Установка citrix workspace linux

Install, Uninstall, and Upgrade

You can install the Citrix Workspace app by downloading the file from the Citrix website at Downloads.

Manual install

Download the following packages from the Citrix Downloads page.

Debian packages

Install one of the Icaclient packages, or one of the IcaclientWeb packages based on your OS architecture.

To use generic USB redirection, install one of the ctxusb packages based on your OS architecture.

Package name	Contents
Debian packages (Ubuntu, Debian, Linux Mint etc.)
icaclient_20.06.0.15_amd64.deb	Self-service support, 64-bit x86_64
icaclient_20.06.0.15_i386.deb	Self-service support, 32-bit x86
icaclient_20.06.0.15_armhf.deb	Self-service support, ARM HF
icaclientWeb_20.06.0.15_amd64.deb	Web Receiver only, 64-bit x86_64
icaclientWeb_20.06.0.15_i386.deb	Web Receiver only, 32-bit x86
icaclientWeb_20.06.0.15_armhf.deb	Web Receiver only, ARM HF
ctxusb_20.06.0.15_amd64.deb	USB package, 64-bit x86_64
ctxusb_20.06.0.15_i386.deb	USB package, 32-bit x86
ctxusb_20.06.0.15_armhf.deb	USB package, ARM HF

Install using a Debian package

When installing Citrix Workspace app from Debian package on Ubuntu, open the packages in the Ubuntu Software Center.

In the following instructions, replace packagename with the name of the package that you are trying to install.

This procedure uses a command line and the native package manager for Ubuntu, Debian, or Mint. You can also install the package by double-clicking the downloaded .deb package in a file browser. This typically starts a package manager that downloads any missing required software. If no package manager is available, Citrix recommends you to use the gdebi, a command-line tool.

You must install the icaclient package or the icaclientWeb package.

To install the package using the command line:

1. Log on as a privileged (root) user.
2. Open a terminal window.

Run the installation for the following three packages by typing gdebi packagename.deb . For example:

• gdebi icaclient\_19.0.6.6\_amd64.deb
• gdebi icaclientWeb\_19.0.6.6\_i386.deb
• gdebi ctxusb\_2.7.6\_amd64.deb

To use dpkg in the above examples, replace gdebi with dpkg -i .

If you are using dpkg , install any missing dependencies by typing sudo apt-get -f install. .

• The ctxusb package is optional to support the generic USB redirection feature.
• Starting with Version 2101, an interactive prompt appears asking you to install app protection.

Installing the app protection component on Debian packages

Starting with Version 2102, app protection is supported on the Debian version of Citrix Workspace app.

For silent installation of the app protection component, run the following command from the terminal before installing Citrix Workspace app:

Installing Service Continuity on Debian packages

Starting with Version 2106, you can install Service Continuity on Debian version of Citrix Workspace app.

Run the following commands from the terminal before installing Citrix Workspace app:

sudo apt-get update

sudo apt-get install libwebkit2gtk-4.0-37 gnome-keyring libsecret-1-0

Red Hat packages

Install one of the ICAClient packages, or one of the ICAClientWeb packages based on your OS architecture.

To use generic USB redirection, install one of the ctxusb packages based on your OS architecture.

Package name	Contents
Redhat packages (Redhat, SUSE, Fedora etc.)
ICAClient-rhel-20.06.0.15-0.x86_64.rpm	Self-service support, Red Hat (including Linux VDA) based, 64-bit x86_64
ICAClient-rhel-20.06.0.15-0.i386.rpm	Self-service support, Red Hat based, 32-bit x86
ICAClientWeb-rhel-20.06.0.15-0.x86_64.rpm	Web Receiver only, Red Hat based, 64-bit x86_64
ICAClientWeb-rhel-20.06.0.15-0.i386.rpm	Web Receiver only, Red Hat based, 32-bit x86
ICAClient-suse-20.06.0.15-0.x86_64.rpm	Self-service support, SUSE based, 64-bit x86_64
ICAClient-suse-20.06.0.15-0.i386.rpm	Self-service support, SUSE based, 32-bit x86
ICAClientWeb-suse-20.06.0.15-0.x86_64.rpm	Web Receiver only, SUSE based, 64-bit x86_64
ICAClientWeb-suse-20.06.0.15-0.i386.rpm	Web Receiver only, SUSE based, 32-bit x86
ctxusb-20.06.0.15-1.x86_64.rpm	USB package, 64-bit x86_64
ctxusb-20.06.0.15-1.i386.rpm	USB package, 32-bit x86

The SuSE 11 SP3 Full Package (Self-Service Support) RPM package is deprecated.

Install using an RPM package

If you are installing Citrix Workspace app from the RPM package on SUSE, use the YaST or Zypper utility. The RPM utility installs the .rpm package. An error occurs if the required dependencies are missing.

To set up the EPEL repository on Red Hat

Download the appropriate source RPM package from the Fedora/Red Hat page.

For example, on Red Hat Enterprise 7.x, you can install the EPEL repository by using following command:

RPM Package Manager does not install any missing required software. To download and install the software, we recommend using zypper install at a command line on OpenSUSE or yum localinstall on Fedora/Red Hat.

To install from the RPM package

You must install the icaclient package or the icaclientWeb package.

1. Set up the EPEL repository.
2. Log on as a privileged (root) user.

Run the installation for the following three packages by typing zypper in

• ctxusb is an optional package. Install the package to support Generic USB Redirection.
• ctxappprotection is an optional package. Install the package only if you want to install the app protection component.

Open a terminal window.

For SUSE installations:

zypper in ICAClient-suse-19.12.0.19-0.x86_64.rpm

zypper in ICAClient-suse-19.12.0.19-0.i386.rpm

zypper in ctxusb-2.7.19-1.x86\_64.rpm

zypper in ctxappprotection-21.4.0.2-0.x86_64.rpm

For Red Hat installations:

yum localinstall ICAClient-rhel-19.12.0.19-0.i386.rpm

yum localinstall ICAClientWeb-rhel-19.12.0.19-0.i386.rpm

yum localinstall ctxusb-2.7.19-1.i386.rpm

yum localinstall ctxappprotection-21.4.0.2-0.x86_64.rpm

Accept the EULA.

To install a missing package

On a Red Hat based distribution (RHEL, CentOS, Fedora, and so on), if the following error message appears:

add an EPEL repository (details can be found at https://docs.fedoraproject.org/en-US/epel/).

Tarball packages

Install one of the following packages based on your OS architecture.

Package name	Contents
Tarballs (Script install for any distribution)
linuxx64-20.06.0.15.tar.gz	64-bit Intel
linuxx86-20.06.0.15.tar.gz	32-bit Intel
linuxarmhf-20.06.0.15.tar.gz	ARM HF

The difference between packages that offer support for Web Workspace app and those packages that support self-service is that the latter packages include dependencies required for self-service in addition to those needed for the Web Workspace app. Dependencies for self-service are a superset of those required for Web Workspace app, but the files installed are identical.

• If you require only workspace app for web, or your distribution does not have the necessary packages to support self-service, install only the workspace app for web package.
• Otherwise, install Citrix Workspace app from the Debian package or the RPM package. These files are easier to use because they automatically install any required packages.
• If you want to customize the installation location, install Citrix Workspace app from the tarball package.

• Do not use two different installation methods on the same machine. If you do, you might see error messages and unwanted behavior.

Install using a tarball package

The tarball package does not perform dependency checks nor install dependencies. All system dependencies must be resolved separately.

1. Open a terminal window.
2. Extract the contents of the .tar.gz file into an empty directory. For example, type: tar xvfz packagename.tar.gz .
3. Type ./setupwfc and then press Enter to run the setup program.
4. Accept the default of 1 (to install Citrix Workspace app) and press Enter.

Type the path and name of the required installation directory and then press Enter, or press Enter to install Citrix Workspace app in the default location.

The default directory for privileged (root) user installations is /opt/Citrix/ICAClient .

The default directory for non-privileged user installations is $HOME/ICAClient/platform . Platform is a system-generated identifier for the installed operating system, for example, $HOME/ICAClient/linuxx86 for the Linux/x86 platform).

If you specify a non-default location, set it in $ICAROOT in $HOME/.profile or $HOME/.bash\_profile .

If you have previously installed GStreamer, you can choose whether to integrate GStreamer with Citrix Workspace app, and thus, support HDX MediaStream Multimedia Acceleration. To integrate Citrix Workspace app with GStreamer, type y at the prompt.

On some platforms, installing the client from a tarball package can cause the system to become unresponsive after prompting you to integrate with KDE and GNOME. This issue occurs with the first-time initialization of gstreamer-0.10. If you encounter this issue, terminate the installation process (using the keys ctrl+c) and run the command gst-inspect-0.10 — gst-disable-registry-fork —version . After running the command, you can rerun the tarball package without experiencing the issue.

If you log on as a privileged user (root), choose to install USB support for Citrix Virtual Apps and Desktops published VDI applications. Type y at the prompt to install USB support.

If you are not logged on as a privileged user (root), the following warning appears:

“USB support cannot be installed by non-root users. Run the installer as root to access this install option.”

Uninstall

This procedure has been tested with the tarball package. Remove the RPM and Debian packages using your operating system’s standard tools.

The environment variable ICAROOT must be set to the installation directory of the client. The default directory for non-privileged user installations is $HOME/ICAClient/platform . The platform variable is a system-generated identifier for the installed operating system, for example, $HOME/ICAClient/linuxx86 for the Linux/x86 platform. Privileged user installation defaults to /opt/Citrix/ICAClient .

To uninstall Citrix Workspace app, you must be logged in as the same user who performed the installation.

To uninstall Citrix Workspace app on the tarball package

1. Run setup by typing $ICAROOT/setupwfc and press Enter.
2. To remove the client, type 2 and press Enter.

To uninstall Citrix Workspace app on Debian/Ubuntu Operating systems

Run the following command from the Citrix Workspace app installation folder:

apt remove icaclient apt autoremove

apt remove icaclient apt purge icaclient

To uninstall Citrix Workspace app on Fedora/RHEL/CentOS Operating systems

Run the following command from the Citrix Workspace app installation folder:

yum remove icaclient

Upgrade

To upgrade from Citrix Receiver to Citrix Workspace app, download and install the latest Citrix Workspace app from Citrix Downloads.

The Citrix Workspace screen overlay appears on the first launch of the app, when you upgrade, and when you uninstall and reinstall the app. Click Got it to continue using Citrix Workspace app, or click Learn more for more details.

Источник

2 Ways to Install Citrix Receiver and Connect to Desktops from Ubuntu and Other Linux

3 min

This guide explains 2 ways to Install Citrix Receiver and Connect to Desktops from Ubuntu and Other Linux.

Many organizations use commercial Citrix technology to provide their employees with remote connections via virtual machines. Citrix uses its proprietory tech to provide connection services.

To connect to a Citrix Virtual machine, you need Citrix client software to be installed. Citrix provides the client installer for Windows systems which you can just install and it will work.

However, for Linux, the story is different. Because of various package dependencies, compatibility of upstream Kernel version – it is sometimes difficult to install Citrix Workspace App (formerly Citrix XenApp plugin).

Here are two ways that you can install and connect to Citrix desktops. The first method requires the installation of packages and requires admin privileges. The second method is browser-based which requires Google Chome browser only (no admin privilege requires).

Method 1: Install Citrix Receiver in Linux and Connect to Desktops

Install Citrix Workspace App for Fedora, Red Hat, and Other .rpm based distributions

Download the below .rpm package for 64-bit systems. Go to the below link. Click on RPM Packages, then Red Hat Full Package (self service support). Then click on Download file under “Citrix Workspace app for Linux (x86_64)”

Open the .rpm package via Software or any package manager for installation. All the dependencies should already be present in your current system.

Now, go to the Uses section below on how to use it.

Install Citrix Workspace App for Ubuntu, Linux Mint, and Other Debian based distributions

Download the below .deb package for 64-bit systems. Go to the below link. Click on Debian Packages, then Full Package (self service support). Then click on Download file under “Citrix Workspace app for Linux (x86_64)”

Open the .deb package via Software or any package manager for installation. All the dependencies should already be present in your current system.

Now, go to the Uses section below on how to use it.

How to Use Citrix Workspace App

After the successful installation, open any browser and visit to your organization’s login page. And try to open the virtual machines.

The virtual machine .ica files should be downloaded. You can click to open it. It will open via Citrix Workspace App by default file associations.

Now, your target desktop should be opening with native Citrix plugin.

Method 2: Install and Connect to Citrix Desktop via Google Chrome Extension

Go to the below page and click on the “Add to Chrome” for the Citrix Workspace App Chrome Extension.

Remember, this extension is the official Citrix provided extension. But it will not work in any other Chromium-based browser e.g. Microsoft Edge, Chromium, Vivaldi, etc.

So, you have to use Google Chrome only to make it work.

How to use Citrix Workspace Chrome Extension

After installation, click on Launch or visit chrome://apps from Google Chrome Browser.

Click on the Citrix Workspace App.

Now, type the URL of your Organization’s Citrix login. And you should be all set.

Troubleshooting

The keyboard binding should work when you logged in to the virtual machine. Sometimes, the ALT+TAB doesn’t work while you are inside the Citrix virtual machines with native windows. Instead, it switches the applications on the host systems.

If this happens, change the ALT+TAB keyboard binding to something else e.e. ALT+

in your host system temporarily.

We bring the latest tech, software news and stuff that matters. Stay in touch via Telegram, Twitter, YouTube, and Facebook and never miss an update!

Источник