Практическое руководство. Отображение расположенных сбоку вкладок с помощью TabControl How to: Display Side-Aligned Tabs with TabControl

Свойство Alignment элемента TabControl поддерживает вертикальное отображение вкладок (вдоль левой или правой границы элемента управления), в отличие от горизонтального отображения (поперек верхней или нижней области элемента управления). The Alignment property of TabControl supports displaying tabs vertically (along the left or right edge of the control), as opposed to horizontally (across the top or bottom of the control). Вертикальное отображение по умолчанию бывает неудобным для пользователя, так как свойство Text объекта TabPage не отображается на вкладке при включении стилей оформления. By default, this vertical display results in a poor user experience, because the Text property of the TabPage object does not display in the tab when visual styles are enabled. Также нет прямого способа управления направлением текста на вкладке. Для улучшения этого процесса можно использовать прорисовку владельцем TabControl . There is also no direct way to control the direction of the text within the tab. You can use owner draw on TabControl to improve this experience.

Ниже описан порядок визуализации вкладок с выравниванием по правому краю, в которых текст располагается слева направо, с помощью возможности «рисование владельцем». The following procedure shows how to render right-aligned tabs, with the tab text running from left to right, by using the «owner draw» feature.

Отображение вкладок с выравниванием по правому краю To display right-aligned tabs

Добавьте элемент TabControl в форму. Add a TabControl to your form.

Задайте для свойства Alignment значение Right. Set the Alignment property to Right.

Присвойте свойству SizeMode значение Fixed так, чтобы все вкладки имели одинаковую ширину. Set the SizeMode property to Fixed, so that all tabs are the same width.

Для свойства ItemSize установите необходимый фиксированный размер вкладок. Set the ItemSize property to the preferred fixed size for the tabs. Имейте в виду, что свойство ItemSize ведет себя так, как если бы вкладки располагались вверху, несмотря на то что они выровнены по правому краю. Keep in mind that the ItemSize property behaves as though the tabs were on top, although they are right-aligned. Таким образом, чтобы увеличить ширину вкладок, нужно изменить свойство Height, а чтобы сделать их выше, изменить свойство Width. As a result, in order to make the tabs wider, you must change the Height property, and in order to make them taller, you must change the Width property.

Для получения оптимальных результатов в примере кода ниже свойство Width имеет значение 25, а Height — значение 100. For best result with the code example below, set the Width of the tabs to 25 and the Height to 100.

Задайте для свойства DrawMode значение OwnerDrawFixed. Set the DrawMode property to OwnerDrawFixed.

Определите обработчик для события DrawItem элемента TabControl, выводящий текст слева направо. Define a handler for the DrawItem event of TabControl that renders the text from left to right.

Элемент управления TabControl (Windows Forms) TabControl Control (Windows Forms)

Элемент управления TabControl Windows Forms используется для отображения нескольких вкладок, аналогичных разделителям в записной книжке или меткам в наборе папок в картотеке. The Windows Forms TabControl displays multiple tabs, like dividers in a notebook or labels in a set of folders in a filing cabinet. Вкладки могут содержать изображения и другие элементы управления. The tabs can contain pictures and other controls. Используйте элемент управления TabControl для создания страниц свойств. Use the TabControl to create property pages.

в этом разделе In This Section

Общие сведения об элементе управления TabControl TabControl Control Overview
Описание элемента управления, его основных возможностей и свойств. Explains what this control is and its key features and properties.

Практическое руководство. Добавление элемента управления на вкладку How to: Add a Control to a Tab Page
Инструкции по отображению элементов управления на страницах вкладок. Gives directions for displaying controls on tab pages.

Практическое руководство. Добавление и удаление вкладок с помощью элемента управления TabControl в Windows Forms How to: Add and Remove Tabs with the Windows Forms TabControl
Инструкции по добавлению и удалению вкладок в конструкторе или в коде. Gives directions for adding and removing tabs in the designer or in code.

Практическое руководство. Изменение внешнего вида элемента управления TabControl в Windows Forms How to: Change the Appearance of the Windows Forms TabControl
Инструкции по настройке свойств, которые влияют на внешний вид отдельных вкладок. Gives directions for adjusting properties that affect the appearance of individual tabs.

Практическое руководство. Блокировка доступа ко вкладкам How to: Disable Tab Pages
Объясняется, как ограничить доступ к вкладке, например на основе учетных данных пользователя. Explains how to restrict access to a tab page, possibly based on user credentials.

Справочник Reference

Класс TabControl TabControl class
Описание класса и всех его членов. Describes this class and has links to all its members.

Связанные разделы Related Sections

Диалоговые окна в Windows Forms Dialog Boxes in Windows Forms
Список задач для диалоговых окон, в которых часто отображаются вкладки. Provides a list of tasks for dialog boxes, which often display tabs.

Элементы управления для использования в формах Windows Forms Controls to Use on Windows Forms
Полный список элементов управления Windows Forms со ссылками на информацию об их применении. Provides a complete list of Windows Forms controls, with links to information on their use.

Практическое руководство. Изменение внешнего вида элемента управления TabControl в Windows Forms How to: Change the Appearance of the Windows Forms TabControl

Внешний вид вкладок в Windows Forms можно изменить с помощью свойств TabControl и TabPage объектов, составляющих отдельные вкладки в элементе управления. You can change the appearance of tabs in Windows Forms by using properties of the TabControl and the TabPage objects that make up the individual tabs on the control. Устанавливая эти свойства, можно отображать изображения на вкладках, отображать вкладки вертикально, а не горизонтально, отображать несколько строк вкладок, а также включать и отключать вкладки программным способом. By setting these properties, you can display images on tabs, display tabs vertically instead of horizontally, display multiple rows of tabs, and enable or disable tabs programmatically.

Отображение значка в части метки вкладки To display an icon on the label part of a tab

Добавьте в ImageList форму элемент управления. Add an ImageList control to the form.

Добавление изображений в список изображений. Add images to the image list.

Установите ImageList свойство объекта в TabControl ImageList элемент управления. Set the ImageList property of the TabControl to the ImageList control.

Присвойте ImageIndex свойству объекта значение TabPage индекса соответствующего изображения в списке. Set the ImageIndex property of the TabPage to the index of an appropriate image in the list.

Создание нескольких строк вкладок To create multiple rows of tabs

Добавьте нужное число страниц вкладок. Add the number of tab pages you want.

Присвойте свойству Multiline элемента TabControl значение true . Set the Multiline property of the TabControl to true .

Если вкладки еще не отображаются в нескольких строках, задайте Width для свойства объекта значение, TabControl более узкую, чем все вкладки. If the tabs do not already appear in multiple rows, set the Width property of the TabControl to be narrower than all the tabs.

Размещение вкладок на стороне элемента управления To arrange tabs on the side of the control

• Задайте Alignment для свойства значение TabControlLeft или Right . Set the Alignment property of the TabControl to Left or Right.

Программное включение или отключение всех элементов управления на вкладке To programmatically enable or disable all controls on a tab

Задайте Enabled для свойства значение TabPage true или false . Set the Enabled property of the TabPage to true or false .

Создание собственного контрола на основе TabControl в C#

В один момент возникла задача сделать TabControl по отрисованному дизайну, с вкладками с левой стороны. Сложность была в том, что проект был уже написан с использованием winform, и переделывать его целиком не хотелось. Попытался реализовать эту задачу средствами класического TabControl, но встретился со множеством проблем, связанных с этим.

Первой проблемой стало то, что если спозиционировать вкладки с левой стороны, то мы получаем следующую картину:

Но мне нужно было, чтобы надписи шли гаризонтально. Изучив чуть глубже данный контрол, решил воспользоваться параметром DrawMode=OwnerDrawFixed. Все надписи стерлись, и на кнопке стало возможным писать и рисовать. Но остался фон самой кнопки, который полностью закрасить не удалось.
Следующим шагом поменял Appearance c Normal на Buttons, был еще вариант FlatButtons, но через конструктор его поставить не удалось, а выставление в коде ни на что не повлияло.
В режиме Buttons вылезла такая ерунда:

На картинке видно, что между кнопками и набором TabPages появилось расстояние. Отуда оно взялось и каким параметром регулируется, мне выяснить так и не удалось.

Еще некоторое время я изучал существующие платные и бесплатные библиотеки контролов на наличие возможности изменения под себя вкладок TabControl, но они либо предлагали использовать заранее созданные стили, либо позволяли максимум поменять цвет.

В итоге намучившись с ним, я решил написать свой контрол, взяв за основу стандартный. Целью стало скрыть стандартные вкладки и на смену им поставить свои, завязав их на контрол.

Постараюсь подробно описать все, что для этого пришлось сделать.

Шаг 1
Для начала в проекте нужно создать новый котрол. Для этого в панели Solution Explorer кликаем правой кнопкой по проекту, далее Add->Component, в открывшейся панели вводим имя нового контрола (у меня это NewTabControl)

Шаг 2
После создания открываем код созданного контрола. В коде делаем следующие правки:
дописываем
using System.Windows.Forms;
using System.Drawing;

Создаем три класса, наследуя их от классов стандартных контролов.

Класс нового TabControl
public partial class NewTabControl: System.Windows.Forms.TabControl

Класс нового контрола
public class NewTabPanel: System.Windows.Forms.Panel

Класс одной вкладки
public class PanelTP: System.Windows.Forms.Panel

Теперь нам нужно перезагрузить следующий метод в классе NewTabControl:

Данное действие позволит нам скрыть стандартные вкладки.

Теперь нам нужно связать все классы между собой. Не буду описывать весь код, его я приложу к данной статье. Опишу только самые интересные моменты.

Шаг 3
Компонуем все элементы в классе NewTabPanel:

Шаг 4
Теперь можно задать формат, как будет выглядеть сама вкладка.
На данном этапе вы можете сами расположить текст, картинку или любой другой элемент на будущей вкладке. А также задать размер и фон самой вкладки.
У себя я вывожу иконку и название вкладки.

В классе PanelTP создаем метод:

Шаг 5
Не буду описывать методы, обрабатывающие события, они подробно описаны в приложенном проекте. Перейду к применению.

После того как мы все сохранили, на панели Toolbox появятся новые компоненты

Теперь мы можем его разместить в нашей форме как захотим.
Чтобы добавить вкладку используем:

Где id — это номер вкадки

При такой реализации TabControl вы всегда сможете настроить сортировку между вкладками или скрыть выбранную вкладку, сделать вкладку любого размера и оформления, сделать панель с вкладками соврачиваемой и разворачиваемой.
По такому же принципу вы можете создать любой свой контрол скомпоновав и запрограммировав его из имеющихся.

Возможно, для кого-то я описал очевидные вещи, но надеюсь, найдутся и те, кому данная статья будет полезна.

Исходники проекта можно скачать тут.
Бинарник тут.

Возможно вам также будет интересна моя статья Как подключить сторонний браузер в приложении на C#

Tab Control Class

Definition

Manages a related set of tab pages.

Examples

The following code example uses the Visual Studio Windows Forms Designer to create a TabControl with three tab pages. Each tab page contains several controls.

Remarks

A TabControl contains tab pages, which are represented by TabPage objects that you add through the TabPages property. The order of tab pages in this collection reflects the order the tabs appear in the control.

The user can change the current TabPage by clicking one of the tabs in the control. You can also programmatically change the current TabPage by using one of the following TabControl properties:

In .NET Framework 2.0, you can also use one of the following methods:

In .NET Framework 2.0, you can respond when the current tab changes by handling one of the following events:

The tabs in a TabControl are part of the TabControl, but not parts of the individual TabPage controls. Members of the TabPage class, such as the ForeColor property, affect only the client rectangle of the tab page, but not the tabs. Additionally, the Hide method of the TabPage will not hide the tab. To hide the tab, you must remove the TabPage control from the TabControl.TabPages collection.

In .NET Framework 2.0, the tab is considered part of the tab page for determining when the Enter and Leave events of the TabPage occur. In earlier versions of the .NET Framework, the Enter and Leave events of the TabPage do not occur when focus enters or leaves a tab, but only when focus enters or leaves the client rectangle of the tab page.

The following events are not raised for the TabControl class unless there is at least one TabPage in the TabControl.TabPages collection: Control.Click, Control.DoubleClick, Control.MouseDown, Control.MouseUp, Control.MouseHover, Control.MouseEnter, Control.MouseLeave and Control.MouseMove. If there is at least one TabPage in the collection, and the user interacts with the tab control’s header (where the TabPage names appear), the TabControl raises the appropriate event. However, if the user interaction is within the ClientRectangle of the tab page, the TabPage raises the appropriate event.

Controls contained in a TabPage are not created until the tab page is shown, and any data bindings in these controls are not activated until the tab page is shown.

When visual styles are enabled, and the Alignment property is set to a value other than Top, the tab contents might not render correctly. To work around this issue, you can paint the tab contents yourself using owner drawing. For more information, see How to: Display Side-Aligned Tabs with TabControl.

When the Alignment property is set to a value other than Top and the Appearance property is set to a value other than Normal, the tab page contents might not render correctly.

Constructors

Initializes a new instance of the TabControl class.

Properties

Gets the AccessibleObject assigned to the control.

(Inherited from Control) AccessibleDefaultActionDescription

Gets or sets the default action description of the control for use by accessibility client applications.

(Inherited from Control) AccessibleDescription

Gets or sets the description of the control used by accessibility client applications.

(Inherited from Control) AccessibleName

Gets or sets the name of the control used by accessibility client applications.

(Inherited from Control) AccessibleRole

Gets or sets the accessible role of the control.

(Inherited from Control) Alignment

Gets or sets the area of the control (for example, along the top) where the tabs are aligned.

Gets or sets a value indicating whether the control can accept data that the user drags onto it.

(Inherited from Control) Anchor

Gets or sets the edges of the container to which a control is bound and determines how a control is resized with its parent.

(Inherited from Control) Appearance

Gets or sets the visual appearance of the control’s tabs.

Gets or sets where this control is scrolled to in ScrollControlIntoView(Control).

(Inherited from Control) AutoSize

This property is not relevant for this class.

(Inherited from Control) BackColor

This member is not meaningful for this control.

This member is not meaningful for this control.

This member is not meaningful for this control.

Gets or sets the background image layout as defined in the ImageLayout enumeration.

(Inherited from Control) BindingContext

Gets or sets the BindingContext for the control.

(Inherited from Control) Bottom

Gets the distance, in pixels, between the bottom edge of the control and the top edge of its container’s client area.

(Inherited from Control) Bounds

Gets or sets the size and location of the control including its nonclient elements, in pixels, relative to the parent control.

(Inherited from Control) CanEnableIme

Gets a value indicating whether the ImeMode property can be set to an active value, to enable IME support.

(Inherited from Control) CanFocus

Gets a value indicating whether the control can receive focus.

(Inherited from Control) CanRaiseEvents

Determines if events can be raised on the control.

(Inherited from Control) CanSelect

Gets a value indicating whether the control can be selected.

(Inherited from Control) Capture

Gets or sets a value indicating whether the control has captured the mouse.

(Inherited from Control) CausesValidation

Gets or sets a value indicating whether the control causes validation to be performed on any controls that require validation when it receives focus.

(Inherited from Control) ClientRectangle

Gets the rectangle that represents the client area of the control.

(Inherited from Control) ClientSize

Gets or sets the height and width of the client area of the control.

(Inherited from Control) CompanyName

Gets the name of the company or creator of the application containing the control.

(Inherited from Control) Container

Gets the IContainer that contains the Component.

(Inherited from Component) ContainsFocus

Gets a value indicating whether the control, or one of its child controls, currently has the input focus.

(Inherited from Control) ContextMenu

Gets or sets the shortcut menu associated with the control.

(Inherited from Control) ContextMenuStrip

Gets or sets the ContextMenuStrip associated with this control.

(Inherited from Control) Controls

Gets the collection of controls contained within the control.

(Inherited from Control) Created

Gets a value indicating whether the control has been created.

(Inherited from Control) CreateParams

This member overrides CreateParams.

Gets or sets the cursor that is displayed when the mouse pointer is over the control.

(Inherited from Control) DataBindings

Gets the data bindings for the control.

(Inherited from Control) DefaultCursor

Gets or sets the default cursor for the control.

(Inherited from Control) DefaultImeMode

Gets the default Input Method Editor (IME) mode supported by the control.

(Inherited from Control) DefaultMargin

Gets the space, in pixels, that is specified by default between controls.

(Inherited from Control) DefaultMaximumSize

Gets the length and height, in pixels, that is specified as the default maximum size of a control.

(Inherited from Control) DefaultMinimumSize

Gets the length and height, in pixels, that is specified as the default minimum size of a control.

(Inherited from Control) DefaultPadding

Gets the internal spacing, in pixels, of the contents of a control.

(Inherited from Control) DefaultSize

Gets the default size of the control.

Gets a value that indicates whether the Component is currently in design mode.

(Inherited from Component) DeviceDpi

Gets the DPI value for the display device where the control is currently being displayed.

(Inherited from Control) DisplayRectangle

Gets the display area of the control’s tab pages.

Gets a value indicating whether the base Control class is in the process of disposing.

(Inherited from Control) Dock

Gets or sets which control borders are docked to its parent control and determines how a control is resized with its parent.

(Inherited from Control) DoubleBuffered

This member is not meaningful for this control.

Gets or sets a value indicating whether this control should redraw its surface using a secondary buffer to reduce or prevent flicker.

(Inherited from Control) DrawMode

Gets or sets the way that the control’s tabs are drawn.

Gets or sets a value indicating whether the control can respond to user interaction.

(Inherited from Control) Events

Gets the list of event handlers that are attached to this Component.

(Inherited from Component) Focused

Gets a value indicating whether the control has input focus.

(Inherited from Control) Font

Gets or sets the font of the text displayed by the control.

(Inherited from Control) FontHeight

Gets or sets the height of the font of the control.

(Inherited from Control) ForeColor

This member is not meaningful for this control.

Gets the window handle that the control is bound to.

(Inherited from Control) HasChildren

Gets a value indicating whether the control contains one or more child controls.

(Inherited from Control) Height

Gets or sets the height of the control.

(Inherited from Control) HotTrack

Gets or sets a value indicating whether the control’s tabs change in appearance when the mouse passes over them.

Gets or sets the images to display on the control’s tabs.

Gets or sets the Input Method Editor (IME) mode of the control.

(Inherited from Control) ImeModeBase

Gets or sets the IME mode of a control.

(Inherited from Control) InvokeRequired

Gets a value indicating whether the caller must call an invoke method when making method calls to the control because the caller is on a different thread than the one the control was created on.

(Inherited from Control) IsAccessible

Gets or sets a value indicating whether the control is visible to accessibility applications.

(Inherited from Control) IsDisposed

Gets a value indicating whether the control has been disposed of.

(Inherited from Control) IsHandleCreated

Gets a value indicating whether the control has a handle associated with it.

(Inherited from Control) IsMirrored

Gets a value indicating whether the control is mirrored.

(Inherited from Control) ItemSize

Gets or sets the size of the control’s tabs.

Gets a cached instance of the control’s layout engine.

(Inherited from Control) Left

Gets or sets the distance, in pixels, between the left edge of the control and the left edge of its container’s client area.

(Inherited from Control) Location

Gets or sets the coordinates of the upper-left corner of the control relative to the upper-left corner of its container.

(Inherited from Control) Margin

Gets or sets the space between controls.

(Inherited from Control) MaximumSize

Gets or sets the size that is the upper limit that GetPreferredSize(Size) can specify.

(Inherited from Control) MinimumSize

Gets or sets the size that is the lower limit that GetPreferredSize(Size) can specify.

(Inherited from Control) Multiline

Gets or sets a value indicating whether more than one row of tabs can be displayed.

Gets or sets the name of the control.

(Inherited from Control) Padding

Gets or sets the amount of space around each item on the control’s tab pages.

Gets or sets the parent container of the control.

(Inherited from Control) PreferredSize

Gets the size of a rectangular area into which the control can fit.

(Inherited from Control) ProductName

Gets the product name of the assembly containing the control.

(Inherited from Control) ProductVersion

Gets the version of the assembly containing the control.

(Inherited from Control) RecreatingHandle

Gets a value indicating whether the control is currently re-creating its handle.

(Inherited from Control) Region

Gets or sets the window region associated with the control.

(Inherited from Control) RenderRightToLeft

This property is now obsolete.

(Inherited from Control) ResizeRedraw

Gets or sets a value indicating whether the control redraws itself when resized.

(Inherited from Control) Right

Gets the distance, in pixels, between the right edge of the control and the left edge of its container’s client area.

(Inherited from Control) RightToLeft

Gets or sets a value indicating whether control’s elements are aligned to support locales using right-to-left fonts.

(Inherited from Control) RightToLeftLayout

Gets or sets a value indicating whether right-to-left mirror placement is turned on.

Gets the number of rows that are currently being displayed in the control’s tab strip.

Gets a value that determines the scaling of child controls.

(Inherited from Control) SelectedIndex

Gets or sets the index of the currently selected tab page.

Gets or sets the currently selected tab page.

Gets a value indicating whether the control should display focus rectangles.

(Inherited from Control) ShowKeyboardCues

Gets a value indicating whether the user interface is in the appropriate state to show or hide keyboard accelerators.

(Inherited from Control) ShowToolTips

Gets or sets a value indicating whether a tab’s ToolTip is shown when the mouse passes over the tab.

Gets or sets the site of the control.

(Inherited from Control) Size

Gets or sets the height and width of the control.

(Inherited from Control) SizeMode

Gets or sets the way that the control’s tabs are sized.

Gets the number of tabs in the tab strip.

Gets or sets the tab order of the control within its container.

(Inherited from Control) TabPages

Gets the collection of tab pages in this tab control.

Gets or sets a value indicating whether the user can give the focus to this control using the TAB key.

(Inherited from Control) Tag

Gets or sets the object that contains data about the control.

(Inherited from Control) Text

This member is not meaningful for this control.

Gets or sets the distance, in pixels, between the top edge of the control and the top edge of its container’s client area.

(Inherited from Control) TopLevelControl

Gets the parent control that is not parented by another Windows Forms control. Typically, this is the outermost Form that the control is contained in.

(Inherited from Control) UseWaitCursor

Gets or sets a value indicating whether to use the wait cursor for the current control and all child controls.

(Inherited from Control) Visible

Gets or sets a value indicating whether the control and all its child controls are displayed.

(Inherited from Control) Width

Gets or sets the width of the control.

(Inherited from Control) WindowTarget

This property is not relevant for this class.

(Inherited from Control)

Methods

Notifies the accessibility client applications of the specified AccessibleEvents for the specified child control.

(Inherited from Control) AccessibilityNotifyClients(AccessibleEvents, Int32, Int32)

Notifies the accessibility client applications of the specified AccessibleEvents for the specified child control .

(Inherited from Control) BeginInvoke(Delegate)

Executes the specified delegate asynchronously on the thread that the control’s underlying handle was created on.

(Inherited from Control) BeginInvoke(Delegate, Object[])

Executes the specified delegate asynchronously with the specified arguments, on the thread that the control’s underlying handle was created on.

(Inherited from Control) BringToFront()

Brings the control to the front of the z-order.

(Inherited from Control) Contains(Control)

Retrieves a value indicating whether the specified control is a child of the control.

(Inherited from Control) CreateAccessibilityInstance()

Creates a new accessibility object for the control.

(Inherited from Control) CreateControl()

Forces the creation of the visible control, including the creation of the handle and any visible child controls.

(Inherited from Control) CreateControlsInstance()

Creates the Graphics for the control.

(Inherited from Control) CreateHandle()

This member overrides CreateHandle().

Creates an object that contains all the relevant information required to generate a proxy used to communicate with a remote object.

(Inherited from MarshalByRefObject) DefWndProc(Message)

Sends the specified message to the default window procedure.

(Inherited from Control) DeselectTab(Int32)

Makes the tab following the tab with the specified index the current tab.

Makes the tab following the tab with the specified name the current tab.

Makes the tab following the specified TabPage the current tab.

Destroys the handle associated with the control.

(Inherited from Control) Dispose()

Releases all resources used by the Component.

(Inherited from Component) Dispose(Boolean)

Releases the unmanaged resources used by the Control and its child controls and optionally releases the managed resources.

Begins a drag-and-drop operation.

(Inherited from Control) DrawToBitmap(Bitmap, Rectangle)

Supports rendering to the specified bitmap.

(Inherited from Control) EndInvoke(IAsyncResult)

Retrieves the return value of the asynchronous operation represented by the IAsyncResult passed.

(Inherited from Control) Equals(Object)

Determines whether the specified object is equal to the current object.

(Inherited from Object) FindForm()

Retrieves the form that the control is on.

(Inherited from Control) Focus()

Sets input focus to the control.

(Inherited from Control) GetAccessibilityObjectById(Int32)

Retrieves the specified AccessibleObject.

(Inherited from Control) GetAutoSizeMode()

Retrieves a value indicating how a control will behave when its AutoSize property is enabled.

(Inherited from Control) GetChildAtPoint(Point)

Retrieves the child control that is located at the specified coordinates.

(Inherited from Control) GetChildAtPoint(Point, GetChildAtPointSkip)

Retrieves the child control that is located at the specified coordinates, specifying whether to ignore child controls of a certain type.

(Inherited from Control) GetContainerControl()

Returns the next ContainerControl up the control’s chain of parent controls.

(Inherited from Control) GetControl(Int32)

Gets the TabPage control at the specified location.

Serves as the default hash function.

(Inherited from Object) GetItems()

Gets an array of TabPage controls that belong to the TabControl control.

Copies the TabPage controls in the TabControl to an array of the specified type.

Retrieves the current lifetime service object that controls the lifetime policy for this instance.

(Inherited from MarshalByRefObject) GetNextControl(Control, Boolean)

Retrieves the next control forward or back in the tab order of child controls.

(Inherited from Control) GetPreferredSize(Size)

Retrieves the size of a rectangular area into which a control can be fitted.

(Inherited from Control) GetScaledBounds(Rectangle, SizeF, BoundsSpecified)

Retrieves the bounds within which the control is scaled.

(Inherited from Control) GetService(Type)

Returns an object that represents a service provided by the Component or by its Container.

(Inherited from Component) GetStyle(ControlStyles)

Retrieves the value of the specified control style bit for the control.

(Inherited from Control) GetTabRect(Int32)

Returns the bounding rectangle for a specified tab in this tab control.

Gets the ToolTip for the specified TabPage.

Determines if the control is a top-level control.

(Inherited from Control) GetType()

Gets the Type of the current instance.

(Inherited from Object) Hide()

Conceals the control from the user.

(Inherited from Control) InitializeLifetimeService()

Obtains a lifetime service object to control the lifetime policy for this instance.

(Inherited from MarshalByRefObject) InitLayout()

Called after the control has been added to another container.

(Inherited from Control) Invalidate()

Invalidates the entire surface of the control and causes the control to be redrawn.

(Inherited from Control) Invalidate(Boolean)

Invalidates a specific region of the control and causes a paint message to be sent to the control. Optionally, invalidates the child controls assigned to the control.

(Inherited from Control) Invalidate(Rectangle)

Invalidates the specified region of the control (adds it to the control’s update region, which is the area that will be repainted at the next paint operation), and causes a paint message to be sent to the control.

(Inherited from Control) Invalidate(Rectangle, Boolean)

Invalidates the specified region of the control (adds it to the control’s update region, which is the area that will be repainted at the next paint operation), and causes a paint message to be sent to the control. Optionally, invalidates the child controls assigned to the control.

(Inherited from Control) Invalidate(Region)

Invalidates the specified region of the control (adds it to the control’s update region, which is the area that will be repainted at the next paint operation), and causes a paint message to be sent to the control.

(Inherited from Control) Invalidate(Region, Boolean)

Invalidates the specified region of the control (adds it to the control’s update region, which is the area that will be repainted at the next paint operation), and causes a paint message to be sent to the control. Optionally, invalidates the child controls assigned to the control.

(Inherited from Control) Invoke(Delegate)

Executes the specified delegate on the thread that owns the control’s underlying window handle.

(Inherited from Control) Invoke(Delegate, Object[])

Executes the specified delegate, on the thread that owns the control’s underlying window handle, with the specified list of arguments.

(Inherited from Control) InvokeGotFocus(Control, EventArgs)

Raises the GotFocus event for the specified control.

(Inherited from Control) InvokeLostFocus(Control, EventArgs)

Raises the LostFocus event for the specified control.

(Inherited from Control) InvokeOnClick(Control, EventArgs)

Raises the Click event for the specified control.

(Inherited from Control) InvokePaint(Control, PaintEventArgs)

Raises the Paint event for the specified control.

(Inherited from Control) InvokePaintBackground(Control, PaintEventArgs)

Raises the PaintBackground event for the specified control.

(Inherited from Control) IsInputChar(Char)

Determines if a character is an input character that the control recognizes.

(Inherited from Control) IsInputKey(Keys)

Determines whether the specified key is a regular input key or a special key that requires preprocessing.

Converts a Logical DPI value to its equivalent DeviceUnit DPI value.

(Inherited from Control) LogicalToDeviceUnits(Size)

Transforms a size from logical to device units by scaling it for the current DPI and rounding down to the nearest integer value for width and height.

(Inherited from Control) MemberwiseClone()

Creates a shallow copy of the current Object.

(Inherited from Object) MemberwiseClone(Boolean)

Creates a shallow copy of the current MarshalByRefObject object.

(Inherited from MarshalByRefObject) NotifyInvalidate(Rectangle)

Raises the Invalidated event with a specified region of the control to invalidate.

(Inherited from Control) OnAutoSizeChanged(EventArgs)

(Inherited from Control) OnBackColorChanged(EventArgs)

(Inherited from Control) OnBackgroundImageChanged(EventArgs)

(Inherited from Control) OnBackgroundImageLayoutChanged(EventArgs)

(Inherited from Control) OnBindingContextChanged(EventArgs)

(Inherited from Control) OnCausesValidationChanged(EventArgs)

(Inherited from Control) OnChangeUICues(UICuesEventArgs)

Raises the ChangeUICues event.

(Inherited from Control) OnClick(EventArgs)

Raises the Click event.

(Inherited from Control) OnClientSizeChanged(EventArgs)

(Inherited from Control) OnContextMenuChanged(EventArgs)

(Inherited from Control) OnContextMenuStripChanged(EventArgs)

(Inherited from Control) OnControlAdded(ControlEventArgs)

Raises the ControlAdded event.

(Inherited from Control) OnControlRemoved(ControlEventArgs)

(Inherited from Control) OnCreateControl()

(Inherited from Control) OnCursorChanged(EventArgs)

(Inherited from Control) OnDeselected(TabControlEventArgs)

Raises the Deselected event.

Raises the Deselecting event.

Raises the DockChanged event.

(Inherited from Control) OnDoubleClick(EventArgs)

Raises the DoubleClick event.

(Inherited from Control) OnDpiChangedAfterParent(EventArgs)

(Inherited from Control) OnDpiChangedBeforeParent(EventArgs)

(Inherited from Control) OnDragDrop(DragEventArgs)

Raises the DragDrop event.

(Inherited from Control) OnDragEnter(DragEventArgs)

Raises the DragEnter event.

(Inherited from Control) OnDragLeave(EventArgs)

Raises the DragLeave event.

(Inherited from Control) OnDragOver(DragEventArgs)

Raises the DragOver event.

(Inherited from Control) OnDrawItem(DrawItemEventArgs)

Raises the DrawItem event.

(Inherited from Control) OnEnter(EventArgs)

Raises the Enter event of the TabControl.

Raises the Enter event.

(Inherited from Control) OnFontChanged(EventArgs)

Raises the FontChanged event.

(Inherited from Control) OnGiveFeedback(GiveFeedbackEventArgs)

Raises the GiveFeedback event.

(Inherited from Control) OnGotFocus(EventArgs) OnGotFocus(EventArgs)

Raises the GotFocus event.

(Inherited from Control) OnHandleCreated(EventArgs)

(Inherited from Control) OnImeModeChanged(EventArgs)

(Inherited from Control) OnInvalidated(InvalidateEventArgs)

Raises the Invalidated event.

(Inherited from Control) OnKeyDown(KeyEventArgs)

Raises the KeyDown event.

Raises the KeyPress event.

(Inherited from Control) OnKeyUp(KeyEventArgs)

Raises the KeyUp event.

(Inherited from Control) OnLayout(LayoutEventArgs)

Raises the Layout event.

(Inherited from Control) OnLeave(EventArgs)

Raises the Leave event of the TabControl.

Raises the Leave event.

(Inherited from Control) OnLocationChanged(EventArgs)

(Inherited from Control) OnLostFocus(EventArgs) OnLostFocus(EventArgs)

Raises the LostFocus event.

(Inherited from Control) OnMarginChanged(EventArgs)

(Inherited from Control) OnMouseCaptureChanged(EventArgs)

(Inherited from Control) OnMouseClick(MouseEventArgs)

Raises the MouseClick event.

(Inherited from Control) OnMouseDoubleClick(MouseEventArgs)

(Inherited from Control) OnMouseDown(MouseEventArgs)

Raises the MouseDown event.

(Inherited from Control) OnMouseEnter(EventArgs)

Raises the MouseEnter event.

(Inherited from Control) OnMouseHover(EventArgs)

Raises the MouseHover event.

(Inherited from Control) OnMouseLeave(EventArgs)

Raises the MouseLeave event.

(Inherited from Control) OnMouseMove(MouseEventArgs)

Raises the MouseMove event.

(Inherited from Control) OnMouseUp(MouseEventArgs)

Raises the MouseUp event.

(Inherited from Control) OnMouseWheel(MouseEventArgs)

Raises the MouseWheel event.

(Inherited from Control) OnMove(EventArgs)

Raises the Move event.

(Inherited from Control) OnNotifyMessage(Message)

Notifies the control of Windows messages.

(Inherited from Control) OnPaddingChanged(EventArgs)

(Inherited from Control) OnPaint(PaintEventArgs)

Raises the Paint event.

(Inherited from Control) OnPaintBackground(PaintEventArgs)

Paints the background of the control.

(Inherited from Control) OnParentBackColorChanged(EventArgs)

Raises the BackColorChanged event when the BackColor property value of the control’s container changes.

(Inherited from Control) OnParentBackgroundImageChanged(EventArgs)

Raises the BackgroundImageChanged event when the BackgroundImage property value of the control’s container changes.

(Inherited from Control) OnParentBindingContextChanged(EventArgs)

Raises the BindingContextChanged event when the BindingContext property value of the control’s container changes.

(Inherited from Control) OnParentChanged(EventArgs)

(Inherited from Control) OnParentCursorChanged(EventArgs)

(Inherited from Control) OnParentEnabledChanged(EventArgs)

Raises the EnabledChanged event when the Enabled property value of the control’s container changes.

(Inherited from Control) OnParentFontChanged(EventArgs)

Raises the FontChanged event when the Font property value of the control’s container changes.

(Inherited from Control) OnParentForeColorChanged(EventArgs)

Raises the ForeColorChanged event when the ForeColor property value of the control’s container changes.

(Inherited from Control) OnParentRightToLeftChanged(EventArgs)

Raises the RightToLeftChanged event when the RightToLeft property value of the control’s container changes.

(Inherited from Control) OnParentVisibleChanged(EventArgs)

Raises the VisibleChanged event when the Visible property value of the control’s container changes.

(Inherited from Control) OnPreviewKeyDown(PreviewKeyDownEventArgs)

(Inherited from Control) OnPrint(PaintEventArgs)

Raises the Paint event.

(Inherited from Control) OnQueryContinueDrag(QueryContinueDragEventArgs)

(Inherited from Control) OnRegionChanged(EventArgs)

(Inherited from Control) OnResize(EventArgs)

(Inherited from Control) OnRightToLeftLayoutChanged(EventArgs)

Raises the Selected event.

Raises the Selecting event.

Raises the SizeChanged event.

(Inherited from Control) OnStyleChanged(EventArgs)

(Inherited from Control) OnTabIndexChanged(EventArgs)

(Inherited from Control) OnTabStopChanged(EventArgs)

(Inherited from Control) OnTextChanged(EventArgs)

Raises the TextChanged event.

(Inherited from Control) OnValidated(EventArgs)

Raises the Validated event.

(Inherited from Control) OnValidating(CancelEventArgs)

Raises the Validating event.

(Inherited from Control) OnVisibleChanged(EventArgs)

(Inherited from Control) PerformLayout()

Forces the control to apply layout logic to all its child controls.

(Inherited from Control) PerformLayout(Control, String)

Forces the control to apply layout logic to all its child controls.

(Inherited from Control) PointToClient(Point)

Computes the location of the specified screen point into client coordinates.

(Inherited from Control) PointToScreen(Point)

Computes the location of the specified client point into screen coordinates.

(Inherited from Control) PreProcessControlMessage(Message)

Preprocesses keyboard or input messages within the message loop before they are dispatched.

(Inherited from Control) PreProcessMessage(Message)

Preprocesses keyboard or input messages within the message loop before they are dispatched.

(Inherited from Control) ProcessCmdKey(Message, Keys)

Processes a command key.

(Inherited from Control) ProcessDialogChar(Char)

Processes a dialog character.

(Inherited from Control) ProcessDialogKey(Keys)

Processes a dialog key.

(Inherited from Control) ProcessKeyEventArgs(Message)

Processes a key message and generates the appropriate control events.

(Inherited from Control) ProcessKeyMessage(Message)

Processes a keyboard message.

(Inherited from Control) ProcessKeyPreview(Message)

Previews a keyboard message.

Processes a mnemonic character.

(Inherited from Control) RaiseDragEvent(Object, DragEventArgs)

Raises the appropriate drag event.

(Inherited from Control) RaiseKeyEvent(Object, KeyEventArgs)

Raises the appropriate key event.

(Inherited from Control) RaiseMouseEvent(Object, MouseEventArgs)

Raises the appropriate mouse event.

(Inherited from Control) RaisePaintEvent(Object, PaintEventArgs)

Raises the appropriate paint event.

(Inherited from Control) RecreateHandle()

Forces the re-creation of the handle for the control.

(Inherited from Control) RectangleToClient(Rectangle)

Computes the size and location of the specified screen rectangle in client coordinates.

(Inherited from Control) RectangleToScreen(Rectangle)

Computes the size and location of the specified client rectangle in screen coordinates.

(Inherited from Control) Refresh()

Forces the control to invalidate its client area and immediately redraw itself and any child controls.

(Inherited from Control) RemoveAll()

Removes all the tab pages and additional controls from this tab control.

Provides constants for rescaling the control when a DPI change occurs.

(Inherited from Control) ResetBackColor()

Resets the BackColor property to its default value.

(Inherited from Control) ResetBindings()

Causes a control bound to the BindingSource to reread all the items in the list and refresh their displayed values.

(Inherited from Control) ResetCursor()

Resets the Cursor property to its default value.

(Inherited from Control) ResetFont()

Resets the Font property to its default value.

(Inherited from Control) ResetForeColor()

Resets the ForeColor property to its default value.

(Inherited from Control) ResetImeMode()

Resets the ImeMode property to its default value.

(Inherited from Control) ResetMouseEventArgs()

Resets the control to handle the MouseLeave event.

(Inherited from Control) ResetRightToLeft()

Resets the RightToLeft property to its default value.

(Inherited from Control) ResetText()

Resets the Text property to its default value (Empty).

(Inherited from Control) ResumeLayout()

Resumes usual layout logic.

(Inherited from Control) ResumeLayout(Boolean)

Resumes usual layout logic, optionally forcing an immediate layout of pending layout requests.

(Inherited from Control) RtlTranslateAlignment(ContentAlignment)

Converts the specified ContentAlignment to the appropriate ContentAlignment to support right-to-left text.

(Inherited from Control) RtlTranslateAlignment(HorizontalAlignment)

Converts the specified HorizontalAlignment to the appropriate HorizontalAlignment to support right-to-left text.

(Inherited from Control) RtlTranslateAlignment(LeftRightAlignment)

Converts the specified LeftRightAlignment to the appropriate LeftRightAlignment to support right-to-left text.

(Inherited from Control) RtlTranslateContent(ContentAlignment)

Converts the specified ContentAlignment to the appropriate ContentAlignment to support right-to-left text.

(Inherited from Control) RtlTranslateHorizontal(HorizontalAlignment)

Converts the specified HorizontalAlignment to the appropriate HorizontalAlignment to support right-to-left text.

(Inherited from Control) RtlTranslateLeftRight(LeftRightAlignment)

Converts the specified LeftRightAlignment to the appropriate LeftRightAlignment to support right-to-left text.

(Inherited from Control) Scale(Single)

Scales the control and any child controls.

(Inherited from Control) Scale(Single, Single)

Scales the entire control and any child controls.

(Inherited from Control) Scale(SizeF)

Scales the control and all child controls by the specified scaling factor.

(Inherited from Control) ScaleBitmapLogicalToDevice(Bitmap)

Scales a logical bitmap value to it’s equivalent device unit value when a DPI change occurs.

(Inherited from Control) ScaleControl(SizeF, BoundsSpecified)

Scales a control’s location, size, padding and margin.

(Inherited from Control) ScaleCore(Single, Single)

This method is not relevant for this class.

(Inherited from Control) Select()

Activates the control.

(Inherited from Control) Select(Boolean, Boolean)

Activates a child control. Optionally specifies the direction in the tab order to select the control from.

(Inherited from Control) SelectNextControl(Control, Boolean, Boolean, Boolean, Boolean)

Activates the next control.

(Inherited from Control) SelectTab(Int32)

Makes the tab with the specified index the current tab.

Makes the tab with the specified name the current tab.

Makes the specified TabPage the current tab.

Sends the control to the back of the z-order.

(Inherited from Control) SetAutoSizeMode(AutoSizeMode)

Sets a value indicating how a control will behave when its AutoSize property is enabled.

(Inherited from Control) SetBounds(Int32, Int32, Int32, Int32)

Sets the bounds of the control to the specified location and size.

(Inherited from Control) SetBounds(Int32, Int32, Int32, Int32, BoundsSpecified)

Sets the specified bounds of the control to the specified location and size.

(Inherited from Control) SetBoundsCore(Int32, Int32, Int32, Int32, BoundsSpecified)

Performs the work of setting the specified bounds of this control.

(Inherited from Control) SetClientSizeCore(Int32, Int32)

Sets the size of the client area of the control.

(Inherited from Control) SetStyle(ControlStyles, Boolean)

Sets a specified ControlStyles flag to either true or false .

(Inherited from Control) SetTopLevel(Boolean)

Sets the control as the top-level control.

(Inherited from Control) SetVisibleCore(Boolean)

Sets the control to the specified visible state.

(Inherited from Control) Show()

Displays the control to the user.

(Inherited from Control) SizeFromClientSize(Size)

Determines the size of the entire control from the height and width of its client area.

(Inherited from Control) SuspendLayout()

Temporarily suspends the layout logic for the control.

(Inherited from Control) ToString()

Returns a string that represents the TabControl control.

Causes the control to redraw the invalidated regions within its client area.

(Inherited from Control) UpdateBounds()

Updates the bounds of the control with the current size and location.

(Inherited from Control) UpdateBounds(Int32, Int32, Int32, Int32)

Updates the bounds of the control with the specified size and location.

(Inherited from Control) UpdateBounds(Int32, Int32, Int32, Int32, Int32, Int32)

Updates the bounds of the control with the specified size, location, and client size.

(Inherited from Control) UpdateStyles()

Forces the assigned styles to be reapplied to the control.

(Inherited from Control) UpdateTabSelection(Boolean)

This API supports the product infrastructure and is not intended to be used directly from your code.

Sets the Visible property to true for the appropriate TabPage control in the TabPages collection.

Updates the control in its parent’s z-order.

(Inherited from Control) WndProc(Message)

Events

This event is not relevant for this class.

(Inherited from Control) BackColorChanged

This event is not meaningful for this control.

Occurs when the value of the BackgroundImage property changes.

Occurs when the value of the BackgroundImageLayout property changes.

Occurs when the BackgroundImageLayout property changes.

(Inherited from Control) BindingContextChanged

Occurs when the value of the BindingContext property changes.

(Inherited from Control) CausesValidationChanged

Occurs when the value of the CausesValidation property changes.

(Inherited from Control) ChangeUICues

Occurs when the focus or keyboard user interface (UI) cues change.

(Inherited from Control) Click

Occurs when the control is clicked.

(Inherited from Control) ClientSizeChanged

Occurs when the value of the ClientSize property changes.

(Inherited from Control) ContextMenuChanged

Occurs when the value of the ContextMenu property changes.

(Inherited from Control) ContextMenuStripChanged

Occurs when the value of the ContextMenuStrip property changes.

(Inherited from Control) ControlAdded

Occurs when a new control is added to the Control.ControlCollection.

(Inherited from Control) ControlRemoved

Occurs when a control is removed from the Control.ControlCollection.

(Inherited from Control) CursorChanged

Occurs when the value of the Cursor property changes.

(Inherited from Control) Deselected

Occurs when a tab is deselected.

Occurs before a tab is deselected, enabling a handler to cancel the tab change.

Occurs when the component is disposed by a call to the Dispose() method.

(Inherited from Component) DockChanged

Occurs when the value of the Dock property changes.

(Inherited from Control) DoubleClick

Occurs when the control is double-clicked.

(Inherited from Control) DpiChangedAfterParent

Occurs when the DPI setting for a control is changed programmatically after the DPI of its parent control or form has changed.

(Inherited from Control) DpiChangedBeforeParent

Occurs when the DPI setting for a control is changed programmatically before a DPI change event for its parent control or form has occurred.

(Inherited from Control) DragDrop

Occurs when a drag-and-drop operation is completed.

(Inherited from Control) DragEnter

Occurs when an object is dragged into the control’s bounds.

(Inherited from Control) DragLeave

Occurs when an object is dragged out of the control’s bounds.

(Inherited from Control) DragOver

Occurs when an object is dragged over the control’s bounds.

(Inherited from Control) DrawItem

Occurs when the TabControl needs to paint each of its tabs if the DrawMode property is set to OwnerDrawFixed.

Occurs when the Enabled property value has changed.

(Inherited from Control) Enter

Occurs when the control is entered.

(Inherited from Control) FontChanged

Occurs when the Font property value changes.

(Inherited from Control) ForeColorChanged

Occurs when the value of the ForeColor property changes.

Occurs during a drag operation.

(Inherited from Control) GotFocus

Occurs when the control receives focus.

(Inherited from Control) HandleCreated

Occurs when a handle is created for the control.

(Inherited from Control) HandleDestroyed

Occurs when the control’s handle is in the process of being destroyed.

(Inherited from Control) HelpRequested

Occurs when the user requests help for a control.

(Inherited from Control) ImeModeChanged

Occurs when the ImeMode property has changed.

(Inherited from Control) Invalidated

Occurs when a control’s display requires redrawing.

(Inherited from Control) KeyDown

Occurs when a key is pressed while the control has focus.

(Inherited from Control) KeyPress

Occurs when a character. space or backspace key is pressed while the control has focus.

(Inherited from Control) KeyUp

Occurs when a key is released while the control has focus.

(Inherited from Control) Layout

Occurs when a control should reposition its child controls.

(Inherited from Control) Leave

Occurs when the input focus leaves the control.

(Inherited from Control) LocationChanged

Occurs when the Location property value has changed.

(Inherited from Control) LostFocus

Occurs when the control loses focus.

(Inherited from Control) MarginChanged

Occurs when the control’s margin changes.

(Inherited from Control) MouseCaptureChanged

Occurs when the control loses mouse capture.

(Inherited from Control) MouseClick

Occurs when the control is clicked by the mouse.

(Inherited from Control) MouseDoubleClick

Occurs when the control is double clicked by the mouse.

(Inherited from Control) MouseDown

Occurs when the mouse pointer is over the control and a mouse button is pressed.

(Inherited from Control) MouseEnter

Occurs when the mouse pointer enters the control.

(Inherited from Control) MouseHover

Occurs when the mouse pointer rests on the control.

(Inherited from Control) MouseLeave

Occurs when the mouse pointer leaves the control.

(Inherited from Control) MouseMove

Occurs when the mouse pointer is moved over the control.

(Inherited from Control) MouseUp

Occurs when the mouse pointer is over the control and a mouse button is released.

(Inherited from Control) MouseWheel

Occurs when the mouse wheel moves while the control has focus.

(Inherited from Control) Move

Occurs when the control is moved.

(Inherited from Control) PaddingChanged

Occurs when the control’s padding changes.

(Inherited from Control) Paint

This event is not meaningful for this control.

Occurs when the Parent property value changes.

(Inherited from Control) PreviewKeyDown

Occurs before the KeyDown event when a key is pressed while focus is on this control.

(Inherited from Control) QueryAccessibilityHelp

Occurs when AccessibleObject is providing help to accessibility applications.

(Inherited from Control) QueryContinueDrag

Occurs during a drag-and-drop operation and enables the drag source to determine whether the drag-and-drop operation should be canceled.

(Inherited from Control) RegionChanged

Occurs when the value of the Region property changes.

(Inherited from Control) Resize

Occurs when the control is resized.

(Inherited from Control) RightToLeftChanged

Occurs when the RightToLeft property value changes.

(Inherited from Control) RightToLeftLayoutChanged

Occurs when the value of the RightToLeftLayout property changes.

Occurs when a tab is selected.

Occurs when the SelectedIndex property has changed.

Occurs before a tab is selected, enabling a handler to cancel the tab change.

Occurs when the Size property value changes.

(Inherited from Control) StyleChanged

Occurs when the control style changes.

(Inherited from Control) SystemColorsChanged

Occurs when the system colors change.

(Inherited from Control) TabIndexChanged

Occurs when the TabIndex property value changes.

(Inherited from Control) TabStopChanged

Occurs when the TabStop property value changes.

(Inherited from Control) TextChanged

Occurs when the value of the Text property changes.

Occurs when the control is finished validating.

(Inherited from Control) Validating

Occurs when the control is validating.

(Inherited from Control) VisibleChanged

Occurs when the Visible property value changes.