Драйвер для ROLAND QUAD CAPTURE-UA55

/
Windows 10		1.5.2	0.1 [MB]	Скачать
Windows 8.1 / 8 / 7 / Vista / XP		1.5.2	12 [MB]	Скачать
MAC OS X 10.9/10.8/10.7/10.6/10.5/10.4		1.5.2	7.2 [MB]	Скачать
MAC OS X 10.10/10.11		1.5.2	1.3 [MB]	Скачать

Перед загрузкой прочтите и примите Лицензию Roland .

Драйверы для ROLAND QUAD CAPTURE-UA55 под Windows 10 / 8.1 / 8 / 7 / Vista / XP и MAC OS X 10.11/10.10/10.9/10.8/10.7/10.6/10.5/10.4.

Для Windows 8.1/8/7/Vista/XP и для MAC OS X 10.10/10.11 желательно удалить старую версию драйвера перед установкой нового.

Для Windows 10 драйвер должен автоматом загрузиться через Центр Обновления при подключении устройства. Если этого не произошло — смотрите эту статью.

Roland QUAD-CAPTURE подключается к порту USB с поддержкой стандарта 2.0. Если у вас порт USB 3.0 без поддержки стандарта 2.0 — устройство не будет работать.

Производитель рекомендует использовать QUAD-CAPTURE с компьютерами укомплектованными чипсетами Intel.

Quad capture driver windows

This system program updates your QUAD-CAPTURE to the latest version 104.

QUAD-CAPTURE Driver Ver.1.5.2 for Windows 10

This contains information on the QUAD-CAPTURE driver compatible with Microsoft Windows 10.

QUAD-CAPTURE Driver Ver.1.5.2 for Windows 10

QUAD-CAPTURE USB Driver Ver. 1.5.2 for Windows 8/8.1/7/Vista/XP

IMPORTANT NOTICE: Uninstall the old driver before you install the new driver. For uninstall procedures, please refer to the Readme.htm file that is created when you extract the download of the driver.

WHEN USING WITH WINDOWS 8: When the Windows SmartScreen is displayed upon installing the driver, please perform the following procedure:
1. Click [ More info ]
2. Click [ Run anyway ]
* Skip Step 1 If your PC is not connected to the internet.

QUAD-CAPTURE USB Driver Ver. 1.5.2 for Mac OS X 10.9/10.8/10.7/10.6/10.5/10.4

QUAD-CAPTURE Driver Ver.1.5.5 for macOS 10.15

QUAD-CAPTURE Driver Ver.1.5.4 for macOS 10.13 / 10.14

QUAD-CAPTURE Driver Ver.1.5.3 for macOS 10.12 / OS X 10.11

This is the QUAD-CAPTURE driver for macOS 10.12 / OS X 10.11.

QUAD-CAPTURE Driver Ver.1.5.2 for OS X 10.10

This is the QUAD-CAPTURE driver for OS X v10.10.

SMF Player for Windows

SMF Player for macOS

SMF Player for macOS / OS X

SMF Player for Mac OS X v10.7 / OS X v10.8 / OS X v10.9

About the UpdSMF

• UpdSMF is a simple SMF player that runs on Mac OS X v10.7 / OS X v10.8 / OS X v10.9.
  This SMF player is designed to be used only for updating, and cannot be used to play back conventional SMF music data.
• Before using this, you must first install a MIDI driver so that MIDI data can be transmitted.
  For the installation procedure, refer to the documentation for your driver or application.

SMF Player for Mac OS X v10.6 or earlier

This is an application for playing back Standard MIDI Files that can be used in place of a full-featured sequencer or librarian program. You will need a MIDI interface on your computer to use this program.

Quad capture driver windows

QUAD-CAPTURE Driver Ver.1.5.2 for Windows 10

Your computer automatically downloads the Windows(R) 10 driver from the Internet when a product requiring the driver is connected to the computer.
For detailed information about the driver, check «Download File» at the bottom of this page.

* Under normal conditions, the driver installation is completed in several minutes. It may take about 10 minutes depending on the Internet connectivity or if there are other drivers being installed for other devices.
* A problem may have occurred if the device is connected but cannot be used after waiting for 10 minutes. Download the detailed information for the driver and refer to «Troubleshooting.»

Windows-compatible PC equipped with USB port

* Intel chipset is recommended.
* The device may not perform to its full specs when used with an added USB 2.0 interface card.
* This product cannot be used with a USB 3.0 port that is not compatible with USB 2.0 specification.
* If this product does not work correctly when connected to a USB 3.0 port, you will need to connect it to a USB 2.0 port.
* Even if connected to a USB 3.0 port, the performance of the product will not change.

* This driver cannot be used in a virtual Windows environment, such as Hyper-V or Virtual PC.
* Mac computers running Microsoft Windows are not supported.

Quad capture driver windows

QUAD-CAPTURE Driver Ver.1.5.2 for Windows 10

Your computer automatically downloads the Windows(R) 10 driver from the Internet when a product requiring the driver is connected to the computer.
For detailed information about the driver, check «Download File» at the bottom of this page.

* Under normal conditions, the driver installation is completed in several minutes. It may take about 10 minutes depending on the Internet connectivity or if there are other drivers being installed for other devices.
* A problem may have occurred if the device is connected but cannot be used after waiting for 10 minutes. Download the detailed information for the driver and refer to «Troubleshooting.»

Windows-compatible PC equipped with USB port

* Intel chipset is recommended.
* The device may not perform to its full specs when used with an added USB 2.0 interface card.
* This product cannot be used with a USB 3.0 port that is not compatible with USB 2.0 specification.
* If this product does not work correctly when connected to a USB 3.0 port, you will need to connect it to a USB 2.0 port.
* Even if connected to a USB 3.0 port, the performance of the product will not change.

* This driver cannot be used in a virtual Windows environment, such as Hyper-V or Virtual PC.
* Mac computers running Microsoft Windows are not supported.

Download Roland QUAD-CAPTURE Drivers

You are running: unknown OS

Drivers found in our drivers database.

The release date of the drivers: 17 Apr 2021

See more information about Outbyte and unistall instrustions. Please review Outbyte EULA and app.privacy

Click “Download Now” to get the Drivers Update Tool that comes with the Roland QUAD-CAPTURE :componentName driver. The utility will automatically determine the right driver for your system as well as download and install the Roland QUAD-CAPTURE :componentName driver. Being an easy-to-use utility, The Drivers Update Tool is a great alternative to manual installation, which has been recognized by many computer experts and computer magazines. The tool contains only the latest versions of drivers provided by official manufacturers. It supports such operating systems as Windows 10, Windows 8 / 8.1, Windows 7 and Windows Vista (64/32 bit). To download and install the Roland QUAD-CAPTURE :componentName driver manually, select the right option from the list below.

Roland QUAD-CAPTURE Drivers

• Hardware Name: QUAD-CAPTURE
  Device type: Audio cards	Manufactures: Roland
  Driver Version: 1.05.02.0000	Release Date: 11 Oct 2013	File Size:
  System: Windows XP, Windows Vista, Windows Vista 64-bit, Windows 7, Windows 7 64-bit, Windows 8, Windows 8 64-bit, Windows 8.1, Windows 8.1 64-bit
  Hardware ID: USB\VID_0582&PID_012F

Was this page helpful?

What percentage of users, installed Roland drivers?

97% installed a driver

What percent of users has not helped this article?