Vnc server для mac os

Set up a computer running VNC software for Remote Desktop

VNC access is determined by the VNC software. To access a computer running VNC, you only need to know the IP address or fully qualified domain name and the password designated in the VNC software. The VNC password doesn’t necessarily correspond to any other password on the system.

Set up a non-macOS client running VNC software

You can set up a non-macOS client to be viewed with Remote Desktop.

Install the VNC Server software and assign a VNC password on the client computer.

Make sure the client’s firewall has the VNC port open (TCP 5900).

For more detailed instructions on steps 1–2, see the documentation that came with the client operating system, VNC software, and firewall software.

Make sure “Encrypt all network data” isn’t selected in the Security pane of Remote Desktop preferences.

If you encrypt network data, you won’t be able to control the VNC client, because Remote Desktop can’t open the necessary SSH tunnel to that computer. When you try to control a computer running VNC software, you see a warning that the keystrokes aren’t encrypted.

Add the computer to the All Computers list in Remote Desktop using the client’s IP address.

Enter the client computer’s VNC password in the Remote Desktop authentication dialog.

Configure a client to be controlled by non-Apple VNC software

You can configure a Remote Desktop client to be controlled with non–Apple VNC software. Allowing non–Apple VNC software access to a Remote Desktop client is less secure than using Remote Desktop to control the client. The VNC protocol implemented in non–Apple VNC software may not encrypt keystrokes sent over the network, so sensitive information can be intercepted. Also, the non–Apple VNC software expects the password to be stored in a cryptographically unsecured form and location. Granting VNC access to control a screen is the most powerful feature in Remote Desktop, and provides nearly unrestricted access.

WARNING: Don’t select a VNC password that’s the same as the password of any local user on the client computer or of the Remote Desktop administrator.

On the client computer, choose Apple menu > System Preferences, click Sharing, then select Remote Management in the list at the left.

Click Computer Settings, then select “VNC viewers may control screen with password.”

Enter a VNC password, then click OK.

Change the VNC port on an existing computer

After you add a computer running VNC software to a computer list (or when you’re first adding it), you can set a custom port for VNC communication, and you can designate a display to control.

In Remote Desktop , select a computer list in the sidebar of the main window, select a computer running VNC software, then choose File > Get Info.

Click Edit, edit the Screen Sharing Port field, then click Done.

Designate a custom VNC port when adding a computer

You can pick a custom VNC port on which to view clients. Custom VNC ports are used for Network Address Translation (NAT) implementations, firewall settings, or viewing multiple displays.

In Remote Desktop , choose File > Add by Address, then enter the following:

The IP address or fully qualified domain name of the client computer

The user name and password

If the client computer uses NAT, click the Advanced Options triangle.

Enter the public ports that are mapped to the client in the Remote Management Port field and the Screen Sharing Port field, then click Add.

Источник

Fast, Simple & Secure

Instantly connect to a remote Mac device with VNC® Connect — Remote Access & Support

Powerful, secure & reliable remote desktop software for macOS

• Connect to your Mac remote devices and servers with VNC® Connect’s simple set-up process
• Easily transfer files, print, and chat between computers
• Securely control your unattended devices as if you were there in person
• Remotely connect to your customers and colleagues’ Apple devices without having to pre-install any software

• Our patent-protected technology automatically optimizes to the speed of your network, and is especially effective in low-bandwidth and high-latency environments
• Customize your remote desktop software with your own brand and logo
• Deploy in bulk, offline or remotely using standard enterprise tooling with VNC Connect® Enterprise

Superior performance, security and reliability — perfect for attended & unattended devices

Supports latest macOS and older versions

VNC® Connect is platform-independent and supports earlier versions of mac (from 10.10 Yosemite) as well as other operating systems such as Windows, Linux, Android and Raspberry Pi.

Take control of a colleague or customer’s computer in seconds (with their permission), but without any pre-installed software.

Multi-factor authentication and up to 256-bit AES end-to-end encryption. Our software also supports compliance with the GDPR and other security and privacy frameworks, including HIPAA and PCI DSS.

Intuitive remote control, high-speed streaming, responsive screen sharing, exceptional image quality and high-definition audio – it’s all there, and more.

Why our customers prefer VNC® Connect

RealVNC® remote access software allows us to assist Editors and Animators experiencing IT problems, without needing to leave our desks.

— Paul Reeves, Production Technology, Aardman Animations

— Paul Reeves, Production Technology, Aardman Animations

We’ve gone from being in limp mode to overdrive in one easy step, using RealVNC® as the driving force to get us there.

— Johan Booysen, Founder, Centurion Solar

— Johan Booysen, Founder, Centurion Solar

RealVNC® is a small miracle package that plays an essential role in minimizing disruption to emergency rescue efforts.

— Rashed Sarhadi, Information Technology Services, Clackamas County Fire District

— Rashed Sarhadi, Information Technology Services, Clackamas County Fire District

RealVNC® remote access software is a real game changer. It’s indispensable.

— Rick Pilley, Group Leader, Pratt and Whitney

— Rick Pilley, Group Leader, Pratt and Whitney

Источник

VNC: универсальное средство удаленного управления Mac

Большинство средств удаленного управления Mac зависят от конкретного разработчика и требуют установку специальных программ. Однако существует более гибкая технология под названием VNC (Virtual Network Computing).

В основе VNC лежит стандартный протокол, поэтому технология может использоваться в паре с продуктами от разных разработчиков и опен-сорсных проектов. Несмотря на большую разницу в функционале и возможностях, у всех этих программ есть одна общая черта – способность осуществлять удаленные подключения.

VNC доступна практически для каждой операционной системы. Другими словами вы можете использовать ее для соединения с ПК на любой платформе. Mac OS X имеет встроенную поддержку VNC (служба Общий экран работает именно по этому протоколу). Кроме того, некоторые VNC-клиенты работают с Apple Remote Desktop (ARD).

VNC поддерживают и устройства на iOS. Существует несколько мобильных приложений, позволяющих удаленно подключаться и управлять Mac/PC, с iPhone, iPod touch и iPad (например iTeleport: Jaadu VNC или Mocha VNC).

Однако гибкость технологии VNC накладывает на нее свои ограничения. В базовом виде она лишена многих важных функций, которыми располагают другие средства. Например VNC не может обойти NAT шлюзы, закрывающие локальную сеть. В этом случае на маршрутизаторе требуется настройка port-mapping (вручную или с помощью утилиты). При этом обязательным условием является наличие публичного (или внешнего) IP-адреса.

Изначально VNC не использует шифрование трафика, хотя некоторые клиенты добавляют криптозащиту и другие средства безопасности поверх VNC. При необходимости надежного шифрования всей VNC-сессии, ее можно устанавливать через SSL, SSH или VPN-туннель, а также поверх IPSec. Также технология не поддерживает трансляцию изображений с нескольких мониторов и передачу файлов. VNC-клиенты, работающие с ARD, лишены первого недостатка, а все остальные передают изображение только с главного монитора.

Настройка VNC

Для использования VNC на Mac OS X вы можете обратиться к нативным средствам системы или установить сторонний VNC-сервер.

Чтобы включить VNC в Leopard или Snow Leopard начните с запуска Системных настроек. Далее зайдите в Общий доступ и поставьте галочку для службы Общий экран. Выделите ее и нажмите кнопку Настройки компьютера. Отметьте пункт “Пользователи VNC могут получить управление экраном по паролю” и укажите пароль.

Сторонние VNC-продукты могут быть более настраиваемыми и надежными, чем OS X. Один из таких – бесплатный VNC-сервер Vine Server, версия 3.11 которого совместима со Snow Leopard.

После загрузки и установки Vine Server вы можете включить некоторые дополнительные опции. Среди них принудительное использование SSH-соединения (очень рекомендую) и возможность подключения к ПК, находящимся за шлюзом.

Для соединения с компьютером по VNC вы можете использовать встроенное решение Apple, работающее с любыми VNC-серверами на любой платформе или выбрать стороннее ПО, например JollysFastVNC ($40) или Vine Viewer ($35 в паре с Vine Server).

Для создания VNC-соединения с помощью одного из этих продуктов, запустите программу и введите IP-адрес или имя конечного компьютера. Для сетей, где несколько компьютеров имеют один IP-адрес, опционально указывается порт.

JollysFastVNC сохраняет профили для каждого соединения (в том числе SSH), хотя дополнительные настройки утилиты не всегда очевидны. Так, чтобы включить “безопасную оболочку” в поле SSH Options нужно написать -l имя, где имя – короткое имя компьютера, к которому подключается пользователь.

Не все с VNC проходит гладко и наиболее распространенная проблема – неправильная настройка маршрутизатора и портов. Обычно для удаленного VNC-подключения к машине с публичным IP необходимо открыть порт 5900.

Если вы задались вопросом удаленного соединения с Mac или PC, вам также будут интересны 5 способов удаленного подключения к Mac и удаленное управление Mac через Интернет.

Источник

Remote Desktop — VNC 4+

AndreasPrang

Screenshots

Description

Open VNC connections from your Mac to another as fast as possible.

No playing. No paying. No tricky features. It just works!

Any questions or problems? Please contact me: info@iSolute.de

Ratings and Reviews

works great, but.

— recent connection list didn’t work
— didn’t find a way how to save a connection
— and i didn’t like, that computer where i connect to, has to give permission first, which is not convenient

pls address these issues, and I will change to 5 starts.

I see people complain and see that it is just a wrapper, but i tried to find the original apple app, and i couldn’t 🙂

ok, figured out how to use the Remote Screen client without this app:
Go to Finder -> Go -> Connect to server -> vnc://ip_you_want_to_connect

this app is amazing!

this app is amazing!! that’s right. It does everything that its designed to do and without charging a dime! I looked at the other apps and they were charging ridiculous amount of money for something as simple as remote desktop. That’s crazy. Hats off to the developer for saving us some bucks!

Does what it says. Works between Linux and Macs!

I was trying to find an EASY way to remote connect between my home (Linux) and work (MacBook) Easier than the built in screen share app in Mac. Just pre-authorized VNC on my Linux input the IP address on the Mac and BAM. Done and done. Fast connection, too. Love it.

App Privacy

The developer, AndreasPrang , has not provided details about its privacy practices and handling of data to Apple.

No Details Provided

The developer will be required to provide privacy details when they submit their next app update.

Источник

Set up a computer running VNC software for Remote Desktop

VNC access is determined by the VNC software. To access a computer running VNC, you only need to know the IP address or fully qualified domain name and the password designated in the VNC software. The VNC password doesn’t necessarily correspond to any other password on the system.

Set up a non-macOS client running VNC software

You can set up a non-macOS client to be viewed with Remote Desktop.

Install the VNC Server software and assign a VNC password on the client computer.

Make sure the client’s firewall has the VNC port open (TCP 5900).

For more detailed instructions on steps 1–2, see the documentation that came with the client operating system, VNC software, and firewall software.

Make sure “Encrypt all network data” isn’t selected in the Security pane of Remote Desktop preferences.

If you encrypt network data, you won’t be able to control the VNC client, because Remote Desktop can’t open the necessary SSH tunnel to that computer. When you try to control a computer running VNC software, you see a warning that the keystrokes aren’t encrypted.

Add the computer to the All Computers list in Remote Desktop using the client’s IP address.

Enter the client computer’s VNC password in the Remote Desktop authentication dialog.

Configure a client to be controlled by non-Apple VNC software

You can configure a Remote Desktop client to be controlled with non–Apple VNC software. Allowing non–Apple VNC software access to a Remote Desktop client is less secure than using Remote Desktop to control the client. The VNC protocol implemented in non–Apple VNC software may not encrypt keystrokes sent over the network, so sensitive information can be intercepted. Also, the non–Apple VNC software expects the password to be stored in a cryptographically unsecured form and location. Granting VNC access to control a screen is the most powerful feature in Remote Desktop, and provides nearly unrestricted access.

WARNING: Don’t select a VNC password that’s the same as the password of any local user on the client computer or of the Remote Desktop administrator.

On the client computer, choose Apple menu > System Preferences, click Sharing, then select Remote Management in the list at the left.

Click Computer Settings, then select “VNC viewers may control screen with password.”

Enter a VNC password, then click OK.

Change the VNC port on an existing computer

After you add a computer running VNC software to a computer list (or when you’re first adding it), you can set a custom port for VNC communication, and you can designate a display to control.

In Remote Desktop , select a computer list in the sidebar of the main window, select a computer running VNC software, then choose File > Get Info.

Click Edit, edit the Screen Sharing Port field, then click Done.

Designate a custom VNC port when adding a computer

You can pick a custom VNC port on which to view clients. Custom VNC ports are used for Network Address Translation (NAT) implementations, firewall settings, or viewing multiple displays.

In Remote Desktop , choose File > Add by Address, then enter the following:

The IP address or fully qualified domain name of the client computer

The user name and password

If the client computer uses NAT, click the Advanced Options triangle.

Enter the public ports that are mapped to the client in the Remote Management Port field and the Screen Sharing Port field, then click Add.

Источник