Ubuntu Documentation

Creating a bootable Ubuntu USB flash drive from Ubuntu

Install and run Startup Disk Creator alias usb-creator

The Ubuntu Startup Disk Creator is dedicated to creating USB boot drives for Ubuntu and Ubuntu family flavours (Kubuntu, Lubuntu . Xubuntu).

Use another tool (e.g. ‘Unetbootin’ or ‘mkusb’), if you want to create a USB boot drive with another Linux distro (alias Linux operating system).

You can find usb-creator-gtk in the Unity Dash by typing «Startup Disk Creator» (Ubuntu Desktop) or usb-creator-kde in K-Menu—>Applications—>System—>Startup Disk Creator (Kubuntu). If it is not there, then you can install it using the Synaptic Package Manager or Ubuntu Software Center

• Insert and mount the USB drive. Inserting the USB drive should auto-mount it.
• Start the Startup Disk Creator
• In the top pane of the Startup Disk Creator, pick the .iso file that you downloaded.
• If the .iso file isn’t listed, click «Other» to locate and select the .iso file that you downloaded.
• In the bottom pane of the Startup Disk Creator, pick the target device, the USB flash drive. If more than one choice, please check carefully, until you are sure that you will be writing to the correct device.
• After checking that you are pointing to the correct target device, the USB flash drive, you can start the action.

You must enter a password because this is a risky operation. Use the password of the current user ID (the same as for login and running tasks with 'sudo'.

The Startup Disk Creator clones the iso file, which means that you need neither erase nor format the target drive. It will be completely overwritten anyway by the cloning process. The Startup Disk Creator looks like this in Ubuntu 18.04 LTS:

Notes

NEVER try to use one of your hard disk drives or SSDs or partitions in this process unless you really know what you are doing, as data will get erased.

There are bugs that affect the Ubuntu Startup Disk Creator, when you run it in old Ubuntu versions (e.g. 12.04 LTS, 14.04 LTS, 15.10) in BIOS mode and try to create USB boot drives with other versions. Some of the bugs are caused by conflicts between different versions of ‘syslinux’. These bugs do not affect installing in UEFI mode, where grub2 is used. And with the Ubuntu Startup Disk Creator version 0.3.2 in Ubuntu 16.04 LTS, these bugs are no longer a problem, so you can install any version of the Ubuntu flavours from 16.04 LTS.

The Startup Disk Creator is dedicated to creating USB boot drives for Ubuntu and Ubuntu family flavours (Kubuntu, Lubuntu . Xubuntu).

Use another tool (e.g. ‘Unetbootin’ or ‘mkusb’), if you want to create a USB boot drive with another Linux distro.

If you want to clone from a general image file to a drive, you can use mkusb. It lets you clone to any drive that is not busy, also an internal drive, and there are very obvious warnings to prevent mistakes.

Unetbootin

Unetbootin works in and with most Linux distros.

You can get Unetbootin for Linux via this link: unetbootin.sourceforge.net

Unetbootin should also work well in Ubuntu, when installed via the developer’s ppa. (The version in the Ubuntu repositories might not be up to date and should not be used.)

If you are using UEFI, there are/were problems to use Unetbootin with some Debian versions due to a bug.

Start Unetbootin, select an ISO file or a distribution to download, select a target drive (USB drive or Hard Disk), select persistence if you wish, then reboot once done. If your USB drive doesn’t show up, reformat it as FAT32. Mount the FAT32 partition (for example by un-plugging and re-plugging the drive).

If you don’t reboot, because you want to use the USB flash drive in another computer, unmount (eject) the FAT32 partition before unplugging it, otherwise you might corrupt the file system.

mkusb — dd image of iso file to USB device safely

If you want to clone from a general image file to a drive, you can use mkusb. It lets you clone to any drive that is not busy, also an internal drive, and there are very obvious warnings to prevent mistakes.

mkusb can also

• run in Debian and many linux distros that are similar to Ubuntu and Debian,
• clone from iso files of most Linux distros to create USB boot drives,
• create persistent live drives of the Ubuntu family and Debian,
• restore a USB boot drive to a standard storage device.

Simple, safe, high success rate

The mkusb tool was developed to make it simpler and safer to create boot drives with the method to flash or clone an iso image or a compressed image file. It is using dd under the hood.The target is a mass storage device, often but not always a USB drive, sometimes a memory card, an internal drive or an eSATA drive.

Cloning an iso file to a mass storage device makes a boot drive, provided it is a hybrid iso file, post-processed with isohybrid. Most modern linux distros provide hybrid iso files.

The cloning method with dd has a high success rate.

mkusb is particularly good for pre-release testing and new releases, when the standard tools might not be ready (if the configuration of the booting has been changed since the previous release).

Quick start manual and mkusb PPA

The fastest way to start making USB boot drives is to install the mkusb PPA, install and update the mkusb package like all the other program packages. See this link

If you run standard Ubuntu, you need an extra instruction to get the repository Universe. (Kubuntu, Lubuntu . Xubuntu have the repository Universe activated automatically.)

Otherwise the following three command lines are enough to install mkusb.

mkusb — wiki page

mkusb is described with more details at the following wiki page

mkusb — persistent live drives

https://help.ubuntu.com/community/mkusb/plug: mkusb-plug — very safe plug-in method to identify the target device (the USB flash drive)

Installation/FromUSBStick/fromUbuntu (последним исправлял пользователь nio-wiklund 2020-01-24 08:34:23)

The material on this wiki is available under a free license, see Copyright / License for details
You can contribute to this wiki, see Wiki Guide for details

Ubuntu Documentation

Outline

The general procedure to install Ubuntu (or Ubuntu flavour, Kubuntu, Lubuntu, Xubuntu, . ) from a USB flash drive is:

Get the correct Ubuntu installation file, ‘the iso file’, via this link or Ubuntu flavour via this link. Download the iso file into your running computer (for example into the directory Downloads in the internal drive, not into the USB flash drive that you want to make into a USB boot drive).

Check with md5sum (or another checksum tool) that the download was good.

Put Ubuntu onto your USB flash drive alias ‘stick’ alias ‘pendrive’ alias ‘thumb’. Tools for this purpose are described in this help page.

Configure your computer to boot from USB flash drive and boot from it.

Try Ubuntu (Kubuntu, Lubuntu, Xubuntu, . ) before installing it.

Install Ubuntu to your internal drive (hard disk drive or solid state drive or external drive).

See also: Installation/FromUSBStickQuick for beginners starting from Windows.

Introduction

Ubuntu can be installed from a USB flash drive. This may be necessary for most new portable computers without DVD drives and is handy for others because a USB flash drive is so convenient. Also, you can configure Ubuntu on the USB flash drive to save changes you make, unlike a read-only CD/DVD disk.

Booting from a USB flash drive created with usb-creator alias Startup Disk Creator and mkusb will behave just as if you had booted from the install CD. It will show the language selection and then the install menu, from which you can install Ubuntu onto the computer’s hard drive or launch the LiveCD environment. Other utilities, e.g. UNetbootin, may create slightly different boot drives or if on UEFI might not work at all with Debian iso files due to a bug

Note: This article uses the term «USB flash drive» alongside USB stick, USB drive, USB device, USB pendrive and thumb drive.

Prerequisites

To create a USB installation device, you will need:

a 4 GB USB flash device/drive/stick. If the iso file is smaller than 2 GB, it is possible to use a 2 GB USB device, at least with some of the methods. Files on this USB device will be erased, so backup the files you want to keep before making the device bootable. Some of the tools require that this USB device is properly formatted and mounted while other tools will overwrite whatever is on the target device. Please follow the instructions for each tool.

an Ubuntu flavour ISO file downloaded from an official web page, ubuntu.com/download or http://releases.ubuntu.com, stored in your running computer (for example in the directory Downloads in the internal drive, not in the USB flash drive that you want to make into a USB boot drive).

Check with md5sum (or another checksum tool) that the download was good. In Linux there is the tool ‘md5sum’. In Windows you can do it with Rufus: click on the circle with a tick mark (more about Rufus here.)

Dummy headlines

After a major remake of this help page the following headlines are kept here because they may be linked to from other web sites. Several other headlines further down in the page are also kept for this reason.

Notes about speed

Notes about size

Notes about bootability

The flash hardware

There is a detailed description at the sub-page /pre

Creating a bootable Ubuntu USB flash drive from Windows

There are various methods available for Windows to create a bootable Ubuntu USB flash drive.

NEVER try to use one of your hard disk drives or partitions in this process unless you really know what you are doing, as data will get erased.

Rufus

Rufus is the tool in Windows that is recommended officially by Ubuntu. A tutorial is available from here.

balenaEtcher

Pendrivelinux’s Universal USB Installer

UNetbootin

Win32 Disk Imager

There is a detailed description at /fromWindows including Rufus, balena Etcher, Universal USB Installer, Unetbootin and Win32 Disk Imager.

Creating a bootable Ubuntu USB flash drive from Ubuntu

Install and run Startup Disk Creator alias usb-creator

The Ubuntu Startup Disk Creator is dedicated to creating USB boot drives for Ubuntu and Ubuntu family flavours (Kubuntu, Lubuntu . Xubuntu).

Use another tool (e.g. ‘UNetbootin’ or ‘mkusb’), if you want to create a USB boot drive with another Linux distro (alias Linux operating system).

You can find usb-creator-gtk by typing «Startup Disk Creator» (Ubuntu Desktop) or usb-creator-kde in K-Menu—>Applications—>System—>Startup Disk Creator (Kubuntu). If it is not there, then you can install it using the Ubuntu Software Center.

• Insert and mount the USB drive. Inserting the USB drive should auto-mount it.
• Start the Startup Disk Creator
• In the top pane of the Startup Disk Creator, pick the .iso file that you downloaded.
• If the .iso file isn’t listed, click «Other» to locate and select the .iso file that you downloaded.
• In the bottom pane of the Startup Disk Creator, pick the target device, the USB flash drive. If more than one choice, please check carefully, until you are sure that you will be writing to the correct device.
• After checking that you are pointing to the correct target device, the USB flash drive, you can start the action.

You must enter a password because this is a risky operation. Use the password of the current user ID (the same as for login and running tasks with 'sudo'. Password is not required when installing from a ‘live’ system (booted from a DVD disk or another USB flash drive).

The Startup Disk Creator clones the iso file, which means that you need neither erase nor format the target drive. It will be completely overwritten anyway by the cloning process. The Startup Disk Creator looks like this in Ubuntu 18.04 LTS:

Notes

NEVER try to use one of your hard disk drives or SSDs or partitions in this process unless you really know what you are doing, as data will get erased.

There are bugs that affect the Ubuntu Startup Disk Creator, when you run it in old Ubuntu versions in BIOS mode and try to create USB boot drives with other versions. In the Ubuntu Startup Disk Creator version 0.3.2 in Ubuntu 16.04 LTS, these bugs are no longer a problem, so you can install any version of the Ubuntu flavours from 16.04 LTS and newer versions.

UNetbootin

Download UNetbootin

UNetbootin works in and with most Linux distros.

It is an extracting tool (not a cloning tool).

It can make a persistence file up to 4GB in size to save data and defaults.

mkusb — dd image of iso file to USB device safely

If you want to clone from a general image file to a drive, you can use mkusb. It lets you clone to any drive that is not busy, also an internal drive, and there are very obvious warnings to prevent mistakes.

mkusb can also

• run in Debian and many linux distros that are similar to Ubuntu and Debian,
• clone from iso files of most Linux distros to create USB boot drives,
• create persistent live drives of the Ubuntu family and Debian, using all available drive space for persistence and/or data storage,
• restore a USB boot drive to a standard storage device.

There is a detailed description at /fromUbuntu including the Startup Disk Creator, UNetbootin and mkusb.

Creating a bootable Ubuntu USB flash drive from Mac OSX

There is a good wiki page about booting with UEFI, and a good tutorial thread, UEFI Installing — Tips.

Test if running in UEFI mode

You may want to test if your Ubuntu flavour is running in [U]EFI mode. An installed system and a live system too is using the directory /sys/firmware/efi, so you can run the following command line,

The following command line is more robust and also easier to understand, so you may prefer it (if you copy & paste and are not bothered by typing a long command line),