Windows Authentication

Overview

The element defines configuration settings for the Internet Information Services (IIS) 7 Windows authentication module. You can use Windows authentication when your IIS 7 server runs on a corporate network that is using Microsoft Active Directory service domain identities or other Windows accounts to identify users. Because of this, you can use Windows authentication whether or not your server is a member of an Active Directory domain.

Windows authentication (formerly named NTLM, and also referred to as Windows NT Challenge/Response authentication) is a secure form of authentication because the user name and password are hashed before being sent across the network. When you enable Windows authentication, the client browser sends a strongly hashed version of the password in a cryptographic exchange with your Web server.

Windows authentication supports two authentication protocols, Kerberos and NTLM, which are defined in the

element. When you install and enable Windows authentication on IIS 7, the default protocol is Kerberos. The element can also contain a useKernelMode attribute that configures whether to use the kernel mode authentication feature that is new to Windows Server 2008.

Windows authentication is best suited for an intranet environment for the following reasons:

• Client computers and Web servers are in the same domain.
• Administrators can make sure that every client browser is Internet Explorer 2.0 or later.
• HTTP proxy connections, which are not supported by NTLM, are not required.
• Kerberos version 5 requires a connection to Active Directory, which is not feasible in an Internet environment.

New in IIS 7.5

The element was introduced in IIS 7.5, which allows you to configure the settings for the new extended protection features that have been integrated into Windows authentication.

Compatibility

Version	Notes
IIS 10.0	The element was not modified in IIS 10.0.
IIS 8.5	The element was not modified in IIS 8.5.
IIS 8.0	The element was not modified in IIS 8.0.
IIS 7.5	The element was added in IIS 7.5.
IIS 7.0	The element was introduced in IIS 7.0.
IIS 6.0	The element replaces portions of the IIS 6.0 AuthType and AuthFlags metabase properties.

Setup

The default installation of IIS 7 and later does not include the Windows authentication role service. To use Windows authentication on IIS, you must install the role service, disable Anonymous authentication for your Web site or application, and then enable Windows authentication for the site or application.

After you install the role service, IIS 7 commits the following configuration settings to the ApplicationHost.config file.

Windows Server 2012 or Windows Server 2012 R2

1. On the taskbar, click Server Manager.
2. In Server Manager, click the Manage menu, and then click Add Roles and Features.
3. In the Add Roles and Features wizard, click Next. Select the installation type and click Next. Select the destination server and click Next.
4. On the Server Roles page, expand Web Server (IIS), expand Web Server, expand Security, and then select Windows Authentication. Click Next.
   .
5. On the Select features page, click Next.
6. On the Confirm installation selections page, click Install.
7. On the Results page, click Close.

Windows 8 or Windows 8.1

1. On the Start screen, move the pointer all the way to the lower left corner, right-click the Start button, and then click Control Panel.
2. In Control Panel, click Programs and Features, and then click Turn Windows features on or off.
3. Expand Internet Information Services, expand World Wide Web Services, expand Security, and then select Windows Authentication.
   
4. Click OK.
5. Click Close.

Windows Server 2008 or Windows Server 2008 R2

1. On the taskbar, click Start, point to Administrative Tools, and then click Server Manager.
2. In the Server Manager hierarchy pane, expand Roles, and then click Web Server (IIS).
3. In the Web Server (IIS) pane, scroll to the Role Services section, and then click Add Role Services.
4. On the Select Role Services page of the Add Role Services Wizard, select Windows Authentication, and then click Next.
   
5. On the Confirm Installation Selections page, click Install.
6. On the Results page, click Close.

Windows Vista or Windows 7

1. On the taskbar, click Start, and then click Control Panel.
2. In Control Panel, click Programs and Features, and then click Turn Windows Features on or off.
3. Expand Internet Information Services, then World Wide Web Services, then Security.
4. Select Windows Authentication, and then click OK.
   

How To

How to enable Windows authentication for a Web site, Web application, or Web service

Open Internet Information Services (IIS) Manager:

If you are using Windows Server 2012 or Windows Server 2012 R2:

• On the taskbar, click Server Manager, click Tools, and then click Internet Information Services (IIS) Manager.

If you are using Windows 8 or Windows 8.1:

• Hold down the Windows key, press the letter X, and then click Control Panel.
• Click Administrative Tools, and then double-click Internet Information Services (IIS) Manager.

If you are using Windows Server 2008 or Windows Server 2008 R2:

• On the taskbar, click Start, point to Administrative Tools, and then click Internet Information Services (IIS) Manager.

If you are using Windows Vista or Windows 7:

• On the taskbar, click Start, and then click Control Panel.
• Double-click Administrative Tools, and then double-click Internet Information Services (IIS) Manager.

In the Connections pane, expand the server name, expand Sites, and then the site, application, or Web service for which you want to enable Windows authentication.

Scroll to the Security section in the Home pane, and then double-click Authentication.

In the Authentication pane, select Windows Authentication, and then click Enable in the Actions pane.

How to enable Extended Protection for Windows authentication

Open Internet Information Services (IIS) Manager:

If you are using Windows Server 2012 or Windows Server 2012 R2:

• On the taskbar, click Server Manager, click Tools, and then click Internet Information Services (IIS) Manager.

If you are using Windows 8 or Windows 8.1:

• Hold down the Windows key, press the letter X, and then click Control Panel.
• Click Administrative Tools, and then double-click Internet Information Services (IIS) Manager.

If you are using Windows Server 2008 or Windows Server 2008 R2:

• On the taskbar, click Start, point to Administrative Tools, and then click Internet Information Services (IIS) Manager.

If you are using Windows Vista or Windows 7:

• On the taskbar, click Start, and then click Control Panel.
• Double-click Administrative Tools, and then double-click Internet Information Services (IIS) Manager.

In the Connections pane, expand the server name, expand Sites, and then the site, application, or Web service for which you want to enable Extended Protection for Windows authentication.

Scroll to the Security section in the Home pane, and then double-click Authentication.

In the Authentication pane, select Windows Authentication.

Click Enable in the Actions pane.

Click Advanced Settings in the Actions pane.

When the Advanced Settings dialog box appears, select one of the following options in the Extended Protection drop-down menu:

• Select Accept if you want to enable extended protection while providing down-level support for clients that do not support extended protection.
• Select Required if you want to enable extended protection without providing down-level support.
  

Click OK to close the Advanced Settings dialog box.

Configuration

The element is configurable at the site, application, or virtual directory level in the ApplicationHost.config file.

Attributes

Attribute	Description
authPersistNonNTLM	Optional Boolean attribute.

Specifies whether IIS automatically reauthenticates every non-NTLM (for example, Kerberos) request, even those on the same connection. False enables multiple authentications for the same connections.

Note: A setting of true means that the client will be authenticated only once on the same connection. IIS will cache a token or ticket on the server for a TCP session that stays established.

The default is false . authPersistSingleRequest Optional Boolean attribute.

Setting this flag to true specifies that authentication persists only for a single request on a connection. IIS resets the authentication at the end of each request, and forces reauthentication on the next request of the session.

The default value is false . enabled Required Boolean attribute.

Specifies whether Windows authentication is enabled.

The default value is false . useKernelMode Optional Boolean attribute.

Specifies whether Windows authentication is done in kernel mode. True specifies that Windows authentication uses kernel mode.

Kernel-mode authentication may improve authentication performance and prevent authentication problems with application pools that are configured to use a custom identity.

As a best practice, do not disable this setting if you use Kerberos authentication and have a custom identity on the application pool.

The default is true .

Child Elements

Element	Description
extendedProtection	Optional element.

Specifies extended protection options for Windows authentication.

Note: This element was added in IIS 7.5. providers Optional element.

Specifies security support providers used for Windows authentication.

Configuration Sample

The following default element is configured at the root ApplicationHost.config file in IIS 7.0, and disables Windows authentication by default. It also defines the two Windows authentication providers for IIS 7.0.

The following example enables Windows authentication and disables Anonymous authentication for a Web site named Contoso.

Sample Code

The following examples disable Anonymous authentication for a site named Contoso, then enable Windows authentication for the site.

Handling Windows authentication pop up

Below is my AutoIt script (UI3_Authentication.au3) for handling a Windows authentication pop up.

Below is my Selenium code call to the above AutoIt exe file.

When I run the above Selenium file, it opens up the page and authentication pop up. But it is not inserting username and password; it waits for user input instead.

3 Answers 3

I resolved this. Actually, it was my bad. Previously, my code was like this:

I Added autoit code before my get() as follows, and it worked:

This works with my ChromeDriver. Hope it will be helpful

I faced the same problem. AutoIt works well with selenium if it is running in an «open» desktop. If I use a Virtual Machine with a open session(seeing what is happening), even minimized, it works fine, but if I close the remote desktop(session ends), AutoIt script shows success but do nothing.

The «solution» was to keep virtual machine «open» by connecting it with TightVNC. Even closing the window, the VNC keeps the logon alive and AutoIt works without problems.

Hope this info helps you. Its not a solution but maybe you can workaround it.

Not the answer you’re looking for? Browse other questions tagged selenium selenium-webdriver autoit or ask your own question.

Linked

Related

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

site design / logo © 2021 Stack Exchange Inc; user contributions licensed under cc by-sa. rev 2021.4.16.39093

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.