Newbie

Цитата:

Аналогичная проблема у меня проявилась на 2-х машинах практически одновременно. Проблемы начались в середине июня. До этого несколько месяцев все работало.
Win 10 x64 1809 + v.8.3.0.54 Plus
Win 10 x64 1607 + v.8.4.0.60 Plus

Junior Member

Вот только я не понял что такое Колонка «Run»?
Что за красную линию она показывает?
Почему на скринах она еще и зеленая бывает, а у меня нет?

А еще не понял что за зона такая AllApps?
Походу зона для всех не настроенных приложений.
Ставлю в эту зону правило с ЛОГом — хочу посмотреть как все приложения ломятся в сеть.
Но ничего не видно.

Что за отдельная кнопка «Other Rules» и «LANs»?

На сайте про это ничего не написано.
Кароче муть..

Кто разобрался — напишите если не трудно.

Добавлено:
Снял галку в настройках «Disable logging of Allowed Apps»
Снял галки у программ «Disable logging of Allowed Events»

зеленые линии пошли!

Но только что они показывают?

скачал браузером 200 мб — но все равно у Svchost больше всего значений
походу измеряется не объем трафика, а количество попыток соединения

Галки «Protect System/Sibling applications» непонятно что делают
Что за зоны такие HostProcess. (NoUpdates) непонятно

Junior Member

И у меня тоже самое! Такое ощущение что оно где то прописало счетчик защиты от триала и тепеть таким образом заставляет купить.

Junior Member

у меня тоже наебнулся этот Фаервол
что делать будем?

Advanced Member

Мне пришлось такой батник сделать:
@echo off
taskkill /f /im windows10firewallcontrol.exe
net stop «Windows10FirewallService»
c:
cd «C:\Program Files\Windows10FirewallControl»
start Windows10FirewallControl.exe
exit

Newbie

Я перешел на TinyWall

Newbie

Я запретил ему выход в сеть с помощью брандмауэра Win 10. Использовал для его настройки TinyWall
Пока работает без проблем.

Full Member

Приветствую. Удалось победить?
Так же стоял SimpleWall и теперь не появляются всплывающие запросы

Ru-Board Member

Цитата:

Взял версию из варезной шапки:

1) Это не надстройка над WF т.к. сабж совершенно не взаимодействует с правилами WF;

2) В правилах для приложения нельзя рулить протоколами, портами, ипами — только через «зоны» (навертели какие-то зоны, а базового функционала нет);

3) Ок, «Зоны» — в целом понятно и нужно, но — почему только шесть протоколов? В WFC и то больше (хотя тоже обрезанный функционал по сравнению с WF);

4) Лог странный, но зато есть вкладка Connections

Sphinx windows firewall что это

We’re community supported and proud of it!

MS-DEFCON 2 :

Sphinx Windows Firewall Control

A guest post from Noel Carboni:

Firewall software is responsible for blocking or allowing network communications.

A lot of folks who care about security and privacy visit AskWoody.com, so I want to let everyone here know about a good piece of 3rd party firewall software that’s just been released: Sphinx Windows Firewall Control version 8

Essentially Sphinx Windows Firewall Control offers, for Win 7, 8, and 10 users, the practical ability to set up and manage a “deny outgoing connections by default” configuration.

The Sphinx Windows Firewall Control application works with the Microsoft-provided Windows Filtering Platform / Base Filtering Engine, where the “dirty work” of actually gating network connections is done. The filtering platform is a mature, working system component that has been around for a while now.

Out of the box, Windows of course provides the Windows Advanced Firewall, but in its default configuration it really doesn’t do much to enhance users’ privacy and security, since it allows all outgoing communications by default. That made some sense when we actually trusted the OS maker to have our backs. Now…

Think of the Sphinx Windows Firewall Control software package as a different, better, user interface for managing the firewall configuration on the PC, and in fact it CAN run alongside the Windows Advanced Firewall – there is no coupling between the two – though in practice you really want to just shut off the Windows Advanced Firewall and manage firewall operations entirely with the Sphinx software. Having both active would just lead to confusion.

But the really neat part – the thing that’s really special about this new version 8 release – is that the firewall configuration can now be managed using names, not addresses. That’s very significant. It changes the effort in setting up and maintaining a firewall configuration from impractical to almost trivial, given today’s networking that’s rich with server banks and content delivery networks (where a given host name can resolve to many different addresses).

It means, in layman’s terms, that if you want to allow site svc.anksvn.net to be contacted you just enter the name svc.anksvn.netinto a zone rule and you’re done. You don’t have to figure out that this name can resolve to any of multiple different network addresses and enter them all. And you don’t have to try to figure out when a new server at a different address is added or one of them is taken offline in the future.

I can’t stress enough how much managing the firewall configuration by name simplifies the setup and greatly reduces ongoing maintenance. It literally changes it from practically impossible to something that can be taken to a very detailed level and still kept up.

I personally am a control aficionado and have what some would call quite a pedantic setup, where EVERYTHING is controlled to the finest point. The Sphinx software sets up a workable default configuration, but I’ve developed my own configs completely from scratch. I’m quite willing to share them if it can be helpful to others to see what I’ve set up.

I have literally not had to make any changes to my Sphinx firewall configuration in weeks. It really is possible to develop a practically “set it and forget it” configuration that lets you do normal things without exposing you to new threats. Some observations, after using this software for quite a while:

• Seeing what Windows tries to contact in the Events pane of this software gives one a warm feeling of knowing what’s happening on your system. Logging can be managed by application – meaning you can, for example, log everything your services do online but suppress logging of sites you visit with your browser. There’s a UI panel for the events (that you can, for example, clear or filter for certain things), and there’s a bona fide geek level log put in a file as well.
• It offers complex-enough configuration capabilities to set up most of the system to run in a deny-by-default mode, yet some applications (e.g., your browser or Skype) can be set to allow-by-default – with exceptions to both of course. So, for example, no newly installed program will be allowed to contact online servers until you add a rule to allow it, and conversely your browser can contact previously unvisited websites without any pop-up, yet still be blocked from contacting certain bad ones.
  
• New / unexpected attempts to make network connections are blocked with a pop-up that has a “horror movie” violin sound effect (which you can change if you like), at which point you can choose to either allow future such attempts or continue to deny them. What this means is that once you’ve got things initially set up, ongoing maintenance because of changes e.g., installing new software is essentially reactionary. In this day and age, knowing communications you have NOT allowed ahead of time will NOT succeed is comforting. This software has your back.
• There is a rich configuration interface. A change, for example, to allow or disallow Windows Updates is trivial for me. I just change the zone assigned to the Host Process for Windows Services (svchost) and it’s done. Thus no update will occur unless I specifically set the system up to do it.

• Through the Domain Names tab you can set up a list of security servers that are always allowed system-wide (e.g., machines serving the ocsp protocol that your system contacts when verifying code signing certificates, etc.). You can also set up a list of servers that are never allowed system-wide.
  

• Getting an indication of when an unapproved connection is attempted, by what application, and to what server, is very valuable in learning what needs to be reconfigured or tweaked via registry settings to make a system more private. Do that for a while and you end up with a Windows system that doesn’t even try to spill the beans.
• No matter what rules a software installer (e.g., a telemetry update) might try to add to the Windows Advanced Firewall they don’t affect the Sphinx Windows Firewall Control configuration, so you’re still in complete charge of what is being allowed or denied.

I have been working closely with the author all through the beta testing period of the name-based software, and I have run the package through all kinds of harsh tests. He’s a smart, careful engineer who has been very responsive to feedback. As a result, the software really works. I use the Network/Cloud edition on all my systems.

I am not associated commercially with this product in any way. The only connection I have is that I have been a beta tester all through the development of version 8 and some time before that.

Вам также может понравиться

Windows или Linux: Что лучше выбрать?

Есть много причин выбирать между Windows и Linux, но

Файл владелец изменить linux

Команда Chown в Linux Chown Command in Linux (File

Установка шлюза по умолчанию linux

Настройка сети вручную Содержание Краткое описание

Чем разбить диск для linux

ИТ База знаний Курс по Asterisk Полезно — Узнать IP —