right options from this page can be really tricky, so unless you’re absolutely certain about which drivers and kexts you need to install for your computer, I don’t recommend installing too much stuff from here. The default selection will enable macOS to boot from the hard drive without any assistance, and automatically enable audio and ethernet. For most computers, that will be enough.

If your computer already has macOS installed and you are simply updating it to Catalina, you can just uncheck all of these options. macOS treats Catalina as just another update, there’s no need to reinstall all of your kexts and drivers.

Once you’re done with the “Customize” page, install Catalina. This will take at least 30 minutes.

Источник