How do I stop windows update drivers install loop?

I have an Windows Update error: «A current driver on your PC may be better than the driver we’re trying to install. We’ll keep trying to install.»

I don’t understand the logic behind the «We’ll keep trying to install» as long as the current driver is better, but how could I stop it?

I have tried to set the «Device installation settings» to No, I have also tried to reset the Windows update catalog stopping the services and renaming C:\Windows\SoftwareDistribution to SoftwareDistribution.old but it keeps trying to install and failing the same HP driver:

«Installation Failure: Windows failed to install the following update with error 0x8024200B: Hewlett-Packard — USB — 6/1/2018 12:00:00 AM — 46.2.2631.18152.»

Is there a way to stop this loop?

Replies (1) 

I am Dave, an Independent Advisor, I will help you with this . . .

The best option is to hide that update, so Windows 10 stops trying to install the update, Microsoft provide a tool to hide that update, but the link does not seem to be working at the moment, it is returning a 404 error, you can download that Microsoft tool from the link below, MVP Shawn Brink provides that in the ‘Option One’ section on this page:

________________________________________________________
Standard Disclaimer: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

Power to the Developer!

MSI GV72 — 17.3″, i7-8750H (Hex Core), 32GB DDR4, 4GB GeForce GTX 1050 Ti, 256GB NVMe M2, 2TB HDD

Stop Windows Update Installing Drivers in Windows 10 [Solved]

Last Updated: 4 years ago

Windows update will install drivers automatically if it is enabled, and it possibly provides problem drivers. In this case, you may want to install drivers manually. Here you will learn how to stop Windows installing drivers automatically in Windows 10.

There are two methods you can use. Method 1 should work for most cases. If it doesn’t work on your case, try Method 2.

Method 1: Change Device Installation Settings

Follow these steps:

2. View by Small icons, click System.

3. In left pane, click Advanced system settings.

4. Go to Hardware tab. Under Device Installation Settings section, click on Device Installation Settings.

5. Select No. Then click on Save Changes.

Method 2: Change Group Policy Settings

Follow these steps:

1. Type gpedit.msc in the search box then select Edit group policy.

2. Navigate to Computer Configuration -> Administrative Templates -> System -> Device Installation -> Device Installation Restrictions.

3. In the right pane, right-click on Prevent Installation of Devices not described by other policy settings and select Edit.

4. Select Enabled and click OK button.

Note if you want to let Windows install some drivers automatically, remember to change back the settings.

To update drivers, you can download the latest drivers from manufacturers. And if you want to save more time, you can use Driver Easy to help you.

Driver Easy has Free version and PRO version. Click here to download the Free version for a trial. If you find it useful, upgrade to the PRO version. The PRO version allows you to update all drivers with just one click. And offers you free expert tech support guarantee and 30-day money back guarantee. Just contact us for further assistance if you meet any driver issue. And ask for a full refund if you are not satisfied with the product.

How to stop automatic updates on Windows 10

Source: Windows Central

On Windows 10, when new quality updates (also referred as cumulative updates) become available, they download and install automatically on your computer. Although the automatic approach ensures that every device receives security updates to patch vulnerabilities and performance as well as stability enhancements, it’s one of the most controversial features.

Typically, the biggest reason is that updates are known to contain bugs that can negatively affect the experience, and they require a restart to complete the installation that can disrrupt the current workflow.

If you’re always noticing problems as a direct result of updates, or you have a good reason to use a device unpatched, depending on your edition of Windows 10, you can stop automatic updates using the Windows Updates settings or permanently using Group Policy or Registry.

In this Windows 10 guide, we’ll walk you through the steps to block Windows Update from downloading and installing updates on your device automatically.

How to disable automatic updates using Settings

Usually, it’s not necessary to disable the Windows Update settings permanently. If you want to skip an update, you can pause updates until the day you want to apply them. Using the Settings app, you can stop system updates for up to 35 days on Windows 10 Pro or Home.

To disable automatic updates temporarily, use these steps:

1. Open Settings.
2. Click on Update & Security.
3. Click on Windows Update.

Click the Advanced options button.

Source: Windows Central

Under the «Pause updates» sections, use the drop-down menu and select how long to disable updates.

Source: Windows Central

Once you complete the steps, updates for Windows 10 will be completely disabled until the day you specified. When the device reaches the pause limit, you must install the latest updates available for the option to be available again.

You can always undo the changes with the same instructions outlined above, but on step No. 5, choose the Select date option. Another way to perform the same task is to click the Resume updates button on the Windows Update page.

In the past, the «Advanced options» page also included options to defer security and feature updates, but these options are no longer available with the latest version of Windows 10.

How to disable automatic updates using Group Policy

On Windows 10 Pro, the Local Group Policy Editor allows you to disable automatic updates permanently, or you can change the Windows Update policies to decide when updates should install on the device.

Disable updates

To disable automatic updates on Windows 10 permanently, use these steps:

1. Open Start.
2. Search for gpedit.msc and click the top result to launch the Local Group Policy Editor.

Navigate to the following path:

Computer Configuration > Administrative Templates > Windows Components > Windows Update

Double-click the Configure Automatic Updates policy on the right side.

Source: Windows Central

Check the Disabled option to turn off the policy and disable automatic updates permanently.

Source: Windows Central

Click the Apply button.

Click the OK button.

After you complete the steps, Windows 10 will stop downloading updates automatically on the device. However, the ability to check for updates manually will continue to be available in Settings > Update & Security > Windows Update. While on the page, you need to click the Check for updates button to download and install the most recent patches.

If you want to re-enable automatic updates on the device, you can use the same instructions outlined above, but on step No. 5, make sure to select the Not Configured option.

Limit updates

Alternatively, you can customize the policy to decide how you want to disable automatic updates using the Local Group Policy Editor.

To manage Windows Update automatic downloads with Group Policy, use these steps:

1. Open Start.
2. Search for gpedit.msc and select the top result to launch the experience.

Navigate to the following path:

Computer Configuration > Administrative Templates > Windows Components > Windows Update

Double-click the Configure Automatic Updates policy on the right side.

Source: Windows Central

Check the Enable option to turn on the policy.

Source: Windows Central

Under the «Options» section, select the best settings to prevent updates from downloading and installing automatically on Windows 10:

• 2 — Notify for download and auto install.
• 3 — Auto download and notify for install.
• 4 — Auto download and schedule the install.
• 5 — Allow local admin to choose setting.
• 7 — Auto Download, Notify to install, Notify to Restart.

Quick tip: The closest option to disable automatic updates is the 2 — Notify for download and auto install option, but you can select any other option that best fits your situation. If you choose option number 2, updates won’t download or install automatically. Instead, in the Windows Update settings page, you’ll now see an «Install now» button that you need to click manually to get the improvements.

Source: Windows Central

Click the Apply button.

Click the OK button.

Once you complete the steps, automatic updates will be permanently disabled on Windows 10. However, when a new patch becomes available for the system, you’ll be able to install it manually from the Windows Update settings page.

How to disable automatic updates using Registry

On Windows 10 Pro, you can also disable automatic updates using the Registry in at least two different ways.

Warning: This is a friendly reminder that editing the Registry is risky and can cause irreversible damage to your installation if you don’t do it correctly. It’s recommended to make a full backup of your PC before proceeding.

Disable updates

To disable Windows 10 update permanently modifying the Registry, use these steps:

1. Open Start.
2. Search for regedit and click the top result to launch the Registry Editor.

Navigate to the following path:

Right-click the Windows (folder) key, select the New submenu, and then choose the Key option.

Source: Windows Central

Right-click the newly created key, select the New submenu, and choose the Key option.

Source: Windows Central

Right-click the AU key, select the New submenu, and choose the DWORD (32-bit) Value option.

Source: Windows Central

Double-click the newly created key and change its value from 0 to 1.

Source: Windows Central

Click the OK button.

Restart your computer.

After you complete the steps, Windows Update will no longer install monthly updates automatically on Windows 10. However, similar to using the Local Group Policy Editor, you’ll still be able to download and install updates as needed by clicking the Check for updates button in the Windows Update settings.

Limit updates

It’s also possible to use the Registry to configure how updates are delivered for Windows 10 to prevent automatic installs.

To customize Windows Update settings to block updates with the Registry, use these steps:

1. Open Start.
2. Search for regedit and click the top result to open the Registry Editor.

Navigate to the following path:

Right-click the Windows (folder) key, select the New submenu, and choose the Key option.

Source: Windows Central

Right-click the newly created key, select the New submenu, and choose the Key option.

Source: Windows Central

Right-click the AU key, select the New submenu, and select the DWORD (32-bit) Value option.

Source: Windows Central

Double-click the newly created key and change its value (number only) to:

• 2 — Notify for download and auto install.
• 3 — Auto download and notify for install.
• 4 — Auto download and schedule the install.
• 5 — Allow local admin to choose settings.
• 7 — Auto Download, Notify to install, Notify to Restart.

These options work identically to the Group Policy settings, and number 2 is the closest option to disable Windows Update on Windows 10 permanently on your computer.

Source: Windows Central

Click the OK button.

Restart your computer.

Once you complete the steps, Windows 10 will stop installing updates automatically. However, you’ll receive notifications when new updates are available, allowing you to install them manually.

You can always use the same instructions to restore the original settings, but on step No. 4, right-click the WindowsUpdate key, select the Delete option then reboot the device to complete applying the settings.

On Windows 10, like in any other platform, updates are essential to improve the experience, and they’re critical to keeping your computer and data safe against malicious attacks and malware.

Typically, it’s never a good idea to continue using a device without the latest patches, but there are some situations when disabling updates might be appropriate. For instance, if you want to have complete control when applying updates. You want to minimize the chances of running into problems due to bugs with cumulative updates. Or you’re working with critical software and equipment that may stop working if updates are installed.

More Windows 10 resources

For more helpful articles, coverage, and answers to common questions about Windows 10, visit the following resources:

Halo: MCC’s live service elements make it better, not worse

Halo: The Master Chief Collection is more popular than ever, but some fans don’t agree with the live service approach 343 Industries has taken with it. Here’s why those elements are, at the end of the day, great for the game and for Halo overall.

Microsoft’s Surface Duo is not ‘failing up’

Microsoft announced this week that it was expanding Surface Duo availability to nine new commercial markets. While Surface Duo is undoubtedly a work in progress, this is not a sign of a disaster. It’s also doesn’t mean that Surface Duo is selling a ton either. Instead, the reason for the expansion is a lot more straightforward.

Here’s what you can do if Windows 10 update KB5001330 is causing issues

In this guide, we’ll show you the steps to get rid of the update KB5001330 to fix profile, gaming, and BSoD problems with the Windows 10 October 2020 Update and May 2020 Update.

These are the best PC sticks when you’re on the move

Instant computer — just add a screen. That’s the general idea behind the ultra-portable PC, but it can be hard to know which one you want. Relax, we have you covered!