PaperStream IP (TWAIN x64)

Important: This driver only works with 64-bit applications.
Please use the PaperStream IP (TWAIN) when using 32-bit applications, even on Windows ® 64-bit OS.

Note : PaperStream Capture is a 32-bit application.

Version

1.42.0.5685 (Service Update 7)

Supported Scanner Models

• fi-7460 / fi-7480
• fi-7280 / fi-7260 / fi-7180 / fi-7160
• fi-7030
• fi-6800 / fi-6400
• fi-6770 / fi-6670 / fi-6750S
• fi-6240Z / fi-6230Z / fi-6140Z / fi-6130Z
• fi-6240 / fi-6230 / fi-6140 / fi-6130
• fi-6110
• fi-65F
• fi-5950
• fi-5530C2

• Windows® 10 (64 -bit)
• Windows® 8.1 (64 -bit)
• Windows® 8 (64 -bit)
• Windows® 7 (64 -bit)
• Windows Vista® (64 -bit)
• Windows Server® 2012 R2 (64 -bit)
• Windows Server® 2012 (64 -bit)
• Windows Server® 2008 R2 (64 -bit)
• Windows Server® 2008 (64 -bit)

For more details about the supported operating system editions, refer to the manual of the scanner model you are using.

Notice:

Windows® XP is not supported by PaperStream IP version 1.40.0 or later.
Visit this page to download PaperStream IP version 1.30.0, which supports Windows® XP.

Contents of change

Version 1.42.0.5685 (Service Update 7)

Improvement:

Corrected issues:

1. Fixed the problem where PaperStream IP may not function correctly if the user name that is being logged on to the computer includes characters other than alphanumeric characters.
2. Fixed other minor problems.

Version 1.40.0.5555 (Service Update 7)

New features:

1. Added the [Switch by Code Sheet] function to Image Mode. This function allows to switch the image type for the output during scanning (the [Switch by Code Sheet] function is not available in fi-65F).
   
2. Added the [Front/Back Merging] function which combines front and back side of paper into one page (the [Front/Back Merging] function is not available in fi-6750S or fi-65F).
   Attention:
   PaperStream Capture v1.5 or later supports this function.
   
3. Added the [Statistic Information] function which allows to collect scanning information such as the scanner model used or the number of images outputted by the scanner.
   
4. Added the [Display at Scanning Start] function to Imprinter. This function allows changing a character string and counter values temporarily before starts scanning.
   
5. Added the [Carrier Sheet] function (fi-7480 and fi-7460 only).

Improvement:

1. Cropping accuracy in long page scanning has been improved (except fi-65F).

Corrected issues:

1. Fixed the problem where ScanSnap Manager for fi Series might close unexpectedly when scanning an Carrier Sheet (except fi-5950, fi-6800, fi-6400, and fi-65F).
2. Fixed the problem where the driver GUI might be misplaced off the screen in Arabic environment.
3. Fixed the problem which blank pages with index tab were detected as blank pages even when selecting “Exclude index-tabbed pages” (Some scanner models are not subject to the correction).

Software change history

Download

Important: This driver only works with 64-bit applications.
Please use the PaperStream IP (TWAIN) when using 32-bit applications, even on Windows ® 64-bit OS.

Note : PaperStream Capture is a 32-bit application.

PaperStream IP (TWAIN x64)

[Download] PSIPTWAIN64-1_42_0c.exe (123MB)

Installation

Be sure you log into Windows® as a user with administrator privileges.

1. Download «PSIPTWAIN64-1_42_0c.exe» onto your hard drive.
2. Quit any other applications that are running on your computer.
3. Execute the file that you downloaded in step 1. This creates a folder named «Disk1» in the same folder where the program is stored.Installation starts automatically after self-extraction. If it doesn’t start, double-click “Setup.exe” which is located in the Disk1 folder.
4. Follow the instructions from the Installation Wizard to complete the installation.
5. When the installation has completed, go to Control Panel -> [Programs] -> [Programs and Features] and confirm if the version of “PaperStream IP (TWAIN x64)” is correct.

You have completed the installation. Please refer to the README prior to activating it.

FUJITSU TWAIN32 Version 9.21.1600

Supported Scanner Models

• fi-60F / fi-6130 / fi-6230 / fi-6140 / fi-6240 / fi-5110C

• Microsoft® Windows® 2000 Professional
• Microsoft® Windows® XP Home Edition (32-bit)
• Microsoft® Windows® XP Professional (32-bit / 64-bit)
• Microsoft® Windows Server® 2003 Standard Edition (32-bit / 64-bit)
• Microsoft® Windows Server® 2003 R2, Standard Edition (32-bit / 64-bit)
• Microsoft® Windows Vista® Home Basic (32-bit / 64-bit)
• Microsoft® Windows Vista® Home Premium (32-bit / 64-bit)
• Microsoft® Windows Vista® Business (32-bit / 64-bit)
• Microsoft® Windows Vista® Enterprise (32-bit / 64-bit)
• Microsoft® Windows Vista® Ultimate (32-bit / 64-bit)
• Microsoft® Windows Server® 2008 Standard (32-bit / 64-bit)
• Microsoft® Windows Server® 2008 R2 Standard (64-bit)
• Microsoft® Windows® 7 Home Premium (32-bit / 64-bit)
• Microsoft® Windows® 7 Professional (32-bit / 64-bit)
• Microsoft® Windows® 7 Enterprise (32-bit / 64-bit)
• Microsoft® Windows® 7 Ultimate (32-bit / 64-bit)
• Microsoft® Windows® 8 (32-bit / 64-bit)
• Microsoft® Windows® 8 Pro (32-bit / 64-bit)
• Microsoft® Windows® 8 Enterprise (32-bit / 64-bit)
• Microsoft® Windows Server® 2012, Standard (64-bit)
• Microsoft® Windows® 8.1 (32-bit / 64-bit)
• Microsoft® Windows® 8.1 Pro (32-bit / 64-bit)
• Microsoft® Windows® 8.1 Enterprise (32-bit / 64-bit)
• Microsoft® Windows Server® 2012 R2, Standard (64-bit)
• Microsoft® Windows® 10 Home (32-bit / 64-bit) *1
• Microsoft® Windows® 10 Pro (32-bit / 64-bit) *1
• Microsoft® Windows® 10 Enterprise (32-bit / 64-bit) *1
• Microsoft® Windows® 10 Education (32-bit / 64-bit) *1

*1. Except fi-5110C

Contents of change

Version 9.21.1600

• Fixed the issue where an application error might occur when the driver received both DisableDS and CloseDS before receiving OpenDS from an application on Windows8.1 or later.
• Fixed the issue where a gamma pattern parameter specified for any of the following image types might be also applied to the other image types: binary, gray, or color
• Fixed the issue where an application error might occur when the TWAIN driver was used while six or more units of fi Series scanners were being connected.

Version 9.21.1509

• Fixed the defect that the driver is not available until the OS is rebooted when the driver ended abnormally because of communication error, etc. in the Thin Client environment during scanning.
• Fixed the defect that the application does not informed of the correct size of image when [Rotation degree: Automatic] or [Automatic Page Size Detection] is selected and scanning in the Memory Transfer mode on the flatbed scanner.
• Fixed the defect that error occurs when “CAP_PRINTER” is issued by the scanner equipped with the imprinter.
• Fixed the defect that [Blank Page Skip] is disabled when “CAP_AUTOSCAN” is issued.
• Fixed the defect that the driver hangs up when it is closed in the middle of scanning with documents still left on the ADF paper chute.
• Fixed the defect that the Software Operation Panel hangs up when it is launched while the driver is being used.

Driver download and installation

Download the driver to your hard disk by clicking the «Download» link below.

Version 9.21.1600
[Download] Ft9l18gX1.exe (size: 58.1MB)

Download file has been a self-extracting format.

By executing the downloaded «Ft9l18gX1.exe» file, program will be extracted in the same directory where the file exists. In case there is an existing driver, uninstall it before executing the file. Execute the «Setup.exe» in the created «¥Disk1» directory to start the driver installation.

For driver installation, please follow the Installation Guide. The functions and operation of the driver are in the «User’s Guide (2.39 MB )» (size: 2.4MB) or «TWAIN driver help». (The «User’s Guide», requires Adobe® Reader® 5.0 or later. If necessary, you can download it from: http://www.adobe.com

Note:
This driver can be used only with the supported scanner models. This update is not required if there is no problem in your operating environment. Before installation, please log in as administrator first.

For technical inquiries, please contact the seller where you purchased the scanner.

TWAIN32 Version 9.21.1307

Device drivers, included in the TWAIN Toolkit are downloadable from this page.

Supported Scanner Models

• fi-60F / fi-6130 / fi-6230 / fi-6140 / fi-6240 /
  fi-5110C / fi-5120C / fi-5220C / fi-5650C / fi-5750C

• Microsoft® Windows® 2000 Professional
• Microsoft® Windows® XP Home Edition (32bit)
• Microsoft® Windows® XP Professional (32bit / 64bit)
• Microsoft® Windows Server® 2003 Standard Edition (32bit / 64bit)
• Microsoft® Windows Server® 2003 R2, Standard Edition (32bit / 64bit)
• Microsoft® Windows Vista® Home Basic (32bit / 64bit)
• Microsoft® Windows Vista® Home Premium (32bit / 64bit)
• Microsoft® Windows Vista® Business (32bit / 64bit)
• Microsoft® Windows Vista® Enterprise (32bit / 64bit)
• Microsoft® Windows Vista® Ultimate (32bit / 64bit)
• Microsoft® Windows Server® 2008 Standard (32bit / 64bit)
• Microsoft® Windows Server® 2008 R2 Standard (64bit)
• Microsoft® Windows® 7 Home Premium (32bit / 64bit)
• Microsoft® Windows® 7 Professional (32bit / 64bit)
• Microsoft® Windows® 7 Enterprise (32bit / 64bit)
• Microsoft® Windows® 7 Ultimate (32bit / 64bit)
• Microsoft® Windows® 8 (32bit / 64bit)
• Microsoft® Windows® 8 Pro (32bit / 64bit)
• Microsoft® Windows® 8 Enterprise (32bit / 64bit)
• Microsoft® Windows Server® 2012, Standard (64bit)
• Microsoft® Windows® 8.1 (32bit / 64bit)
• Microsoft® Windows® 8.1 Pro (32bit / 64bit)
• Microsoft® Windows® 8.1 Enterprise (32bit / 64bit)
• Microsoft® Windows Server® 2012 R2, Standard (64bit)

Contents of change

The following operating systems are now supported:

• Microsoft® Windows® 8.1 (32bit / 64bit)
• Microsoft® Windows® 8.1 Pro (32bit / 64bit)
• Microsoft® Windows® 8.1 Enterprise (32bit / 64bit)
• Microsoft® Windows Server® 2012 R2, Standard (64bit)

• The startup time of TWAIN driver is shortened.

• The settings may not be correctly restored in the process of backup/restoration by DAT_CUSTOMDSDATA.
• Incorrect images may be output when the output file format was switched by
  DG_CONTROL/DAT_SETUPFILEXFER/MSG_SET after
  DG_CONTROL/DAT_USERINTERFACE/MSG_ENABLEDS was issued.
• Incorrect images may appear when scanning in the Memory Transfer mode.(Affected model: fi-60F)

Before Downloading — Software License Agreement Required

Before downloading this software, it is required that you accept the terms of the Software license agreement. Read the «terms of the Software license agreement» carefully, before you download the software. By downloading this driver software, you are deemed to have accepted this agreement.

* The driver installation method has changed. Please refer to the following installation procedure.

Driver download and installation

Download the driver to your hard disk by clicking the «Download» link below.

Version 9.21.1307	Disk space
[Download] Ft9l10bX5.exe (size: 57.4MB)	70Mbyte

Download file has been a self-extracting format.

By executing the downloaded «Ft9l10bX5.exe» file, program will be extracted in the same directory where the file exists. Refer to the above Disk space size as a measure of required Disk space.
In case there is an existing driver, uninstall it before executing the file.
Execute the «Setup.exe» in the created «¥Disk1» directory to start the driver installation.

For driver installation, please follow the Installation Guide. The functions and operation of the driver are in the «User’s Guide (2.39 MB )» (size: 2.4MB) or «TWAIN driver help». (The «User’s Guide», requires Adobe® Reader® 5.0 or later. If necessary, you can download it from: http://www.adobe.com.

Note:
This driver can be used only with the supported scanner models.
This update is not required if there is no problem in your operating environment.
Before installation, please log in as administrator first.

For technical inquiries, please contact the seller where you purchased the scanner.