Windows Subsystem for Linux Installation Guide for Windows 10

There are two options available for installing Windows Subsystem for Linux (WSL):

Simplified install (preview release): wsl —install

The wsl —install simplified install command requires that you join the Windows Insiders Program and install a preview build of Windows 10 (OS build 20262 or higher), but eliminates the need to follow the manual install steps. All you need to do is open a command window with administrator privileges and run wsl —install , after a restart you will be ready to use WSL.

Manual install: Follow the six steps listed below.

The manual install steps for WSL are listed below and can be used to install Linux on any version of Windows 10.

If you run into an issue during the install process, check the Troubleshooting installation section at the bottom of this page.

Simplified Installation for Windows Insiders

The installation process for Windows Subsystem for Linux has been significantly improved in the latest Windows Insiders preview builds of Windows 10, replacing the manual steps below with a single command.

In order to use the wsl —install simplified install command, you must:

• Join the Windows Insiders Program
• Install a preview build of Windows 10 (OS build 20262 or higher).
• Open a command line windows with Administrator privileges

Once those requirements are met, to install WSL:

• Enter this command in the command line you’ve opened in Admin mode: wsl.exe —install
• Restart your machine

The first time you launch a newly installed Linux distribution, a console window will open and you’ll be asked to wait for files to de-compress and be stored on your PC. All future launches should take less than a second.

CONGRATULATIONS! You’ve successfully installed and set up a Linux distribution that is completely integrated with your Windows operating system!

The —install command performs the following actions:

• Enables the optional WSL and Virtual Machine Platform components
• Downloads and installs the latest Linux kernel
• Sets WSL 2 as the default
• Downloads and installs a Linux distribution (reboot may be required)

By default, the installed Linux distribution will be Ubuntu. This can be changed using wsl —install -d . (Replacing with the name of your desired distribution.) Additional Linux distributions may be added to your machine after the initial install using the wsl —install -d command.

To see a list of available Linux distributions, enter wsl —list —online .

Manual Installation Steps

If you are not on a Windows Insiders build, the features required for WSL will need to be enabled manually following the steps below.

Step 1 — Enable the Windows Subsystem for Linux

You must first enable the «Windows Subsystem for Linux» optional feature before installing any Linux distributions on Windows.

Open PowerShell as Administrator and run:

We recommend now moving on to step #2, updating to WSL 2, but if you wish to only install WSL 1, you can now restart your machine and move on to Step 6 — Install your Linux distribution of choice. To update to WSL 2, wait to restart your machine and move on to the next step.

Step 2 — Check requirements for running WSL 2

To update to WSL 2, you must be running Windows 10.

• For x64 systems: Version 1903 or higher, with Build 18362 or higher.
• For ARM64 systems: Version 2004 or higher, with Build 19041 or higher.
• Builds lower than 18362 do not support WSL 2. Use the Windows Update Assistant to update your version of Windows.

To check your version and build number, select Windows logo key + R, type winver, select OK. Update to the latest Windows version in the Settings menu.

If you are running Windows 10 version 1903 or 1909, open «Settings» from your Windows menu, navigate to «Update & Security» and select «Check for Updates». Your Build number must be 18362.1049+ or 18363.1049+, with the minor build # over .1049. Read more: WSL 2 Support is coming to Windows 10 Versions 1903 and 1909. See the troubleshooting instructions.

Step 3 — Enable Virtual Machine feature

Before installing WSL 2, you must enable the Virtual Machine Platform optional feature. Your machine will require virtualization capabilities to use this feature.

Open PowerShell as Administrator and run:

Restart your machine to complete the WSL install and update to WSL 2.

Step 4 — Download the Linux kernel update package

Download the latest package:

If you’re using an ARM64 machine, please download the ARM64 package instead. If you’re not sure what kind of machine you have, open Command Prompt or PowerShell and enter: systeminfo | find «System Type» . Caveat: On non-English Windows versions, you might have to modify the search text, for example, in German it would be systeminfo | find «Systemtyp» .

Run the update package downloaded in the previous step. (Double-click to run — you will be prompted for elevated permissions, select ‘yes’ to approve this installation.)

Once the installation is complete, move on to the next step — setting WSL 2 as your default version when installing new Linux distributions. (Skip this step if you want your new Linux installs to be set to WSL 1).

Step 5 — Set WSL 2 as your default version

Open PowerShell and run this command to set WSL 2 as the default version when installing a new Linux distribution:

Step 6 — Install your Linux distribution of choice

Open the Microsoft Store and select your favorite Linux distribution.

The following links will open the Microsoft store page for each distribution:

From the distribution’s page, select «Get».

The first time you launch a newly installed Linux distribution, a console window will open and you’ll be asked to wait for a minute or two for files to de-compress and be stored on your PC. All future launches should take less than a second.

CONGRATULATIONS! You’ve successfully installed and set up a Linux distribution that is completely integrated with your Windows operating system!

Install Windows Terminal (optional)

Windows Terminal enables multiple tabs (quickly switch between multiple Linux command lines, Windows Command Prompt, PowerShell, Azure CLI, etc), create custom key bindings (shortcut keys for opening or closing tabs, copy+paste, etc.), use the search feature, and custom themes (color schemes, font styles and sizes, background image/blur/transparency). Learn more.

Set your distribution version to WSL 1 or WSL 2

You can check the WSL version assigned to each of the Linux distributions you have installed by opening the PowerShell command line and entering the command (only available in Windows Build 18362 or higher): wsl -l -v

To set a distribution to be backed by either version of WSL please run:

Make sure to replace with the actual name of your distribution and with the number ‘1’ or ‘2’. You can change back to WSL 1 at anytime by running the same command as above but replacing the ‘2’ with a ‘1’.

The update from WSL 1 to WSL 2 may take several minutes to complete depending on the size of your targeted distribution. If you are running an older (legacy) installation of WSL 1 from Windows 10 Anniversary Update or Creators Update, you may encounter an update error. Follow these instructions to uninstall and remove any legacy distributions.

If wsl —set-default-version results as an invalid command, enter wsl —help . If the —set-default-version is not listed, it means that your OS doesn’t support it and you need to update to version 1903, Build 18362 or higher. If you are on Build 19041 for ARM64, this command may fail when using PowerShell in which case you can use a Command Prompt instead to issue the wsl.exe command.

If you see this message after running the command: WSL 2 requires an update to its kernel component. For information please visit https://aka.ms/wsl2kernel . You still need to install the MSI Linux kernel update package.

Additionally, if you want to make WSL 2 your default architecture you can do so with this command:

This will set the version of any new distribution installed to WSL 2.

Troubleshooting installation

Below are related errors and suggested fixes. Refer to the WSL troubleshooting page for other common errors and their solutions.

Installation failed with error 0x80070003

• The Windows Subsystem for Linux only runs on your system drive (usually this is your C: drive). Make sure that distributions are stored on your system drive:
• Open Settings -> **System —>Storage ->More Storage Settings: Change where new content is saved

WslRegisterDistribution failed with error 0x8007019e

• The Windows Subsystem for Linux optional component is not enabled:
• Open Control Panel ->Programs and Features ->Turn Windows Feature on or off -> Check Windows Subsystem for Linux or using the PowerShell cmdlet mentioned at the beginning of this article.

Installation failed with error 0x80070003 or error 0x80370102

• Please make sure that virtualization is enabled inside of your computer’s BIOS. The instructions on how to do this will vary from computer to computer, and will most likely be under CPU related options.
• WSL2 requires that your CPU supports the Second Level Address Translation (SLAT) feature, which was introduced in Intel Nehalem processors (Intel Core 1st Generation) and AMD Opteron. Older CPUs (such as the Intel Core 2 Duo) will not be able to run WSL2, even if the Virtual Machine Platform is successfully installed.

Error when trying to upgrade: Invalid command line option: wsl —set-version Ubuntu 2

• Enure that you have the Windows Subsystem for Linux enabled, and that you’re using Windows Build version 18362 or higher. To enable WSL run this command in a PowerShell prompt with admin privileges: Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux .

The requested operation could not be completed due to a virtual disk system limitation. Virtual hard disk files must be uncompressed and unencrypted and must not be sparse.

• Deselect “Compress contents” (as well as “Encrypt contents” if that’s checked) by opening the profile folder for your Linux distribution. It should be located in a folder on your Windows file system, something like: USERPROFILE%\AppData\Local\Packages\CanonicalGroupLimited.
• In this Linux distro profile, there should be a LocalState folder. Right-click this folder to display a menu of options. Select Properties > Advanced and then ensure that the “Compress contents to save disk space” and “Encrypt contents to secure data” checkboxes are unselected (not checked). If you are asked whether to apply this to just to the current folder or to all subfolders and files, select “just this folder” because you are only clearing the compress flag. After this, the wsl —set-version command should work.

In my case, the LocalState folder for my Ubuntu 18.04 distribution was located at C:\Users \AppData\Local\Packages\CanonicalGroupLimited.Ubuntu18.04onWindows_79rhkp1fndgsc

Check WSL Docs GitHub thread #4103 where this issue is being tracked for updated information.

The term ‘wsl’ is not recognized as the name of a cmdlet, function, script file, or operable program.

• Ensure that the Windows Subsystem for Linux Optional Component is installed. Additionally, if you are using an ARM64 device and running this command from PowerShell, you will receive this error. Instead run wsl.exe from PowerShell Core, or Command Prompt.

Error: This update only applies to machines with the Windows Subsystem for Linux.

• To install the Linux kernel update MSI package, WSL is required and should be enabled first. If it fails, it you will see the message: This update only applies to machines with the Windows Subsystem for Linux .
• There are three possible reason you see this message:

You are still in old version of Windows which doesn’t support WSL 2. See step #2 for version requirements and links to update.

WSL is not enabled. You will need to return to step #1 and ensure that the optional WSL feature is enabled on your machine.

After you enabled WSL, a reboot is required for it to take effect, reboot your machine and try again.

Error: WSL 2 requires an update to its kernel component. For information please visit https://aka.ms/wsl2kernel .

• If the Linux kernel package is missing in the %SystemRoot%\system32\lxss\tools folder, you will encounter this error. Resolve it by installing the Linux kernel update MSI package in step #4 of these installation instructions. You may need to uninstall the MSI from ‘Add or Remove Programs’, and install it again.

—>

How To Run Windows Applications On Linux [Beginners Guide]

Last updated September 12, 2019 By Munif Tanjim 41 Comments



As you’re here, I’m going to assume that you’re a Linux user. And every once in a while, you find yourself asking: can I run windows applications on Linux?.

Answer to that question is yes. Yes, you can run Windows applications in Linux. Here are some of the ways for running Windows programs with Linux :

Both of them works just fine. But they are somewhat resource hungry.

If you only need to use a small Windows application, installing Windows on a separate HDD partition or as a Virtual Machine is not efficient. Moreover, Virtual Machine can’t utilize the total power of your machine. So, what is the solution?

No worries, there is another way to use Windows software on Linux. It’s called Wine. If you aren’t yet familiar with it or you are a beginner in the world of Linux, this article is for you.

In this beginner’s guide, I’ll show you what is Wine and how to use it to run Windows software on Linux. I have used Ubuntu here as Ubuntu is one of the best Linux distros for beginners, but any other Linux distribution will have more or less same steps (except for the commands in Arch or Fedora based distros).

Using Wine to run Windows programs in Linux

Wine stands for Wine Is Not an Emulator. And WINE is actually an acronym for that. And as previously stated, it’s not even a virtual machine.

Rather it is a compatibility layer for running Windows applications on UNIX-like or POSIX-compliant operating systems (e.g. Linux, Mac, BSD). While a virtual machine or emulator simulates internal Windows logic, Wine translates those Windows logic to native UNIX/POSIX-complaint logic.

In simple and non-technical words, Wine converts internal Windows commands to commands your Linux system can natively understand.

Installing Wine

There are various ways to install Wine on your system. As this is a beginners’ guide, I’ll describe the most straightforward one here.

Almost all the Linux distros come with Wine in their package repository. Most of the time the latest stable version of Wine is available via package repository. Installing Wine on Ubuntu is as easy as firing up a terminal and running these commands:

However, if you are using an 64bit installation of Ubuntu, you will need to run these additional commands:

This will add 32bit architecture support on your distro which will benefit you in installing specific software. If you don’t know whether you have a 32bit installation or 64bit, check this article: 32bit or 64bit Ubuntu?

What Windows applications are Supported by Wine?

There is a large number of Windows applications that are currently fully supported by Wine. They will run without any hassle.

However, new Windows applications are being developed every day. Many of them wouldn’t function as we want on Wine. But the development pace of Wine is also rapid, support for new applications is being added all the time.

And there is a dedicated database for keeping track of just that.

Wine Application Database has almost 24,000 applications rated with different status depending upon how well that applications run in Wine. If you want to quickly check the rating of the application you want to use in Wine, you can take a look there. Here are the meaning of those ratings:

• Platinum: These applications install and run flawlessly in out-of-the-box Wine.
• Gold: These applications work flawlessly with some special configuration.
• Silver: Applications with minor issues are tagged as Silver.
• Bronze: The Bronze ones have major issues that seriously affect usage.
• Garbage: These simply won’t run on Wine.

Reviews, Installation Procedure, which Wine version it was tested against and various useful data are also available for each application here.

Of course, Wine Application Database is mostly user-generated data, so you are always welcome to try running an application with a different version of Wine and share your result with rest of the community.

Finding an Application in Wine Application Database

Let’s see how we can find an application in Wine Application Database.

Go to Wine Application Database. Click Browse Apps from the left sidebar.

Write the name of the application you want to find in the Name field.

Click on the link to the application from the search result.

You’ll see a description of the application. There will be a list of various versions with their compatibility rating with a specific Wine version.

Let’s click on the latest version link.

This is the main page you need to check. There will be detailed information about that specific version.

You’ll get an idea of what will work and what will not. Also, the installation procedure will be included here if any additional tasks are needed for installation.

Getting Started with Wine

Before we go on installing and running applications in Wine, we should have clear idea about a few things and about how to configure Wine for usage:

WinePrefix

Windows applications need a C: drive. Wine uses a virtual C: drive for this purpose. The directory of this virtual C: drive is called wineprefix. First of all, we need to create a wineprefix. For doing that, fire up a terminal and enter this command:

This will create a wineprefix and open the configuration window for Wine. You can change the configuration options if you want or let it be as is for time being and close it. Now, you can locate the virtual C: drive at

The general rule is to install each new application into a fresh wineprefix. We can create and maintain multiple wineprefix manually. But that task would seem rather tedious for the beginners. So, we will skip that part for now. But, later I’m going to show the way for doing that part with ease.

Installing an Application with Wine

Installing a supported application in Wine is generally as easy as double-clicking on the installation file. However, we are now going to see a step-by-step guide for installing 7-zip on Wine.

First of all, check for 7-zip rating on Wine Application Database. It has Platinum rating, so we are good to go. Open Wine configuration ( winecfg ) and set the Windows Version to Windows 7.

Right-click on the 7-zip installation file and select Open With Wine Windows Program Loader.

See that destination folder path? 7-zip installation has recognized the virtual C: drive from wineprefix.

Finish the installation and go to the installation directory [ $HOME/.wine/drive_c/Program Files/7-zip/ ] from the file browser.

Right-click on 7zFM.exe and go to Properties > Open With.

Select Wine Windows Program Loader and close the window. Double-click on 7zFM.exe.

And there you go! For creating a shortcut on your desktop, right click on the file.

Now move the Link to Desktop.

Now, you can run 7-zip just from your desktop. All you have to do is double-click on the icon.

If you want to access your files on Linux, they are generally located in Z: Drive.

You can use the 7-zip just as you would use it on Windows – for extracting and creating archives and such.

Let’s make things (a lot) Easier

You might have noticed that, at Wine Application Database, with every version of application review a specific Wine version is mentioned.

It is because of the rapid development rate of Wine. Though an application runs with the current version of Wine, it might not run with a future version, because of the changes made.

Also, I’ve mentioned about installing each application in its own fresh wineprefix. So that, an application has no chance of interfering with another. And doing all these manually, usually from the terminal, is time-consuming, tiresome and at times, confusing.

PlayOnLinux is here to rescue. It provides a nice interface for doing all these things easily. For installing PlayOnLinux on Ubuntu, simply run this command:

You can easily perform every task related to Wine with PlayOnLinux from a beautiful and intuitive graphical interface:

• Installing & Uninstalling applications.
• Creating, Updating & Removing wineprefixes.
• Maintain Wine of different architecture and versions.
• Run & Create shortcut for installed applications.
• And so on…

But still, you will need to check Wine Application Database for reviews, installation procedures and such.

Advantages of using Wine

When it comes to running Windows applications on Linux system, Wine provides many advantages over using emulators or virtual machines.

• Performance: Wine is immune to the performance loss that otherwise occurs while emulating.
• Native Experience: There is no need to open Wine before running a Windows application. Exactly how Wine works will be more clear from this quote from official site,

Wine can be thought of as a Windows emulator in much the same way that Windows Vista can be thought of as a Windows XP emulator: both allow you to run the same applications by translating system calls in much the same way. Setting Wine to mimic Windows XP is not much different from setting Vista to launch an application in XP compatibility mode.

Wine Derivatives

There are quite a number of projects for running Windows applications on other platforms, based on Wine:

• CrossOver: CrossOver is a developed by the company named CodeWeavers. It is directly based on Wine with a few tweaks and proprietary add-ons. In fact, CodeWeavers employs a large portion of Wine developers. Unlike the rapid releases of Wine, CrossOver releases are more stable. The one and major downside is that Crossover is not free.
• PlayOnLinux: PlayOnLinux is completely based on Wine. And provides easier route for installing and managing application with Wine. PlayOnLinux is free.
  It is also available for Mac as PlayOnMac.
• ReactOS: ReactOS is an entirely different open-source operating system for running Windows applications. It reuses a considerable amount of codes from Wine. However, this is a project under development for more than a decade and I won’t recommend it.

Additional Tips on using Wine

Winetricks

This is another important part of using Wine. Winetricks is a helper script to download and install various redistributable runtime libraries needed to run some applications in Wine. These may include replacements for components of Wine using closed source libraries. Winetricks comes with Wine installation on Ubuntu.

For starting winetricks, run this command:

There are many options for helping you with various tasks.

Installing an Application with Winetricks

If you Install an app from winetricks, it will be installed in a separate wineprefix. Let’s install VLC:

It will then begin to download the VLC installation files. And then guide you through the rest of the process. It’s pretty simple.

Install Windows DLL or components and others

You can select a wineprefix from winetricks and install various libraries and components required by the application you want to run and also perform other operations.

N.B.: If using winetricks seems complicated to you, it’s perfectly okay. I feel the same way too. I always use PlayOnLinux for this reason. PlayOnLinux can do everything you might need to do from winetricks.

For more information you can check Wine FAQ and Documentation.

I hope you find this complete beginner’s guide to using Wine in Linux helpful. Now you can run Windows programs in Linux without installing a virtual machine or dual booting.

Let us know if you have any questions or opinion in the comment section below.

Like what you read? Please share it with others.

Читайте также:  Центр обновления windows остановка службы