Samsung scx 4100 mac os driver

Question: Q: Samsung SCX-4100 printer driver

hiya
I just bought a Samsung laser printer and realized that Samsung has removed the driver!!
Where can I get the driver for this model?

Power Book G4 Mac OS X (10.4.8)

Posted on Jan 19, 2007 4:44 PM

All replies

Loading page content

Page content loaded

Jan 19, 2007 5:15 PM

The Owner’s Manual indicates that this printer uses the Samsung Printer Language. Try the Samsung-GDI pacakge from linuxprinting.org. Use the driver for the SCX-4500 which looks to be similar.

You will also have to install the ESP Ghostscript that is on that page as well.

Mac Mini G4; B&W G3/300

Jan 19, 2007 6:05 PM

The Owner’s Manual indicates that this printer uses
the Samsung Printer Language. Try the Samsung-
GDI pacakge from linuxprinting.org. Use
the driver for the SCX-4500 which looks to be
similar.

You will also have to install the ESP Ghostscript
that is on that page as well.

thanks for your message.
I have been on the page of http://openprinting.org/show_driver.cgi?driver=lj5mono for a while and I still do fine model you suggested. did I miss some points and get lost?
I am sorry as a new number, my knowledge is very little. could you tell me in more details?
thanks

Jan 19, 2007 6:40 PM

thanks for your message.
I have been on the page of
http://openprinting.org/show_driver.cgi?driver=lj5mono
for a while and I still do fine model you suggested.
did I miss some points and get lost?
I am sorry as a new number, my knowledge is very
little. could you tell me in more details?
thanks

I’m not quite sure how or why you got to that page. The link I gave you in the first message should take you to the page that has everything you need. Here is the page link again—

Download «samsung-gdi-foomatic-1.0.ppc.dmg» and «espgs-7.05.5-0.ppc.dmg» and install the software from those downloads. Then go to Printer Setup Utility and add your printer. The system will not match your printer to any driver. You will have to manually choose the SCX-4500 model.

To add a printer, Tiger (OS X 10.4.x) users should open the Printer Setup Utility and click on the Add icon at the top of the Printer List window. A new window will open. In that window, click the Default Browser icon at the top left. Highlight your printer in the section below. Use the «Print Using» pop-up menu near the bottom of the window to select the correct PPD for your printer and click Add.

Mac Mini G4; B&W G3/300

Jan 19, 2007 6:58 PM

Dear Matt
I have downed load «samsung-gdi-foomatic-1.0.ppc.dmg» and «espgs-7.05.5-0.ppc.dmg» and installed to my laptop. However, when I tried to add a new printer, I did not see the model of scx4500 but ML-4500. When I added this model, the printer was not responding.
then I download the scx-4100 for linux, it showed the process Scx-4100 stopped unexpectedly with status 8.

I am very confused.

very big thanks to you

Jan 19, 2007 8:12 PM

My apologies for misreading/mistyping the model number. This might still work if you make a change in the Printer Features section under the Copies & Pages pop up menu that appears when you print a job. You can try to set the color mode to Grayscale. The ML-4200 is a color printer while your SCX-4200 is not. That change alone may enable you to print.

Now I’m going to confuse you a bit. I did some searching on the web and found where someone has privately posted the Samsung OS X driver for the SCX-4100. You can download it from . Possible problem: I found mention that this driver does not work in OS X 10.4. I would recommend that you install it anyway and give it a try. If it works, great. You can disregard the rest of this post. If it doesn’t, read on.

I also found a reference that said that the Samsung SCX-4200 driver will work in OS X 10.4 and will work with your SCX-4100. You can download that driver from Samsung’s site If you got this far and have needed to install this software, you can try setting up your printer to use the SCX-4200 driver.

Hopefully, one of these options will get your printer working. Let us know how it goes.

Mac Mini G4; B&W G3/300

Jan 20, 2007 9:26 AM

Question: Q: Samsung SCX-4100 printer driver More Less

Источник

Samsung Drivers

Samsung SCX-4100 Download Driver

Samsung SCX-4100 Laser Multifunction Printer Driver Downloads – Microsoft Windows

Samsung SCX-4100 Windows Driver Details

OS: Win 2000/XP/2003/2008/Vista/Win 7/Win 8(32/64bit)

Size: 21.34 MB, EXE

Language: MULTI LANGUAGE

Samsung SCX-4100 Scan Driver Details

OS: Win Vista/2008/Win 7(32,64bit)

Size: 5.24 MB, EXE

Language: MULTI LANGUAGE

Samsung SCX-4100 Remote Control Panel Driver Details

OS: Win 98/ME/2K/XP

Size: 2.85 MB, EXE

Language: MULTI LANGUAGE

All information on this site is quoted.

Categories

New Drivers

Privacy Overview

This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.

Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.

Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.

Источник

Підтримка користувачів HP — Завантаження програмного забезпечення та драйверів

hp-detect-load-my-device-portlet

hp-contact-secondary-navigation-portlet

Виберіть вашу модель

Let HP find my products

HP can identify most HP products and recommend possible solutions.

hp-hero-support-search

Допомога з пошуком

Поради для покращання результатів пошуку

• Перевірити орфографію та розміщення пробілів — Приклади: зминання паперу
• Використайте ім’я моделі продукту: — Приклади: laserjet pro p1102, DeskJet 2130
• Для продуктів HP введіть серійний номер або номер продукту. — Приклади: LG534UA
• Для продуктів Samsung Print введіть К/М або код моделі, вказаний на етикетці продукту. — Приклади: «SL-M2020W/XAA»
• Додайте ключові слова разом з назвою продукту. Приклади: «LaserJet Pro P1102 зминання паперу», «EliteBook 840 G3 bios update»

Потрібна допомога у пошуку назви продукту, номера або серійного номера продукту?

hp-share-print-widget-portlet

Знайдіть поширені запитання та відповіді тут.

Виправте та вирішіть проблему з оновленням Windows 10 на комп’ютері або принтері HP. Натисніть тут

Швидше зв’язуйтесь зі службою підтримки HP, керуйте всіма своїми пристроями в одному місці, переглядайте інформацію про гарантію тощо. Створити акаунт HP

The website is under updating / веб-сайт оновлюється

hp-miscellaneous-portlet

hp-product-information-portlet

Програмне забезпечення і драйвери для

Samsung SCX-4100 Laser Multifunction Printer series

hp-software-driver-metadata-portlet

Помічник з завантаження та встановлення

Для отримання найкращих результатів ми рекомендуємо скористатись допомогою нашого помічника з завантаження та встановлення.

Помічник з завантаження та встановлення

Завантаження HP Support Solutions

Помічник з завантаження та встановлення

Solution and Diagnostic Data Collection

This product detection tool installs software on your Microsoft Windows device that allows HP to detect and gather data about your HP and Compaq products to provide quick access to support information and solutions. Technical data is gathered for the products supported by this tool and is used to identify products, provide relevant solutions and automatically update this tool, to improve our products, solutions, services, and your experience as our customer.

Note: This tool applies to Microsoft Windows PC’s only. This tool will detect HP PCs and HP printers.

• Операційна система
• Browser version
• Computer vendor
• Product name/number
• Serial number
• Connection port
• Driver/device description
• Computer and/or printer configuration
• Hardware and software diagnostics
• HP/Non-HP ink and/or HP/Non-HP Toner
• Number of pages printed

Installed Software Details:

• HP Support Solutions Framework: служба Windows, localhost, веб-сервер і ПЗ

Removing Installed Software:

• Remove «HP Support Solutions Framework» through Add/Remove programs on PC

• Operating System — Windows 7, Windows 8, Windows 8.1, Windows 10
• Browser — Google Chrome 10+, Internet Explorer (IE)10.0+, and Firefox 3.6.x, 12.0+

Источник

Универсальный драйвер для принтера и сканера Samsung

Если вам нужны только основные функции — возможность печатать и сканировать, то можно установить универсальный драйвер. Это программное обеспечение подходит ко всей печатной технике Samsung. То есть, вы можете установить на свой компьютер универсальный драйвер для принтера и/или сканера и, подключившись к любому устройству Samsung, распечатывать или сканировать.

Если ваш компьютер подключен к нескольким печатающим устройствам Samsung, то, установив универсальный драйвер, вы сможете использовать любое устройство.

Условия использования ПО в лицензии НР .

Для принтера

Windows 2003-2016/XP-10

Разрядность: 32/64
Язык: Русский + Другие

*Не поддерживает Windows XP.

Mac OS X 11.0

Язык: Русский + Другие
Версия: 3.93.01
Дата: 11.02.2021

Mac OS X 10.15

Язык: Русский + Другие
Версия: 3.92.00
Дата: 16.09.2020

Для сканера

Windows 2003-2012/XP-10

Разрядность: 32/64
Язык: Русский + Другие
Версия: 1.02.19
Дата: 01.11.2017

Установка

Скачиваете драйвер. Заходите с правами администратора в систему. Подключаете принтер к компьютеру. Запускаете скачанный файл. В сообщении контроля учетных записей — разрешаете установку. Выйдет окошко ниже. Выбираем «Установить».

Запустится программа установки. «Далее».

В параметрах установки нажимаете «Далее».

Программа найдет подключенный к ПК принтер и установит драйвер.

Источник

Anyone get SCX-4100 scanning?

Gentile

macrumors regular

I have a Samsung SCX-4100 multifunctional printer. There is a mac printer driver, but no twain/scanner driver.

Has anyone gotten this to scan under OS X?

I tried Sane, but there is only an external Linux backend available.

cdcastillo

macrumors 68000

Gentile

macrumors regular

I tried that, the iMac does says there is no scanner attached. I also tried to use Preview and «import image» and I get the same message.

It appears the scanner function works only for Linux or Windows

Anyone know any differently?

senorfrog97

macrumors regular

macrumors regular

I got it working!

macrumors regular

I got it working!

I got the scanner in my SCX-4100 working with the Samsung SCX-4500 scan driver (I also use the SCX-4500 print driver.)

Steps:
1. Download the driver. I used 20071224134136734_SCX-4500_OS_X_Scan.zip
2. Unzip the package
3. Open up MAC_TWAIN/SamsungSCX-4500Series.ds/Contents/Info.plist in your favorite text editor
4. Find the product key in the IOUSBDevice section (line 43
5. Change the value from 0x3426 to 0x3413
6. Do the same for MAC_TWAIN/SamsungSCX-4500Series.ds/Contents/Resources/Info.plist
7. Open up MAC_TWAIN/SamsungSCX-4500Series.ds/Contents/Resources/Defaults.plist
8. Find the PID key (line 16)
9. Change the value from 0x3426 to 0x3413
10. Install the driver as normal

The scanner works in Image Capture. To use it, I have to go to Devices->Browse Devices and then click on Use TWAIN UI. (Note that the scanner does not say it is connected on that screen — do TWAIN scanners normally act like this?)

macrumors regular

CampyCapybara

macrumors newbie

Thank you soooooo much, jf8!

Just prior to trying out your method, I called up my Samsung tech support, and all they could advise me was to check that the next printer I buy from them has Mac OS capability! Even when I asked them if they would contact me if they were to create drivers for the SCX-4100, they told me that the onus was on me to check the site regularly to see if they would update their drivers!

Needless to say, short of junking my machine because I changed from a Windows platform to a Mac platform, I tried out your method. Not only was it easy as pie to do, the SCX-4100 worked perfectly and I’m only too happy that I don’t have to get a new scanner!

Thank you! Thank you! Thank you!

bosweg

macrumors newbie

driver still available?

JF8, I’m tring to get mt SCX 4100 to scan and found your solution. Samsung have removed the driver from their website. do you still have a copy of the driver? I would really appreciate a copy.
Regars,
Bosweg

hizzle

macrumors newbie

Here are the complete drivers for Mac (patched scan + print) for the SCX-4100. I uploaded it to 4 hosts, so hopefully 1 will be working/alive when someone needs it.

Note: Thanks a lot to jf8 for that awesome hack. I no longer need to boot up Parallels to get in a scan I think I love you.

aalsayed89

macrumors newbie

I registered in this forum just to thank jf8 and hizzle.
Thanks guys.

gfrog123

macrumors newbie

Thank you jf8 and hizzle . Finally my printer works correctly! I thought I had to buy a new one.

ariaa

macrumors newbie

Just registered solely to say thanks for this. I can finally apply for my Phd!

Tryria

macrumors newbie

I also need this!

I have just changed to a MacBook and I too have a MFP SCX-4100. I found all the instructions and have done the best to try and follow them. However, the four links that hizzle posted can’t be accessed by my Safari. Very frustrating.

Are these links still active? I see that ariaa was successful in April this year.

Anyone of you who have been on this road able to give me some advise? Would so appreciate it.
Tryria

senorfrog97

macrumors regular

ekantola

macrumors newbie

speedo812003

macrumors newbie

Thanks guys! I had been searching for a solution to make my SCX-4100 printer work with my new Mac book pro for such a long time. I finally made it to work by following the steps detailed by jeff!!
Cheers!

spicymustard

macrumors newbie

mhauck7

macrumors newbie

link for driver

If that link is dead, just google
20071224134136734_SCX-4500_OS_X_Scan.zip

Giuly

macrumors 68040

ReneR

macrumors 6502

MacTiger14

macrumors newbie

how scx-4100 scan works with OSX Mountain Lion

I upgraded my MacBook Pro to OSX 10.8.5 (Mountain Lion).
I followed all the steps described by jf8 on May 18, 2008 04:23 PM but ImageCapture did not recognize my SCX-4100.

But with the following trick it worked:
(the idea for that I got obviously from jf8’s post — so thanks to him).

On /Macintosh HD/Library/Image Capture/Devices/ there was a
‘Samsung Scanner.app’ (dated from Feb. 11, 2010).

So I opened the terminal.app and went to

>>> cd /Library/Image\ Capture/Devices/Samsung\Scanner.app/Contents/Resources/

There I changed «DeviceMatchingInfo.plist» and «deviceInfo.plist»
(>>> e.g. sudo vi DeviceMatchingInfo.plist / deviceInfo.plist )

I searched in both files for key/value entries

which appear under some kinds of «Samsung SCX-4500» sections in these files.
According to jf8 post I changed both these ids to «0x3413» and restarted my mac.

Now the scan-option was available!
(When opening the ImageCapture.app, the SCX-4100 was listed among devices as well as on
«System preferences->print&scan->Samsung SCX-4100»
now the «Scan» button appears.

And the Scan works very fine for this Samsung model!

Hans Spicar

macrumors newbie

Samsung SCX-4100 works with Mac OS X 10.10.4!

Using the advice from jf8 and MacTiger14 i just got my fathers old Samsung printer/scanner working with OS X 10.10.4.

I got the printer working by downloading and installing the printer driver from Samsung for SCX-4500. OS X «sees» the SCX-4100 printer but you have to assign the printer driver for SCX-4500 to it. This is done in system settings/printers.

I also downloaded the scanner driver and software for SCX-4500 but only installed the driver. I am not confident with using the terminal and to edit the above mentioned files required root privileges. The easy solution is to copy the files, make the changes, save, erase the original files and replace them with the edited files (admin privileges needed). Filenames have to be identical.

Pay attention to that App Store software update will suggest to install a newer Samsung printer driver but that will break scanning. You have to make the changes in the files again to make it work.

I’m swedish so excuse my somewhat strange «accent».

ama-ar-gi

macrumors newbie

Samsung SCX-4100 works with Mac OS X 10.10.4!

Using the advice from jf8 and MacTiger14 i just got my fathers old Samsung printer/scanner working with OS X 10.10.4.

I got the printer working by downloading and installing the printer driver from Samsung for SCX-4500. OS X «sees» the SCX-4100 printer but you have to assign the printer driver for SCX-4500 to it. This is done in system settings/printers.

I also downloaded the scanner driver and software for SCX-4500 but only installed the driver. I am not confident with using the terminal and to edit the above mentioned files required root privileges. The easy solution is to copy the files, make the changes, save, erase the original files and replace them with the edited files (admin privileges needed). Filenames have to be identical.

Pay attention to that App Store software update will suggest to install a newer Samsung printer driver but that will break scanning. You have to make the changes in the files again to make it work.

I’m swedish so excuse my somewhat strange «accent».

Источник