Усовершенствования для System Update Readiness Tool в Windows 7 и Windows Server 2008 R2

О System Update Readiness Tool

System Update Readiness Tool может устранить проблемы, которые могут помешать установку обновлений Windows и пакетов обновления. Дополнительные сведения и инструкции для загрузки этого средства см. .

Сведения об этом обновлении

Это обновление совершенствует развертывание и удобство технического обслуживания средства проверки готовности системы к обновлению (System Update Readiness Tool) для Windows 7 и Windows Server 2008 R2. Он также предоставляет следующие новые возможности для инструмента:

Возможность развертывания System Update Readiness Tool через параметры командной строки DISM .

Возможность административно развертывать последние манифест, mum и других полезные файлы без необходимости загрузки всего пакета каждый раз когда создается новый выпуск. MUM, MANIFEST и другие файлы полезных данных очень важны для поддержания состояния обновленных компонентов.

Возможность создания и настройки задания, выполняет программу без вмешательства пользователя.

Канал регистрации событий создается для подсистемы средства проверки готовности системы к обновлению для обеспечения обратной связи для администратора.

Сведения об обновлении

Как получить это обновление

Центр обновления Windows

Это обновление доступно в .

Центр загрузки Майкрософт

Следующие файлы доступны для скачивания из Центра загрузки Майкрософт:

Improvements for the System Update Readiness Tool in Windows 7 and Windows Server 2008 R2

About the System Update Readiness Tool

The System Update Readiness Tool can help fix problems that might prevent Windows updates and service packs from installing. For more information and how to download the tool, see What is the System Update Readiness Tool.

About this update

This update improves the deployment and serviceability of the System Update Readiness Tool for Windows 7 and Windows Server 2008 R2. It also provides the following new features for the tool:

Ability to deploy the System Update Readiness Tool through the DISM command-line options.

Ability to administratively deploy the latest manifest, mum, and other payload files without the need for downloading the whole package every time that a new release is created. MUM, MANIFEST, and other payload files are very important to maintaining the state of updated components.

Ability to create or configure a scheduled task that executes the tool without user interaction.

Event logging channel is created for the System Update Readiness engine to provide feedback to an administrator.

Update information

How to obtain this update

Windows Update

This update is available from Windows Update.

Microsoft Download Center

The following files are available for download from the Microsoft Download Center:

All supported x86-based versions of Windows 7

Download the package now.

All supported x64-based versions of Windows 7

Download the package now.

All supported x64-based versions of Windows Server 2008 R2

Download the package now.

All supported IA-64-based versions of Windows Server 2008 R2

Download the package now.

For more information about how to download Microsoft support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to obtain Microsoft support files from online services Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help prevent any unauthorized changes to the file.

Prerequisites

There is no prerequisite to apply this update.

Registry information

To apply this update, you do not have to make any changes to the registry.

Restart requirement

You have to restart the computer after you apply this update.

Update replacement information

This update does not replace a previously released update.

The global version of this update installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.

Windows 7 and Windows Server 2008 R2 file information notes

The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:

Fix Windows Update errors by using the DISM or System Update Readiness tool

Original product version: В Windows 10, version 1809 and later versions, Windows 8.1, Windows Server 2012 R2, Windows 7 Service Pack 1, Windows Server 2008 R2 Service Pack 1
Original KB number: В 947821

Symptom

Windows updates and service packs may fail to install if there are corruption errors. For example, an update might not install if a system file is damaged. The DISM or System Update Readiness tool may help you to fix some Windows corruption errors.

This article is intended for Support agents and IT professionals. If you are home users and looking for more information about fixing Windows update errors, see Fix Windows Update errors.

Resolution for Windows 8.1, Windows 10 and Windows Server 2012 R2

To resolve this problem, use the inbox Deployment Image Servicing and Management (DISM) tool. Then, install the Windows update or service pack again.

Open an elevated command prompt. To do this, open Start menu or Start screen, type Command Prompt, right-select Command Prompt, and then select Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or select Allow.

Type the following command, and then press Enter. It may take several minutes for the command operation to be completed.

When you run this command, DISM uses Windows Update to provide the files that are required to fix corruptions. However, if your Windows Update client is already broken, use a running Windows installation as the repair source, or use a Windows side-by-side folder from a network share or from a removable media, such as the Windows DVD, as the source of the files. To do this, run the following command instead:

Replace the C:\RepairSource\Windows placeholder with the location of your repair source. For more information about using the DISM tool to repair Windows, reference Repair a Windows Image.

Type the sfc /scannow command and press Enter. It may take several minutes for the command operation to be completed.

Close the command prompt, and then run Windows Update again.

DISM creates a log file (%windir%/Logs/CBS/CBS.log) that captures any issues that the tool found or fixed. %windir% is the folder in which Windows is installed. For example, the %windir% folder is C:\Windows.

Resolution for Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1

To resolve this problem, use the System Update Readiness tool. Then, install the Windows update or service pack again.

Download the System Update Readiness tool.

select the download link in the following table that corresponds to the version of Windows that is running on your computer. For more information about how to find the version of Windows that you installed, see Find out if your computer is running the 32-bit or 64-bit version of Windows.

This tool is updated regularly, we recommend that you always download the latest version. This tool is not available in every supported language. Check the link below to see if it is available in your language.

Operating system	Download link
x86-based (32-bit) versions of Windows 7 SP1	Download the package now.
x64-based (64-bit) versions of Windows 7 SP1	Download the package now.
x64-based (64-bit) versions of Windows Server 2008 R2 SP1	Download the package now.
Itanium-based versions of Windows Server 2008 R2 SP1	Download the package now.

Install and run the tool.

Select Download on the Download Center webpage, then do one of the following:

• To install the tool immediately, select Open or Run, and then follow the instructions on your screen.
• To install the tool later, select Save, and then download the installation file to your computer. When you’re ready to install the tool, double-select the file.

In the Windows Update Standalone Installer dialog box, select Yes.

When the tool is being installed, it automatically runs. Although it typically takes less than 15 minutes to run, it might take much longer on some computers. Even if the progress bar seems to stop, the scan is still running, so don’t select Cancel.

When you see Installation complete, select Close.

Reinstall the update or service pack you were trying to install previously.

To manually fix corruption errors that the tool detects but can’t be fixed, see How to fix errors that are found in the CheckSUR log file.

Resolution — Download the package from Microsoft Update Catalog directly

You can also try to directly download the update package from Microsoft Update Catalog, and then install the update package manually.

For example, you may have problems when you try to install updates from Windows Update. In this situation, you can download the update package and try to install the update manually. To do this, follow these steps:

Open Microsoft Update Catalog in Internet Explorer.

In the search box, input the update number that you want to download. In this example, input 3006137. Then, select Search.

Find the update that applies to your operating system appropriately in the search results, and then select Add to add the update to your basket.

Select view basket to open your basket.

Select Download to download the update in your basket.

Select Browse to choose a location for the update you are downloading, and then select Continue.

Select Close after the download process is done. Then, you can find a folder that contains the update package in the location that you specified.

Open the folder, and then double-select the update package to install the update.

If the Windows update or service pack installed successfully, you are finished. If the problem is not fixed, or if System Update Readiness Tool cannot find the cause, contact us for more help.

Description of the common corruption errors

The following table lists the possible error code with Windows Update for your reference:

Code	Error	Description
0x80070002	ERROR_FILE_NOT_FOUND	The system cannot find the file specified.
0x8007000D	ERROR_INVALID_DATA	The data is invalid.
0x800F081F	CBS_E_SOURCE_MISSING	The source for the package or file not found.
0x80073712	ERROR_SXS_COMPONENT_STORE_CORRUPT	The component store is in an inconsistent state.
0x800736CC	ERROR_SXS_FILE_HASH_MISMATCH	A component’s file does not match the verification information present in the component manifest.
0x800705B9	ERROR_XML_PARSE_ERROR	Unable to parse the requested XML data.
0x80070246	ERROR_ILLEGAL_CHARACTER	An invalid character was encountered.
0x8007370D	ERROR_SXS_IDENTITY_PARSE_ERROR	An identity string is malformed.
0x8007370B	ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME	The name of an attribute in an identity is not within the valid range.
0x8007370A	ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_VALUE	The value of an attribute in an identity is not within the valid range.
0x80070057	ERROR_INVALID_PARAMETER	The parameter is incorrect.
0x800B0100	TRUST_E_NOSIGNATURE	No signature was present in the subject.
0x80092003	CRYPT_E_FILE_ERROR	An error occurred while Windows Update reads or writes to a file.
0x800B0101	CERT_E_EXPIRED	A required certificate is not within its validity period when verifying against the current system clock or the time stamp in the signed file.
0x8007371B	ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE	One or more required members of the transaction are not present.
0x80070490	ERROR_NOT_FOUND	Windows could not search for new updates.
0x800f0984	PSFX_E_MATCHING_BINARY_MISSING	Matching component directory exist but binary missing
0x800f0986	PSFX_E_APPLY_FORWARD_DELTA_FAILED	Applying forward delta failed
0x800f0982	PSFX_E_MATCHING_COMPONENT_NOT_FOUND	Can’t identify matching component for hydration

What does the System Update Readiness tool do

Verify the integrity of resources

The System Update Readiness tool verifies the integrity of the following resources:

• Files that are located in the following directories:
  • %SYSTEMROOT%\Servicing\Packages
  • %SYSTEMROOT%\WinSxS\Manifests
• Registry data that is located under the following registry subkeys:
  • HKEY_LOCAL_MACHINE\Components
  • HKEY_LOCAL_MACHINE\Schema
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Component Based Servicing

This list may be updated at any time.

When the System Update Readiness tool detects incorrect manifests, Cabinets, or registry data, it may replace the incorrect data with a corrected version.

Logging

The System Update Readiness tool creates a log file that captures any issues that the tool found or fixed. The log file is located here:

How to fix errors that are found in the CheckSUR log file

To manually fix corruption errors that the System Update Readiness tool detects but can’t fix, follow these steps:

%SYSTEMROOT% is an environment variable that saves the folder in which Windows is installed. For example, generally the %SYSTEMROOT% folder is C:\Windows.

Identify the packages that the tool can’t fix. For example, you may find the following in the log file:

In this case, the package that is corrupted is KB958690.

Copy the package (.msu) to the %SYSTEMROOT%\CheckSUR\packages directory. By default, this directory doesn’t exist and you need to create the directory.