Keeps getting a pop up «Driver Update detected following device has a missing or out of date driver».

Original Title: Driver update

My husband has a new laptop. He keeps getting a message popping up «Driver Update detected following device has a missing or out of date driver

Intel (R) Dynamic Platform and Thermal etc.

The message comes from Slimware Utilities Holdings inc.

My questions are : How do we know this is genuine and not a potential virus?

Should we download it?

Thanks for any advice.

Replies (3) 

Thank you for posting the query on Microsoft Community.

1. What is the make and model of the computer?
2. Did you make any changes prior to this issue?
3. Are you using any third party security software?

Windows will automatically install if any updates are released.

I suggest you to try the steps provided below and check if it helps.

Restart the computer a few times and check for Windows Updates.

In the Search box on the taskbar, enter Windows Update, select Windows Update. On the Windows Update page, select Check for updates.

Also, check if you find any Exclatiomation mark with a Yellow triangle in the Device Manager.

1. Press Windows Logo Key+X. Click on Device Manager.

2. Then find the driver that needs to be updated or faulty.

Try to run the Windows Defender.

Protect your PC:

Hope this helps in resolving the issue. If the issue persists, do get back to us. We will be happy to assist you.

9 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

Thanks for replying to my query

The laptop is an HP and 15-AC153SA

He bought it from Currys in January and has only installed Photoshop elements, BreezeBrowser etc. Currys have put on a KnowHow Cloud thing which he is not interested in and that kept popping up too!

We have also installed Norton as a shared subscription with mine.

The pop up started coming up pretty much from the start. I felt that all updates were probably being done by Microsoft so said that he shouldn’t click on anything. We’ve been busy, so he just Exits the pop up when it comes on everytime he turns on the laptop.

Thanks for your suggestions — we will go through them over the next day or so — and get back to you if we still have a problem

Держите свои PC сейф

Страницы

четверг, 20 ноября 2014 г.

удалять удалять Update Windows 8 Drivers pop-up ads — Удаление удалять Update Windows 8 Drivers pop-up ads

• Посещая коррумпированных или сомнительный сайт
• Нажатие неизвестных нежелательных или спам вложения электронной почты
• Социальная инженерия баннерная реклама
• Драйв скачивания новая техника, через который кибер преступники внедрить вредоносную программу в систему
• Через бесплатных или акций программ продовольственного загруженных из ненадежных источников

• Ухудшается производительность системы и сделать вашу систему просто тупой коробки.
• Наводнение угрозу PC с бесчисленными взлеты поп и объявлений.

• Подключите ПК к удаленному серверу, чтобы злоумышленники могут получить доступ к системе
• Изменяет системные настройки и параметры реестра
• Открывает заднюю дверь для другого вредоносного угрозы легко войти в систему.
• воровство идентичности
• Мониторы пользовательскую активность и крадет конфиденциальную информацию в системе.

• Откройте панель управления с помощью значка Пуск, перейдите на удаления / удаление программ, в которой указана каждого установленного приложения.
• Выберите удалять Update Windows 8 Drivers pop-up ads, если присутствует там и после этого вы должны нажать на удаления или кнопку удалить.

• Перейти в начало и введите «Выполнить», чтобы отобразить окно Выполнить,
• Пользователь необходимо ввести ‘Regedit’ в диалоговом окне запуска.
• После этого редактор файлов реестра получите дисплей, удалить все вредоносные и неправильные записи оттуда.

Set up WinAppDriver

This document shows you how to install and run Windows Application Driver on a Windows 10 machine before performing automation test for Windows application. You need to install and run WinAppDriver on the test machine where you has the Application Under Test. The test runner machine where you install Katalon Studio and store test scripts can be either the same as the test machine (local connection) or another one (remote connection).

Set up Windows Application Driver on a local Windows 10 machine

You can install WinAppDriver on a local Windows 10 machine in two ways:

• Refer to Installing and Running Windows Application Driver to install WinAppDriver. Open this folder C:\Program Files (x86)\Windows Application Driver , then double-click on WinAppDriver.exe file; or
• From the Katalon Studio toolbar, select Tools > Windows > Install WinAppDrivers. The Windows Application Driver Setup window will pop up. Follow the instructions to install the Windows Application Driver. Then run WinAppDriver.exe.

Enable Developer Mode on the test machine. Refer to the official guide from Microsoft for instructions.

Set up Windows Application Driver on a remote Windows 10 machine

On the test machine:

Open Task Manager > Select File > Create a new task.

Select Create this task with administrative privileges and enter cmd in the Open text box, then click the OK button.

Run cd to folder C:\Program Files (x86)\Windows Application Driver .

• IP_Adress is the public IP address of the test machine. Run ipconfig.exe to determine the IP address.
• Port is the public port of the remote machine. By default, it should be 4723.

Enable Developer Mode on the test machine. Refer to the official guide from Microsoft for instructions.

RemoteApp program pop-up window is hidden in Windows

This article describes an issue when a RemoteApp program window is hidden in Windows 8.1, Windows Server 2012 R2, Windows 8, Windows Server 2012, Windows 7, or Windows Server 2008 R2. This issue is resolved in hotfix 2964832 that is described in this article and has a prerequisite.

Symptoms

Assume that you publish some RemoteApp programs on a remote desktop server. When you open a RemoteApp program from a client computer, the pop-up window of the RemoteApp program opens on top of other program windows, and then the window is hidden immediately behind the other windows.
This issue occurs if the client computer is running Windows 8.1, Windows Server 2012 R2, Windows 8, Windows Server 2012, Windows 7, or Windows Server 2008 R2.

Resolution

To resolve this issue, install the hotfix that is described in this article.

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a «Hotfix download available» section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:

http://support.microsoft.com/contactus/?ws=supportNote The «Hotfix download available» form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must be running one of the following operating systems:

Windows 8.1 with update 2919355

Windows Server 2012 R2 with update 2919355

Windows Server 2012

Windows 7 Service Pack 1 (SP1) with update 2830477

Windows Server 2008 R2 SP1 with update 2830477

For more information about update 2919355, click the following article number to view the article in the Microsoft Knowledge Base:

2919355 Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2 Update April, 2014 For more information about how to obtain a Windows 7 or Windows Server 2008 R2 service pack, click the following article number to view the article in the Microsoft Knowledge Base:

976932 Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2 For more information about update 2830477, click the following article number to view the article in the Microsoft Knowledge Base:

2830477 Update for RemoteApp and Desktop Connections feature is available for Windows

Registry information

To apply this hotfix, you do not have to make any changes to the registry.

Restart requirement

You may have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.

Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2 file information notes

Important Windows 8.1 hotfixes and Windows Server 2012 R2 hotfixes are included in the same packages. However, only «Windows 8.1» is listed on the Hotfix Request page. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under «Windows 8.1» on the page. Always refer to the «Applies To» section in articles to determine the actual operating system that each hotfix applies to.

The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:

Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2

The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the «Additional file information» section. MUM, MANIFEST, and the associated security catalog (.cat) files, are very important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.

How to handle login pop up window using Selenium WebDriver?

How to handle the login pop up window using Selenium Webdriver? I have attached the sample screen here. How can I enter/input Username and Password to this login pop up/alert window?

Thanks & Regards,

15 Answers 15

Use the approach where you send username and password in URL Request:

So just to make it more clear. The username is username password is password and the rest is usual URL of your test web

Works for me without needing any tweaks.

Sample Java code:

This should works with windows server 2012 and IE.

This is very simple in WebDriver 3.0(As of now it is in Beta).

Hopefully this helps.

Solution: Windows active directory authentication using Thread and Robot

I used Java Thread and Robot with Selenium webdriver to automate windows active directory authentication process of our website. This logic worked fine in Firefox and Chrome but it didn’t work in IE. For some reason IE kills the webdriver when authentication window pops up whereas Chrome and Firefox prevents the web driver from getting killed. I didn’t try in other web browser such as Safari.