Установка Pascal на mac os
Установка Mac OS X на Mac Pro 2.1
Доброго всем времени суток! Ситуация: накрылся системный диск, купил новый, отформатировал на.
Pascal на MAC OS
по учебе нужно программировать в паскале но у меня мак бук про 2012 как можно поставить паксаль на.
установка MAC OS
решил установить Mac.OS.X.10.7.Lion.(Intel) вроде что то начало грузится я начал ждать 5 часов.
Установка Mac OS
Добрый день, обращаюсь за помощью. Досталась на днях машинку Macbook A1181, жесткий диск убит.
Можно и без досбокса.
Установите Free Pascal (он же FPC, Free Pascal Compiler):
https://www.freepascal.org/dow. ungary.var
Чтобы FPC работал корректно, выполните рекомендации по установке, указанные на странице загрузки.
Или лучше сразу установите Lazarus (включает в себя среду программирования, очень похожую на Delphi, и FPC):
https://www.lazarus-ide.org/in. =downloads
Перед установкой обязательно прочтите скачанный Вами README.txt.
Вместо README.txt лучше вот это почитать:
Руководство по установке Lazarus:
http://wiki.freepascal.org/Ins. on_MacOS_X
Советы по программированию в Lazarus:
http://wiki.lazarus.freepascal. mming_Tips
Помощь в написании контрольных, курсовых и дипломных работ здесь.
Установка Windows на Mac
У меня следующий вопрос, можно ли на Mac установить нелицензионную Windows и как?
Установка Mac OS X Leopard на HP
Подскажите, пожалуйста, как правильно поставить MAC OS X Leopard на HP Pavilion dv7? Установка.
Установка Mac OS на VirtualBox
Решил попробовать установить Mac OS на виртуалку. При запуске на установку появилось командная.
Установка Mac OS на virtualbox
Всем привет, никак не могу поставить Mac OS, возможно у меня ноут не подходит, так как я уже много.
Установка Mac OS X Tiger 10.4 на РС
Доброго всем дня! Все уже слышали о совместимости новой операционной системы Tiger 10.4 с.
PyQt на MAC OS — установка
Друзья, подсобите ссылкой. Не могу найти понятной пошаговой инструкции по установке PyQt на MAC. С.
Источник
free pascal
Open source compiler for Pascal and Object Pascal
General
Coding
Tools
Search
Free Pascal on the Macintosh
Welcome to the FreePascal on the Macintosh page. Here is information especially for you who want to write a program for the Macintosh.
The download statistics indicate that the snapshots below are still downloaded a lot. Note that all fixes from those snapshots are also in the official release of FPC 2.2.2 (and will be also in later versions, when they become available), which was released in August 2008. Since FPC 2.2.2 also contains many additional fixes, we recommend you to use that version. It is available from the regular download pages.
There are some errors in the new linker shipped with Xcode 3.0/Mac OS X 10.5. A detailed overview was posted to the fpc-pascal mailing list. We have worked around most of those issues and created (stable) development snapshots for both PowerPC and Intel. These are intended to be installed on top of the 2.2.0 release version. Future releases will have these fixes incorporated.
One linker bug cannot be completely worked around in the compiler, which is related to the Stabs debugging format. For this reason, we recommend to switch to the Dwarf debugging format on Mac OS X 10.5. On the command line, you can do this by using -gw instead of -g to generate debugging information. In the Xcode projects, add -gw at the end of the FPC_SPECIFIC_OPTIONS project setting for the Debug configuration.
Regular snapshots of FPC 2.1.1 (both for PowerPC and for Intel — the latter denoted as i386) are now generated by and available from the Lazarus team.
If you only need the compiler (to either use it from the command line or from Xcode), you only have to download and install the «fpc» package.
Version 2.0.2 that was released a few weeks ago has all fixes and improvements of the 2.1.1 snapshot that was here (like Mac Pascal style objects and creation of dynamic libraries). Additionally, it doesn’t suffer from the installation problems the 2.1.1 snapshot installer had. Get the release here.
The 2.1.1 snapshot that was here is no longer available.
If you really need to be up to date with FPC, please consider using Subversion, and build the compiler by your self.
Some changes:
- No more «_main» symbol in the system unit (so can link with C main programs)
- Shared library creation support under Mac OS X
- Several bugfixes related to overflow checking on PPC
2005-06-29:
There is now a wiki page covering porting issues, from traditional mac pascals to FPC.
A FPC 2.1.1 snapshot is available here (10.8 MB, does not include the PDF documentation). It includes:
- Support for Macintosh Object Pascal in Macpas mode (includes support for mixing in Delphi-style OOP programming in Macpas mode, except that you have to use «object» instead of «class» everywhere — all occurrences of «class» are simply internally replaced by the _OBJECT compiler token)
- Fixed bug which caused stack corruption in procedures receiving floating point parameters and parameters on the stack (only if the caller side was compiled by FPC)
- Fixed bug in overflow checking of integer operations (some calculations were buggy if overflow checking is turned on, which is the case in the default development building style of Xcode if you use the integration kit)
- Fixed bug in division of unsigned numbers > $7fffffff by a power of 2
Should you desire to do so, you can switch back to 2.0 by simply installing the 2.0 package again.
At last . Free Pascal 2.0 is released for Mac OS X and classic Mac OS, as well as for other targets.
This means Free Pascal for the mac is not considered beta anymore. Get it on one of the mirror download sites.
Источник
Как установить PASCAL на MAC
Как установить Mac OS на Mac
Накрылся жесткий диск с осью. Теперь не знаю как установить на новый диск. Есть образ диска .dmg.
не могу установить на Mac Pro — Mac Os X server 10.6
Всем привет. помогите пожалуйста не могу установить на Mac Pro — Mac Os X server 10.6 как.
Как установить Apple Mac OS
Скачал образом Apple Mac OS. А как его установить?
Как установить mac os на VMware
хочу поставить на виртуалку mac os 10.6 — но в описании установки надо выбрать параметр cpu для.
Xcode 5+ compatibility (OS X 10.8/10.9)
FPC 2.6.2 is qualified for use with Mac OS X 10.4 till OS X 10.9. Xcode 5 and later however no longer install the command line tools by default, which are required by FPC. To install them manually, open «/Applications/Utilities/Terminal», execute xcode-select —install and choose «Install». Afterwards, FPC will function correctly.
Помощь в написании контрольных, курсовых и дипломных работ здесь.
Как установить MAC OS на стороннее железо
Всем доброго времени суток. Имеется в наличии ноутбук MSI GT680r-068UA, очень бы хотелось.
Как установить MAC OS на ВМ?
Всем доброго времени суток! Помогите, пожалуйста установить MAC OS X на ВМ. Уже второй день сижу и.
Как установить GTK+ на mac os?
Всем доброго времени суток, я немного освоил Си и теперь, хотел бы прикрутить GTK+ опыта совсем.
Как установить постоянный MAC-адрес?
Ребят правда не знаю какой линукс у меня но помоему ALT понял я это когда нужно было установить.
Как установить mac os на Acer Aspire 5520g
У меня на Acer Aspire 5520g при установке загвоздка на форматировании винта, дисковая утилита его.
Как установить маршрутизатор DIR-320 на Mac OS
Добрый вечер! Помогите пожалуйста разобраться как установить DIR-320 на Mac OS X 10.5.8. Вставляю.
Источник
nvgrw / TP_Mac_Setup.markdown
TurboPascal on Mac
Note: probably 99% of this tutorial (excluding installation and folder structure) is DOSBox- and not Mac-specific. As long as your computer can run DOSBox you should be able to convert the steps to work on Windows.
1. Downloading & Installing DOSBox
DOS apps don’t run natively on OS X, so we use DOSBox to emulate DOS for us.
1a. Downloading DOSBox
Navigate to the official DOSBox download page and select the latest Mac OS X version (at the time of writing this is for DOSBox 0.74). It will kick you over to SourceForge where your download will start after a couple of seconds.
1b. Installing DOSBox
Go to where you saved the DOSBox disk image to (for me it’s the Downloads directory) and double click it to mount it.
Finder should automatically reveal the contained filesystem, however if it doesn’t just double click the appropriate icon in the Finder sidebar.
If you want more details on how DOSBox works, feel free to open the ReadMe.txt file, but for now just drag the DOSBox.app into your /Applications directory. If you are having trouble finding this, just click the Finder icon in your Dock, hit ⌘⇧G, enter /Applications in the modal that appears and then press ⏎ (Return).
2. Downloading & Installing TurboPascal
Without TurboPascal we’d just have a DOS terminal. Such fun.
2a. Downloading TurboPascal
Because TurboPascal is so old, it was actually quite difficult finding the binaries for it. These from borlandc.org work for me but if you have different binaries that you’d prefer using then go right ahead.
2b. Installing TurboPascal
To use TurboPascal we need to «install» it. You could use any location on your filesystem for TurboPascal but I tend to place these things in my home directory so I can find them easily.
But first, extract the pascal.zip that you downloaded from borlandc.org. The resulting directory should be called TP . I renamed it to TurboPascal because that way it’s easier to know what it is. On UNIX-like systems the home directory is where everything specific to you goes. The path varies from Mac to Mac, depending on your setup (my home directory is on a separate hard drive), so if you don’t know where your home directory is: move the focus to Finder (by selecting Finder in the Dock) and press ⌘⇧G. In the resulting modal, just enter
and press ⏎ (Return).
Copy or cut your TurboPascal over to your home directory, such that the resulting path is
/TurboPascal . This’ll be important later.
3. Setting up DOSBox with TurboPascal
3a. Mounting and setting up a filesystem
Now that TurboPascal is installed, it’s time to fire up DOSBox. 
You’ll have to «mount» your current Mac filesystem by assigning it to a drive letter.
First we’ll mount TurboPascal. I chose A as the drive letter, but you could choose anything. for any of the following, type only what is after the > sign
Next we’ll mount the rest of our home directory so that we can open and save a file within TurboPascal. You can also mount a specific directory if you’d prefer not navigating a large file tree.
The first of these commands mounts your home directory (
) as the C drive. The second changes the current drive to your home directory. We’ll change the working directory of TurboPascal so that navigating the file structure isn’t such a pain and so that all files TurboPascal generates for your project stay in one location. Alternatively you could also mount C / , but this is not recommended (you don’t want to give an ancient operating system permission to potentially overwrite OS X).
Where you place your projects is up to you. I ran these commands to create a directory within my home directory dedicated to Pascal projects:
3b. Running TurboPascal
This tutorial assumes your current directory is C:\PASPRO .
You have several choices now. You can either use the «blue window» TurboPascal that we use at College or you can use an external editor. I’ll cover both.
3b-i. Using «blue window» TurboPascal
To start «blue window» TurboPascal, run the following:
Actually we’re not quite done yet: you may notice that you can’t move your mouse cursor. I’ve found that double clicking the blue area of the window makes DOSBox capture your mouse cursor, but if it does not you may need to press CTRL+F10 (CTRL+Fn+F10 if F10 mutes your Mac). Performing this shortcut again releases the mouse as well.
Now you can write code 😀
You’ll also find all your code and .exe files in
3b-ii. Using an external editor
If you’d prefer using an external editor such as GitHub Atom or Sublime Text (use 3, it supports Pascal highlighting) then… follow along.
Make changes to your .PAS files with your editor of choice. When it comes to running, you will have to invoke the compiler manually.
In this case HIWORLD refers to your code file, HIWORLD.PAS (or whatever it may be). The compiler is smart enough to know that they end in .PAS and will compile it to a .EXE file called HIWORLD.EXE .
If it compiles successfully you’ll see something like this:
If it doesn’t, the output will usually tell you the error and the line it ocurred on.
Assuming you have compiled your program in a similar matter, you can run your application without adding .EXE to the end.
Extra bits and bobs
I actually tend to create small batch files that compile the program and then run it. One of these may be called CR.BAT (CR = Compile Run) and look like this.
If you have this kind of setup you can edit your code and compile+run it by just running CR .
4. Automating your setup
Of course you don’t want to type all these things every time you start DOSBox. If you want your DOSBox to launch just like it does at College you’ll have to add the commands you wish to run to the DOSBox configuration file.
The file we’ll be editing is
/Library/Preferences/DOSBox 0.74 Preferences you can either directly edit it by opening a terminal and typing
or you can click Finder in the dock, press ⌘⇧G, enter
/Library/Preferences , press ⏎ (Return), and double click the file entitled DOSBox 0.74 Preferences .
Once you’ve opened the DOSBox configuration file, scroll to the bottom to find [autoexec] and add your startup lines below this.
If you’ve followed the tutorial fully, something like this will make DOSBox mount the correct directories, change directory to our project directory ( PASPRO ), and finally execute TPX , the TurboPascal Integrated Development Environment (IDE).
5. That’s it. Write some programs.
Thanks for reading. Hopefully it helped those who couldn’t get TurboPascal running on their Mac (or on Windows).
Источник
