Wave arts tube saturator mac os

Wave Arts Tube Saturator v1.36 / v1.38 (WIN MAC)

 Wave Arts Tube Saturator v1.36 / v1.38 (WIN MAC) free download for mac torrent

Name	Wave Arts Tube Saturator v1.36 v1.38.zip
Size	94.98 MB
Created on	2019-02-19 22:04:56
Hash	ea634f243e971a09839deb0df79c2f38de858d83
Files	Wave Arts Tube Saturator v1.36 v1.38.zip (94.98 MB)

Wave Arts Tube Saturator v1.36 / v1.38 (WIN MAC)

Tube Saturator is the world’s most accurate real time tube amp plug-in. Unlike other tube simulators, which use radically simplified models, Tube Saturator uses state of the art circuit simulation technology to capture every nuance of an analog circuit. With circuit simulation, the analog schematic (consisting of the individual resistors, capacitors, tubes, and so on) completely defines the signal processing. The schematic is converted into a system of non-linear differential equations which is solved at each sampling period, in realtime. That’s mathematical talk for “it sounds exactly like the analog circuit”.

The circuit simulation technology is extremely CPU intensive, and hence we are only able to simulate very simple circuits at this time. A fast computer is highly recommended to run the plug-in. Tube Saturator is in fact a basic circuit consisting of a Baxandall type three-band EQ feeding two 12AX7 triode preamp stages. It’s similar to preamp stages you’d find in a guitar amp, but it is by no means a complete guitar amplifier model— that would be way too expensive to simulate even with today’s fast CPUs. However, it is extremely accurate, and hence you can get the same distortion and tonal characteristics that you’d expect from a real tube preamp.

Use Tube Saturator to add a bit of analog warmth to recordings, or increase the drive for some distortion. You can use it as a saturating peak limiter too.

Increasing the Drive control increases the (digital) input gain while decreasing the (digital) output gain, so you can easily adjust distortion levels. The FAT switch changes the bias circuit of the first preamp stage to increase gain.

Источник

Wave arts tube saturator mac os

Tube Saturator 2 is a super accurate circuit simulation of a tube pre-amp with analog EQ, which can be overdriven gently for warming effects, or cranked for fat distortion. Like its predecessor, Tube Saturator, TS-2 is based on circuit simulation technology to capture every nuance of an analog circuit. The circuit consisting of the individual tubes, resistors, and capacitors is converted into a mathematical system of equations which is numerically solved to produce the exact same sound as a real circuit. But while the original consumed large amounts of CPU power, TS-2 is now super efficient. The Saturation section of TS-2 runs about 7x faster than the original and yet the modelling is even more accurate. TS-2 includes the original circuit simulation of the three band Baxandall type EQ as found in many guitar amplifiers.

In addition to this breakthrough improvement in speed, TS-2 has many new features. You can switch between 12AX7 and 12AU7 tubes for different harmonic characteristics. The EQ can be switched to run pre or post saturation. Saturation and EQ are separately switchable. Also there is a 2x oversampling mode using a very high quality resampler algorithm. Use 2x mode to attenuate aliased distortion harmonics. Also new is a mix control to blend the processed sound with the original. And finally, TS-2 has a gorgeous new interface.

For more information via video demos, see the , and also see .

Tired of square wave clipping distortion? Try the demo. Tube Saturator 2 will not disappoint.

• Accurate tube preamp simulator using circuit simulation technology
• Two common cathode preamp stages
• 12AX7 and 12AU7 tube models
• Drive control for distortion adjustment
• Baxandall 3-band analog EQ
• Saturation and EQ bypass switches
• High quality 2X oversampling mode
• Wet/dry mix control
• Analog style metering
• No latency
• Up to 192 kHz sampling rate
• Mono or stereo

Requires a host program that supports audio plug-ins. iLok licensing supported but not required.

Macintosh – AU, VST3, AAX

• OS-X 10.11 to MacOS 11 (Big Sur)
• Apple M1 chips supported (AU and VST3)
• AAX – Pro Tools 11 and higher
• 64-bit hosts only

Windows – VST2, VST3, AAX

• Windows 7/8/10
• AAX – Pro Tools 10.3.5 and higher
• 32-bit and 64-bit hosts supported

Copyright © 1998–2021 Wave Arts, Inc. All rights reserved.

Источник

Wave Arts Tube Saturator v1.35 WIN OSX

30 March 2016 | WiN: 37.9 MB | OSX: 40.9 MB
Tube Saturator is the world’s most accurate real time tube amp plug-in. Unlike other tube simulators, which use radically simplified models, Tube Saturator uses state of the art circuit simulation technology to capture every nuance of an analog circuit. With circuit simulation, the analog schematic (consisting of the individual resistors, capacitors, tubes, and so on) completely defines the signal processing. The schematic is converted into a system of non-linear differential equations which is solved at each sampling period, in realtime. That’s mathematical talk for “it sounds exactly like the analog circuit”.

The circuit simulation technology is extremely CPU intensive, and hence we are only able to simulate very simple circuits at this time. A fast computer is highly recommended to run the plug-in. Tube Saturator is in fact a basic circuit consisting of a Baxandall type three-band EQ feeding two 12AX7 triode preamp stages. It’s similar to preamp stages you’d find in a guitar amp, but it is by no means a complete guitar amplifier model— that would be way too expensive to simulate even with today’s fast CPUs. However, it is extremely accurate, and hence you can get the same distortion and tonal characteristics that you’d expect from a real tube preamp.

Use Tube Saturator to add a bit of analog warmth to recordings, or increase the drive for some distortion. You can use it as a saturating peak limiter too.

Increasing the Drive control increases the (digital) input gain while decreasing the (digital) output gain, so you can easily adjust distortion levels. The FAT switch changes the bias circuit of the first preamp stage to increase gain.

Tech Specs
Accurate tube preamp simulator using circuit simulation technology
Two common cathode preamp stages
12AX7 and 12AU7 tube models
Drive control for distortion adjustment
Baxandall 3-band analog EQ
Saturation and EQ bypass switches
High quality 2X oversampling mode
Wet/dry mix control
Analog style metering
No latency
Up to 192 kHz sampling rate
Mono or stereo

Change Log:
AAX format fixes:
Master Restoration Suite: individual MRS plugs showing incorrect parameter values is fixed.
All plugs: fixed touch automation, parameters used to oscillate during touch automation.
MultiDynamics AAX DSP: fixed issue where certain bands would not show any signal level after preset load, requiring close/open.
Panorama: fixed disappearing control at elevations below zero.

All formats fixes:
Panorama: fixed CIPIC HRTFs missing from individual installer payload, Mac only.
Fixed version numbers that appear in Get Info popups for all Mac plugs.

Источник

Wave arts tube saturator mac os

Tube Saturator Vintage is a free reissue of the original Tube Saturator. It uses circuit simulation technology to faithfully reproduce the sound of a dual triode preamp. While it sounds great, the circuit simulation technology is very CPU intensive, that’s why we developed its successor, Tube Saturator 2. Tube Saturator 2 is vastly more efficient, nearly identical in simulation accuracy, and adds other features. However, some users prefer the sound of the original and request it, hence we have released it as a free plug.

Here’s the original Tube Saturator description:

Tube Saturator is the world’s most accurate real time tube amp plug-in. Unlike other tube simulators, which use radically simplified models, Tube Saturator uses state of the art circuit simulation technology to capture every nuance of an analog circuit. With circuit simulation, the analog schematic (consisting of the individual resistors, capacitors, tubes, and so on) completely defines the signal processing. The schematic is converted into a system of non-linear differential equations which is solved at each sampling period, in realtime. That’s mathematical talk for “it sounds exactly like the analog circuit”.

Tube Saturator is in fact a basic circuit consisting of a Baxandall type three-band EQ feeding two 12AX7 triode preamp stages, similar to preamp stages you’d find in a guitar or high fidelity amp, and hence you can get the same distortion and tonal characteristics that you’d get from saturating a real tube preamp. The circuit simulation technology is extremely CPU intensive and a fast computer is recommended to run the plug-in.

Increasing the Drive control increases the (digital) input gain while decreasing the (digital) output gain, so you can easily adjust distortion levels. The FAT switch changes the bias circuit of the first preamp stage to increase gain and saturation.

Use Tube Saturator to add a bit of analog warmth to recordings, or increase the drive for some distortion. You can use it as a saturating peak limiter too.

Sound Samples (by Tim van Geelen)

This is a small industrial beat, with a 303 on top (filter gradually opening up). The first file is the dry signal, then with the 303 driving Tube Saturator hard. You can really hear it getting much more aggressive and fat.

A simple 8 beat, first dry, then with Tube Saturator adding some lows, highs and lots of drive. It really accentuates the low end low-mid ranges and makes everything much fatter.

A muffled vocal line made much warmer, brighter and sizzling with some high-end boost and drive from Tube Saturator.

Источник

Music create: VST инструменты | Эффекты | Сэмплы | Скачать бесплатно программы для создания музыки

Wave Arts Tube Saturator 2 v2.1.3 (Team R2R) — плагин симулятор ламповых усилителей

Wave Arts — Tube Saturator 2 — это сверхточное схемное моделирование лампового предусилителя с аналоговым эквалайзером, который можно слегка перегружать для согревающих эффектов или крутить для искажения жира. Как и его предшественник, ламповый сатуратор, TS2 основан на технологии моделирования схем, позволяющей улавливать все нюансы аналоговой схемы.

The circuit consisting of the individual tubes, resistors, and capacitors is converted into a mathematical system of equations which is numerically solved to produce the exact same sound as a real circuit. But while the original consumed large amounts of CPU power, TS-2 is now super efficient. The Saturation section of TS-2 runs about 7x faster than the original and yet the modelling is even more accurate. TS-2 includes the original circuit simulation of the three band Baxandall type EQ as found in many guitar amplifiers.

In addition to this breakthrough improvement in speed, TS-2 has many new features. You can switch between 12AX7 and 12AU7 tubes for different harmonic characteristics. The EQ can be switched to run pre or post saturation. Saturation and EQ are separately switchable. Also there is a 2x oversampling mode using a very high quality resampler algorithm. Use 2x mode to attenuate aliased distortion harmonics. Also new is a mix control to blend the processed sound with the original. And finally, TS-2 has a gorgeous new interface.

Источник