Rebirth RB338 v2.01

Демо-записи

Пока не добавлено ни одной демки. Стань первым! Запиши маленький отрывок с использованием Rebirth RB338 v2.01, авторизуйся и загрузи mp3. Пусть на твою страничку обратят внимание другие посетители сайта.

Комментарии (0)

Чтобы оставить комментарий, авторизуйтесь.

Пополнения софта для Windows

Пространственный эффект, который объединяет 3 созданных на высшем уровне модуля интервалов: наиболее агрессивные модули продолжительности, мощности и эхо, подключенные параллельно,

Комплексный звуковой процессор, позволяющий получать довольно интересные комбинированные эффекты – комб-фильтр, транс-гейт, вокодер, вау-вау, различные виды модуляции

Бесплатный VST-плагин аналогового стереофонического многополосного корреляционного измерителя, основанный на измерителе корреляции, найденном в плагине фазовой синхронизации

Бесплатный плагин синтезатор.Если вы создаёте электронную музыку для грубых стилей, таких как Dubstep, Drum`n`Bass, Hardstyle, Rawstyle, Techno, Industrial и так далее, и

Audacity — это бесплатный звуковой редактор с открытым исходным кодом.Audacity можно использовать для: Записи звука. Оцифровки аналоговых записей (кассет, грампластинок).

Новости музыкального софта

Быстрое, удобное и гибкое программное обеспечение для создания музыки и исполнения. В нем есть всевозможные эффекты, инструменты, звуки и креативные.

Культовая антология инструментов, которая создавалась десятилетиями. V Collection 8, объединяющий культовые аналоговые синтезаторы, ретро-сэмплеры.

Synth One от компании AudioKit получил высокую оценку для iPad-версии не только из-за превосходного звучания. Этот бесплатный гибридный аналоговый/FM.

Digital Performer от MOTU всегда была одной из «традиционных» рабочих станций, которая работает в классическом стиле линейной аранжировки.

Instant Phaser компании Eventide открыл новое направление в далёком 1972 году. Eventide утверждают, что это был первый в истории электронный.

Новости музыкального оборудования

RANE представляет ONE — моторизированный DJ-контроллер непревзойдённого качества. RANE ONE — профессиональный моторизированный DJ-контроллер.

M-Audio представляет новые клавишные контроллеры серии Oxygen Pro с умным управлением и автоматическим мэппингом для безупречного и лёгкого.

RANE SEVENTY-TWO MKII — это двухканальный микшер с расширенными возможностями управления, который раскрывает всю творческую мощь программного.

Российский завод «Октава» заключил контракт на дистрибуцию микрофонов на территории Соединенного Королевства Великобритании и Северной.

TC Electronic уже давно находится списке лучших гитарных тюнеров в мире, но не собирается останавливаться на достигнутом. Фирма анонсировала.

KVR Audio

Pro Audio Forum — VST, AU, AAX Plugin and Audio Software Discussion

Rebirth 338 installing on windows 10? and other issues

Post by womble-dung » Thu Nov 03, 2016 11:35 pm

hi!
io have been desperately trying to get rebirth installed on windows 10.
has anyone had any luck?
even when i appear to have it installed, whenh i try to load it up, it begins to laod, then gets stuck at a notice about missing win help, which , in the form rebirth was made for, does not exist for win 10.

other issues are almost ALL of the official properlloerheadsd links to the official installers only takes you to a reason 9 promotion page!

can ANYONE PLEASE PLEASE PLEASE help?

all of the online advice appears irrelevant to me as it is all for win 7, 8, but not 10.

Post by MFXxx » Thu Nov 03, 2016 11:40 pm

womble-dung wrote: hi!
io have been desperately trying to get rebirth installed on windows 10.
has anyone had any luck?
even when i appear to have it installed, whenh i try to load it up, it begins to laod, then gets stuck at a notice about missing win help, which , in the form rebirth was made for, does not exist for win 10.

other issues are almost ALL of the official properlloerheadsd links to the official installers only takes you to a reason 9 promotion page!

can ANYONE PLEASE PLEASE PLEASE help?

all of the online advice appears irrelevant to me as it is all for win 7, 8, but not 10.

Dude your second post which is a duplicate of what you just posted in the original thread kindly answered by chk071 for you, who is a well seasoned veteran on the forums. Really work harder at it mate!

Fun with virtualization

Various virtulization fun, including games & productivity!

ReBirth RB-338 v.2.0

I’m not a big sequencer as I’m just terrible when it comes to music. But apparently on Wikipedia Propellerhead had set the download free, although download links now are inoperable.

After a lot of googling around I found it split up on one of those annoying download sites. So I spent the night waiting for stupid timers, training an AI to sport automobiles & intersections (lol redlight camera training), and as a reward I got the download.

ReBirth on Qemu under Windows 95

I installed it on the floppy version of Windows 95 on Qemu where it needed IE 5.01, Direct X, Winsock 2 & Windows 95 SP1 updates (among others…) and yes it works!

Included in the downloads is some assists so you can run it on Windows 10 x64 if you are so inclined.

Also there is some MacOS X images, although I haven’t tested them. I need to drag my G5 into my office to try it, but it’s getting late, and I want to go home.

I put the download up over on archive.org. You can download it here:

Update:

Since this time my upload to archive.org has been deleted. I was also trying to remove all the google accounts I have and when I changed the email address away from google all my uploads became ‘unknown’ so maybe they are hidden? Anyways over on Wikipeida just use citation #19, and you can download it there.

About neozeed

15 thoughts on “ ReBirth RB-338 v.2.0 ”

Careful, those aren’t Mac OS X images! ReBirth was never ported to OS X. I’ve never tried running it under Classic but it might work. Better to get a G4 or anything else that will boot directly into System 7.6MacOS 9.1.

IIRC it ran on PowerPC 601s but I have never personally run ReBirth on anything slower than a 180MHz 603e which had lots of horsepower to spare.

Which makes sense, as I didn’t see how a 1997 product supported an OS that came out in 2001. I have Classic running on my G5, so it ought to work. I hope.

P.S. My favourite ReBirth tunes:

Also this is the second time Propellerheads has released ReBirth for free. Back in 2005 they opened up The ReBirth Museum:
https://web.archive.org/web/20050924081030/http://rebirthmuseum.com/

Thanks I will check it out when I get home!

Huh. Funnily enough, the 64-bit patch is the one I made shortly after Propellerhead made Rebirth freely available. Never thought I’d see it floating around still – I barely tested the Re-Wire plugin using ACID Pro because I was still very much a noob when it came to using it. Actually, I still am 😉

Amazing to see it still surviving on the net – it was quickly chucked together in an hour or so; from what I recall, it was just a repacked installed and renaming a DLL to allow everything to play nicely. That and converting the WRI readme to an RTF.

Wow, thanks! 🙂 Minimal requirements:
NT4 or Win95

Installed on: bare 480MB ide vhdd as a virtualbox guest, sb16, nomidi, original NT4SP1 OEM installkit.

Before that I’ve performed only one unsuccessful attempt: latest nt3.51 vm from winworldpc, and after rb338 install at first start: “gfo nt4+/win95/98 or better” message appeared. What a f! 😛

Not just nostalgic mood, it is still usable nowadays. However, never ever tried on powerpc classic nor osxclassicenv. TBD

First sorry my bad enlish.
I just want to thank you.
Looked around and didn’t find where to download, till i saw your link 🙂

I still have this on a CD-ROM the one from when Propellerhead had the ‘Rebirth museum’ referred to above. Obviously doesn’t run on 64-bit, but I’ve had it on a Windows Vista machine for years.

Hello mate, do you still have this?

I grew up listening to songs from the Rebirth archive and I can’t find them again for love nor money.

So yeah apparently they deleted my upload. However the good news is that on wikipeida there is citation #19, which is a magnet link where you can download it.

It took me a few minutes, it’s still working as of 8/3/2021

I’m really sorry to bother you but I already have that on my list but it’s stuck on Downloading Metadata for some reason – I guess either there’s a technical issue at my end or I keep missing the seeders being switched on.

Would you be kind enough to make a new upload? I’ll seed after I can actually get the files

My apologies there seems to have been some confusion on my behalf here.

I’ve got Rebirth working on my 64-bit Windows installation already – what I’m actually looking for is the official archive of RBS songs.

I was able to locate an archive of 4000 tracks but it’s missing a lot of the tracks I remember from the original archive. If anyone reading has any idea where to find them, I’d be hugely grateful.

Unfortunately that one I couldn’t locate properly. I was hoping it’d show up on some shovelware CD.. It’s annoyingly hard to track down anything of the late 90’s, 00’s and beyond as it’s all too easy to get that era erradicated. Case in point UTZOO and how one bored sysadmin from the 80’s that posted little to nothing of interest has fought tooth and nail to get the archive scrubbed.

Such a shame, there are so many tunes I’d love to hear again.

On the search goes.. Thank you for your time.

If you do find anything be sure to update this!

Leave a Reply Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

How to use Reason with ReBirth RB-338 on 64-bit Windows 7 or 8

Probably because I’d been listening to some Acid Techno earlier in the week, I woke up this morning with the urge to play with a 303. So the obvious thing to do was to dig out ReBirth RB-338 and run it through Reason.

I was eventually able to get them working together on my computer (which runs Windows 7) but it took a few hours and its not easy, as the required information is all over the internet, not in one place. Next time I reinstall my computer I’ll probably have to go through this all over again so I’ve made some notes which hopefully will also be of assistance to others.

One important thing to note is that this procedure will not work with Reason version 8.2 or higher because Propellerheads have abandoned the 32-bit version of Reason. If you have Reason 8.2 then you will have to either side-install 8.1 (as 8.2 and 8.1 may be able to co-exist) or downgrade to 8.1 in order to use ReBirth. I haven’t tried it so I don’t know for sure, but I would expect that any songs created in 8.2 would not open in 8.1.

You may need to use bittorrent to download some files if the Rebirth Museum website is offline- I recommend an open source client like Deluge as some of the past favourites like uTorrent have really gone down the pan lately.

32-bit Reason

ReBirth is an old application from long before the 64-bit days. It seems that 64-bit Reason will only talk view ReWire to 64-bit applications, so if you have Reason 6 or later (which are 64-bit by default) then you will need to install the 32-bit version of Reason. Its possible to do this side-by-side with your existing 64-bit version, without uninstalling it. Reason 8.2 or higher only comes in a 64-bit version, so you cannot use any later version of Reason after 8.1 in conjunction with ReBirth.

To install 32-bit Reason you need to start the installer with the parameter «/32». You can do this by running cmd.exe or you can do this with a shortcut. I’ll show you how to do this with a shortcut.

Download the reason installer from the account section of the propellerhead website. (If you have the original CD then you can skip downloading and adjust these instructions appropriately). The installation files should be in a .zip file, you will need to extract these to a folder somewhere (right-click on the .zip file and select «Extract All. «).

Extract the .zip file containing reason

Browse to the folder that you extracted the images to, right-click on the .exe and select «Create Shortcut».

Create a shortcut to the installer

Edit the shortcut by right-clicking and selecting properties.

Edit the shortcut

In the target box, add the parameter » /32″ (without the quotes) to the very end of the line then select OK.

Add «/32» to the shortcut

If you launch the shortcut now, the installer will install the 32-bit version of Reason instead of the usual 64-bit version. Remember, Reason 8.2 and higher no longer support 32-bit installations so you must be using a version of Reason less than this. You can verify that everything has gone ok so far, as the installer window that comes up will offer to install «Reason (32)», instead of the usual «Reason».

32-bit Reason installer

Its possible to have both the 64-bit and 32-bit versions of reason installed simultaneously. Make sure that any shortcut you use to start Reason is starting the correct version — in Reason 6.5.3, both the 32-bit and 64-bit shortcuts in the start menu are given the name Reason, so its hard to distinguish between the two! You can check the shortcut you are using launches the correct version of Reason by verifying the installed directory — 32-bit Reason will install into a directory within «C:\Program Files (x86)\», while the 64-bit Reason will instal into «C:\Program Files\».

32-bit reason shortcut is on the left — notice the (x86)!

ReBirth RB-338

I’ve based this section on a 5 year old guide over at gearslutz, however some of the information is out of date.

Propellerhead have discontinued ReBirth (on computers at least — they have recently brought out an iPad App which you cannot use with Reason). However all is not lost, as they have released the original ReBirth as unsupported freeware. They have created an archive website called the ReBirth Museum where you can download ReBirth and get access to various mods that people have made for the programme over the last couple of decades.

Downloading ReBirth RB-338

Unfortunately, at the time of writing, the Rebirth Museum is down. Part of the website has been archived at The Wayback Machine however you need to register in order to download the ReBirth installer which means that archive.org can’t help us. So we’ll have to use bittorrent to download the necessary files. Maybe by the time you read this the ReBirth Museum will be back online, in which case you may be able to skip some of this section.

Firstly you need to retrieve an image of the rebirth cd. This is available via a bittorrent magnet link or you may be able to find it via google by searching for «rebirth_iso_installation.iso» or «rebirth_iso_installation.zip». However there are a vast number of questionable sites purporting to provide a .torrent but instead providing suspicious .exe files so I highly recommend using the magnet link to avoid all that nonsense. If noone is seeding the first torrent, I also found a second torrent. If you’re not sure which bittorrent client to use, I recommend an open source one like Deluge — some of the closed source clients are full of dodgy adverts.

Once you have the .iso file you may either burn it onto a CD or use some virtual cd drive software to mount it as a new drive letter. I recommend the second option as having to find and insert a CD to use a piece of software is rather inconvenient. I used Virtual CloneDrive which is freeware.

Insert the burnt CD, or mount the iso in CloneDrive as you will need this when you launch ReBirth. There is an installer on the CD however this doesn’t work with 64-bit windows so you will need an alternative. Some kind chap has made a 64-bit compatible installer which you can find at sendspace, or via bittorrent. The 64-bit installer will place ReBirth into a fixed location: for me it was «C:\ReBirth RB-338\». Once it has finished running you must navigate to this directory and perform a few actions before you run ReBirth.

Post-Installation

Firstly, you may need to rename ReBirth.dll_ to ReBirth.dll and ReWire.dll_ to ReWire.dll. If either or both of those dlls are already suffixed with .dll this is ok, you’ve saved a bit of effort.

Secondly you must acquire WinHlp32.exe. For Windows 7 try https://www.microsoft.com/en-us/download/details.aspx?id=91 and for Windows 8 try https://www.microsoft.com/en-us/download/details.aspx?id=35449. If you have no joy with those links, try searching Microsoft’s website for WinHlp32.exe. If you have problems installing the file, have a look at section 2.3 of the gearslutz guide for some troubleshooting tips.

Edit (11/12/2015): Commenter ron (who is clearly a pretty cool dude) provides the following tips to install WinHlp32.exe on Windows 10:

The final step to get ReBirth working with Reason is to configure ReWire. The installer didn’t do this for me automatically, so I had to Merge the ReWire.reg file which exists in the ReBirth folder. Until I merged this file, I would get an error when adding the ReBirth instrument to Reason: «ReBirth not found / Could not load ReBirth Engine / Make sure ReBirth is properly installed».

Merge the registry file to configure Rewire

At this point you should be able to launch ReBirth. Press play and you should be able to hear the default tune.

If that worked OK then you should be able to launch the 32-bit version of Reason and add a ReBirth Input Machine.

ReBirth Input Machine lives under Utilities

If its working correctly both green lights will be on, so wire up the instrument into the Mixer and pressing play in Reason. You should hear ReBirth’s default tune playing again, but this time via Reason!

Both green lights will be on if its working correctly.