How To Run Windows Applications On Linux [Beginners Guide]

Last updated September 12, 2019 By Munif Tanjim 41 Comments

As you’re here, I’m going to assume that you’re a Linux user. And every once in a while, you find yourself asking: can I run windows applications on Linux?.

Answer to that question is yes. Yes, you can run Windows applications in Linux. Here are some of the ways for running Windows programs with Linux :

Both of them works just fine. But they are somewhat resource hungry.

If you only need to use a small Windows application, installing Windows on a separate HDD partition or as a Virtual Machine is not efficient. Moreover, Virtual Machine can’t utilize the total power of your machine. So, what is the solution?

No worries, there is another way to use Windows software on Linux. It’s called Wine. If you aren’t yet familiar with it or you are a beginner in the world of Linux, this article is for you.

In this beginner’s guide, I’ll show you what is Wine and how to use it to run Windows software on Linux. I have used Ubuntu here as Ubuntu is one of the best Linux distros for beginners, but any other Linux distribution will have more or less same steps (except for the commands in Arch or Fedora based distros).

Using Wine to run Windows programs in Linux

Wine stands for Wine Is Not an Emulator. And WINE is actually an acronym for that. And as previously stated, it’s not even a virtual machine.

Rather it is a compatibility layer for running Windows applications on UNIX-like or POSIX-compliant operating systems (e.g. Linux, Mac, BSD). While a virtual machine or emulator simulates internal Windows logic, Wine translates those Windows logic to native UNIX/POSIX-complaint logic.

In simple and non-technical words, Wine converts internal Windows commands to commands your Linux system can natively understand.

Installing Wine

There are various ways to install Wine on your system. As this is a beginners’ guide, I’ll describe the most straightforward one here.

Almost all the Linux distros come with Wine in their package repository. Most of the time the latest stable version of Wine is available via package repository. Installing Wine on Ubuntu is as easy as firing up a terminal and running these commands:

However, if you are using an 64bit installation of Ubuntu, you will need to run these additional commands:

This will add 32bit architecture support on your distro which will benefit you in installing specific software. If you don’t know whether you have a 32bit installation or 64bit, check this article: 32bit or 64bit Ubuntu?

What Windows applications are Supported by Wine?

There is a large number of Windows applications that are currently fully supported by Wine. They will run without any hassle.

However, new Windows applications are being developed every day. Many of them wouldn’t function as we want on Wine. But the development pace of Wine is also rapid, support for new applications is being added all the time.

And there is a dedicated database for keeping track of just that.

Wine Application Database has almost 24,000 applications rated with different status depending upon how well that applications run in Wine. If you want to quickly check the rating of the application you want to use in Wine, you can take a look there. Here are the meaning of those ratings:

• Platinum: These applications install and run flawlessly in out-of-the-box Wine.
• Gold: These applications work flawlessly with some special configuration.
• Silver: Applications with minor issues are tagged as Silver.
• Bronze: The Bronze ones have major issues that seriously affect usage.
• Garbage: These simply won’t run on Wine.

Reviews, Installation Procedure, which Wine version it was tested against and various useful data are also available for each application here.

Of course, Wine Application Database is mostly user-generated data, so you are always welcome to try running an application with a different version of Wine and share your result with rest of the community.

Finding an Application in Wine Application Database

Let’s see how we can find an application in Wine Application Database.

Go to Wine Application Database. Click Browse Apps from the left sidebar.

Write the name of the application you want to find in the Name field.

Click on the link to the application from the search result.

You’ll see a description of the application. There will be a list of various versions with their compatibility rating with a specific Wine version.

Let’s click on the latest version link.

This is the main page you need to check. There will be detailed information about that specific version.

You’ll get an idea of what will work and what will not. Also, the installation procedure will be included here if any additional tasks are needed for installation.

Getting Started with Wine

Before we go on installing and running applications in Wine, we should have clear idea about a few things and about how to configure Wine for usage:

WinePrefix

Windows applications need a C: drive. Wine uses a virtual C: drive for this purpose. The directory of this virtual C: drive is called wineprefix. First of all, we need to create a wineprefix. For doing that, fire up a terminal and enter this command:

This will create a wineprefix and open the configuration window for Wine. You can change the configuration options if you want or let it be as is for time being and close it. Now, you can locate the virtual C: drive at

The general rule is to install each new application into a fresh wineprefix. We can create and maintain multiple wineprefix manually. But that task would seem rather tedious for the beginners. So, we will skip that part for now. But, later I’m going to show the way for doing that part with ease.

Installing an Application with Wine

Installing a supported application in Wine is generally as easy as double-clicking on the installation file. However, we are now going to see a step-by-step guide for installing 7-zip on Wine.

First of all, check for 7-zip rating on Wine Application Database. It has Platinum rating, so we are good to go. Open Wine configuration ( winecfg ) and set the Windows Version to Windows 7.

Right-click on the 7-zip installation file and select Open With Wine Windows Program Loader.

See that destination folder path? 7-zip installation has recognized the virtual C: drive from wineprefix.

Finish the installation and go to the installation directory [ $HOME/.wine/drive_c/Program Files/7-zip/ ] from the file browser.

Right-click on 7zFM.exe and go to Properties > Open With.

Select Wine Windows Program Loader and close the window. Double-click on 7zFM.exe.

And there you go! For creating a shortcut on your desktop, right click on the file.

Now move the Link to Desktop.

Now, you can run 7-zip just from your desktop. All you have to do is double-click on the icon.

If you want to access your files on Linux, they are generally located in Z: Drive.

You can use the 7-zip just as you would use it on Windows – for extracting and creating archives and such.

Let’s make things (a lot) Easier

You might have noticed that, at Wine Application Database, with every version of application review a specific Wine version is mentioned.

It is because of the rapid development rate of Wine. Though an application runs with the current version of Wine, it might not run with a future version, because of the changes made.

Also, I’ve mentioned about installing each application in its own fresh wineprefix. So that, an application has no chance of interfering with another. And doing all these manually, usually from the terminal, is time-consuming, tiresome and at times, confusing.

PlayOnLinux is here to rescue. It provides a nice interface for doing all these things easily. For installing PlayOnLinux on Ubuntu, simply run this command:

You can easily perform every task related to Wine with PlayOnLinux from a beautiful and intuitive graphical interface:

• Installing & Uninstalling applications.
• Creating, Updating & Removing wineprefixes.
• Maintain Wine of different architecture and versions.
• Run & Create shortcut for installed applications.
• And so on…

But still, you will need to check Wine Application Database for reviews, installation procedures and such.

Advantages of using Wine

When it comes to running Windows applications on Linux system, Wine provides many advantages over using emulators or virtual machines.

• Performance: Wine is immune to the performance loss that otherwise occurs while emulating.
• Native Experience: There is no need to open Wine before running a Windows application. Exactly how Wine works will be more clear from this quote from official site,

Wine can be thought of as a Windows emulator in much the same way that Windows Vista can be thought of as a Windows XP emulator: both allow you to run the same applications by translating system calls in much the same way. Setting Wine to mimic Windows XP is not much different from setting Vista to launch an application in XP compatibility mode.

Wine Derivatives

There are quite a number of projects for running Windows applications on other platforms, based on Wine:

• CrossOver: CrossOver is a developed by the company named CodeWeavers. It is directly based on Wine with a few tweaks and proprietary add-ons. In fact, CodeWeavers employs a large portion of Wine developers. Unlike the rapid releases of Wine, CrossOver releases are more stable. The one and major downside is that Crossover is not free.
• PlayOnLinux: PlayOnLinux is completely based on Wine. And provides easier route for installing and managing application with Wine. PlayOnLinux is free.
  It is also available for Mac as PlayOnMac.
• ReactOS: ReactOS is an entirely different open-source operating system for running Windows applications. It reuses a considerable amount of codes from Wine. However, this is a project under development for more than a decade and I won’t recommend it.

Additional Tips on using Wine

Winetricks

This is another important part of using Wine. Winetricks is a helper script to download and install various redistributable runtime libraries needed to run some applications in Wine. These may include replacements for components of Wine using closed source libraries. Winetricks comes with Wine installation on Ubuntu.

For starting winetricks, run this command:

There are many options for helping you with various tasks.

Installing an Application with Winetricks

If you Install an app from winetricks, it will be installed in a separate wineprefix. Let’s install VLC:

It will then begin to download the VLC installation files. And then guide you through the rest of the process. It’s pretty simple.

Install Windows DLL or components and others

You can select a wineprefix from winetricks and install various libraries and components required by the application you want to run and also perform other operations.

N.B.: If using winetricks seems complicated to you, it’s perfectly okay. I feel the same way too. I always use PlayOnLinux for this reason. PlayOnLinux can do everything you might need to do from winetricks.

For more information you can check Wine FAQ and Documentation.

I hope you find this complete beginner’s guide to using Wine in Linux helpful. Now you can run Windows programs in Linux without installing a virtual machine or dual booting.

Let us know if you have any questions or opinion in the comment section below.

Like what you read? Please share it with others.

How to run Windows software in Linux: Everything you need to know

• 
• 
• 
• 
• 
• 

Today’s Best Tech Deals

Picked by PCWorld’s Editors

Top Deals On Great Products

Picked by Techconnect’s Editors

Linux is more capable than ever. With over 1,000 Linux games available on Steam and a general shift towards more web-based desktop software, there’s less need for Windows than ever. After all, you can now watch Netflix on Linux without any hacks, and you can even use Microsoft Office on Linux—a web-based version of it, at least.

But, as most dedicated Linux desktop users will eventually discover, there comes a time when you just need to run a particular piece of Windows software on your Linux PC. There are quite a few ways to do so. Here’s what you need to know.

Wine is a way to run Windows software on Linux, but with no Windows required.

Wine is an open-source “Windows compatibility layer” that can run Windows programs directly on your Linux desktop. Essentially, this open-source project is attempting to re-implement enough of Windows from scratch that it can run all those Windows applications without actually needing Windows.

This is the only method here that won’t actually require a copy of Windows, but the downside is that it won’t run every application properly. You may encounter bugs or performance issues, especially if you’re using Wine to play video games. But if you’re running a popular game released a few years ago, you may find that it performs very well. Many people use Wine to play World of Warcraft on Linux, for example. You can get an idea of how an application will run and any tweaks it might require by visiting the Wine Application Database website and searching for that application.

PlayOnLinux’s version of Wine, running on Ubuntu.

First, download Wine from your Linux distribution’s software repositories. Once it’s installed, you can then download .exe files for Windows applications and double-click them to run them with Wine. You can also try PlayOnLinux, a fancy interface over Wine that will help you install popular Windows programs and games.

Codeweavers also offers a commercial version of Wine, known as CrossOver Linux. You have to pay to use it, but Codeweavers tries to go out of their way to officially support popular applications (like Microsoft Office, Adobe Photoshop, and some big PC games) and ensure they work properly. Codeweavers also contributes its changes back to the main Wine project.

Virtual machines

Virtual machines are a very convenient way to run Windows software on your Linux PC. As PCs have gotten faster, virtual machines have become comparatively more lightweight.

This process involves installing a copy of Windows in a “virtual machine” program like VirtualBox, VMware, or Linux’s built-in KVM (Kernel-based Virtual Machine) solution. That copy of Windows thinks it’s running on real hardware, but it’s really running in window on your desktop. Modern virtual-machine solutions can even break Windows programs running in the virtual machine out of that window, allowing them to act like normal windows on your Linux desktop.

VirtualBox in Ubuntu Linux.

This solution is more foolproof than Wine. As you’re running those Windows applications on an actual copy of Windows, you won’t encounter bugs.

Using a virtual machine does require a full copy of Windows, however, and there is more hardware overhead because that copy of Windows has to be running alongside your primary operating system. In particular, demanding PC games that need access to your computer’s graphics card won’t perform well at all—you’re better off with Wine for those. But for productivity applications like Microsoft Office or Adobe Photoshop, this is an excellent solution.

Dual-booting

Dual-booting isn’t technically a way to run Windows software on Linux itself, but it is how many Linux users run Windows software. Rather than using it directly under Linux, you just reboot your computer, choose Windows, and boot into Microsoft’s operating system. The Windows software can then run in its native environment. Thanks to modern solid-state drives, that reboot process should be faster than ever.

Installing Linux in a dual-boot configuration.

This is particularly ideal if you’re a PC gamer who just can’t give Windows up yet. Rather than forgoing all those Windows games, you can just reboot your computer when you want to play Windows-only games. As you’re using plain-old Windows running directly on the hardware, you won’t have to deal with any compatibility or performance headaches.

The best way to set up a dual-boot system is to install Windows first—if your computer came with Windows installed, that’s good enough. Next, install the Linux distribution of your choice and tell it to install alongside Windows. You’ll then be able to choose your preferred operating system each time you boot your computer. This Ubuntu guide to installing Linux beside Windows can help walk you through the process.

Want to stay up to date on Linux, BSD, Chrome OS, and the rest of the World Beyond Windows? Bookmark the World Beyond Windows column page or follow our RSS feed.

The best option really depends on what you’re trying to do. If you need to run a single application or game that works well in Wine, Wine may be ideal. If you need to run a variety of desktop applications—like the most modern versions of Office and Photoshop, which Wine might struggle with—a virtual machine will be best. If you’re a PC gamer who still wants to play the latest Windows games, dual-booting will give you the performance you want without the headaches of Wine.

When freelance writer Chris Hoffman isn’t writing about gadgets and software, he’s probably using them in his spare time.