Главная » Linux

Top853 driver для windows

Содержание
  1. Top853 driver для windows
  2. Top853 driver для windows
  3. OpenECU — Блог автомобильной электроники
  4. Чип тюнинг и доработки двигателя
  5. Прямой эфир
  6. Блоги
  7. Универсальный программатор микросхем EEPROM — TOP853 USB

Top853 driver для windows

The TOP853 Universal USB Programmer

I bought one of these from China off ebay.uk to program a GAL16V8, but it also supports a large range of PROMs, PICs, PLDs etc.

Specifications (- from a typical eBay advert)

Supports 5V devices, using USB (500mA) power source, does not need an external power supply

Transmission speed 12MHz/s via USB.

Current protection function, effectively protects the programmer and devices.

USB load testing (0 to 10 levels)

Device’s connection inspection, inspect every pins’ connection of the device

40 pin DIP self-locking socket

Works with WINDOWS98SE/ME/2000/XP

Small size and weight, 142 x 103 x 263 mm, 250g

Supports more than 1000+ devices from AMD, CATALYST, FUJITSU, HITAVHI, ST, MICROCHIP, NEC, NS,OKI, SONY, TI, TOSHIBA, WLSI, AMIC, ATMEL, INTEL etc.

NB : Depending on which ebay shop you use, you may find some discrepancies in the advertised specifications!

Make sure you know what you’re getting before you click

Not all of the adverts on ebay make it clear what devices the TOP853 USB programmer is compatible with, there is often a list or hyperlink to a huge range of programmable ICs, such as the link above, but some adverts describe this programmer as supporting 5V devices, others say that it only works with 5V devices and others make no mention of the programming voltages supported at all.

I’m not sure how they can get away with, or example, saying that the programmer «Support 5V device only«, then stating that it supports devices that require much higher voltages to program (but not to read) them. Other adverts state that the device can be powered from «USB or Power Cable», in fact, the same wording is printed on the back of the programmer — however, the TOP853 is USB only! There is no external power input, though there is a header on the PCB that you could connect to if required.

Programming Voltage & Write Speed (Delay)

When I bought the programmer, although I wanted to read some 2764 EPROMs, I did not give much thought to actually programming them. It was only after I had a few failed attempts writing a program to an EPROM that I gave any real thought to the programming voltage. Using the default setup in the TopWin program, selecting a NEC2764D EPROM and trying to write to the chip, the write phase would fail every time, at the same point, (address 0176h).

Older NMOS EPROMs, such as the NEC D2764, have relatively high programming voltages, for the D2764 it is

21 VDC, newer, CMOS devices such as the 27C64 are compatible with an older 2764, but use a lower programming voltage,

Given that USB power is 5VDC, for the programmer to be able to program devices such as the 2764, the programmer would require an internal voltage «step-up» circuit, perhaps using a DC-DC switching regulator such as a TI LM27313+. Since USB 2.0 has a current limit per port of 500mA, the available power for operating the programmer and writing to the EPROM is pretty limited. I originally thought that it was likely to be a power problem, that the TOP853 could not generate the required voltage with enough current from the USB port. The TopWin PDF help file is pretty much unreadable, like may «English» manuals that accompany Chinese electronic goods, it’s written in Chinglish! I did find a section in the Introduction that appeared to advise that the programmer could not program 27 series EPROMs though the USB port as it needed more than 500mA. I tried using one of these USB «Y» cables that are intended to provide additional power for external hard drives — which did not appear to help.

(+Update: I opened up my TOP853 and found that there is a 34063AP1 DC/DC Converter installed.)

My next thought was that since the device did look like it had started to write the program — getting as far as 0176h, I started to wonder if there was some sort of buffer overflow or write speed issue at work. I had not realised it, but under the Config Tab, there is a setting called «Delay«, I take this to be the delay between the programmer writing to consecutive addresses, it was originally set as 100us. After doing some «tuning» of this parameter, I found that I could write to the 2764 with a Delay setting of 1ms. Again, if you can wade through the Chinglish manual, it seems to recommend a write speed of 2-20ms

Читайте также:  Linux bash file line by line

Whilst it does work, I’m not sure that using a programmer with a potentially low programming voltage can be good for the long term reliability of the EPROM, if I were blowing EPROMs for critical applications, I would upgrade to a better quality programmer, but for hobbyist use, I plan on sticking with the TOP programmer at the moment.

Software — Windows 7 x64

So, now that I am reasonably with the capability of the TOP853, the biggest outstanding issue is that current versions of the TopWin6 software do not support 64 Bit Windows 7, so, I either have to run the Software in Windows XP Mode or on a XP laptop. However, I recently came across this information from hondaville.com which describes how to get the programmer to run under Windows 7.

Replace the files:

They just seem to be using too old of files for it to work on windows 7.

I have read you need to slow down usb speed. From what i can tell it is on old versions of the top583. If you need to do this, you might have a setting in your computers BIOS to change the usb to 1.1, if this is not a option to you then you will need to run a USB v 1.1 HUB.

I have not tried this myself yet, but certainly will the next time I use the programmer, it may be that the «fix» is for Windows 7 x32 and may not work under x64.

18/08/2015 Update

I never got around to trying this, but I have been advised that the hondaville site links are broken, you can download the files from the links in the table below. Please let me know if the «fix» works for you and if so, with which version(s) of Windows 7.

I have had a couple of reports that the «fix» doesn’t work, but I will leave the file here just in case it is useful to anyone.

Top853 driver для windows

Programmer Software Download

Title Last Update # Downloads # Description Download Link
GQ Blaster 1.10 Jun-16-2017 23524 The GQBlaster software is designed for GQ-5X NAND programmer and GQ-5X SPI programmers. USB driver use Signed GQ USB 2.01 driver below.

To get fully functional software, the software needs registration and activation code.

Old Revision Software and Revision History
Re 1.09 More chips added. Improved Smart-Copy algorithm.

Re 1.08 Improved Smart-Copy algorithm.
Re 1.07 Fixed a display bug.
Re 1.06 Added Smart Copy feature
Re 1.05 added a new algorithm for creating target file. like TV chip copy image data file.
Re 1.04, Added Bad Block Table analysis and Advanced copy feature. June-19-2016

Re 1.03 ID 6 byte ID chip supported Dec-2015
Re 1.02 Implement verify with NAND Standard.Sep-2015
Re 1.01 Auto detect number of CE pin, Fix bug in large chip programming.Aug-2015
Re 1.00 USB driver 3.0 supported. Apr-2015
Re 0.8 Initial release. Aug-2014

Mac/iOS version software packages:
Mac Software:GQ Blaster For Mac

Download here
GQUSBprg 7.27 Oct-08-2020 50762 This software is for latest GQ-4X V4( GQ-4×4 ) universal programmer only.

It needs USB driver 3.0 to be installed first.

This software does NOT work on older version GQ-4X.

The newer version GQ-4×4 has two beep sounds from programmer when it is power on.

The software works on Windows XP,Vista,7,8,8.1,10.
Re 7.27 Fixed 27C010,020,040 ID read issue.
Re 7.26 Fixed AM29F016B PSOP44 chip.
Re 7.25 Fixed Script read error, fixed PIC16F886, added S29AL004D
Re 7.20 Added OneWire protocol chip support, such as DS2431. More other chips updates.
Re 7.18, 27C4096,PIC chips update.
Re 7.11, fixed with ADP-054, 27C1024,27C160 unstable issue.

Re 7.07B, fixed PIC chip missing .dev file issue.

 Download here
GQ USB Driver 3.0 for GQ-4X V4(GQ-4×4),GQ-5X Sep-27-2015 40551 This is GQ-4X V4 (Known as GQ-4×4 )USB driver, it works on Windows XP, Vista, 7, 8, 8.1, 10 etc.

This driver does not work on older version GQ-4X.

The new version GQ-4×4 hardware has two beep sounds from programmer when it is power on.

For specific Window version driver only:

  • Win 10 32 bit
  • Win 10 64 bit OR Installer in .exe (Need to run as Administrator)
  • Win 8.1 64 bit
  • Win 8.1 32 bit
  • Win 8 64 bit
  • Win 8 32 bit
  • Win 7 64 bit OR Installer in .exe(Need to run as Administrator)
  • Win 7 32 bit
  • Win Vista 64 bit
  • Win Vista 32 bit
  • Win XP 64 bit
  • Win XP 32 bit
    		•  Download here
    GQUSBprg 6.38 Sep-27-2015 129816 For True USB Willem Programmer GQ-3X(except Re1.00), GQ-4X, works on Windows 2000,XP,Vista,Windows 7 for both 32bit and 64bit Windows system.

    Latest update:

  • 6.38 updated support list, chip location graphic (Thanks to Jorge Miguel Preto
    ).
  • 6.37 updated M35080VP,M35080V6 first sector writing.
  • 6.36 Fixed M35080VP,M35080V6. Added ST 0DODOWQ.
  • 6.31 fixed 32 bit Hex address issue.Added more devices.
  • 6.30 fixed Win 8.1 right panel display issue.
  • 6.21. Voltage diagnostic bug fixes.
  • 6.20. Devices list update Revision History Here
    		•  Download here
    GQ-4×4 USB Programmer User Guide Jan-06-2017 9019 User guide for GQ-4×4 USB programmer Download here
    GQ-4X USB Programmer User Guide Re4.11 2015 35734 User guide for GQ-3X, GQ-4X USB programmer

    		 Download here
    GQ-5X Quick Start Guide Sep-27-2015 2562 The user quick start guide is for GQ-5X programmer. Download here
    GQ USB 2.01 driver for GQ-4X May.-16-2015 15204 This driver is for all Windows XP, Win7. If your Windows is Win 8/8.1, Win 10, then you need to use Signed Re2.01 driver. OR you may need to disable the signature enforcement. See:

    		 Download here
    Signed GQ USB 2.01 driver for GQ-4X, GQ-5X 07-10-2015 16526 This is a Signed version driver for Win 8/8.1, Win 10.

    Thanks to GB who provided this signed driver.

    		 Download here
    GQUSBprg Old 5.03 software. July-2010 13119 GQ-3X, GQ-4X old Re.5.03B software.

    We strongly suggest you to use the latest software since the old software always have major bugs.

    		 Download here
    GQ Blaster for iOS/Mac Mar-08-2019 710 Mac/iOS version software packages for GQ-5X NAND and SPI programmer.
    Include following files:
    Mac Software:GQBlasterMac.tar
    Support files:Frameworks.tar
    USB Driver:libusb.tar
    Installation Instructions:Readme.txt

    		 Download here
    Linux version GQ Blaster 1.10 Jun-9-2018 1134 Linux version software for GQ-5X NAND and SPI programmer.

    		Download here
    port95nt.exe Oct-01-2005 7610 For Re0.97i+ or Reo.97g software install on WIN2000 and WinXP Download here
    JBC convertor Feb-24-2012 3802 Convert the JTAG CPLD JAM stapl file to JBC file.

    The JBC file is recognized by GQ-4X software.

    OpenECU — Блог автомобильной электроники

    Чип тюнинг и доработки двигателя

    Прямой эфир

    info 2 апреля 2021, 22:04

    info 2 апреля 2021, 22:04

    info 2 апреля 2021, 22:04

    info 2 апреля 2021, 22:04

    info 2 апреля 2021, 22:04

    info 15 марта 2021, 12:11

    info 15 марта 2021, 11:35

    info 28 декабря 2020, 17:48

    info 28 ноября 2020, 19:35

    info 25 октября 2020, 10:57

    info 16 октября 2020, 12:04

    info 8 октября 2020, 13:20

    info 1 октября 2020, 14:25

    info 17 сентября 2020, 17:30

    info 15 сентября 2020, 15:39

    info 10 сентября 2020, 18:54

    info 3 сентября 2020, 16:01

    info 20 августа 2020, 14:08

    info 13 августа 2020, 15:04

    info 6 августа 2020, 12:43

    Блоги

    • BMW2.35
    • VAG: Audi, Volkswagen, Skoda, Seat2.34
    • Автохимия. Как правильно ухаживать за автомобилей1.24
    • Opel (Opel, Vauxhall)1.21
    • Autocom CDP / Delphi. Все о программе Autocom и Delphi1.21
    • Чип тюнинг и доработки двигателя1.21
    • Subaru: чип-тюнинг, ремонт, обслуживание1.21
    • Сканматик (все оборудования бренда)1.21
    • Honda (Honda, Acura)1.13
    • Toyota, Lexus0.00

    Универсальный программатор микросхем EEPROM — TOP853 USB

    Универсальный программатор «TOP853 USB» — оптимальный выбор специалистов по ремонту и сервисному обслуживанию персональных компьютеров, бытовой и автомобильной электроники, разработчиков и производителей электронных устройств, использующий высокоскоростной USB порт, высокой надежности и не использует внешнего электропитания.


    Характеристики    :

    • Скорость передачи данных по USB: 12 Мб / с.
    • Встроенная функция защиты. (предохраняет программатор и микросхемы)
    • Проверка загрузки USB (от 0 до 10 уровня)-
    • Разъем: 40-пиновый с замком.
    • Поддержка ОС: Windows 98, SE, 2000, XP.
    • Примечание: Скорость программирования зависит от скорости работы процессора ПК.

    Поддерживаемых микросхем более чем 1000, в частности AMD, CATALYST, FUJITSU, HITAVHI, ST, MICROCHIP, NEC, NS,OKI, SONY, TI, TOSHIBA, WLSI, AMIC, ATMEL, INTEL
    EPROM
    2716-12.7V, 2716-21V, 2716-25V, 2732-12.7V, 2732-21V, 2732-25V, 2764-12.7V, 27C64-12.7V,
    2764-21V, 2764-25V, 27128-12.7V,P27, 27C128-12.7V,P27, 27128-21V, 27256-12.7V,P27,
    27C256-12.7V,P27, 27512-12.7V,P27, 27C512-12.7V,P27, 27513-12.7V,P27, 27C513-12.7V,P27,
    27C010-12.7V,P27, 27C020-12.7V,P27, 27C040-12.7V,P27, 27C080-12.7V,P27, 27C801-12.7V,

    EPROM-AMD
    Am2716-12.7V,P27, Am2716-21V, Am2716-25V, Am2732-12.7V,P27, Am2732-21V, Am2732-25V,
    Am2764-21V, Am2764A-12.5V,P27, Am27C64-12.5V,P27, Am2128-21V, Am27128A-12.5V, Am27C128-12.7V,P27,
    Am27256HV-21V, Am27C256-12.75V, Am27C256P-12.75V, Am27H256-12.75V, Am27512-12.75V,
    Am27512/L-12.75V, Am27C010-12.75V, Am27H010-12.75V, Am27HB010-12.75V, Am27C020-12.75V,
    Am27C040-12.75V, Am27C080-12.7V,

    EPROM-ATMEL
    AT2716-12.7V,P27, AT2716-21V, AT2716-25V, AT2732-12.7V,P27, AT2732-21V, AT2732-25V,
    AT27HC64-12.7V, AT27HC64L-12.7V, AT27C128-12.7V, AT27C256-12.7V, AT27HC256-12.7V,
    AT27/HC256-12.7V, AT27C512-12.7V, AT27C512R-12.7V, AT27C513-12.7V, AT27C513R-12.7V,
    AT27C010/L-12.7V, AT27C011-12.7V, AT27C040-12.7V, AT27C080-12.7V,

    EPROM-CATALYST
    CAT2764A-12.7V, CAT27128A-12.7V, CAT27C128-12.7V,P27, CAT27C256-12.7V, CAT27512-12.7V,
    CAT27C010-12.7V, CAT27C210-12.7V,

    EPROM-FUJITSU
    MBM2716-12.7V,P27, MBM2716-21V, MBM2716-25V, MBM2732-12.7V,P27, MBM2732-21V, MBM2732-25V,
    MBM2764-21V, MBM27C64-21V, MBM27128-21V, MBM27C128-21V, MBM27256-12.7V, MBM27C256A-12.7V,
    MBM27C512-12.7V, MBM27C1000-12.7V, MBM27C1001-12.7V, MBM27C4001-12.7V, MBM27C080-12.7V,

    EPROM-GENERAL
    2716-12.7V,P27, 2716-21V, 2716-25V, 2732-12.7V,P27, 2732-21V, 2732-25V, 2764-21V,
    27C64-21V, 2764A-12.7V, 27C6A-12.7V, 27128-21V, 27128A-12.7V, 27C128-12.7V,P27, 27256,
    27C256, 27256HV-21V, 27512, 27C512, 27512HV-21V, 27513,P27, 27C513,P27, 27010, 27C010,P27,
    27011, 27C011,P27, 27101,P27, 27C101,P27, 27C020,P27, 27C040,P27, 27C080,P27,

    EPROM-HITAVHI
    HN27C64-21V, HN27128AG-12.7V, HN27128P-21V, HN27/C256,P27, HN27/C512,P27, HN27C101,P27,
    HN27C301,P27,

    EPROM-HYUNDAI
    27C64-12.7V, 27C128-12.7V, 27C256-12.7V, 27C512,P27, 27C010,P27, 27C020,P27,

    EPROM-ICT
    27CX256,P27, 27CX128,P27, 27CX256,P27, 27CX512,P27, 27CX010,P27, 27CX020,P27,

    EPROM-INTEL
    i2716-12.7V,P27, i2716-21V, i2716-25V, i2732-12.7V,P27, i2732-21V, i2732-25V, i2764-21V,
    i27C64-12.7V, i2764A-12.7V, i87C64-12.7V, i27128-21V, i27A128-12.7V, i27C128-12.7V,
    i27C256-12.7V, i87C256-12.7V, i27C512,P27, i27C010,P27, i27010,P27, i27010A,P27,
    i27020,P27, i27C040,P27, i27C080,P27,

    EPROM-MATSUSHITA
    27C256,P27, 27C128,P27, 27C256,P27, 27C512,P27, 27C010,P27, 27C020,P27,

    EPROM-MICROCHIP
    27C64-12.7V, 27C128-12.7V, 27HC256,P27, 27C512,P27, 27513,P27, 27C513,P27, 27C010,P27,
    27C020,P27,

    EPROM-MITSUBISHI
    M5L2764-21V,P27, M5L27C128-12.7V, M5M27128/K-21V, M5M27K-12.7V, M5MC256-12.7V, M5M27C512,P27,
    M5M27K512,P27, M5M27C100,P27, M5M27C101,P27, M5M27C102,P27, M5M27C201,P27, M5M27C401,P27,

    EPROM-MXIC
    MX2716-12.7V,P27, MX2716-21V, MX2716-25V, MX2732-12.7V,P27, MX2732-21V, MX2732-25V,
    MX27C256-12.7V, MX27C512-12.7V, MX27C1000-12.7V,

    EPROM-NEC
    D2716-12.7V,P27, D2716-21V, D2716-25V, D2732-12.7V,P27, D2732-21V, D2732-25V, D2764-21V,
    D27C64-12.7V, D27128-21V, D27/C256-21V, D27C256A-12.7V, D27C512,P27, D27C1000,P27,
    D27C1000A,P27, D27C1001,P27, D27C1001A,P27, D27C2001,P27, D27C4001,P27,

    EPROM-NS
    NM2716-12.7V,P27, NM2716-21V,P27, NM2716-25V, NM2732-12.7V,P27, NM2732-21V, NM2732-25V,
    NM27LC64-12.7V, NM27C256-12.7V, NM27LC256-12.7V, NMC87C257-12.7V, NM27LC512,P27,
    NM27LV512,P27, NM27P512,P27, NMC27C64,P27, NM27C128/B-12.7V, NMC27C128/B-12.7V, NMC27CP128-12.7V,
    NMC27C256-12.7V, NMC27C256B-12.7V, NM27C512,P27, NMC27C512,P27, NMC27C512A,P27, NMC27C010,P27,
    NMC27C020,P27,

    EPROM-OKI
    MSM2716-12.7V,P27, MSM2716-21V, MSM2716-25V, MSM2732-12.7V,P27, MSM2732-21V, MSM2732-25V,
    MSM2764A-12.7V, MSM2764AS-21V, MSM27128A-12.7V, MSM27128AS-21V, MSM27256AS-12.7V,
    MSM27512AS,P27, MSM271000,P27,

    EPROM-RICOH
    27C64-21V, 27C256-12.7V,

    EPROM-SEEQ
    DQ2764-21V,P27, DQ27128-21V, DQ27C256-12.7V,

    EPROM-SGS_THOMSON
    M27128A-12.7V, M27256,P27, M27CC512,P27, M27C1000,P27, M27C1001,P27, M27C2001,P27,
    M27C4001,P27,

    EPROM-SIGNETICS
    27C64A,P27, 27C128,P27, 27C512,P27, 27C210,P27,

    EPROM-SMOS
    27C64H,P27, 27128H,P27, 27C256H,P27,

    EPROM-SONY
    CXK27C256,P27, CXK27C512,P27,

    EPROM-TI
    TMS2564-25V,P27, TMS2764-21V,P27, TMS27C64-12.7V, TMS27PC64-12.7V, TMS27128-21V,
    TMS27C128-12.7V, TMS27CP128-12.7V, TMS27C256,P27, TMS27PC256,P27, TMS87257,P27, TMS27C512,P27,
    TMS27CP512,P27, TMS27C010,P27, TMS27PC010,P27, TMS27C020,P27, TMS27PC020,P27, TMS27C040,P27,
    TMS27PC040,P27,

    EPROM-TOSHIBA
    TMM2716-25V, TMM2732-21V, TMM2764-21V, TMM2764A-12.7V, TMM27128-21V, TMM27128A,P27,
    TMM27256A,P27, TMM27256AD,P27, TMM27512,P27, TC541000,P27, TC541001,P27, TC571000,P27,
    TC571001,P27, TC532000,P27, TC572000,P27, TC534000,P27, TC574000,P27,

    EPROM-VLSI
    VT2716-25V,P27, VT2732-21V,P27, VT27C64,P27, VT27C128,P27, VT27C256,P27, VT27C512,P27,

    EPROM-WSI
    WS2716-25V, WS2732-21V, WS27C512F,P27, WS27C64F,P27, WS57C64F,P27, WS27C128F,P27,
    WS57C128F,P27, WS57C128FB,P27, WS27C256F,P27, WS27C256L,P27, WS57C256F,P27, WS57C256FB,P27,
    WS27C512L,P27, WS27C010F,P27, WS27C010L,P27, WS57C65,P27, WS57C257,P27, WS57C210F,
    WS57C210L,

    EEPROM-AMD
    AM29C257, AM28F256, AM28F512, AM28F010/A, AM28F020/A, AM29F256, AM29F512, AM29F010,
    AM29F020, AM29F040, AM29F001, AM29F001, AM29F002, AM29F002, AM29F004, AM29F004,

    EEPROM-MACRONIX
    MX28F1000, MX28F2000, MX29F010, MX29F020, MX29F040, MX29F001T/B, MX29F002T/B, MX29F004T/B,

    EEPROM-ATMEL
    AT2816, AT2816A, AT28C16, AT2817A, AT28C17, AT2864A, AT28C64, AT28HC64, AT28C64X,
    AT28C64L, AT28PC64, AT28C64B, AT28HC64B, AT28C256, AT28C257, AT28C512, AT28C010,
    AT28C020, AT28C040, AT28C040A, AT28F256, AT28F257, AT28F512, AT28F010, AT28F020,
    AT28MC010, AT28C010, AT29C256, AT29C257, AT29C512, AT29C010, AT29C010A, AT29C020,
    AT29C040, AT29C040A, AT49F010, AT49F020, AT49F040, AT49F001, AT49F002, AT49F004,

    EEPROM-ACTRANS
    AC39LV512, AC39LV010, AC39LV020, AC39LV040,

    EEPROM-WINBOND
    W27E257, W27E512, W27E010, W27E020, W27E040, W27C257, W27C512, W27C010, W27C020,
    W27C040, W27F257, W27F512, W27F010, W27F020, W27F040, W28F256, W28F257, W28F512,
    W28F010, W28F020, W29EE010, W29EE011, W29EE012, W29C010, W29C020, W29C040, W49f001U,
    W49f002U,

    EEPROM-CATALYST
    CAT2816, CAT2816A, CAT28C16, CAT2817A, CAT28C17, CAT2864A, CAT28C64, CAT28HC64, CAT28C256,
    CAT28F512/I, CAT28F512V5/I, CAT28F010/I, CAT28F010V5/I, CAT28F020/I,

    EEPROM-DALLAS
    DS1220Y, DS1220AB, DS1220AD, DS1225AB, DS1225AD, DS1225D, DS1225DE, DS1225Y, DS1230Y,
    DS1230AB, DS1245Y, DS12449, DS1250Y,

    EEPROM-EXEL
    2816, 2816A, 28C16, 2817A, 28C17, 2864A, 28C64, 28HC64, 28C256,

    EEPROM-FUJITSU
    2816, 2816A, 28C16, 2817A, 28C17, 2864A, 28C64, 28HC64, 28F256, 28F512, 28F010/A,
    28F020/A, 29F010, 29F020, 29F040, 29F001T/B, 29F002T/B, 29F004T/B,

    EEPROM-HITACHI
    HN58C65, HN58C66, HN58C256, HN58C256A, HN58C257, HN58C1001,

    EEPROM-INTEL
    i2816, i2816A, i28C16, i2817A, i28C17, i2864A, i28C64, i28HC64, i28F256A, i28F256,
    i28F512, i28F010, i28F020, i28F040, i28F001BX-T, i28F001BX-B, i28F002BX-T, i28F002BX-B,
    i28F004BX-T, i28F004BX-B, i28F008BX-T, i28F008BX-B, i28F200BX-T, i28F200BX-B, i28F400BX-T,
    i28F400BX-B, i28F800BX-T, i28F800BX-B,

    EEPROM-ISSI
    IS28F010, IS28F020,

    EEPROM-MICROCHIP
    2816, 2816A, 28C16, 2817A, 28C17, 2864A, 28C64, 28HC64,

    EEPROM-MITSUBISHI
    2816, 2816A, 28C16, 2817A, 28C17, 2864A, 28C64, 28HC64, M5M28F101P, M5M28F102P, M5M28C64A,

    EEPROM-NEC
    2816, 2816A, 28C16, 2817A, 28C17, 2864A, 28C64, 28HC64, 28C256,

    EEPROM-OKI
    2816, 2816A, 28C16, 2817A, 28C17, 2864A, 28C64, 28HC64,

    EEPROM-SAMSUNG
    2816, 2816A, 28C16, 2817A, 28C17, 2864A, 28C64, 28HC64,

    EEPROM-SEEQ
    2816, 2816A, 28C16, 2817A, 28C17, 2864A, 28C64, 28HC64, 28C256/A, 28C010,

    Читайте также:  Стандартный браузер для windows 10
    Оцените статью
    © 2024 Советы по настройке компьютера