Flash Update Tool. Updates HDSPe MADI card to firmware version 33, HDSPe PCI and HDSPe ExpressCard card to 20, RayDAT to 16, AES to 11, MADIface to 23, AIO to 14.
Flash Update Tool. Updates PCI and CardBus card to hardware revision 17/55, HDSP 9652 to 108, HDSP 9632 to 155, HDSP MADI to 207 and AES-32 to 234.
Attention: Users of HDSP PCI Rev.
HDSPe MADI FX, MADIface XT (E-PCIe)
WDM streaming driver. WDM, WDM-KS, ASIO. The driver does not support other audio interfaces!
Version 2.14, 02/27/2019
driver_pciefx_win_214.zip
Flash Update Tool. Updates HDSPe MADI FX firmware to v 91 and DSP v 26. MADIface XT firmware to USB 3/2 191, PCIe 56, DSP 42.
Fireface UFX+ (Thunderbolt)
WDM streaming driver. WDM, WDM-KS, ASIO. The driver does not support other audio interfaces!
Version 1.16, 06/27/2019
driver_tb_win_116.zip
Thunderbolt Flash Update Tool. Updates Fireface UFX+ firmware to USB 50, TB 102, DSP 42.
08/27/2018
fut_tb_win.zip
Driver for Mac OS X
Download in browser Firefox: Right click the driver file (*.gz) and choose «Save target as . «.
Driver for 10.9 or up. See readme.txt for important notes!
Version 4.13 07/01/2019
hdspe_x86_413.zip Help for High Sierra Installation PDF
Driver for 10.6 to 10.8, 32 bit/64 bit. See readme.txt for important notes!
Version 4.12 02/15/2019
hdspe_x86_412.zip
Mac OS X Intel driver for 10.4.8 to 10.5.x. Supports DIGICheck. See readme.txt for important notes!
Mac OS X Intel (10.4.8 or up) version of the PPC driver 1.6c for Hammerfall DSP System. Also supports HDSPe PCI Card and ExpressCard with Digiface, Multiface and RPM. See readme.txt for important notes!
Version 1.73 06/22/2008
hdsp_173_x86.gz
Mac OS X Intel Flash Update Tool for HDSPe System. Updates HDSPe MADI to firmware version 33, HDSPe PCI and HDSPe ExpressCard to 20, RayDAT to 16, AES to 11, MADIface to 23, AIO to 14.
Источник
Installation Guide
How to install the latest RME Audio driver for macOS BigSur and M1 Computer
Open Startup Security Utility
Boot the M1 computer in Recovery mode (turn it on with the power button pressed until the screen shows the startup options are loaded)
Select Options, then your language
In the top menu go to Utilities -> Startup Security Utility. Select the system where the RME drivers will be installed
Continue with -> Security Policy
Select Reduced Security -> Allow user management of kernel extensions from identified developers
Install the RME Audio driver
Download the correct “Big Sur” (OS 11) M1 driver for your RME device
Unpack the zip file
Double click the .pkg file and install the driver
Before the reboot for finishing the driver installation open System Preferences, Security & Privacy, tab General. There should be a grey „Allow“ button in the right lower area. Click the unlock symbol first, then confirm using the RME GmbH kernel extension.
Install the RME Audio driver
Download the correct “Big Sur” (OS 11) driver for your RME device
Unpack the zip file
Double click the .pkg file and install the driver
Before the reboot for finishing the driver installation open System Preferences, Security & Privacy, tab General. There should be a grey „Allow“ button in the right lower area. Click the unlock symbol first, then confirm using the RME GmbH kernel extension.
RME Interface is still not recognized after successful installation under macOS?
Please make sure that your device is connected and turned on. Start TotalMix and the Settings dialog from the Applications folder.
The RME applications will have to be authorized manually in System Preferences / ‘Security and Privacy’.No longer than 30 minutes after installing the RME driver, you will need to click the ‘Allow’ button in the lower right corner and restart your computer.
If the button does not immediately disappear, please manually start the RME driver settings Window and TotalMix FX and the press «Allow» again.
If the «Allow» button is NOT visible, you may need to reinstall the driver again to make it appear again.
For more information, please also take a look at the following RME forum post:
Источник
Rme babyface pro driver mac os
The Direct USB Recording converts the Fireface UFX Series & Fireface UCX II into a stand-alone field recorder and a powerful multichannel live player for previous recordings, e. g. for virtual sound checks.
RME Audio Interfaces ready for macOS 11 Big Sur
RME Audio takes software support seriously, and has compiled drivers for use with the new Mac OS operating system macOS 11 Big Sur with full support for Intel & M1 (ARM) Computer.
TotalMix FX Beginner’s Guide Tutorial Series
The DSP-based TotalMix mixer allows fully independent routing and mixing of input and playback channels to all physical outputs. Independent stereo submixes plus a comprehensive Control Room section offer unrivalled monitoring capabilities and unsurpassed routing flexibility.
Latest Driver Updates
US Customer? Visit RME USA for Special Offers and Promotions.
Social Media
Like, follow and share RME Audio to receive the latest Product Information or tag #RMEAudio and get featured.
You want to be kept updated?
Sign up for the monthly Newsletter. You will be informed about new Products, Software Updates as well as Special Offers.
Источник
Installation Guide
Download and install the latest driver for RME Audio Interfaces
Equal performance on Mac and PC
RME audio interfaces can be used with both Mac and PC’s without a hitch. If you’d like to use your device with a different computer (e.g. at a friend’s studio), all you need to do is install the driver on to the second computer and you’ll be good to go.
TotalMix FX is included as part of the driver. After you’ve downloaded, installed the latest driver and connected your interface, the mixer window will open automatically. You can also store your TotalMix FX settings to the firmware on your device for easy recall, or save and export your setup as a reloadable Workspace.
Driver Updates do not require to remove the existing drivers. Simply install the new driver over the existing one.
Driver Installation on Mac Computers
If you’re the proud new owner of an RME audio interface then congratulations – you’ve just added a powerful, professional and high quality interface to your studio or live setup! Many RME audio interfaces contain an installation CD in the box, however we always recommend visiting the Downloads section. The process of installation is logical the same for all RME products:
Unzip the downloaded file and start the driver installation by double- clicking the icon.
Now connect your computer and RME Audio Interface with the supplied cable. Mac OS X detects the new hardware as a new device.
During driver installation the programs Totalmix (TotalMix FX) and Fireface USB Settings are copied to the Applications folder. They will automatically start into the dock if a RME Audio Interface is connected. A reboot of the computer is not required.
Firmware Flash Update
The Flash Update Tool updates the product firmware to the latest version. It requires an already installed driver.
Start the program Fireface USB Flash. The Flash Update Tool displays the current revision of the firmware and whether it needs an update or not. If so, simply press the ‘Update’ button. A progress bar will indicate when the flash process is finished (Verify Ok).
After the update the unit needs to be reset. This is done by temporarily powering down the device. A reboot of the computer is not necessary.
When the update fails (status: failure), the unit’s second BIOS will be used from the next cold boot on (Secure BIOS Technology). Therefore the unit stays fully functional. The flash process should then be tried again on a different computer.
macOS — RME Interface is not recognized after successful installation? Starting with the 10.13.2 update for macOS High Sierra, a new security feature requires users to approve new applications that interact with the kernel, a core part of the operating system. Find out how to authorize your Interface manually in System Preferences / ‘Security and Privacy’. Help for High Sierra / Mojave Installation PDF.
Driver Installation on Windows
If you’re the proud new owner of an RME audio interface then congratulations – you’ve just added a powerful, professional and high quality interface to your studio or live setup! Many RME audio interfaces contain an installation CD in the box, however we always recommend visiting the Downloads section. The process of installation is logical the same for all RME products:
Unzip the downloaded file and start the driver installation by double- clicking the provided installer.exe.
Now connect your computer and RME Audio Interface with the supplied cable. Windows detects the new hardware as a new device.
During driver installation the programs Totalmix (TotalMix FX) and Settings are copied to the Applications folder. They will automatically start into the dock if a RME Audio Interface is connected. A reboot of the computer is not required.
Firmware Flash Update
The Flash Update Tool updates the product firmware to the latest version. It requires an already installed driver.
Start the provided exe program. The Flash Update Tool displays the current revision of the firmware and whether it needs an update or not. If so, simply press the ‘Update’ button. A progress bar will indicate when the flash process is finished (Verify Ok).
After the update the unit needs to be reset. This is done by temporarily powering down the device. A reboot of the computer is not necessary.
When the update fails (status: failure), the unit’s second BIOS will be used from the next cold boot on (Secure BIOS Technology). Therefore the unit stays fully functional. The flash process should then be tried again on a different computer.
Flash Update Tool. Updates HDSPe MADI card to firmware version 33, HDSPe PCI and HDSPe ExpressCard card to 20, RayDAT to 16, AES to 11, MADIface to 23, AIO to 14.
