Propertree mac os download

# config.plist Setup

Now that we’ve got all our Kexts(.kext), SSDTs(.aml) and firmware drivers(.efi), your USB should start to look something like this:

• Note: Your USB will look different, everyone’s system will have different requirements.

# Creating your config.plist

First we’ll want to grab the sample.plist from the OpenCorePkg

(opens new window) , this will be located under the Docs folder:

Next lets move it onto our USB’s EFI partition(will be called BOOT on Windows) under EFI/OC/ , and rename it to config.plist:

# Adding your SSDTs, Kexts and Firmware Drivers

For the rest of this guide, you’re gonna need some form of plist editing. And for our guide, we’ll be using ProperTree and GenSMBIOS to help automate some of the tedious work:

Next, let’s open ProperTree and edit our config.plist:

• ProperTree.command
  • For macOS
  • Pro tip: there’s a buildapp.command utility in the Scripts folder that lets you turn ProperTree into a dedicated app in macOS
• ProperTree.bat
  • For Windows

Once ProperTree is running, open your config.plist by pressing Cmd/Ctrl + O and selecting the config.plist file on your USB.

After the config is opened, press Cmd/Ctrl + Shift + R and point it at your EFI/OC folder to perform a «Clean Snapshot»:

• This will remove all the entries from the config.plist and then adds all your SSDTs, Kexts and Firmware drivers to the config
• Cmd/Ctrl + R is another option that will add all your files as well but will leave entries disabled if they were set like that before, useful for when you’re troubleshooting but for us not needed right now

Once done, you’ll see your SSDTs, Kexts and firmware drivers populated in the config.plist:

• Note: If you get a pop up «Disable the following kexts with Duplicate CFBundleIdentifiers?», press «Yes». This is to ensure you don’t have duplicate kexts being injected, as some kexts may have some of the same plugins(ie. VoodooInput is in both VoodooPS2 and VoodooI2C’s plugin folder)

If you wish to clean up the file a bit, you can remove the #WARNING entries. Though they cause no issues staying there, so up to personal preference.

# Selecting your platform

Now comes the important part, selecting the configuration path. Each platform has their own unique quirks that you need to account for so knowing your hardware is super important. See below for what to follow:

# Intel Desktop

• Note: Intel’s NUC series are considered mobile hardware, for these situations we recommend following the Intel Laptop Section

Code Name	Series	Release
Yonah, Conroe and Penryn	E8XXX, Q9XXX, etc 1 (opens new window)	2006-2009 era
Lynnfield and Clarkdale	5XX-8XX	2010 era
Sandy Bridge	2XXX	2011 era
Ivy Bridge	3XXX	2012 era
Haswell	4XXX	2013-2014 era
Skylake	6XXX	2015-2016 era
Kaby Lake	7XXX	2017 era
Coffee Lake	8XXX-9XXX	2017-2019 era
Comet Lake	10XXX	2020 era

# Intel Laptop

Code Name	Series	Release
Clarksfield and Arrandale	3XX-9XX	2010 era
Sandy Bridge	2XXX	2011 era
Ivy Bridge	3XXX	2012 era
Haswell	4XXX	2013-2014 era
Broadwell	5XXX	2014-2015 era
Skylake	6XXX	2015-2016 era
Kaby Lake and Amber Lake	7XXX	2017 era
Coffee Lake and Whiskey Lake	8XXX	2017-2018 era
Coffee Lake Plus and Comet Lake	9XXX-10XXX	2019-2020 era
Ice Lake	10XXX	2019-2020 era

# Intel HEDT

This section includes both enthusiast and server based hardware.

Источник

Propertree mac os download

ProperTree is a cross-platform GUI plist editor written using Python (compatible with both 2.x and 3.x) and Tkinter.

• Cross-platform — should work anywhere python and tkinter do
• Document-based to support multiple windows
• Node drag and drop to reorder
• Copy and paste
• Find/Replace — allows searching keys or values
• Ordered — or unordered — dictionary support
• Full undo-redo stack
• Backported support for binary property lists and unicode in python 2
• Expanded integer casting to allow for hex integers (eg. 0xFFFF ) in xml tags
• Context-aware right-click menu that includes template info to OpenCore or Clover config.plist files
• OC (Clean) Snapshot to walk the contents of ACPI, Drivers, Kexts, and Tools for OpenCore config.plist files
• Value converter that supports Base64, Hex, Ascii, and Decimal

Downloading The Repo As A ZIP File

On any system you can choose the green Code button, followed by the Download ZIP button (or click here) to download the entire repo as a zip file (note, this does not allow you to update via git pull — any updates would require you to download the repo again in the same fashion).

Cloning The Repo Via Git

* On macOS, you can simply double-click the ProperTree.command after cloning to launch.

ProperTree opens a black window on macOS Monterey (12.x)

It appears the default tk implementation that ships with macOS Monterey doesn’t display correctly. A workaround is to download and install the intel build (not «universal») of python 3.9.7 from python.org (direct link here) which has a compatible tk bundled, then use the buildapp-select.command located in ProperTree’s Scripts directory to build an application bundle targeting the installed python’s path.

ProperTree cannot open or save plist files on macOS Monterey (12.x)

This appears to be an issue with the «universal» installers from python.org. The solution is to use the intel-only build. The latest of which is 3.9.7, direct linked here. After installing, use the buildapp-select.command located in ProperTree’s Scripts directory to build an application bundle targeting the installed python’s path.

How can I have ProperTree open when I double-click a .plist file?

On macOS you can run buildapp-select.command located in ProperTree’s Scripts directory to build an application bundle which can be associated with .plist files.

On Windows, you can run AssociatePlistFiles.bat located in ProperTree’s Scripts directory to associate .plist files with ProperTree.bat , and also to add an Open with ProperTree option to the contextual menu when right-clicking .plist files. This approach is location-dependent, and moving your copy of ProperTree will require you re-run AssociatePlistFiles.bat .

When I try to run ProperTree, I get [ModuleNotFoundError: No module name ‘tkinter’]

That is because the graphical interface library that ProperTree depends on isn’t present or cannot be detected, you need to install tkinter from your package manager.

To install it on Ubuntu (and Ubuntu-based distros), you can run sudo apt-get install python3-tk -y

ProperTree doesn’t run because it doesn’t have permissions, what gives?

This shouldn’t happen and it is recommended that you download only from the official ProperTree repository, but if you are confident about your source, then running chmod +x ProperTree.command should sort it out

I use an international keyboard layout on macOS and some keys crash ProperTree with NSRangeException’, reason: ‘-[__NSCFConstantString characterAtIndex:]: Range or index out of bounds

This is a bug in the Cocoa implementation of Tcl/Tk on macOS (discussed here). The latest python 2 installer from python.org ships with, and uses Tcl/Tk 8.6.8 which has this issue fixed. Given that the shebang in ProperTree.command leverages #!/usr/bin/env python — the first python 2 binary found should be used. buildapp-select.command from ProperTree’s Scripts directory can be used to hardcode a specific python install’s path into the .app bundle’s executable shebang.

ProperTree crashes on Big Sur (macOS 11)

As of macOS 11.2 (20D5029f), the system’s tk installation appears to be fixed, and works correctly. As such, it should not require an external python version to function.

This is due to the default python installs on macOS leveraging an older tk version — which lacks support for macOS 11. To solve this, you can download and install the latest python 3 version from https://www.python.org/downloads/mac-osx/ (note: Currently the «universal» 3.9.1 installer causes theme issues and should not be used) then leverage the buildapp-select.command from ProperTree’s Scripts directory to build a .app bundle that will leverage that python version.

If you already have python 3 installed via brew or another package manager — it is likely still linking to the system tk version, which will still have issues unless linked against a newer version.

Источник

ProperTree — Tool zum Erstellen von Snapshots für OpenCore Konfigurationen

Bei OpenCore muss fast jede Änderung in der Datei- bzw. Baumstruktur desOC Ordners der Config repräsentiert sein — OpenCore scant seine Unterordner im Gegensatz zu Clover jedoch nicht selbst. Und da kommt ProperTree ins Spiel. Nachhdem man die EFI Partition gemountet hat, kann man die Config Plist aus ProperTree heraus öffnen und die Config ähnlich wie mit Plist Edit Pro bearbeiten. Allerdings kann ProperTree noch mehr.

Wenn man ACPI Patches, Kexts oder Driver aus dem EFI Ordner löscht oder andere hinzufügt, kann man mit ProperTree über die Funktion «OC Snapshot» den OC Ordner nach geänderten Dateien scannen lassen, die dann automatisch der Config hinzugefügt werden. Über die Funktion «OC Clean Snapshots» werden alle Dateien neu eingelesen und Kexts auf «true» gesetzt. Für mich ein unverzichtbares Tool zur Pflege des OC Ordners. Dazu «File» >»OC (Clean) Snapsot» auswählen und im nächsten Fenster schauen, ob man sich im OC Ordner EFI Befindet, bestätiigen und dann wird die plist automatisch aktualisiert und neue Einträge aufgenommen, falls sich etwas an der Dateistruktur geändert hat. Danach noch speichern und alles ist «proper».

Installation: nachdem man ProperTree Master.zip herunterladen und entpackt hat, zum Ordner «Scripts» wechseln und «buildapp.command» ausführen (Doppelklick). Das compiliert dann die App, da ProperTree eigentlich ein Frontend-GUI für Python ist.

Wichtg: ProperTree mag es gar nicht, wenn man die Config mit Rechtsklick öffnet und stürzt dann gerne mal ab. Von daher am besten immer erst die App starten und über File > open oder mit CMD+O die Config öffnen.

Источник

iBarcoder Lite 4+

Dmitry Kozlov

• • 1,0 • 1 оценка

• • Бесплатно
  • Включает встроенные покупки

Снимки экрана

Описание

Генератор штрихкодов. Просто, удобно, профессионально.

Если Вы частный предприниматель или большая корпорация — наша программа поможет Вам создать любое количество штрихкодов и этикеток с уникальным авторским дизайном. Теперь нет надобности покупать готовые штрихкоды, используй iBarcoder для дизайна и печати этикеток со штрихкодом или стикерсов на вашем принтере.

Можно использовать iBarcoder как Datamatrix and QR Code генератор. Создавайте штрихкод графику для коммерческих упаковок, книг и пр.

Печатайте на струйных, лазерных, термических или специализированных принтерах из нашей программы. Все созданные штрихкоды на 100% сканируются всеми доступными на рынке сканерами.

Вот краткий список возможностей iBarcoder:
— Создание профессиональных этикеток со штрихкодами,
— Полноценное превью,
— Динамическое изменение параметров штрихкода,
— Вращение объектов,
— Печать на стандартных Avery форматах,
— Сохранение документа,
— Экспорт штрихкода в картинку высокого разрешения (до 4800 dpi) , или векторную графику,
—- PDF (вектор)
—- EPS (вектор)
—- BMP
—- TIFF
—- JPEG
—- PNG
—- GIF and more.
— Изменение установок Фонта и Цвета,
— Добавление текста, окантовки, картинки на этикетку и более.

Работа с последовательными данными:
Мощный инструмент по работе с последовательными данными позволяет создавать последовательные штрихкоды как с использованием счетчика, так и задавать в качестве источника данных файл или Excel документ

iBarcoder поддерживает такие форматы штрихкодов как:
— Postnet
— Japanpost
— FIM Codes (3 types)
— Horizontal bars
— UPC barcode
—- UPC A (2 or 5 цифровой)
—- UPC E (2 or 5 цифровой)
— EAN barcode
—- EAN 13 (2 or 5 цифровой)
—- EAN 8 (2 or 5 цифровой)
— ISBN barcode
—- ISBN-13
—- ISBN-10
—- ISBN 2 цифровой)
—- ISBN 5 цифровой)
— ISMN
— ISSN (2 or 5 цифровой)
— GS1-128
— Code 128
—- Code 128 A
—- Code 128 B
—- Code 128 C
— Codabar
— ITF14
— Code 39
— Code 11
— Code 93
— MSI
— Interleaved 2 of 5
— Datamatrix
— Intelligent Mail Barcode
— Pharmacode
— QR Code
— Databar
— Databar Stacked
— Databar Staked Omni
— Databar Limited
— PLANET

Источник