Sentinel linux ��� ���

Hard Disk Sentinel (Linux Edition) Examines the Health and Temperature of Your Hard Disks

Author : Andrew | Posted: August 17, 2009

List of features

• display hard disk / solid state disk information on the terminal
• create comprehensive report about the disk system, including both hard disk and SSD specific features (for example, media rotation rate, TRIM command, etc.)
• display and manage acoustic setting of hard disks (on supported USB disks also)
• offers outputs for both users and scripts/other applications to process

The following information are displayed:

• detected hard disk number and device name (for example /dev/sda)
• size, model ID, serial number, revision and interface of all detected hard disks
• temperature, health and performance values
• power on time (days, hour, minutes — if supported)
  Note: this is for informational purposes only, the value displayed under Windows (after some minutes of testing) may be more accurate
• acoustic management settings (if supported and -aam or -setaam option is used

How to use Hard Disk Sentinel

• -h — displays help and usage information
• -r [report file] — automatically save report to filename (default: report.txt)
• -dump — dump report to stdout (can be used with -xml to dump XML output instead of text)
• -xml — create and save XML report instead of TXT
• -solid — solid output (drive, tempC, health%, power on hours, model, S/N, size)
• -verbose — detailed detection information and save temporary files (only for debug purposes)
• -aam — display acoustic management settings (current and recommended level)
• -setaam drive_num|ALL level(hex)80-FE|QUIET|LOUD — set acoustic level on drive 0..n (or all)
  80 or QUIET is the lowest (most silent) setting, FE or LOUD is the highest (fastest) setting
  For example: hdsentinel -setaam 0 loud — Configures drive 0 to fastest (loud) setting. Same as hdsentinel -setaam 0 FE

Usage examples:

Optimize complete system for silence:

Optimize complete system for high performance (but louder disk access):

Источник

Центр загрузки Sentinel

Утилита для записи лицензий в ключи HASP 4 HASPEdit: HASPEDIT.zip

Драйвер для Windows. Версия 4.116 (интерфейс: консоль): HASP4_driver_cmdline.zip

Драйвер для Windows. Версия 8.23 (интерфейс: GUI): Sentinel_LDK_Run-time_setup

Драйвер для Mас OS. Версия 1.91 (интерфейс: GUI): MacOSX.dmg

Драйвер Sentinel HASP для Linux. Версия 8.23: Sentinel_LDK_Run-time_Installer.tar.gz

Менеджер лицензий для Windows. Версия 8.32: HASP_LM_setup.zip

Менеджер лицензий для Linux. Версия 8.3: hasplm_linux_8.30.tgz

Менеджер лицензий для Mac OS. LM_Setup_Mac.dmg

Утилита Aladdin Monitor. Версия 1.4.2: Monitor_Setup.zip

Утилита DiagnostiX. Версия 1.10: Aladdin_Diagnostix.zip

Драйверы для ключей Hardlock PCMCIA: pcmcia.zip

Утилита для установки HL-Server: hlsw32_inst.zip

Утилита для установки комплекса программ Hardlock Bistro. Версия 2.5: bistro32_inst.zip

Утилита DiagnostiX. Версия 1.10: Aladdin_Diagnostix.zip

Драйвер Sentinel HASP для Windows. Версия 8.23 (интерфейс: GUI): Sentinel_LDK_Run-time_setup.zip

Драйвер Sentinel HASP для Windows. Версия 8.23 (интерфейс: консоль): Sentinel_LDK_Run-time_cmd_line.zip

Драйвер для MAC OS. Версия 8.23 (интерфейс: GUI): Sentinel_LDK_RTE_Installer.dmg

Менеджер лицензий для Windows. Версия 8.32: HASP_LM_setup.zip

Менеджер лицензий для Linux. Версия 8.3: hasplm_linux_8.30.tgz

Менеджер лицензий для Mac OS. Версия 8.3: LM_Setup_Mac.dmg

Утилита Aladdin Monitor. Версия 1.4.2: Monitor_Setup.zip

Утилита DiagnostiX. Версия 1.10: Aladdin_Diagnostix.zip

Внимание, комплект разработчика Sentinel HASP 5.12 является устаревшем. Рекомендуем вам использовать его только для перехода на Sentinel LDK c более старых версий.

Драйвер Sentinel HASP для Windows. Версия 8.23 (интерфейс: GUI): Sentinel_LDK_Run-time_setup.zip

Драйвер Sentinel HASP для Windows. Версия 8.23 (интерфейс: консоль): Sentinel_LDK_Run-time_cmd_line.zip

Драйвер Sentinel HASP для Linux. Версия 8.23: Sentinel_LDK_Run-time_linux.zip

Драйвер Sentinel HASP для Mac OS X. Версия 8.23: Sentinel_LDK_RTE_Installer.dmg

Определение причин блокировки Sentinel SL из-за смены оборудования : C2V Decoder

Обновление USB-ключей HASP HL до функциональности HASP SRM с помощью файла V2C: HASP_HL_Firmware_Update_v2c.zip

Обновление USB-ключей HASP HL до функциональности HASP SRM с помощью утилиты Firmware Update: HASP_HL_Firmware_Update.zip

Руководство к Sentinel LDK на русском языке: скачать

«Быстрый старт» к Sentinel LDK на русском языке: скачать

Обзор возможностей Sentinel EMS Web Service API на русском языке: скачать

Подробное видео-руководство по работе с Sentinel LDK на русском языке: смотреть

Драйвер для ключей Sentinel SuperPro, Sentinel UltraPro и SHK для Microsoft Windows. Версия 7.6.0: Sentinel System Driver Installer 7.6.0.zip

Драйвер для ключей Sentinel SuperPro, Sentinel UltraPro и SHK для Linux & MacOS. Версия 1.3.1.6: sentinel_keys_protection_installer_1.3.1.6.zip

Утилита диагностики для проверки системы и создания файла отчета (Sentinel Advanced Medic) для Microsoft Windows: SAM131.exe

Утилита для удаления Sentinel System Driver: SSDCleanup_1.2.0.5.zip

Источник

HARD DISK MONITORING

Hard Disk Sentinel Linux GUI (Graphical User Interface)

The following packages install Hard Disk Sentinel Linux version with a graphical user interface showing the status of the first hard disk/SSD (usually where Linux installed) in a window. The user interface also has a tray icon showing the actual temperature of the hard disk drive / SSD.

Thanks for Gregory25 for his hard work, making and sharing these packages. Upon any question, thoughts, ideas, experiences feel free to contact in e-mail by hegedusgergomka (at) gmail.com

Downloads

hdsentinel_gui32bit.tar.xz — Hard Disk Sentinel Linux Graphical user interface installer (32 bit version) (22 Apr 2021)

hdsentinel_gui64bit.tar.xz — Hard Disk Sentinel Linux Graphical user interface installer (64 bit version) (22 Apr 2021)

Installation

• Download the proper version for your Linux system
• Open a terminal window
• Change the directory to the folder where you have the downloaded file (may not required if you opened terminal from that folder)
• Type tar -xvf hdsentinel_gui64bit.tar.xz (and press ENTER) to unpack the file
• Type cd cd HDSentinel_GUI (and press ENTER) to change directory to the installer
• Type sudo ./install.sh (and press ENTER) to perform the installation (on newer Ubuntu systems, use ./install.sh only (without sudo).

The packages contain Hard Disk Sentinel Linux version so no further separate download required. Just download and unpack the proper package for your system and launch install.sh to make the installation. The package contains uninstall.sh to uninstall if required.

After installation, a shortcut icon placed on the Desktop (on English and Hungarian Linux distributions) and in the menu which can be used to launch Hard Disk Sentinel GUI. On first startup, it asks for root password which required in order to access disk status information.

Screenshots

Hard Disk Sentinel Linux GUI on KUbuntu

Hard Disk Sentinel Linux GUI on Ubuntu

Hard Disk Sentinel Linux GUI on Light Fedora

Источник

HARD DISK MONITORING

Hard Disk Sentinel Linux Edition (FREE)

By using Hard Disk Sentinel Linux console edition, it is possible to examine the temperature and health information (and more) of IDE, S-ATA (SATA II also), SCSI and USB hard disks connected to motherboard or external controller cards. The user must be root to use this software or start it with sudo.

To display hard disk / SSD status in a graphical interface, download Hard Disk Sentinel Linux GUI (Graphical User Interface) package. Thanks for Gregory25!

To simplify starting Hard Disk Sentinel Linux Edition, it is possible to use one of the Linux Desktop Installers for the actual Linux distribution which allows starting directly from the desktop without the need of starting manually from a console. Thanks for Marc Sayer for these packages!

To receive daily status reports, please check the HDSentinel_EmailUtil.zip package. Thanks for Raul del Cid Lopez for this script!

List of features

• display hard disk / solid state disk information on the terminal
• create comprehensive report about the disk system, including both hard disk and SSD specific features (for example, media rotation rate, TRIM command, etc.)
• display and manage acoustic setting of hard disks (on supported USB disks also)
• offers outputs for both users and scripts/other applications to process

The following information are displayed:

• detected hard disk number and device name (for example /dev/sda)
• size, model ID, serial number, revision and interface of all detected hard disks
• temperature, health and performance values
• power on time (days, hour, minutes — if supported)
  Note: this is for informational purposes only, the value displayed under Windows (after some minutes of testing) may be more accurate
• acoustic management settings (if supported and -aam or -setaam option is used

Command line switches

The switches are NOT case sensitive. Upper and lower case can be used to specify them.

• -h — displays help and usage information
• -r [report file] — automatically save report to filename (default: report.txt)
• -html — use with -r to save HTML format report (-html -r report.html)
• -mht — use with -r to save MHT format report (-mht -r report.mht)
• -autosd — detect industrial SD card type and save flag file (see How to: monitor (micro) SD card health and status for more details)
• -dev /dev/sdX — detect and report only the specified device without accessing others
• -dump — dump report to stdout (can be used with -xml to dump XML output instead of text)
• -xml — create and save XML report instead of TXT
• -solid — solid output (drive, tempC, health%, power on hours, model, S/N, size)
• -verbose — detailed detection information and save temporary files (only for debug purposes)
• -aam — display acoustic management settings (current and recommended level)
• -setaam drive_num|ALL level(hex)80-FE|QUIET|LOUD — set acoustic level on drive 0..n (or all)
  80 or QUIET is the lowest (most silent) setting, FE or LOUD is the highest (fastest) setting
  For example: hdsentinel -setaam 0 loud — Configures drive 0 to fastest (loud) setting. Same as hdsentinel -setaam 0 FE

Please send saved XML or TXT reports, questions or ideas to info@hdsentinel.com to help improving this tool.

License

Hard Disk Sentinel Linux edition is FREE. You can freely distribute and use it to analyse hard disk status. However, if you like this tool and would like to keep it updated, please support further development by registering the Windows version of the software.

Usage of Hard Disk Sentinel Linux version

After downloading the file below, please follow these steps to use it:

• double click to open and decompress it to any folder
• open a terminal window and navigate to the folder
• change file permissions to make it executable by using chmod 755 HDSentinel
• launch it by entering sudo ./HDSentinel [options]
  sudo is not required if you logged in as «root».

Examples

Optimize complete system for silence: hdsentinel -setaam all quiet

Optimize complete system for high performance (but louder disk access): hdsentinel -setaam all loud

Select a balanced level between silence and performance on drive 0: hdsentinel -setaam 0 C0
Note: some disks do not support balanced settings and they may select the most silent (80) or high performance (FE) setting instead.
Please start hsentinel without parameters to see drive assignments (eg. /dev/sda) to drive indexes.

Due to the high amount of requests, it is possible to create minimal output which can be easily parsed and processed for further use. Some examples are:

List disk drives, temperature (in Celsius), health %, power on hours, disk model, disk serial, size:
hdsentinel -solid. Sample results:

List only temperature, drive, size:
hdsentinel -solid | awk ‘‘

List only temperature, drive, model ID, highest temperature on top, drives without temperature information (for example card readers) removed:
hdsentinel -solid | awk ‘‘ | grep -v «^?» | sort -nr

List only health, temperature, drive, lowest health on top, drives without temperature information (for example card readers) removed:
hdsentinel -solid | awk ‘‘ | grep -v «^?» | sort -n

Note that the spaces in hard disk model ID and serial number are replaced with underscore (_).

If you have any ideas, thoughts about the automatic processing of output or if you have complete script(s) you want to share with other users, please send a mail and it will be published on this page with the name and credits of the sender of the script.

Download Hard Disk Sentinel Linux

Compatibility

Kernel support is required to detect and display information about SATA hard disks. This version was successfully tested under the following systems:

• blackPanther OS v16.2 SE
• CentOS 5, 6 and newer
• Fedora 5, 6, 7, 8, 9, 10, 15 and newer
• Ubuntu 8.04 server kernel 2.6.24-16-server, 9.04
• Kubuntu 8.04
• Xubuntu 8.04
• Slackware 11.0
• UHU Linux 2.1
• SuSe 10.2, SuSe 10.3 (SuSe 10.0 — NOT working, reports wanted)
• Debian Lenny 5.0
• Debian GNU/Linux 6.0.1 Squeez
• Raspberry PI (ARM CPU)
• NAS boxes (ARM CPU): WD MyBook Live, D-Link DNS-320LW two bay Sharecenter, D-Link DNS-327L two bay Sharecenter, Seagate FreeAgent DockStar, Zyxel NSA320, Synology DS211. DSM 5.0-4493 update 3

Successfully tested with Adaptec SCSI controllers and SCSI hard disks, and with external enclosures built with different USB-ATA bridge in chips USB Hard disks, hard disk enclosures. Supports LSI / Intel / IBM RAID controllers too.

Updates

0.19

28/2/2021

added support of newer SATA, SAS, NVMe M.2 PCie SSDs: detect health, temperature, and complete self-monitoring S.M.A.R.T. status added support of newer hard disk drives, hybrid drives: detect health, temperature, and complete self-monitoring S.M.A.R.T. status added support of newer NVMe-USB adapters / converters added support of ORICO 3559U3 5-bay external USB 3.0 hard disk enclosure added support of Yottamaster 4-bay and FS5U3 5-bay external USB 3.0 hard disk enclosure improved detection of NVMe M.2 SSDs under Linux. Detect health, temperature and complete self-monitoring S.M.A.R.T. status of NVMe M.2 SSDs connected to motherboard (nvme0, nvme1, etc. devices)

0.18

7/11/2019

added detection of NVMe M.2 SSDs under Linux. Detect health, temperature and complete self-monitoring S.M.A.R.T. status of NVMe M.2 SSDs connected to motherboard (nvme0, nvme1, etc. devices) added detection of NVMe M.2 SSDs with USB-NVMe adapters based on ASMEDIA ASM236x and JMicron JMS583 chipsets added detection of SAS hard disk drives and SSDs configured as RAID with LSI, Intel, Dell SAS RAID controllers added support for new hard disk and SSD models, identify self-monitoring status of Kingston, Intel, Samsung, KingDian, Sandisk, LiteOn, ADATA, Crucial, Corsair, Lenovo, Apacer, WD SSDs added/improved support of various Western Digital, Hitachi, Seagate, Toshiba hard disk drives added/improved support of Helium (He) filled hard disk drives added/improved support of numerous external USB adapters, USB-ATA bridges, docking stations fixed bug with empty memory card readers

0.17

30/8/2017

added detection of industrial micro SD cards under Linux. Detect status immediately if the detection method of the micro SD card previously configured under the Windows — or if -autosd command line parameter specified to detect and save the detection method and use in all sub-sequent detections under Windows or Linux. Note: with Raspberry PI, it is not possible to detect internal memory card status, just status of card in external USB memory card reader. added support of ASMedia ASM1352R dual drive (RAID) enclosures: detection of complete status of both hard disks added -html command line option to save HTML format report (-html -r reportfile.html) added -mht command line option to save MHT format report (-mht -r reportfile.mht) added support of more than 26 drives, detection of additional drives when required added support for new hard disk and SSD models, identify self-monitoring status

0.16

13/9/2016

added support for Intel, IBM, LSI RAID controllers experimental support of JMicron external USB RAID boxes (contact for assistance) added support for 4000+ hard disk and SSD models, interpreting and displaying their self-monitoring status displaying lifetime writes for SSDs

0.08 — Download Hard Disk Sentinel Linux 0.08 version

6/3/2012

more hard disk drive / solid state disk details saved to report improved compatibility with USB hard disks and various disk controllers true 64 bit version released

0.03 — Download this version

21/7/2009

more hard disk drive / solid state disk details saved to report -aam and -setaam commands to modify acoustic level of disk drives -dump to dump report to stdout -solid option to create solid output for further processing improved power on time detection for Samsung, Maxtor, Toshiba, Fujitsu models improved detection of SCSI and USB drives detection of SCSI and USB drive capacities

0.02 — Download this version

25/7/2008

added support for SCSI and USB hard disks improved temperature detection on Fujitsu hard disks

0.01 — Download this version

29/4/2008

first initial version

Raspberry PI

NAS boxes with ARM CPU

The Linux version of Hard Disk Sentinel also available for NAS boxes built with ARM CPUs. The NAS box should have telnet / SSH access in order to download and use this tool.

To get Telnet / SSH access, special firmware version(s) or additional packages (like the fun_plug may be required. Putty tool is also required to connect the NAS box and access its console.

get Telnet / SSH access to the NAS box and log-in to your device by using putty.exe

enter wget http://www.hdsentinel.com/hdslin/armv5/hdsentinelarm to download the latest ARMv5 CPU build.
To simplify things, the file is not compressed.

enter chmod 755 hdsentinelarm to set the proper permission (executable). You may use chmod +x hdsentinelarm instead.

enter ./hdsentinelarm to start the Hard Disk Sentinel on the NAS and get hard disk status information.

Источник