Windows 7 stuck on «Please Wait..» screen

If you have this problem please do the following (even if you have the hotfix installed, which I have not found to work well or consistently):

A: If you get the «Please Wait» screen and DO NOT have another Windows PC/Server:

1. Power off the PC hard (hold the button, pull the cord, etc.)
2. When you power on the PC it should present you with a Safe Mode screen, Select «Safe Mode with Networking»
3. Log into the PC
4. Go to the Admin Tools «Services» section
5. Locate the following services and disable them: Windows Error Reporting, Network Location Service, Network List service
6. Power down the PC gracefully (Start, Shutdown, etc.)
7. Restart the PC, wait a minute or two (no more)
8. You should be presented with a login screen.

B: If you have another Windows PC/Server (network connected)

1. PC must be on a DHCP connected LAN (needs to be network connected)
2. Find the PC IP address/name
3. Go to the other PC, open the Admin Tools «Services» section
4. Select «Connect to another computer» when right-clicking the «Services» icon in the left column
5. Locate and disable the following services: Windows Error Reporting, Network Location Service, Network List service
6. Power down the PC gracefully (Start, Shutdown, etc.) if you can, power switch if no other choice.
7. Restart the PC, wait a minute or two (no more)
8. You should be presented with a login screen.

Please wait message windows

Начните с выполнения команд:

Перезагрузите сервер, проверьте наличие проблемы

По результату: выложите вывод выполнения команд

Я не волшебник, я только учусь MCP, CCNA. Если Вам помог чей-либо ответ, пожалуйста, не забывайте нажать на кнопку «Пометить как ответ» или проголосовать за полезное сообщение. Мнения, высказанные здесь, являются отражением моих личных взглядов, а не позиции работодателя. Вся информация предоставляется как есть без каких-либо гарантий. Блог IT Инженера, Twitter, YouTube, GitHub, Instagram

Похожий случай (проверьте, по rdp можно ли зайти когда сервер «висит»):

И когда залогинитесь, сбросьте Windows Update:

Можно так или попробовать просто остановить службу Windows Update, прибить/переименовать папку C:\Windows\SoftwareDistribution и запустить службу обратно.

+ что выше написал Антон.

Как видно на скриншоте, это мне не помогло. Причем в логе DISM я вижу следующее:

Summary:
Operation: Detect and Repair
Operation result: 0x0
Last Successful Step: Entire operation completes.
Total Detected Corruption: 0
CBS Manifest Corruption: 0
CBS Metadata Corruption: 0
CSI Manifest Corruption: 0
CSI Metadata Corruption: 0
CSI Payload Corruption: 0
Total Repaired Corruption: 0
CBS Manifest Repaired: 0
CSI Manifest Repaired: 0
CSI Payload Repaired: 0
CSI Store Metadata refreshed: True

Total Operation Time: 858 seconds.

В то время, пока сервер «висит» я не могу подключаться по rdp.

Please wait message windows

Начните с выполнения команд:

Перезагрузите сервер, проверьте наличие проблемы

По результату: выложите вывод выполнения команд

Я не волшебник, я только учусь MCP, CCNA. Если Вам помог чей-либо ответ, пожалуйста, не забывайте нажать на кнопку «Пометить как ответ» или проголосовать за полезное сообщение. Мнения, высказанные здесь, являются отражением моих личных взглядов, а не позиции работодателя. Вся информация предоставляется как есть без каких-либо гарантий. Блог IT Инженера, Twitter, YouTube, GitHub, Instagram

Похожий случай (проверьте, по rdp можно ли зайти когда сервер «висит»):

И когда залогинитесь, сбросьте Windows Update:

Можно так или попробовать просто остановить службу Windows Update, прибить/переименовать папку C:\Windows\SoftwareDistribution и запустить службу обратно.

+ что выше написал Антон.

Как видно на скриншоте, это мне не помогло. Причем в логе DISM я вижу следующее:

Summary:
Operation: Detect and Repair
Operation result: 0x0
Last Successful Step: Entire operation completes.
Total Detected Corruption: 0
CBS Manifest Corruption: 0
CBS Metadata Corruption: 0
CSI Manifest Corruption: 0
CSI Metadata Corruption: 0
CSI Payload Corruption: 0
Total Repaired Corruption: 0
CBS Manifest Repaired: 0
CSI Manifest Repaired: 0
CSI Payload Repaired: 0
CSI Store Metadata refreshed: True

Total Operation Time: 858 seconds.

В то время, пока сервер «висит» я не могу подключаться по rdp.

www.makeuseof.com

Follow MUO

How to Fix «Please Wait While Windows Configures Microsoft Office» Message

Stuck with an error message that says Windows is configuring Microsoft Office? Here’s the fix.

Stuck with an error message that says Windows is configuring Microsoft Office? Here’s the fix.

Picture the scene: you’re coming down to the wire on a book report, or a work presentation, or an important spreadsheet — but when you go to open up the appropriate Microsoft Office program, you’re met with an error message that just won’t leave.

The dreaded «Please wait while Windows configures Microsoft Office» message can be a real drag, but fortunately there are fixes available.

The most frustrating part of this particular issue is that it’s so difficult to diagnose exactly what the problem is. However, one of these techniques should get you the answers that you’re looking for. Follow each process in the order that they’re listed here, and you’ll be closer to getting Microsoft Office back in action, so you can get on with the project at hand.

Repair Microsoft Office

If it seems that your installation of Microsoft Office has been corrupted or otherwise damaged, your first port of call should be the repair function. The process will check for common issues and could potentially fix the problem automatically, so it’s a great starting point.

Open the Control Panel and navigate to Programs > Programs and Features. Scroll through the list of software that’s installed on your computer and find your installation of Microsoft Office.

Right-click the entry and select Change. At this point, you’ll be asked whether you want to carry out a Quick Repair or an Online Repair. A Quick Repair will fix most issues, so try that before you move onto an Online Repair.

If the process doesn’t work, then you can move onto some of the more in-depth fixes below.

Activate the Windows Search Service

One common cause of the stuck configuration dialog is a situation where the 32-bit version of Microsoft Office is installed to a 64-bit version of Windows. If this is the case, the message presented to the user will reference 64-bit components.

Happily, the fix for this problem is relatively straightforward. To get started, close any instance of the Office program that you’re trying to open up and then head to the Control Panel. Navigate to Programs > Programs and Features and then click Turn Windows features on or off.

Find Windows Search in the list, and ensure that its box is checked. Then click OK — you may need to restart your system for the changes to take effect.

Start Office in Safe Mode

Sometimes the configuration message can hang as a result of third-party add-ins. By starting Microsoft Office in safe mode and circumventing these additional components, you can determine whether or not this is the case.

To activate safe mode, search for your desired Office program using the search bar, then hold CTRL as you click on it. The following message will appear:

Click Yes and see whether the program opens as normal. If it does, then you can disable the add-ins you have installed individually to find out which one is causing problems.

Disabling Add-ins

Head to File > Options and navigate to the Add-ins section. Make sure that the drop-down menu is set to COM Add-ins and then click the Go. button beside it.

Disable all your add-ins and restart the program to make sure that things run normally. Then, enable them one by one until you determine which one is to blame.

Fix Office With a Run Command

We can use the Run dialog to input commands that tweak the way that Windows programs are initialized. By doing so, we can work around whatever is causing the program to hang on the configuration message.

To open a Run dialog, press Windows key + R. Alternatively, you can just type «run» into the search bar.

First, try entering the following string into the field:

If this solution doesn’t work, then we might be able to use a switch to diagnose the problem.

Using Switches

Switches are instructions that change the way that a particular program behaves, that don’t require the user to open that piece of software. They can be particularly useful when we’re trying to diagnose a problem that’s preventing the program from starting up normally.

Here are some switches that you can enter into a Run dialog in order to sniff out problems with Microsoft Office:

• winword /r — Resets Word’s registry values to their defaults.
• winword /m — Prevents Word from loading macros.
• winword /a — Prevents Word from loading its add-ins.

If you’re not working with Word, you can replace winword with excel for Excel and powerpnt for PowerPoint. Alternatively, you could write out the location of each program’s .exe file on the drive.

Do you need help with Office on Linux instead of Windows? Take a look at our guide to installing and using Microsoft Office on Linux.

To make your videos advertiser-friendly, you need to abide by a set of guidelines. Here’s everything you need to know.

English writer currently based in the US. Find me on Twitter via @radjonze.

Subscribe To Our Newsletter

Join our newsletter for tech tips, reviews, free ebooks, and exclusive deals!

One More Step…!

Please confirm your email address in the email we just sent you.

Fix: Please wait while Windows configures Microsoft Office message

If every time you open any Microsoft Office application, you receive the following message: Please wait while Windows configures Microsoft Office and it configures itself every time when it is running, you might want to read this article.

Please wait while Windows configures Microsoft Office

To resolve this issue you can try the following troubleshooting steps:

2. If you have a previous version of Office installed, such as Office 2003 or Office 2007, follow these steps:

Click Start, click Run, type the following command, and then press Enter:

Check if the problem is resolved.

3. If this problem persists, try this:

Click Start, click Run, type the following command, and then press Enter:

See if the problem has been solved.

If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, you can try to disable them. Normally, you could do the following to disable the conflict add-ins in your Office program. To disable the add-ins, follow these steps:

• On the File menu, click Options, click Add-ins, click Go next to the Manage field that displays “Com-in Add”.
• Check if there are any add-ins, and then clear the checkbox to disable them.
• Close the Office program and restart it.
• Add one check back each time to the list of Add-Ins, restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.

However, if the problem still persists you can visit KB2528748, download Fix it 50780, and use it to fix the problem. If all fails, well, uninstalling Office completely and re-installing it, is the only option you may have.