Best 5 Free Tricks to Speed Up Windows Boot/Start Time [2020]

Windows boot up slow, startup time lasting very long every day

«Do you know how to speed up the computer’s boot time after using for a long time? I have a Dell laptop which is installed with the latest Windows 10 April 2018 update now.В
Everything works so great with this laptop. But the computer becomes slower and slower in booting up Windows system. Recently, my laptop becomes extremely slow in startup after installing the latest Windows 10 update. I tried to find solutions online, and found out that there are quite a big number of Windows users are having the same problem.
And the methods online are too complex for me to follow, testing which one can help with this problem is also time-consuming. I need a straightforward and free method for helping me fix this issue. Help me please if you happen to know the solution. Thank you.«

Are you experiencing computer slow boot issue on Windows 10, 8, 7 and even older Windows OS? Usually, when Windows computers become slow in the startup, the PC’s working efficiency sometimes will somehow also get affected. So what will you do to resolve the Windows slow boot issue on Windows 10/8/7? Here in the below, you’ll find 5 free tricks collected by EaseUS software, and you can follow any one of them to speed up the Windows computer boot time without losing any data on your own now:

5 Free Tricks to Speed Up Windows Boot or Start Time

Step 2. Select the type of junk files you want to scan and click «Analyze».

Step 3. Identify and select useless files and click «Clean up» to remove those files from your PC or laptop.

Method 4. Adjust Windows for best performance

To adjust Windows for its best performance may also help to decrease the Windows boot time at some extend. Here are the detail steps and you can follow to give it a try:

1. Type: Control Panel in the Search box. And open Control Panel, select System.

2. Click Advanced system settings and go to Advanced tab, click on Settings. under Performance column.

3. Check Adjust for Best Performance and click OK to confirm.

Method 5. Shorten the Boot Menu Timeout

1. Type: Control Panel in the Search box and open Control Panel, select System.

2. Click Advanced system settings and click Settings under Startup and Recovery.

3. Check Time to display a list of operating systems: 30 — 1 seconds and you can elect to reduce the time. Then click OK to confirm.

After this, you can just restart your PC, and you’ll get a faster start time of your Windows PC.В

System startup time windows

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

According to the event log, when Windows 7 starts up, the «Windows Time» service starts, then stops. In between is the event log entry below.

There are no other events similar to this; «Windows Time» is the only service affected. This has happened four restarts in a row. Any ideas what’s going on? Thanks.

Answers

I suggest you run the following command to remove the trigger events, change the startup type of the Windows Time service from Manual to Automatic:

sc triggerinfo w32time delete

Or, run the following command defines the trigger event for your environment.

sc triggerinfo w32time start/networkon stop/networkoff

Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

All replies

According to the event log, when Windows 7 starts up, the «Windows Time» service starts, then stops. In between is the event log entry below.

There are no other events similar to this; «Windows Time» is the only service affected. This has happened four restarts in a row. Any ideas what’s going on? Thanks.

Actually, after checking the event log more thoroughly, I see this has happened upon every restart since I installed Win7 (on 7/29). Which service was affected changed. Here are the first four instances of 0x40030011; they from the first four startups after installation.

And if I configure W32Time for delayed startup, I get

The TCP/IP NetBIOS Helper service was successfully sent a stop control.
The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)]
Comment: None

Unlike W32Time, NetBiosHelper restarts immediately after it stops.

I have found plenty of queries about 0x40030011(various services) but no solution.

I suggest you run the following command to remove the trigger events, change the startup type of the Windows Time service from Manual to Automatic:

sc triggerinfo w32time delete

Or, run the following command defines the trigger event for your environment.

sc triggerinfo w32time start/networkon stop/networkoff

Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I suggest you run the following command to remove the trigger events, change the startup type of the Windows Time service from Manual to Automatic:

sc triggerinfo w32time delete

Or, run the following command defines the trigger event for your environment.

sc triggerinfo w32time start/networkon stop/networkoff

Thanks, Alex. I’ll try that next time I restart. That might be after quite a while since I want to give W32Time a chance to zero in on some consistent behavior.

Now, W32Time has two (start/stop) triggers of type 3 (domain join/leave). Those don’t seem particularly appropriate since I’m not in a domain. Having read the MSDN docs on service triggers I’m comfortable monkeying with them.

Off topic: Does anyone know what’s the ideal behavior of W32Time after it has zeroed in on some consistent behavior? Left alone, my PC would lose about 2 sec per day and W32Time is set to sync once a day. What should I expect to see (ideally) if I monitored, for a day, my computer’s time offset and the SystemTimeAdjustment?

How to See PC Startup And Shutdown History in Windows 10

There are times when a user wants to know the startup and shutdown history of a computer. Mostly, system administrators need to know about the history for troubleshooting purposes. If multiple people use the computer, it may be a good security measure to check PC startup and shutdown times to make sure the PC is being used legitimately. In this article we will discuss two ways to keep track of your PC shutdown and startup times.

Using event logs to extract startup and shutdown times

Windows Event Viewer is a wonderful tool which saves all kinds of stuff that is happening in the computer. During each event, the event viewer logs an entry. The event viewer is handled by eventlog service that cannot be stopped or disabled manually, as it is a Windows core service. The event viewer also logs the start and stop times of the eventlog service. We can make use of those times to get an idea of when our computer was started or shut down.

The eventlog service events are logged with two event codes. The event ID 6005 indicates that the eventlog service was started, and the event ID 6009 indicates that the eventlog services were stopped. Let’s go through the complete process of extracting this information from the event viewer.

1. Open Event Viewer (press Win + R and type eventvwr ).

2. In the left pane, open Windows Logs -> System.

3. In the middle pane you will get a list of events that occurred while Windows was running. Our concern is to see only three events. Let’s first sort the event log with Event ID. Click on the Event ID label to sort the data with respect to the Event ID column.

4. If your event log is huge, then the sorting will not work. You can also create a filter from the actions pane on the right side. Just click on “Filter current log.”

5. Type 6005, 6006 in the Event IDs field labeled as . You can also specify the time period under Logged.

• Event ID 6005 will be labeled as “The event log service was started.” This is synonymous with system startup.
• Event ID 6006 will be labeled as “The event log service was stopped.” This is synonymous with system shutdown.

If you want to investigate the Event log further, you can go through the Event ID 6013 which will display the uptime of the computer, and Event ID 6009 indicates the processor information detected during boot time. Event ID 6008 will let you know that the system started after it was not shut down properly.

Using TurnedOnTimesView

TurnedOnTimesView is a simple, portable tool for analyzing the event log for startup and shutdown times. The utility can be used to view the list of shutdown and startup times of local computers or any remote computer connected to the network. Since it is a portable tool, you will only need to unzip and execute the TurnedOnTimesView.exe file. It will immediately list the startup time, shutdown time, duration of uptime between each startup and shutdown, shutdown reason and shutdown code.

Shutdown reason is usually associated with Windows Server machines where we have to give a reason if we are shutting down the server.

To view the startup and shutdown times of a remote computer, go to “Options -> Advanced Options” and select “Data source as Remote Computer.” Specify the IP address or name of the computer in the Computer Name field and Press the OK button. Now the list will show the details of the remote computer.

While you can always use the event viewer for detailed analysis of startup and shutdown times, TurnedOnTimesView serves the purpose with a very simple interface and to-the-point data. For what purpose do you monitor the startup and shutdown times of your computer? Which method do you prefer for monitoring?

Content Manager at Make Tech Easier. Enjoys Android, Windows, and tinkering with retro console emulation to breaking point.

Free software to measure Boot or Startup Time in Windows 10

Over a period of time, you install several programs on your Windows computer. Many of these programs add entries to the startup items and add Services to Windows, which need to start when Windows starts. This results in the slowing down of your Windows PC, in terms of boot times as well as performance, because too many programs want to run.

You can use the built-in MSConfig Utility, or some nice freeware like WinPatrol or CCleaner, to remove, disable, or manage your startup programs. But if you need to measure the boot time or the time your Windows 10/8/7 takes to start up, you will need to use Windows Assessment and Deployment Toolkit, or you can check out some of these free software that let you do so easily.

Measure Startup or Boot Time in Windows 10

We will take a look at the following free software that will help you measure the boot or stauptime in Windows 10/8/7:

1. Windows Boot Timer
2. BootRacer
3. AppTimer
4. Soluto
5. MaaS360 Boot Analyze.

Windows Boot Timer loads itself into memory when you start your computer and measures total system boot time. After all system processes have loaded, the utility removes itself from the system memory and displays the total boot time. No installation is required. All you need to do is double-click on the executable & upon restart; it will display the time taken by your computer to load windows. It does not count the time taken to go through BIOS or BIOS boot up a password.

BootRacer will let you measure the time required for your Windows computer to boot. The main function of BootRacer is total control over Windows boot time.

3] AppTimer

AppTimer is a freeware that will run an executable, a pre-set number of times and then measure the time it takes to start-up each time. It measures the time up to the state where user input is being accepted before exiting the application. After each run AppTimer will close the application in an automated fashion, before restarting it again.

4] Soluto

Soluto will not only measure your boot time but also help you optimize boot time further. It employs innovative low-level Windows kernel technologies to identify what users are asking their PC to do, and what their PC does in return. It can delay the loading of programs or services that aren’t necessary when the computer is booting and readying itself for use. This way, such programs and services are launched a little later, thus making your computer that much earlier and ready for you to use.

3] Boot Analyzer

MaaS360 Boot Analyzer will give you detailed information s about the boot activity of your computer. It has a clean and easy-to-understand interface. The main window displays a graph with details about the date and time when the boot mode was enabled. While measuring boot times, it lets you mention the number of boots. It also maintains a history of your previous boot times. Go get it here.