Vpn pptp для mac os catalina

Shimo

Информация

Описание

Хотите регулярно использовать анонимное, надежное, безопасное интернет-подключение без каких-либо ограничений? Как насчет высококлассной программы для менеджмента VPN на Mac? Вы будете в восторге от Shimo, потому что этот VPN клиент предоставляет улучшенный пользовательский интерфейс в сочетании с военным уровнем безопасности. Когда дело доходит до создания, редактирования и управления VPN соединениями, это — настоящий лидер. Поддерживая больше протоколов, чем другие VPN, этот клиент для Mac содержит набор продвинутых возможностей. Кроме того, он использует AES 256-битное шифрование, сертифицированное официальными организациями, международными компаниями и армией.

Ключевые функции Shimo

Протоколы VPN в вашем распоряжении
Не останавливайтесь на одном протоколе! С этой удобной VPN утилитой для Mac у вас есть чудесная возможность использовать любой из существующих. Это высококлассные SSL VPN клиент, IPSEC VPN клиент/PPT VPN клиент + ретрансляция портов, обеспечивающие безопасную работу в браузере.

Шифрование данных и другая защита на уровне банка
Приложение предлагает военный уровень защиты с шифрованием AES 256-бит. Для вас это означает, что наиболее ценные данные будут под надежной защитой. Включена возможность безопасной работы в веб-браузере. Более того, приложение предоставляет двухфакторную аутентификацию (Смарт-карты/Токены).

Одновременные подключения
Как насчет того, чтобы настроить несколько подключений сразу? Хотите иметь возможность пользоваться несколькими соединениями одновременно? Shimo позволяет быстро и без проблем использовать столько подключений, сколько вам нужно. Различные протоколы также могут использоваться параллельно.

Автоматизации триггера
Выберите условия срабатывания триггера, и аккаунты VPN смогут подключаться автоматически. Можно устанавливать триггеры на основании конфигурации сети, беспроводной сети, географического местоположения и типа шифрования. Назначайте выполнение действий после установления определенного подключения или его отключения.

Правильный инструмент для работы
Без усилий создавайте защищенные подключения, даже если вы новичок в мире сетей и VPN клиентов для Mac. Также круто, что вам не нужна техническая подготовка для использования Shimo. Да, он настолько прост и понятен.

Комплексный учет и статистика
В приложении доступна опция точного отслеживания времени. Создавайте подробные CSV отчеты после каждого финансового цикла. Изучайте динамическую статистику для определения точных данных касательно VPN подключений, активных в данный момент.

Источник

Настройка подключения VPN на Mac

Чтобы подключиться к сети VPN, необходимо ввести настройки конфигурации на панели «Сеть». Эти настройки включают адрес сервера VPN, имя учетной записи и другие параметры идентификации, такие как пароль или сертификат, полученные от сетевого администратора.

Если Вы получили файл настроек VPN от администратора сети, можно импортировать его для настройки подключения. Если нет, то настройки можно ввести вручную.

Импорт файла настроек VPN

На Mac выполните одно из следующих действий.

Дважды нажмите на файл, чтобы открыть настройки сети и автоматически импортировать настройки.

Выберите пункт меню «Apple»

> «Системные настройки», нажмите «Сеть», нажмите раскрывающееся меню «Действия» , затем выберите «Импортировать конфигурации». Выберите файл, затем нажмите «Импортировать».

Введите настройки VPN автоматически

На Mac выберите меню Apple

> «Системные настройки», затем нажмите «Сеть».

Нажмите кнопку «Добавить» в списке слева, нажмите всплывающее меню «Интерфейс», затем выберите «VPN».

Нажмите всплывающее меню «Тип VPN», затем выберите тип VPN-подключения, который Вы хотите настроить, в зависимости от сети, к которой Вы подключаете компьютер. Присвойте имя службе VPN, затем нажмите «Создать».

Протокол L2TP — это расширенная версия протокола PPTP, который используется интернет-провайдерами для поддержки VPN через Интернет.

Протокол IPSec (Internet Protocol Security) является набором протоколов безопасности.

IKEv2 — это протокол, который настраивает сопоставление безопасности в IPSec.

Введите адрес сервера и имя учетной записи для VPN-подключения.

Нажмите «Настройки аутентификации», затем введите информацию, полученную от администратора сети.

Если Вы получили соответствующие указания от администратора сети, нажмите «Дополнительно» и введите дополнительную информацию, такую как параметры сеанса, настройки TCP/IP, DNS-серверы и прокси.

Дополнительная информация, которую Вы можете ввести, зависит от типа настраиваемого VPN-подключения.

Нажмите «Применить», затем нажмите «ОК».

Выберите «Показывать статус VPN в строке меню», чтобы использовать значок статуса VPN для подключения к сети и переключения между службами VPN.

Для удаления конфигурации VPN выберите службу VPN в списке сетевых служб и нажмите кнопку «Удалить» .

Источник

PPTP VPN on MAC OS X Sierra, High Sierra and Mojave for FREE

PPTP VPN for Mac OS X

Update: For Mac OS X Catalina

For PPTP VPN on Mac OS X Catalina continue here.

Introduction

PPTP VPN is no longer supported on macOS Sierra and High Sierra and that is just fine, because there are some security issues. What is not fine that in corporate environment the inertia is so big, that this can take years to stop using PPTP VPN.

So you have basically 4 options:

1. change your job
2. use some of third-party software for example shimovpn (€49)
3. use my custom made PPTP VPN for mac (☕️)
4. DIY (free)

PPTP VPN ON MACOS SIERRA AND HIGH SIERRA IS NO LONGER AVAILABLE

DIY Solution

Here is video tutorial reproducing following steps.

I’m going to cover the third one here and its quite simple. Open terminal and create file with name of your vpn server in /etc/ppp/peers/

If you get error, because the peers folder doesn’t exist, create it with mkdir /etc/ppp/peers command). Then edit this newly created file

Copy paste and fill your details

And finally run pppd deamon

If you get PPTP error when reading socket : EOF just try run the command again, or comment out the the line with ms-dns 8.8.8.8

Alternatively you can create this file anywhere and run it as

Automator

You can automate it with Automator. Just drag and drop “Run AppleScript” from left pane. And insert following line:

Now save it to Application folder and you can run it as regular app. It will ask you for administrator privileges every time because it runs pppd command. When you run it you can see little gear in you status bar indicating VPN runs and get error prompt any time VPM fails.

Download VPN.app

If you want to have nice shiny app that let you connect to VPN and that you can control from menu bar, instead of writing commands again and again in terminal, you can download this one for price of 1 coffee.

After you download, you have to right-click and open to run it.

References

Comments (90)

Jean Hurtado

I’m on wifi but show this error when try to connect:

Wed Jun 2 10:19:20 2021 : publish_entry SCDSet() failed: Success!
Wed Jun 2 10:19:20 2021 : publish_entry SCDSet() failed: Success!
Wed Jun 2 10:19:20 2021 : PPTP connecting to server ‘XXX.XXX.XXX.XXX’ (XXX.XXX.XXX.XXX)…
Wed Jun 2 10:19:20 2021 : PPTP connection established.
Wed Jun 2 10:19:20 2021 : PPTP set port-mapping for en0, interface: 10, protocol: 0, privatePort: 0
Wed Jun 2 10:19:20 2021 : using link 1
Wed Jun 2 10:19:20 2021 : Using interface ppp1
Wed Jun 2 10:19:20 2021 : Connect: ppp1 socket[34:17]
Wed Jun 2 10:19:20 2021 : sent [LCP ConfReq ]
Wed Jun 2 10:19:23 2021 : sent [LCP ConfReq ]
Wed Jun 2 10:19:24 2021 : PPTP port-mapping for en0, interfaceIndex: 0, Protocol: None, Private Port: 0, Public Address: 0, Public Port: 0, TTL: 0.
Wed Jun 2 10:19:24 2021 : PPTP port-mapping for en0 inconsistent. is Connected: 1, Previous interface: 10, Current interface 0
Wed Jun 2 10:19:26 2021 : sent [LCP ConfReq ]
Wed Jun 2 10:19:29 2021 : sent [LCP ConfReq ]
Wed Jun 2 10:19:32 2021 : sent [LCP ConfReq ]
Wed Jun 2 10:19:35 2021 : sent [LCP ConfReq ]
Wed Jun 2 10:19:38 2021 : sent [LCP ConfReq ]
Wed Jun 2 10:19:41 2021 : sent [LCP ConfReq ]
Wed Jun 2 10:19:44 2021 : sent [LCP ConfReq ]
Wed Jun 2 10:19:48 2021 : sent [LCP ConfReq ]
Wed Jun 2 10:19:51 2021 : LCP: timeout sending Config-Requests
Wed Jun 2 10:19:51 2021 : Connection terminated.
Wed Jun 2 10:19:51 2021 : PPTP disconnecting…
Wed Jun 2 10:19:51 2021 : PPTP clearing port-mapping for en0
Wed Jun 2 10:19:51 2021 : PPTP disconnected

Sandro Kindler

ola fiz a compra mas meu mac não conecta é High Sierra 10.13.6 via scripts conecta normal mas pelo programa não o que posso fazer.

MAXWELL P GROSSMAN

Hi. for this diy script, I added it to automator and ran it from applications. It worked and the VPN connection was made. While it’ running, the gear remains spinning, then when I stop it, the connection remains. Is there a way to stop it manually, or add to the script to stop the connection when I stop the script? I tried killall pppd and with sudo as well. Thanks!

Androidena

The Shimo VPN app supports all major VPN protocols: CiscoVPN, OpenVPN, L2TP, PPTP, and all standard-compliant IPSec connections. Shimo also enables you to set up split tunneling on Mac or to establish encrypted SSH connections, including port forwarding for secure web browsing.

I installed Shimo! Couldn’t help on osx 10.14.6 connect to pptp. A general error occured. Please get in contact with the support from Mailbutler.PPTP received unexpected message type = 6699

Nikola Despotovic

i have a problem with pptp, on windows works without problem, but on mac when operator router address is same as gw on vpn it wont find any remote address.

Can this be fixed in your script?
As i said on windows works without problem.

Hi is it running for Catalina now V10.15.5? Need it for Parallels WIn 10 vpn to Winserver Pls advise asap

Vincent

I just bough the App (v.1.1.1), it works to connect to my VPN, but I have two requests: could the icon change color or otherwise indicate that the connection is made? Also, would it be possible to have an option in the App to disconnect the VPN? Right now I have to start Terminal and kill pppd manually. I see in the App’s menu a toggle button, when I click it, it becomes “waiting…”, and once the connection is successful, the button reappears, still in an “off” state, yet I can connect to my VPN resources and the Log shows that the connection is successful.

I am running Mojave with the latest security patch (10.14.6 with Feb. 2020 patch).

Vincent

And now it works (icon becomes black, toggle switch goes to green, toggling it again disconnects). I moved the app file to the Applications folder, maybe that was what was missing? Looking good for now, thanks!

RickkeeC

For Catalina, the only thing we found to work is VPNTracker.com for $99 per year. (Comes with free 3 minute access 🙁 so you can check it works) You have to be able to enable MPEE? MPPE? encryption on your VPN Router. Maybe better to get a cheap VPN router that supports L2TP/IPSEC…. Anyhow, they use a custom module to add back the pptp functionality.

David

Hi, I bought the app a few days ago – Is it possible to set up split tunneling with this app? When I connect to the VPN I can access the VPN resources, but I can’t access the internet.

I’ve downloaded the software – it said it was trying to install a helper agent, asked for my password which I input. Running the app does nothing and doesn’t bring up any window? 🙁 OS Sierra 10.12.6

Hmm ignore that – after 3 restarts for some reason my machine decided to allow it! Random.

Manatea

I can’t connect because of username :

rcvd [CHAP Failure “E=691 R=0 V=3 M=Authentication failure”]
Mon Mar 23 10:34:29 2020 : MS-CHAP authentication failed: Authentication failure

when I put domain\user , it removes the backslash : domainuser

when I try double backslash : domain\\user , it keeps the double backslash : domain\\user

Luca Dentale

hi,
i’ bought your software but i can’t navigate anymore on Internet after the app start.
Can you help me?

admin

Hi, try to restart you computer, if you are using Catalina it won’t work (works only for older mac OS)

Claudio Magagnotti

hello, im trying to pay for the app using this link “https://www.buymeacoffee.com/l/CAxk86scu” but its not working. Alway I get “your card was declined”

Gnandt Janos

wonderful. amazing…. everything it’s ok
thank you

stan vacek or alan white

then name on card is alan white stan vacek is for iD theft protectuin. i sent $5 via credit card visa jan 22. i still have not recieved PPTP VPN on MAC High Sierra

Источник

PPTP VPN ON MAC OS X CATALINA FOR FREE

Introduction

PPTP VPN is no longer supported on macOS for some time but in last release the PPTP.ppp plugin, that was still part of the OSX and we were able to reuse it to connect was also removed.

Solution

Please note that PPTP is outdated and you should not use it. Also I have limited chance to test is so it may not work at all.

You can try build this library http://pptpclient.sourceforge.net/howto-debian.phtml and put the output binary into /usr/local/bin. You can build it on your own or download my build (http://filipmolcik.com/releases/pptp/pptp.zip).

Then create pptp_config_file in /etc/ppp/peers/ and edit it as is below (change REMOTE_ADRESS, USER_NAME and PASSWORD to fit your needs). Also note the first line that is different from the previous script.

And finally run it with command

Comments (51)

Yordan

Hey, does anybody try it on Big Sur?
I spent some days trying, but the result it that the mppe is not included in the kernel, and no success.
Any ideas?

Anatole

HI
Just downloaded your PPTPVPN utility but it doesn’t work in Mojave :(.
Any ideas?
Enjoy the coffee – Anatole

Rafael

Buenas noches,
Alguien podría ayudarme a conectarme por pptp VPN en Catalina.
Soy nuevo con macbook y no sé bien por dónde empezar.
Muchas gracias por vuestros comentarios.
Un saludo

dr maoileoin

Great tutorial and pre-build library. Works a treat and saves me a pile of hassles.
I am connecting to a Cisco
drs-MacBook-Pro:peers root# cat y
pty “/usr/local/bin/pptp 8.8.8.8 –nolaunchpppd”
remoteaddress 8.8.8.8
user “user in here”
password “password!”
# require-mppe-128
logfile /tmp/pptp
## Other settings
#noauth
redialcount 1
redialtimer 5
idle 1800
mru 1436
mtu 1436
receive-all
#novj 0:0
ipcp-accept-local
ipcp-accept-remote
hide-password
looplocal
nodetach
#ms-dns 8.8.8.8
#usepeerdns
debug
#default-route
one it connects I do a
route add -net x.y.z.a/16 x.y.z.1 etc etc
solid as a rock

Marco Aurelio Simao

I passed that, now I have this error:
Tue Nov 3 10:57:02 2020 : publish_entry SCDSet() failed: Success!
Tue Nov 3 10:57:02 2020 : publish_entry SCDSet() failed: Success!
Tue Nov 3 10:57:02 2020 : using link 1
Tue Nov 3 10:57:02 2020 : Using interface ppp1
Tue Nov 3 10:57:02 2020 : Connect: ppp1 /dev/ttys003
Tue Nov 3 10:57:03 2020 : sent [LCP ConfReq ]
Tue Nov 3 10:57:06 2020 : sent [LCP ConfReq ]
Tue Nov 3 10:57:09 2020 : sent [LCP ConfReq ]
Tue Nov 3 10:57:12 2020 : sent [LCP ConfReq ]
Tue Nov 3 10:57:15 2020 : sent [LCP ConfReq ]
Tue Nov 3 10:57:18 2020 : sent [LCP ConfReq ]
Tue Nov 3 10:57:21 2020 : sent [LCP ConfReq ]
Tue Nov 3 10:57:24 2020 : sent [LCP ConfReq ]
Tue Nov 3 10:57:27 2020 : sent [LCP ConfReq ]
Tue Nov 3 10:57:30 2020 : sent [LCP ConfReq ]
Tue Nov 3 10:57:33 2020 : LCP: timeout sending Config-Requests
Tue Nov 3 10:57:33 2020 : Connection terminated.
Tue Nov 3 10:57:33 2020 : Waiting for 1 child processes…
Tue Nov 3 10:57:33 2020 : script /usr/local/bin/pptp vpn.unifique.net –loglevel 2 –nolaunchpppd, pid 6985
Tue Nov 3 10:57:33 2020 : Waiting for 1 child processes…
Tue Nov 3 10:57:33 2020 : script /usr/local/bin/pptp vpn.unifique.net –loglevel 2 –nolaunchpppd, pid 6985
Tue Nov 3 10:57:33 2020 : Script /usr/local/bin/pptp vpn.unifique.net –loglevel 2 –nolaunchpppd finished (pid 6985), status = 0x0

Marco Aurelio Simao

My connection just dies after this line:
publish_entry SCDSet() failed: Success!

rizki

i got this error
“pptp” cannot be opened because the developer cannot be verified.

Pete D.

Doesn’t work for me. Keep getting error.

Nico Smuts

Any solution for Catalina giving connection termination ?

adkoo

Hello. Have anybody fixed error:
MPPE required, but kernel has no support

My server VPN require it.

spectroman

So is there any suggestion to fix the “MPPE required, but kernel has no support.” on Catalina ?

epeus

To deal with this I have to use pppd from Mojave ( 847.200.5 ). I renamed it to mpppd and put it in /usr/local/bin/ then when I need to connect to my VPN server I will type sudo mpppd call pptp_config_file . You can download my Mojave’s pppd here: https://github.com/anhnd/PPTPMacOS10.15 or try to get it yourself

admin

I have tried it, but still getting “MPPE required, but kernel has no support.”…. Didn’t you forget to mention any other steps? For example to also use locale/bin/pptp file from Mojave?

Hey,
it seems the link is not valid anymore, may i ask you to share it again in order to try your solution please?
Thanks in advance!
Dan

Leonid Derevianko

Hello do you have a pptp file for BigSur ?
and the link you wrote is unavailable any more

noname

try Power PPPD for remove this error https://pppd.mavrinsoft.com/

quanduixanh

anld@anlds-MacBook-Pro peers % sudo pppd call pptp_config_file
Password:
Wed Mar 25 15:03:43 2020 : publish_entry SCDSet() failed: Success!
Wed Mar 25 15:03:43 2020 : publish_entry SCDSet() failed: Success!
Wed Mar 25 15:03:43 2020 : using link 0
Wed Mar 25 15:03:43 2020 : Using interface ppp0
Wed Mar 25 15:03:43 2020 : Connect: ppp0 /dev/ttys002
Wed Mar 25 15:03:44 2020 : sent [LCP ConfReq ]
Wed Mar 25 15:03:44 2020 : rcvd [LCP ConfReq ]
Wed Mar 25 15:03:44 2020 : lcp_reqci: returning CONFACK.
Wed Mar 25 15:03:44 2020 : sent [LCP ConfAck ]
Wed Mar 25 15:03:44 2020 : rcvd [LCP ConfRej ]
Wed Mar 25 15:03:44 2020 : sent [LCP ConfReq ]
Wed Mar 25 15:03:44 2020 : rcvd [LCP ConfAck ]
Wed Mar 25 15:03:44 2020 : rcvd [LCP EchoReq magic=0x3aa4cfab]
Wed Mar 25 15:03:44 2020 : sent [LCP EchoRep magic=0x2f45eda3]
Wed Mar 25 15:03:44 2020 : rcvd [CHAP Challenge , name = “pptpd”]
Wed Mar 25 15:03:44 2020 : sent [CHAP Response , name = “xxxx”]
Wed Mar 25 15:03:44 2020 : rcvd [CHAP Success “S=5042A4E6B1988D99A7DD7885A7B85C7DDA31F4D3 M=Access granted”]
Wed Mar 25 15:03:44 2020 : sent [IPCP ConfReq ]
Wed Mar 25 15:03:44 2020 : sent [ACSCP ConfReq ]
Wed Mar 25 15:03:44 2020 : rcvd [CCP ConfReq ]
Wed Mar 25 15:03:44 2020 : sent [CCP ConfReq/> Wed Mar 25 15:03:44 2020 : sent [CCP ConfRej ]
Wed Mar 25 15:03:44 2020 : rcvd [IPCP TermAck/> Wed Mar 25 15:03:44 2020 : rcvd [LCP ProtRej 82 35 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01]
Wed Mar 25 15:03:44 2020 : rcvd [CCP ConfAck/> Wed Mar 25 15:03:44 2020 : rcvd [LCP TermReq “MPPE required but cannot negotiate MPPE key length”]
Wed Mar 25 15:03:44 2020 : LCP terminated by peer (MPPE required but cannot negotiate MPPE key length)
Wed Mar 25 15:03:44 2020 : sent [LCP TermAck/> Wed Mar 25 15:03:45 2020 : Script /usr/local/bin/pptp IPX –nolaunchpppd finished (pid 687), status = 0x0
Wed Mar 25 15:03:47 2020 : Connection terminated.

sterk

Hi ty pptp with Catalina, but i have got this error,

Any body can help me :

myname$ sudo pppd call ./pptp_config_file.txt

Tue Mar 24 22:12:15 2020 : pppd options in effect:

Tue Mar 24 22:12:15 2020 : debug # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : nodetach # (from /etc/ppp/peers/./pptp_config_file.txt, /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : idle 1800 # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : logfd 2 # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : dump # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : remoteaddress MYSERVER # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : redialcount 1 # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : redialtimer 5 # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : noauth # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : name MYVPNLAN # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : user myusername # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : password . # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : looplocal # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : pty /usr/local/pptp MYSERVER –nolaunchpppd # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : mru 1436 # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : mtu 1436 # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : receive-all # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : hide-password # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : novj # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : ipcp-accept-local # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : ipcp-accept-remote # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : ms-dns xxx # [don’t know how to print value] # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : defaultroute # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : usepeerdns # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : : # (from /etc/ppp/peers/./pptp_config_file.txt)

Tue Mar 24 22:12:15 2020 : publish_entry SCDSet() failed: Success!

Tue Mar 24 22:12:15 2020 : publish_entry SCDSet() failed: Success!

Tue Mar 24 22:12:15 2020 : using link 0

Tue Mar 24 22:12:15 2020 : Using interface ppp0

Tue Mar 24 22:12:15 2020 : Connect: ppp0 /dev/ttys002

Tue Mar 24 22:12:16 2020 : sent [LCP ConfReq ]

Tue Mar 24 22:12:16 2020 : rcvd [LCP ConfReq ]

Tue Mar 24 22:12:16 2020 : lcp_reqci: rcvd unknown option 13

Tue Mar 24 22:12:16 2020 : lcp_reqci: returning CONFREJ.

Tue Mar 24 22:12:16 2020 : sent [LCP ConfRej ]

Tue Mar 24 22:12:16 2020 : rcvd [LCP ConfAck ]

Tue Mar 24 22:12:17 2020 : rcvd [LCP ConfReq ]

Tue Mar 24 22:12:17 2020 : lcp_reqci: returning CONFACK.

Tue Mar 24 22:12:17 2020 : sent [LCP ConfAck ]

Tue Mar 24 22:12:17 2020 : rcvd [EAP Request Identity ]

Tue Mar 24 22:12:17 2020 : sent [EAP Response Identity ]

Tue Mar 24 22:12:17 2020 : rcvd [EAP Failure “”]

Tue Mar 24 22:12:17 2020 : rcvd [LCP TermReq “x<)\37777777626\000

Tue Mar 24 22:12:20 2020 : Connection terminated.

Tue Mar 24 22:12:20 2020 : Waiting for 1 child processes…

Tue Mar 24 22:12:20 2020 : script /usr/local/pptp MYSERVER –nolaunchpppd, pid 1855

Tue Mar 24 22:12:20 2020 : Waiting for 1 child processes…

Tue Mar 24 22:12:20 2020 : script /usr/local/pptp MYSERVER –nolaunchpppd, pid 1855

Tue Mar 24 22:12:20 2020 : Script /usr/local/pptp MYSERVER –nolaunchpppd finished (pid 1855), status = 0x0

antonio

Hello, this is the error I get:

Mar 22 18:23:09 2020 : publish_entry SCDSet() failed: Success!
Sun Mar 22 18:23:09 2020 : publish_entry SCDSet() failed: Success!
Sun Mar 22 18:23:09 2020 : using link 0
Sun Mar 22 18:23:09 2020 : Using interface ppp0
Sun Mar 22 18:23:09 2020 : Connect: ppp0 /dev/ttys001
Sun Mar 22 18:23:10 2020 : sent [LCP ConfReq ]
Sun Mar 22 18:23:10 2020 : rcvd [LCP ConfReq ]
Sun Mar 22 18:23:10 2020 : lcp_reqci: returning CONFACK.
Sun Mar 22 18:23:10 2020 : sent [LCP ConfAck ]
Sun Mar 22 18:23:10 2020 : rcvd [LCP ConfRej ]
Sun Mar 22 18:23:10 2020 : sent [LCP ConfReq ]
Sun Mar 22 18:23:10 2020 : rcvd [LCP ConfAck ]
Sun Mar 22 18:23:10 2020 : rcvd [LCP EchoReq magic=0xa2a7dfde]
Sun Mar 22 18:23:10 2020 : sent [LCP EchoRep magic=0x1cd3efd3]
Sun Mar 22 18:23:10 2020 : rcvd [CHAP Challenge , name = “pptpd”]
Sun Mar 22 18:23:10 2020 : sent [CHAP Response , name = “\37777777742\37777777600\37777777634remote\37777777742\37777777600\37777777635”]
Sun Mar 22 18:23:10 2020 : rcvd [CHAP Failure “\37777777676X\37777777630”]
Sun Mar 22 18:23:10 2020 : MS-CHAP authentication failed:
Sun Mar 22 18:23:10 2020 : sent [LCP TermReq “Failed to authenticate ourselves to peer”]
Sun Mar 22 18:23:10 2020 : Connection terminated.
Sun Mar 22 18:23:10 2020 : Waiting for 1 child processes…
Sun Mar 22 18:23:10 2020 : script /usr/local/bin/pptp cecccic.hopto.org –nolaunchpppd, pid 3588
Sun Mar 22 18:23:10 2020 : Waiting for 1 child processes…
Sun Mar 22 18:23:10 2020 : script /usr/local/bin/pptp REMOTE_SERVER –nolaunchpppd, pid 3588
Sun Mar 22 18:23:10 2020 : Script /usr/local/bin/pptp REMOTE_SERVER –nolaunchpppd finished (pid 3588), status = 0x0

I´ve checked, and both the user and password are correct…

Marco Aurelio Simao

You need to change REMOTE_SERVER to your remote vpn server address.

Marcelo

HI, I can’t connect. What can I do? These are the messages what i get:
marcelourielcarnicero@iMac-de-Marcelo

% sudo pppd call pptp_config_file
Thu Mar 19 22:27:13 2020 : publish_entry SCDSet() failed: Success!
Thu Mar 19 22:27:13 2020 : publish_entry SCDSet() failed: Success!
Thu Mar 19 22:27:13 2020 : using link 0
Thu Mar 19 22:27:13 2020 : Using interface ppp0
Thu Mar 19 22:27:13 2020 : Connect: ppp0 /dev/ttys001
Thu Mar 19 22:27:14 2020 : sent [LCP ConfReq ]
Thu Mar 19 22:27:15 2020 : rcvd [LCP ConfReq ]
Thu Mar 19 22:27:15 2020 : lcp_reqci: returning CONFACK.
Thu Mar 19 22:27:15 2020 : sent [LCP ConfAck ]
Thu Mar 19 22:27:15 2020 : rcvd [LCP ConfAck ]
Thu Mar 19 22:27:15 2020 : rcvd [CHAP Challenge , name = “pptpd”]
Thu Mar 19 22:27:15 2020 : sent [CHAP Response , name = “muriel”]
Thu Mar 19 22:27:15 2020 : rcvd [CHAP Success “S=EB8EB3CCD20E56A5F278C8110F02558763B2FC96 M=Access granted”]
Thu Mar 19 22:27:15 2020 : MPPE required, but kernel has no support.
Thu Mar 19 22:27:15 2020 : sent [LCP TermReq “MPPE required but not available”]
Thu Mar 19 22:27:15 2020 : Connection terminated.
Thu Mar 19 22:27:15 2020 : Waiting for 1 child processes…
Thu Mar 19 22:27:15 2020 : script /users/local/bin/pptp vpn.preansa.es –nolaunchpppd, pid 55444
Thu Mar 19 22:27:15 2020 : Waiting for 1 child processes…
Thu Mar 19 22:27:15 2020 : script /users/local/bin/pptp vpn.preansa.es –nolaunchpppd, pid 55444
Thu Mar 19 22:27:15 2020 : Script /users/local/bin/pptp vpn.preansa.es –nolaunchpppd finished (pid 55444), status = 0x0

Do_alex

I’m having the same problem now…

Hope someone will find a fix !

Eddie

I connected to VPN but then I got no buffer space available, then I’ll lost my connection with VPN and also internet.
How could I solve this problem?

Do_alex

Sorry, I posted on the other page at first… my bad.

I was able to connect with the first method, when I was on macOs 10.14.

Now I get this, trying to connect to a Windows Server 2012 VPN :

Mon Mar 16 20:23:49 2020 : publish_entry SCDSet() failed: Success!
Mon Mar 16 20:23:49 2020 : publish_entry SCDSet() failed: Success!
Mon Mar 16 20:23:49 2020 : using link 0
Mon Mar 16 20:23:49 2020 : Using interface ppp0
Mon Mar 16 20:23:49 2020 : Connect: ppp0 /dev/ttys001
Mon Mar 16 20:23:50 2020 : sent [LCP ConfReq ]
Mon Mar 16 20:23:53 2020 : sent [LCP ConfReq ]
Mon Mar 16 20:23:56 2020 : sent [LCP ConfReq ]
Mon Mar 16 20:23:59 2020 : sent [LCP ConfReq ]
Mon Mar 16 20:24:02 2020 : sent [LCP ConfReq ]
Mon Mar 16 20:24:05 2020 : sent [LCP ConfReq ]
Mon Mar 16 20:24:08 2020 : sent [LCP ConfReq ]
Mon Mar 16 20:24:11 2020 : sent [LCP ConfReq ]
Mon Mar 16 20:24:14 2020 : sent [LCP ConfReq ]
Mon Mar 16 20:24:17 2020 : sent [LCP ConfReq ]
Mon Mar 16 20:24:20 2020 : LCP: timeout sending Config-Requests
Mon Mar 16 20:24:20 2020 : Connection terminated.
Mon Mar 16 20:24:20 2020 : Waiting for 1 child processes…

ToughGuy

I had the same issue as Do_alex until I moved into the directory with the config file and executed from there. So, in Terminal.app:

cd /etc/ppp/peers
sudo pppd call pptp_config_file

After doing this, I started getting rcvd info and then encountered an “auth eap” authentication issue. Got around this by opening the config file and added the following lines below “noauth”:

refuse-eap
refuse-chap
refuse-mschap

Bingo, I’m now successfully connecting. After making the connection, pptp surged to using about 90% of the cpu, but has since settled down. Thanks, Filip and Do_Alex! I posted the steps I used, here:

François

Doesn’t work on Catalina, I still have connection terminated after timeout 🙁

Sohail

I built the pptp myself and tried connecting. Here is what I get:

sudo pppd call pptp_vpn_config_file

Sohail

Forgot to mention that the same happened with the built file I downloaded from your link.

Stranger

Make sure when you run “sudo pppd call pptp_config_file” instead of “sudo pppd call pptp_vpn_config_file”, the filename in “/etc/ppp/peers/” should matche the call command.

admin

Thanks, I have updated the text.

I thinks its works. isn’t?

sudo pppd call VPNpptp
Mon Mar 9 15:35:13 2020 : publish_entry SCDSet() failed: Success!
Mon Mar 9 15:35:13 2020 : publish_entry SCDSet() failed: Success!
Mon Mar 9 15:35:13 2020 : using link 0
Mon Mar 9 15:35:13 2020 : Using interface ppp0
Mon Mar 9 15:35:13 2020 : Connect: ppp0 /dev/ttys001
Mon Mar 9 15:35:14 2020 : sent [LCP ConfReq ]
Mon Mar 9 15:35:15 2020 : rcvd [LCP ConfReq ]
Mon Mar 9 15:35:15 2020 : lcp_reqci: returning CONFACK.
Mon Mar 9 15:35:15 2020 : sent [LCP ConfAck ]
Mon Mar 9 15:35:15 2020 : rcvd [LCP ConfRej ]
Mon Mar 9 15:35:15 2020 : sent [LCP ConfReq ]
Mon Mar 9 15:35:15 2020 : rcvd [LCP ConfAck ]
Mon Mar 9 15:35:15 2020 : rcvd [LCP EchoReq magic=0x99455b9f]
Mon Mar 9 15:35:15 2020 : sent [LCP EchoRep magic=0x177c3e15]
Mon Mar 9 15:35:15 2020 : rcvd [CHAP Challenge , name = “pptpd”]
Mon Mar 9 15:35:15 2020 : sent [CHAP Response , name = “ankitthakor”]
Mon Mar 9 15:35:15 2020 : rcvd [CHAP Success “S=DD0E908A0EAEA31C81C4C54AE2F693E5804E96C8”]
Mon Mar 9 15:35:15 2020 : MPPE required, but kernel has no support.
Mon Mar 9 15:35:15 2020 : sent [LCP TermReq “MPPE required but not available”]
Mon Mar 9 15:35:15 2020 : Connection terminated.
Mon Mar 9 15:35:15 2020 : Waiting for 1 child processes…
Mon Mar 9 15:35:15 2020 : script /usr/local/bin/pptp bh.hma.rocks –nolaunchpppd, pid 1089
Mon Mar 9 15:35:15 2020 : Waiting for 1 child processes…
Mon Mar 9 15:35:15 2020 : script /usr/local/bin/pptp bh.hma.rocks –nolaunchpppd, pid 1089
Mon Mar 9 15:35:15 2020 : Script /usr/local/bin/pptp bh.hma.rocks –nolaunchpppd finished (pid 1089), status = 0x0

Klaude

Did you resolve this?

Shayne

Need a bit of help. My local subnet is 192.168.12.0/24 and the remote is 192.168.237.0/24 — the connection seems to be connected

sudo pppd call testing
Password:
Thu Feb 27 12:42:49 2020 : publish_entry SCDSet() failed: Success!
Thu Feb 27 12:42:49 2020 : publish_entry SCDSet() failed: Success!
Thu Feb 27 12:42:49 2020 : using link 0
Thu Feb 27 12:42:49 2020 : Using interface ppp0
Thu Feb 27 12:42:49 2020 : Connect: ppp0 /dev/ttys001
Thu Feb 27 12:42:50 2020 : sent [LCP ConfReq ]
Thu Feb 27 12:42:50 2020 : rcvd [LCP ConfReq ]
Thu Feb 27 12:42:50 2020 : lcp_reqci: returning CONFACK.
Thu Feb 27 12:42:50 2020 : sent [LCP ConfAck ]
Thu Feb 27 12:42:50 2020 : rcvd [LCP ConfAck ]
Thu Feb 27 12:42:50 2020 : rcvd [CHAP Challenge , name = “”]
Thu Feb 27 12:42:50 2020 : sent [CHAP Response , name = “admin”]
Thu Feb 27 12:42:50 2020 : rcvd [CHAP Success “S=6D52CED2A8DA9778ED5D33E5358C3D78A53B0653”]
Thu Feb 27 12:42:50 2020 : sent [IPCP ConfReq ]
Thu Feb 27 12:42:50 2020 : sent [ACSCP ConfReq ]
Thu Feb 27 12:42:50 2020 : rcvd [IPCP ConfReq ]
Thu Feb 27 12:42:50 2020 : ipcp: returning Configure-ACK
Thu Feb 27 12:42:50 2020 : sent [IPCP ConfAck ]
Thu Feb 27 12:42:50 2020 : rcvd [CCP ConfReq ]
Thu Feb 27 12:42:50 2020 : sent [CCP ConfReq/> Thu Feb 27 12:42:50 2020 : sent [CCP ConfRej ]
Thu Feb 27 12:42:50 2020 : rcvd [IPCP ConfRej ]
Thu Feb 27 12:42:50 2020 : sent [IPCP ConfReq ]
Thu Feb 27 12:42:50 2020 : rcvd [LCP ProtRej 82 35 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01]
Thu Feb 27 12:42:50 2020 : rcvd [CCP ConfAck/> Thu Feb 27 12:42:50 2020 : rcvd [CCP ConfReq/> Thu Feb 27 12:42:50 2020 : sent [CCP ConfAck/> Thu Feb 27 12:42:50 2020 : rcvd [IPCP ConfNak ]
Thu Feb 27 12:42:50 2020 : sent [IPCP ConfReq ]
Thu Feb 27 12:42:50 2020 : rcvd [IPCP ConfAck ]
Thu Feb 27 12:42:50 2020 : ipcp: up
Thu Feb 27 12:42:50 2020 : local IP address 192.168.237.1
Thu Feb 27 12:42:50 2020 : remote IP address 192.168.237.254
Thu Feb 27 12:42:50 2020 : Received protocol dictionaries
Thu Feb 27 12:42:50 2020 : Received acsp/dhcp dictionaries
Thu Feb 27 12:42:50 2020 : Committed PPP store
Thu Feb 27 12:42:50 2020 : Received acsp/dhcp dictionaries
Thu Feb 27 12:42:50 2020 : Committed PPP store

and I see this in my routing table:

$ netstat -nr
Routing tables

Internet:
Destination Gateway Flags Netif Expire
default link#18 UCS ppp0
default 192.168.12.1 UGScI en0
REMOTEADR link#18 UHWIi ppp0
127 127.0.0.1 UCS lo0
127.0.0.1 127.0.0.1 UH lo0
169.254 link#5 UCS en0 !
192.168.12 link#5 UCS en0 !
192.168.12.1/32 link#5 UCS en0 !
192.168.12.1 c0:ea:e4:6:41:20 UHLWIir en0 84
192.168.12.99/32 link#5 UCS en0 !
192.168.237.1 ppp0 UHS ppp0
192.168.237.254 192.168.237.1 UH ppp0
224.0.0/4 link#18 UmCS ppp0
224.0.0/4 link#5 UmCSI en0 !
224.0.0.251 1:0:5e:0:0:fb UHmLWI en0
239.255.255.250 1:0:5e:7f:ff:fa UHmLWI en0
255.255.255.255/32 link#18 UCS ppp0
255.255.255.255/32 link#5 UCSI en0 !

but when I try to go to 192.168.237.254 in my browser, it just sits there.

When I connect on my Windows PC using the built in PPTP I am able to hit that URL in my browser.

Nailur

I have an issue like this. it seems connected, but can’t access the URL, also can’t access other site like google, facebook, youtube, etc.

Источник