How to Disable Windows Defender Firewall on Windows 10

Windows Defender Firewall is a proprietary data screening feature that was introduced by Microsoft with Windows XP and has continued on to improve ever since. Each iteration packs new improvements that are tailored to protect you against malware and other security problems that the internet entails.

But it can also prevent you from making certain network changes or block the connection privileges of some apps on your Windows 10 PC. If you wish to disable Windows Defender Firewall on Windows 10 for whatever reasons (and are aware of the associated risks), here is how you can do it via Control Panel and Command Prompt.

How to turn off Windows Defender Firewall using Control Panel:

1. Open the Start menu and type control panel in the search bar. Click on the Control Panel app to proceed.
   
2. Select the System and Security tab in the Control Panel.
   
3. Click on Windows Defender Firewall to open the menu and continue the disabling process.
   
4. This menu would inform you whether private or public networks are connected to the Firewall. Click on the Turn Windows Defender Firewall on or off option that is present in the middle-left corner.
   
5. Since the Firewall is active on the Public Network here, only the Public Network settings need to be changed or you can change both the settings if your network connections vary from time to time. Simply select Turn off Windows Defender Firewall and click OK.
   
6. Windows will prompt you with a confirmation that the Firewall has been turned off for your PC.
   

Disable Windows Defender Firewall using Command Prompt:

You can also harness the potential of Command Prompt to turn off Windows Firewall on your Windows 10 PC:

1. Open the Start menu and type cmd in the search bar. Click on the Command Prompt app to proceed.
   
2. In order to check the current status of the Windows Firewall on your PC, type the command below and press Enter to generate a detailed status report of the Firewall.

Netsh Advfirewall show allprofiles

Now to turn off the Windows Firewall entirely, type the below command and press Enter to disable the Windows Firewall.

NetSh Advfirewall set allprofiles state off

The system will provide you with a confirmation once the changes have been successfully made.

If you wish to enable the Windows Firewall on your PC again, all you have to do is type the command below and press Enter to revert the changes that you had made previously:

NetSh Advfirewall set allprofiles state on

Please note that turning off the Windows Defender Firewall on Windows 10 can grant you command over the data packets sent and received, which allows you to monitor and customize the influx of data yourself. But there are security risks attached to it because your system is now vulnerable to malware and other kinds of threats. It is not recommended to disable your Firewall and even if you do then make sure you either have a backup or you turn it on after your task is completed.

Отключаем фаервол в Windows 10 различными способами

Firewall или брандмауэр – это программа, которая создана для защиты ПК от хакерских атак через локальную сеть или интернет. Она анализирует весь входящий и исходящий трафик и, в случае необходимости, блокирует его. В основном отключение фаервола не требуется. Он работает стабильно и не мешает пользователю всплывающими уведомлениями. Однако если брандмауэр блокирует установку, запуск программы или проверенный сайт, то его можно отключить несколькими способами.

Отключаем firewall в Windows 10 с помощью командной строки

Фаервол выключить можно несколькими способами: через консоль cmd, Панель управления, службы. Самым простым является первый способ. Если вас интересует, как отключить фаервол в Windows 10 через командную строку, стоит выполнить следующее:

• Откроется консоль. Вводим «netsh advfirewall set allprofiles state off», кликаем «Enter».

• Фаервол или брандмауэр отключен.

Чтобы включить защитника обратно, стоит в командной строке ввести «netsh advfirewall set allprofiles state on».

Отключаем брандмауэр через Панель управления

Через Панель управления пользователь может включить и отключить многие компоненты Виндовс 10, в том числе и firewall. Для этого достаточно выполнить следующие действия:

• Жмём «Пуск», «Панель управления», «Система и безопасность», в меню слева выбираем «Включение и отключение брандмауэра Windows» (или выставляем режим просмотра мелкие значки и сразу выбираем нужный раздел).

• Откроется новый раздел. Выставляет отметки «Отключено».

ВАЖНО! Перед тем, как отключать брандмауэр, стоит установить антивирус стороннего разработчика.

Останавливаем работу фаервола полностью в Windows 10

Если отключив firewall через Панель управления или командную строку, защитник все ещё продолжает работать, стоит остановить саму службу. Именно она отвечает за работу firewall. Для этого следуем инструкции:

• Жмём «Win+R» и вводим «services.msc».

• Откроется новое окно. Ищем службу «Брандмауэр Windows». Двойным кликом открываем её.

• В небольшом окне выставляем «Отключено» (тип запуска) и «Остановлено».

• После отключения службы файрвол будет полностью остановлен.

Добавляем файл в исключение фаервола

Любой файл можно добавить не только в исключение антивируса, но и штатного брандмауэра. Для этого выполняем такие действия:

• Жмём «Пуск», «Панель управления», выбираем «Брандмауэр Windows». В меню слева выбираем «Разрешить взаимодействия с приложениями…».

• Откроется новое окно. Нажимаем на кнопку «Разрешить другое приложение». Опять появится окно. Указываем путь к программе. Также можно указать, для каких типов сетей она предназначена.

• Файл или программа внесена в исключения фаервола.

Отключаем дополнительные фаерволы в Windows 10

Если вы используете фаервол стороннего разработчика, к примеру, Comodo Firewall, отключить его можно следующим способом:

• Открываем окно программы. Возле пункта «Комплексная защита» выставляем отметку «Отключено».

• Далее открываем инструменты «Auto-Sandbox» и «HIPS» и также задаём значение «Отключено».

Данным способом можно на время отключить защиту. Если же вы хотите полностью удалить сторонний фаервол, рекомендуем воспользоваться разделом «Программы» в Панели управления.

О том, как отключить в Windows 10 штатный фаервол смотрите в видео:

How to enable or disable Windows Defender Firewall in Windows 10

When you install third-party security software, Windows 10 will automatically disable the built-in Windows Firewall. In case it does not, you may want to disable this Windows Defender Firewall manually.

Turn On or Off Windows Firewall in Windows 10

You can enable or disable the Windows Firewall manually using the following methods:

1. Using Windows Security
2. Using Control Panel
3. Using Command Prompt
4. Using PowerShell

1] Using Windows Security

Type Windows Security in the search box and hit Enter to open the Windows Security app. Click on Firewall & Network Protection to open the following panel.

You will see the Firewall status for the following network profiles:

1. Domain network
2. Private network
3. Public network.

It will be On or Off.

You may select to enable or disable it for anyone of the network profiles.

To disable the Firewall completely for all, click on each of the three, one after the other.

When you click on Public network, the following panel will become visible.

Toggle the Windows Defender Firewall switch to the Off position.

Do the same for Domain network and Private network as well.

You will see the changed status as follows.

To enable the Firewall, open Windows Security home page and click the Turn on button for Firewall.

Windows Defender Firewall will get enabled.

2] Using Control Panel

Open Control Panel > Windows Defender Firewall applet and in the left panel, click on Turn Windows Defender Firewall on or off, to open the following panel.

From the WinX Menu, select Control Panel > Windows Firewall.

Here you will see the settings to enable or disable Window Firewall on private as well as public networks.

You have two settings:

• Turn on Windows Firewall
• Turn off Windows Firewall (not recommended)

Under the former, you will see two options:

• Block all incoming connections, including those in the list of allowed apps
• Notify me when Windows Firewall blocks a new app.

Select your preferences and click OK and exit.

While the default Firewall settings are good for most of us, if you need to fine-tune it to meet your requirements, you will have to configure your Windows firewall properly.

Here you can make the necessary changes.

3] Using Command Prompt

Open an elevated command prompt and execute the following command to turn on Windows Firewall for all network profiles:

To turn it off for all, use:

4] Using PowerShell

Open an elevated PowerShell prompt and execute the following command to enable Windows Defender Firewall for all network profiles:

How to Disable the Windows Firewall in Windows 10, 8, 7, Vista and XP

Steps on how to disable the firewall in any version of Windows

The Windows Firewall is designed to help keep unauthorized users from accessing files and resources on your computer. A firewall is a must-have if you’re concerned about your computer’s safety.

Unfortunately, the Windows Firewall is far from perfect and can sometimes cause more harm than good, especially if there’s another firewall program installed.

Don’t disable the Windows Firewall unless you have a good reason, but if you have another security program performing the same functions, feel free.

Time Required: Disabling the Windows Firewall is easy and usually takes less than 10 minutes

There are separate directions below for Windows 10, Windows 8, Windows 7, Windows Vista, and Windows XP. See What Version of Windows Do I Have? if you’re not sure which steps to follow along with.

Disable the Firewall in Windows 10, 8, and 7

The steps for turning off the Windows Firewall in Windows 7 and newer versions of Windows is basically identical.

The screenshots in this section apply to Windows 10 only. Your screen will look slightly different if you’re using Windows 8 or Windows 7.

You can do this a number of ways, but the easiest method is to search for it in Windows 10 and 8, or select it from the Start menu in Windows 7.

Select System and Security.

That link is only visible if you have the «View by:» option set to «Category.» If you’re viewing the Control Panel applets in icon view, just skip down to the next step.

Choose Windows Firewall.

Depending on how your computer is set up, it might instead be called Windows Defender Firewall. If so, treat every instance of «Windows Firewall» below as if it read «Windows Defender Firewall.»

Select Turn Windows Firewall on or off on the left side of the screen.

A really quick way to get to this screen is via the control firewall.cpl command line command, which you can execute in Command Prompt or the Run dialog box.

Select the bubble next to Turn off Windows Firewall (not recommended).

You can disable the Windows Firewall for private networks only, just for public networks, or for both. To disable it for both network types, you have to make sure to select Turn off Windows Firewall (not recommended) in both the private and the public section.

Select OK to save the changes.

Now that the firewall is disabled, repeat whatever steps caused your problem to see if disabling this option has fixed the issue.

Disable the Firewall in Windows Vista

The Windows Firewall can be turned off in Windows Vista through Control Panel, similar to how it’s done in other versions of Windows.

Select Control Panel from the Start menu.

Choose Security from the category list.

If you’re in the «Classic View» of Control Panel, just skip down to the next step.

Select Windows Firewall.

Choose Turn Windows Firewall on or off on the left side of the window.

If a User Account Control window pops up, go ahead and click/tap through it by either entering an admin password or selecting Continue.

If you need to access this window again more quickly in the future, you can use the control firewall.cpl command in the Run dialog box.

Open the General tab and select the bubble next to Off (not recommended).

Select OK to apply the changes.

Disable the Firewall in Windows XP

Directions for turning off the Windows XP firewall is significantly different than it is in newer versions of Windows, but it’s still fairly simple.

Go to Start and then Control Panel.

Select Network and Internet Connections.

If you’re viewing the «Classic View» of Control Panel, open Network Connections and skip to Step 4.

Choose Network Connections under the or pick a Control Panel icon section.

Right-click or tap-and-hold your network connection and choose Properties.

If you have a «high speed» internet connection like Cable or DSL, or are on a network of some kind, your network connection will likely be titled Local Area Connection.

Open the Advanced tab and select Settings.

Choose the Off (not recommended) radio button.

Windows Firewall settings can also be opened with a simple shortcut via the Run dialog box or Command Prompt. Just enter this command: control firewall.cpl.

Select OK in this window and then OK again in the Properties window of your network connection. You can also close the Network Connections window.