Stop Windows Update service

This post explains how to stop Windows update service from command line(CMD). Make sure that you open elevated administrator command prompt to execute this command.

How to stop Windows update service

Do the following

1. Open elevated command prompt
2. Run the below command.

Update service restarts automatically

It’s observed that just stopping the service does not work in some cases and it restarts automatically. In such cases one can disable the service completely by running below command.

Note that these commands to stop or disable service should be run from elevated administrator command prompt. Other wise you will get the following error.

How to start windows update

Neat tip. However, it seems W7 is automatically restarting the Windows Update service every now and then. I’ve changed status to “Manual” under services.msc but the behavior remains. No fun at all.

Hi Carl
FYI everytime you go into windows update it will start the service even though it is set to manual so if you need to look in windows update then stop the service again afterwards.

Run CMD as Admin and “sc config wuauserv start= disabled” will work on Win7Ulti

Please help me to stop the windows update, it is a disaster every time after windows update, totally stupid program, may be next time I should go for apple.

you gott the error because you have’nt run cmd as administrator

Apple is more stupid than the windows.

I cannot get windows update to stop, finish, or go away! How do I get this to stop so I can get back on the computer? It’s a brand new computer, and useless at this point!

Set to disabled and reboot!

Wow thank you for putting this line up here. I needed to restart my windows update and this did the trick

Yes – agreed thanks much appreciated! On a very slow connection so bandwidth is at a premium. This made things much more pleasant.

#Persistent
interval = 600 ; execution interval in seconds
Menu, Tray, Add ; divider line
Menu, Tray, Add, Execute Now, StopService
Menu, Tray, Default, Execute Now
timer_param := -1000 * interval

StopService:
Run %comspec% /c “sc query wuauserv | find “1 STOPPED” & if errorlevel 1 sc stop wuauserv”, , Hide
time = %A_Now%
time += %interval%, seconds
FormatTime, time_string, %time%, Time
Menu, Tray, Tip, Stop Windows Update Service`nNext Execution at %time_string%
SetTimer, StopService, %timer_param%
return

Hi! even thou i star cmd as admin i still get the “error 5 access denied. can someone help me?

go to start menu —> type “cmd” in the search box, wait till cmd shows in the results list, right click on “cmd” and select “run as administrator”

You need to run it from elevated command prompt.

otherwise, check your UAC and if it’s off, turn it on in your account settings.

This information is for those who wish to completely disable Windows 10 automatic updates. It is very simple and requires no real expertise.

1. Bring up your task manager.
2. Select the “Services” tab.
3. Scroll down the lefthand side until you see “wuauserv”. (In the description column to the right, you’ll see “Windows Update”.)
4. Right click on “wuauserv”.
5. In the dropdown box that appears, click on “stop”.

This stops all automatic updates from taking over your computer. In order to get future updates, you will have to follow the same steps, but click on “start” to restart it. I prefer simply to go to Microsoft’s website to find the updates, if I want them at all, which I don’t. I’ve struggled with Microsoft’s updates for years, from Windows 7, Windows 8, Windows 8.1, and now Windows 10. All of them have rendered my computer(s) less functional than they were prior to the updates.

I use a separate security program in conjunction with Windows firewall and find that there is absolutely no need to upload their security updates.

hi, I am having endless problems with my surface pro3, running win10pro. the overwhelming majority of my time spent on this device is occupied by trying to update and keep in functioning without sending me endless notifications. I am an aspiring Linux user, which so far as I can tell, is superior in every way, however, I am concerned if the security is dependable…? I was wondering what the security program is that you referenced? and would be eager to hear any other suggestions/tips/opinions?

I tried this and got a message that access is denied.

Same problem on my PC. Svchost.exe takes continuously almost 100% processor time.
Stopped wuauserv in the way described above and the processor is free. However after a restart it is running again. Same after stopping it via the command: net stop wuauserv.
Anybody knows how I can stop this wuauserv forever.

You need to disable the service using sc command. Added these commands in the post.

Hi all, a tip for all of those having issues with Windows update, if you go to services.msc and stop the service in the second tab you can select a user to run the service with afterwards.
So you only need to put a valid user and then change the password of that user and voila! it wont ever be able to run again since it will be trying to run with an invalid user… 🙂

I wind up stopping and disabling this service every day or two, yet somehow Windows keeps turning it back to Automatic and running it! (on an older laptop which has to stay at XP)

Just want to say Thank YOU! I got nearly crazy (even more than normal) because my laptop was making so much noise while windows was checking updates for hours. Tried to close it through task manager to no avail but this tip worked as a charm.
I had no problems at all that was until windows installed updates and I could not get into windows anymore. Thanks no thanks. So now I am going to try to see if I can download the updates one by one or so. Thanks again. Love the sound of silence

Surely it would be much easier to use computer management services scroll down to windows update and apply the above directly with the advantage that you can see what you are actually doing.

Thanks for the tip. CPU had been running crazy trying to keep up with the update service. The CPU temp has dropped from 43 degrees Celcius to 35 degrees.

Omg! Thanks you! I was stuck in windows update hell!

Thanks for the info. I made a .bat file to stop, and one to start with this info. Just run as administrator and it works 🙂

I hope the above stop up dates work as my computer is all bet useless

from cmd run
sc queryex wuauserv
take pidnum from result and replace xxx in
taskkill /PID xxx/F and run

This is a good short term (few days) fix but on Windows 10 home edition, update restarts itself after a few days. There is a regedit out there but it doesn’t work for Home edition. The WUSH tool also only works for a few days.

Would be great if there were a way to program this “sc config wuauserv start= disabled” command to re-run itself every 2 days. Does anyone know how to do this?

Just put the command in a batch file, then schedule a task launching it with highest priviledge “when the computer starts”. (^v^)

i am running cmd as administrator but also the following cmd net stop wuauserv is saying invalid what to do then

Erm… I disabled the command using the command prompt (admin), but the file Windows10Upgrade keeps appearing. Help me please!

I can’t stop windows 10 update using service stopping, when I connect to wifi ,service is auto enable how can I stop permanently

Is there any command just to show the windows update is on or off ?

How can I disable windows updates for all the computers on the network?

Unfortunately, Windows 10 Home does not allow users to turn off automatic updates. To do that, you would have to upgrade to the Pro version. Otherwise, you’re looking at a lot of punishing hours spent rolling back updates you didn’t want… I had this issue with an error related to a registry conflict that prioritizes RuntimeBroker and found that this was the case during my research into the cause for the ongoing rollbacks.

I have no access to stop and disable the services. Can anyone tell me what to do in this case?

Hello, I am searching across the internet to find a solution to fix the svchost.exe disk usage, and almost every one of them suggests to disable or turn manual the Windows Update Service. I already did that, but the svchost.exe thing keeps consuming my disk.

If you know how to fix this, please tell me.

Can always services >Windows update
right click, properties, Revoery, and change to no action for all 3… see if that may help.

Thanks, had to get around an invasive group policy to repair bitlocker bde protectors, this was the trick I needed to disable updates so my bitlocker tables could be repaired.
Brent, New Zealand

Windows update stuck in ‘Stopping’ state

I would like to have more information about this issue. You have mentioned that the Windows Update issue had started recently, so, what are the recent changes that you have made to the computer prior to the issue that you had initially with Windows Update. Also please answer to these questions:

1) Do you get any error message/code when you try to launch Windows Update? If yes, what is it?

2) Do you have any third party security program installed on the computer?

You have also mentioned that the support engineer from Microsoft who was working on your computer, stopped the command line tool which scanned for the corrupted system files, in between. From this description, I think he was performing an SFC Scan and after which you are unable to launch Windows Update to check and run the pending updates. It also shows in “Services” console and in “Task Manager” that the windows update service has stopped. So, let us first reset the Windows Update Components and check if the resolves the issue.

Method 1: Manually Reset Windows Update Components

a) Press “Windows Logo” + “X” keys on the keyboard and then select “Command Prompt (Admin) ” from the menu.

b) Copy the following commands and then right click in the Command Prompt window and select “Paste ” to paste all the commands in it.

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

ren C:\Windows\System32\catroot2 catroot2.old

net start msiserver

c) Please wait for the process to complete and then press “Enter”.

d) Type “Exit ” in the Command Prompt to close it.

Now, run the Windows Update and check if it installs all the pending updates. There are also possibilities that something might have happened when the SFC Scan was stopped in between while it was repairing/recovering the corrupted system files. So, let’s try that again and check the result. You may need to use the Windows 8 installation disk for the SFC Scan to recover the corrupted system files.

Method 2: Run an SFC Scan

The sfc /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.

a) Press “Windows Logo” + “X” keys on the keyboard and select “Command Prompt (Admin) ” from that menu.

b) On the command prompt window, type the following command, and then press “Enter”

c) Follow the on-screen instructions and complete the scan.

Important: It may ask for windows installation DVD to fix and to enable SFC to make more than minor repairs. Some files saved on your computer might get deleted when fixing corrupted files.

Now, run the Windows Updates and check if that resolves the issue. Please do get back to us with the results. If the issue persists, we’ll be glad to assist you further.

53 people found this reply helpful

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

Stop Windows Update from Restarting my Computer

I just lost oh I don’t know, umm hours of work again. This has to be the 100th time in my life that my computer decides to restart without asking me and I lost a ton of open working files!

It’s hilarious because if I try to turn off my pc with programs open it won’t let me. But an update can wipe out whatever you want!@. @

How do I stop this from happening? And if you can’t tell by the millions of also po’d people that we want this as a feature@@. what is wrong is software engineers>>>.

I know Microsoft won’t be of any help whatsoever so can someone please tell me how to hack their code in the registry please?/////. The usual fix.

Replies (2) 

Looks like you haven’t heard about Active Hours, but fear not! I will explain:

Active Hours is a continuous period of time — up to 18 hours — when Windows 10 will not restart to finish installing an update. You can set your Active Hours at Start > Settings > Update & Security > Windows Update > Change active hours

Windows 10 has never restarted during my Active Hours (which are from 7am to 1am.)

Now, let’s say that your Active Hours are over, but you’re still actively using your computer (e.g., scrolling the mouse, typing on your keyboard) and Windows wants to restart to finish installing an update. In that case, Windows will prompt you with a quite noticeable pop-up in the notification area of your Taskbar. Windows will ask if it’s okay to restart, and if it’s not okay, you can tell Windows what time it can restart.

I’ve been prompted in this manner several times (because I basically don’t sleep) and Windows has always obeyed me.

Was this reply helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

Hello, how are you?
Welcome to the Microsoft community!

My name is Paloma B., I’m an independent advisor, I’m here to help you in the best possible way.

I understand that you would not want the computer to restart after the Windows automatic update.

Please perform the configuration below to make this happen.

Windows Update:
1. Press the keys simultaneously «Windows + R», then «Run» will open. Type in the blank field «regedit» (without quotes) and press Enter .
2. Locate and click the following registry key:
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU
3. Add any of the following settings:
Value name: NoAutoRebootWithLoggedOnUsers.
Value data: 0 to 1

Note: If you do not have this key, you must manually create this registry key.

1. Press the right mouse button on any blank area of ​​the Registry Editor;
2. Select New > DWORD Value (32 Bits);
3. Use the same data above:
Value name: NoAutoRebootWithLoggedOnUsers.
Value data: 1

Restart the computer.

This way whenever there is an automatic update you will be informed, so it will only be done when you manually restart.

If these procedures helped you in any way, please click on «I solved my problem» and also mark as an answer, so you can help others users.

We will always be available for whatever you need!