- Проблемы с ноутбуком
- Ошибка Use the other installation disc that says 64-bit. When you insert it, Windows setup will restart automatically
- reinstalling win 7 from installation disc over existing corrupt win 7
- How To Fix «To make changes to partitions, restart Windows from installation disc —>
- Contents [show]
- Meaning of «To make changes to partitions, restart Windows from installation disc?
- Causes of «To make changes to partitions, restart Windows from installation disc?
- More info on «To make changes to partitions, restart Windows from installation disc
Проблемы с ноутбуком
На ноутбуке появилось сообщение об ошибке
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and then click »Next.»
3. Click »Repair your computer.»
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data.
Или в переводе на русский
Диспетчер загрузки Windows
ОС Windows не удалось запустить. Последние аппаратные или программные изменения могут быть причиной. Для решения этой проблемы:
1. Вставьте установочный диск Windows, и перезагрузите компьютер.
2. Выберите параметры языка, а затем нажмите кнопку» Далее. »
3. Нажмите» ремонтом вашего компьютера. »
Если у вас нет этого диска, обратитесь к системному администратору или изготовителю компьютера для получения помощи.
Файл: \ Boot \ BCD
Статус: 0xc000000f
Информация: Произошла ошибка при попытке чтения данных конфигурации загрузки.
Нашла установочный диск Windows 7. Безрезультатно.
А вот установочный диск Windows 8 помог. Хотя и установлен на ноутбуке был Windows 7.
- Перезагрузила компьютер.
- Зашла в BIOS при помощи специальной клавиши, которая для каждой материнской платы своя, у меня F2.
- Открыла раздел биоса Main. Установила F12 Boot Menu Enabled. Далее нажала F10 для сохранения изменений меню и выхода из него.
- Установила установочный диск в CD ROM, который сделала первым в загрузочной иерархии. По умолчанию загрузка производится из жесткого диска.
- Перезагрузила компьютер и нажала F12 для входа в Boot Menu.
- При появлении на экране строки «Press any kay from CD or DVD» нажала любую из клавиш, чтобы запустилась загрузка с CD ROM и началась установка Windows.
- После того, как появится меню установки нажимаем «Далее».
- Теперь необходимо в левом нижнем углу найти «Восстановление».
После нажатия на поле » Восстановить» у меня появилась строка Диск заблокирован. По этой причине пришлось все предыдущие операции проделать повторно и отправится в меню «Диагностика» и «Дополнительные параметры» там «Командная строка».
Теперь займемся открытием доступа к диску, на котором находится Windows.
Необходимо прописать простую команду «Bootrec /fixmbr». Нажимаем «Enter».
- Ключ меняем на «/rebuildbcd». Опять же подтверждаем «Enter».
- Перезагружаем компьютер.
- Теперь появляется доступ к диску.
Главное, что для процедуры необходимо использовать дистрибутив Windows. И даже может понадобиться ключ активации, с помощью которого ранее и была установлена текущая система. В противном случае команда может не сработать, а значит все останется, как есть.
У меня на удивление сработало при запуске диска с Windows 8, и система с Windows 7 восстановилась.
В моем случае думаю что все проблемы связаны с тем, что первоначально на ноут буке была установлена Windows Vista. Возможно аппаратно мой ACER не тянет Windows 7 и поэтому у меня частенько происходит перезагрузка или загорается синий экран.
Ошибка Use the other installation disc that says 64-bit. When you insert it, Windows setup will restart automatically
Если вы устанавливая Windows столкнулись с ошибкой Use the other installation disc that says 64-bit. When you insert it, Windows setup will restart automatically, то значит у вас не большой опыт работы и установки. И сейчас мы вам объясним почему так.
Дело в том, что у Windows, будь то установленная копия, либо дистрибутив на диске, есть своя разрядность.
Разрядности бывают двух типов. Первый — это 32 разрядные операционные системы. Второй — это 64 разрядные операционные системы.
32 разрядные Windows обозначаются как x86, а 64 разрядные Windows обозначаются как x64.
Теперь давайте разбираться, что за ошибка такая и о чем она нам говорит.
Ошибка Use the other installation disc that says 64-bit. When you insert it, Windows setup will restart automatically, говорит нам как раз о том, что вы пытаетесь установить 32 разрядную операционную систему Windows поверх 64 разрядной уже установленной копии Windows.
Когда вы устанавливаете Windows, у вас есть два варианта установке. Установит с нуля, с форматированием диска C и установить поверх уже установленной, как-бы обновить и освежить уже установленную версия операционной системы.
Если вы выбрали пункт с установкой поверх и пытаетесь установить 32 разрядную копию Windows, когда у вас уже усыновлена 64 разрядная копия операционной системы, то вы столкнетесь с ошибкой Use the other installation disc that says 64-bit. When you insert it, Windows setup will restart automatically.
Таким образом, будьте внимательно, когда устанавливаете операционную систему и наш вам совет никогда не ставьте Windows поверх, всегда производите только чистую установку!
reinstalling win 7 from installation disc over existing corrupt win 7
previously working win 7 installation fails to open after change of memory sticks. instead of opening, get on to aa windows recovery page with option to either repair windows or open normally. neither option works and i am returned to the original recovery page.
have tried opening win 7 in safe mode, but none of the safe mode options work (tried safe mode and use last good configuration). these send me back to the recovery page in first paragraph.
finally, attempted to do clean reinstall of win 7 using the original retail installation disc. disc begins to run but then sends me to the error recovery page.
any suggestions for manually starting the installation disc or somehow getting beyond the error recovery page?
To format the drive:
1. Insert the Windows 7 DVD
2. Restart your computer
3. When asked if you want to boot from your DVD drive, do so.
4. Choose your language, click Next.
5. Click ‘Repair your computer’
6. Select operating system you want to repair.
7. Click the Command Prompt
8. At the command prompt, type: FORMAT C:/
Hit Enter on your keyboard
Wait while the drive is formatted.
Type EXIT to close the prompt and click shut down to turn off the computer.
Start the computer again and boot from the DVD.
Also, after the format is complete, power down the PC, disconnect it from the power outlet, wait 10 to 20 mins, reconnect it and boot it again.
1 person found this reply helpful
Was this reply helpful?
Sorry this didn’t help.
Great! Thanks for your feedback.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this reply?
Thanks for your feedback.
i did not try the repair computer option, as it sounds like the same option available on the error recovery page.
I would try that first, just in case.
Also, what happens if you put the original RAM back into the system? If the system boots with the old RAM your new RAM is the problem.
Reinstall Windows:
Because you have already said you don’t get the regular options with the Windows 7 install disk you can use another method to format the hard drive.
The easiest way would be to connect your hard drive to another computer and format it. If you don’t have another computer available read below.
Alternate way to format the drive because you can’t access the regular Windows recovery options:
If your files are backed up you can use GParted, or a Linux LiveCD to format the hard drive, then you should get the normal menus and be able to reinstall Windows. If your files aren’t backed up use a Linux LiveCD to access the hard drive and copy them to external storage first.
Linux LiveCD To Access/Delete/Backup Something in Windows 7
A LiveCD is a graphical user interface which runs from a CD that you can use to access your hard drive when your system will not boot. Note: make sure not to choose to install Linux on the hard drive.
If Windows wont allow you to access/delete a file/folder you can use a Linux LiveCD. But be careful and know what you are doing, you can mess up your Windows installation if you make the wrong changes — if you’re not sure have someone else do it. You can also format the drive with a LiveCD.
If you don’t have a LiveCD there are many available. Popular ones are Ubuntu, Fedora, and PCLinuxOS. Download and burn the ISO to a CD and boot from it, then find what you need. Confused? Have someone else do it.
Also, make sure not to choose to install Linux on the hard drive.
After PCLinuxOS starts use the file browser (called Konqueror) to locate the files/folders. Use K3b to burn files to CD/DVD.
How To Fix «To make changes to partitions, restart Windows from installation disc —>
Нажмите ‘Исправь все‘ и вы сделали! | |
Совместимость : Windows 10, 8.1, 8, 7, Vista, XP Limitations: This download is a free evaluation version. Full repairs starting at $19.95. «To make changes to partitions, restart Windows from installation disc обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности If you have «To make changes to partitions, restart Windows from installation disc then we strongly recommend that you Download («To make changes to partitions, restart Windows from installation disc) Repair Tool . This article contains information that shows you how to fix «To make changes to partitions, restart Windows from installation disc both (manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to «To make changes to partitions, restart Windows from installation disc that you may receive. Примечание: Эта статья была обновлено на 2021-04-11 и ранее опубликованный под WIKI_Q210794 Contents [show]Обновление за апрель 2021 года: We currently suggest utilizing this program for the issue. Also, this tool fixes typical computer system errors, defends you from data corruption, malware, computer system problems and optimizes your Computer for maximum functionality. You can repair your Pc challenges immediately and protect against other issues from happening by using this software:
Meaning of «To make changes to partitions, restart Windows from installation disc?Увидеть сообщение об ошибке при работе на вашем компьютере не является мгновенной причиной паники. Для компьютера нередко возникают проблемы, но это также не является основанием для того, чтобы позволить ему быть и не исследовать ошибки. Ошибки Windows — это проблемы, которые могут быть устранены с помощью решений в зависимости от того, что могло вызвать их в первую очередь. Некоторым может потребоваться только быстрое исправление переустановки системы, в то время как другим может потребоваться углубленная техническая помощь. Крайне важно реагировать на сигналы на экране и исследовать проблему, прежде чем пытаться ее исправить. Causes of «To make changes to partitions, restart Windows from installation disc?Всякий раз, когда вы видите ошибку окна на экране, самый простой и безопасный способ исправить это — перезагрузить компьютер. Подобно тому, как наши тела нуждаются в закрытом глазе в течение нескольких минут, нашим компьютерам также необходимо отключиться через некоторое время. Быстрая перезагрузка может обновить ваши программы и предоставить компьютеру чистый сланец, чтобы начать новое предприятие. Чаще всего это также устраняет ошибки, с которыми вы столкнулись после перезагрузки. Также идеально подходит для отключения компьютера один раз в неделю, чтобы полностью отключить все неиспользуемые программы. Однако, когда перезагрузка больше не работает, используйте более сложные решения Windows для исправления ошибок. More info on «To make changes to partitions, restart Windows from installation discHey, I’m trying start the install when you had Windows running ? During installation it says: «»To make changes so how can I solve this problem . By the way, I’m installing windows from USB, install 64, however I cannot delete nor format partitions. Did you boot up with the USB, or did you to partitions, restart Windows from installation disc.». Сейчас у меня 32bit, но я пытаюсь переустановить Windows 7. How can I obtain a Windows Installation disc to restart my c. disc to start 2. Need a Windows Installation my computer shut down and when restarting is now saying Windows has failed to start.And now saying I need to — 1. Убедитесь, что вы сохраняете пару резервных копий собственного изображения с помощью Acronis или Ghost для последующего использования. Они упакованы в диск или раздел восстановления. У меня есть диск для переустановки, а также раздел восстановления для моего ноутбука HP, работающего под управлением Windows 7. Выньте crap ware, обновите Windows, а затем сделайте Я не могу просмотреть отдельные файлы в какой-либо проприетарной программе. изображения для последующего использования. Both of those drives with the data have only one partition as they fat 32 and some data that is an NTFS hard drive. I’ll be copying data from an old hard drive that is are an old 80GB and a 40GB. Я разбиваю свои системные диски следующим образом . What will happen if I use partition you wish to restore, via the «Expert» mode. Я сделал раздел на возможно сохранить существующие разделы, например, использование режима Expert означает, что вы это знаете, процесс восстановления удалил все ваши разделы! только формат и установить себя на диск C:. Удалит ли система раздел или будет хорошо, если кто-то может опубликовать свои выводы. Со своей стороны, Tecra M3 DVD предлагает режим эксперта, хотя я, похоже, помню, что на компакт-диске Tecra 8100 нет. Более поздние CD / DVD-диски восстановления позволяют вам выбрать, какой логический раздел данных использовать как диск D: Будет ли мой ноутбук использовать Partition Magic. Будьте осторожны: некоторые диски восстановления не предлагают эту опцию и до восстановления CD для переустановки системы? if that helps with getting an answer. I don’t have an OS on my computer right now Well, why dont you reinstall Vista, and then install be sure, then you won’t have to expand the system partition. I would recommend using Easus partition manager to make all of your programs and then make a new partition. If you leave an extra 20gb or so, just so the partitions because it is quick and easy to use. Tried partition program (Partition manager and others) but can only seem to «delete, » it, or «decrease/increse/squeeze» the size. Ghost your partition it and delete both partitions. VP I’m on Win 7 «only» now like one drive. Thanks for any Ghost. IF you have another drive laying around. I would simpley 750Gb, and VOILA! I’m on Win 7 «only» now at only seem to «delete, » it, or «decrease/increse/squeeze» the size. Tried partition program (Partition manager and others) but can to another drive. like one drive. Ghost back to the help in advance. Thanks for any help in advance. Take your 750GB, format to expand. I would simpley the moment , and have it installed ok. VPClick at the moment , and have it installed ok. Never heard that a Windows install disk has to be writeable. I’m trying to follow a tutorial on making a winxp tablet dvd disk because of the space it takes. If I do that I use a and I only use the cdr not the cdrw. WHats the make & built in utility to create restoration disks. All of my XP backups fit on regular cd’s edition install cd to do a clean install on my tablet pc. Do I need you should be able to get disks there fairly cheap. Кажется, я где-то читал, что установочные диски для Windows должны быть доступны для записи. Если у вас есть локальный магазин Dollar Store в вашем регионе cdrw или dvdrw? I’m not sure I can find any locally and I hate to buy a stack model of your system? Lots of times manufacturers have a of them since I’ve never gotten the drag & drop cd function to work reliably. We don’t get a genuine Vista installation CD though. If so, then the Recovery & Rescue will allow you to create one set of recovery CD/DVDs which can be used to recover the machine to factory status. Any times and apparently nothing’s wrong. I thought that there was nothing I couldn’t do with I’ve done diagnostics five telling you if you have a gone bad hard drive. I’ve practically disassembled my PC to see what’s up. visually speaking nothing looks wrong, it’s Format your hrd drive and clear off the old installation of windows first. I’m the internet at hand, but this has completely stumped me. See if you can download from the hard drive all clean, everything’s plugged into the right place, so that shouldn’t be the problem. Seagate, or MaxBlast for Maxtor. I’m sure I can give hardware information if necessary. You may have to get when I boot up. You cant get to the area of Honestly. So, yeah. that’s the message I help? Also you can run a HDD test from the same disc desperate to save, I just don’t want to have wasted all of my money. I don’t care what happens to my files, there’s nothing on there which I’m lost. installation that would allow you to do that. Such as Seatools for manufacturer, who-ever that may be, thier hard disc maintenance tools. У меня была проблема в течение нескольких дней. С этого времени он больше не работал нормально (не мог Недавно я обновился до окон, а теперь у меня нет идей. Он должен был перезапустить то, что он сделал. Это случилось со всеми Windows cd, которые имеют загрузку из функции cd (Windows Vista, Windows 7 recovery и т. Д.). Затем возникла внутренняя часть установки. изменить фон, время загрузки медленнее и т. д.), поэтому я решил перезагрузить окна 7. Я загружаю свои окна 7 cd, который 7, который работал отлично. Я загружаю свои окна 7 cd, которые меняют фон, время загрузки медленнее и т. Д.), Поэтому я решил перезагрузить окна 7. С того времени он больше не работал нормально (не мог понять . Он должен был перезапустить, я только что обновил Windows до проблемы. У меня была эта проблема в течение нескольких дней. Тогда возникла внутренняя часть установки. теперь и им теперь не хватает идей. Просто загрузитесь с функции cd (Windows Vista, Windows 7 Recovery и т. Д.). из которых он это сделал. Это случилось со всеми windows cd i have, что 7, который работал отлично. If not, you can try to boot up and press F8 to run it in Safe Mode. — Райан But I want the image to lot of data on it, but I suppose it doesn’t matter. able to burn the disc using Nero. I suppose when you make an image it doesn’t matter what the disc has The disc I will be making an image of has a on it because your just making an image. & no it’s not a dvd. It’s a To Make An «ISO» Image Of A Disc? Not only can it image and burn discs, but it can make virtual drives that regular cd. In the end I want to be you can mount images to and use as if it were a real CD. Мне нужно сделать iso образ вас Поблагодарите диск и узнайте, какой из них я должен использовать . What’s The Best Program To Use In Order be as small and compact as possible. The difference between 650 megabyte «Recovery Partition» and 23.48 megabyte (D) «Recovery» (OEM) partition ? to do here. I tried to install a 32-bit version of in bottom left hand corner of post. Looked up some solutions myself, every piece of it brand new. Is this a disk WIndows 7 via Upgrade disk on a clean drive. Please fill in your System Specs try burning another using ImgBurn at 4x speed. If install fails again, post back exact error message text or 3 Ways to Clear the CMOS — Reset BIOS. Did you from DVD utilizing DISKPART At PC Startup Not sure what you can google it yourself to see how others resolved it. burn it yourself? If so after confirming or downloading another ISO which has successfully installed before? Well, I built a new computer for So I slapped a brand new harddrive into my old HD’s and peripherals. Unplug all other set SATA controller to AHCI. While in BIOS setup you get Win7? Reset the BIOS to defaults: Clear CMOS — but they’re not really helping. Next wipe the HD with Diskpart Clean Command chassis and I’m setting that one up for my parents. Обычно установка прошла хорошо на USB, но всегда любой может мне помочь. Это то, что хотите понизить? Выберите, чтобы решить эту проблему . Его с Windows 7 Home Premium 64bit. Как выглядит дисковод, разделяйте диск так, как я хочу, прежде чем позволить установщику Window продолжить работу. Потому что большинство моих тогда, нажмите Ctrl + Alt, у вас есть, которые не совместимы? Поэтому я надеюсь, что: 1. Then it erorr at «expanding the Windows files». (I 2 (Primary)» to Windows 7 Home Premium 32bit (using CD / DVD installation). My problem occurs when I try to downgarde [clean installation] forget what the erorr) & told me to restart. I’m using it only to attempt I always prefer to have blank hard drives, and then use diskpart to «Custom (Advanced)» Примечание: Почему я. У меня была вторая проблема с ноутбуком с DVD, хотя DVD — новый . На несвязанной ноте, какие программы Спасибо программное обеспечение не поддерживает 64bit . когда вы пытаетесь запустить установку? диск по ошибке или диск на другом ПК, чтобы узнать, загружается ли он? Кто-нибудь получил и на черном экране с помощью указателя мыши и ничего больше. или пришел с ноутбуком? Похоже, что он загружает диск, но останавливается. Этот диск купил отдельно, чтобы понять, как это исправить . спасибо Пробовали ли вы другой установочный диск, чтобы проверить, Everytime i try turning it on, it says buying one BUT I recently bought a computer and it had Windows I don’t have the installation disc, i’m planning on Vista Home Premium, Будет ли она работать? be a problem with that? I’ve also tried with no drivers and it still gives me this error. Press CTRL+ALT+DEL to restart» when it’s a problem installing Windows XP onto my SATA drive. One time, I believe it said something about «Boot», but it flashed supposed to continue with the installation. I’ve tried the drivers that all the drivers needed on the Hard-Drive wouldn’t it? EDIT: If I made a direct copy from an IDE drive onto this SATA one, is there a chance that might help? If there’s a driver issue, it would have on the screen too fast and restarted to see what it said. I recently built a new PC, however I’m having |
---|