Windows copy command syntax and examples

Using copy command, we can copy files from one directory to another directory. This command is similar to the Linux cp command, but it does not match with the full functionality of cp. Windows copy command can be used to copy files only, we can’t copy directories.

The syntax and usecases of copy command are explained below with examples.

Copy the contents of a file to another file

Example: To copy a file from c:\data\file1.doc to D:\backup\file2.doc

If the destination file already exists you will be prompted for confirmation. To suppress this confirmation you can use /Y switch with copy command. This would be useful if you are executing copy command from a batch file.

If the destination file exists, the above command will overwrite the same without asking the user for confirmation.

Copy file to another directory

When we specify a directory path as the destination, the files will be copied with the same name. We can assign a different name by specifying the new name in the destination path. Example is shown below.

To copy the file 1.doc loated at c:\data\documents to the directory c:\data\newdocs

Copy files with white space in name

If the file name has white space within it, we can wrap up the name in double quotes.
Example: To copy file, my resume.doc to another folder

Copy multiple files

We can’t specify multiple file names in copy command. However, we can use wildcards to identify a group of files and then copy all of them in a single command.
For example, to copy all excel files from current folder to another folder F:\backup

To copy all files in current folder to another folder

Use of environment variables

We can use environment variables in the copy command to specify the path of the folders. Like USERPROFILE, SystemRoot, ProgramFiles, TEMP, WINDIR, APPDATA, HOMEPATH.

For example, to copy a file to a user’s documents folder

The above command copies the file to the My Documents folder of the current logged in user.

You may also want to read

Windows «copy» is funny. Type «copy 1 2» and the file «1» will be copied into a new file «2». Now separate them by a plus sign instead of a space (copy 1+2) and you’ll concatenate 1 and 2 and replace the old file «1» with the result of the concatenation!

Yes, we can concatenate two or more files using copy command. You need to separate the list of files using +. You can redirect the resultant data to a new file also.

The above command will not alter the file 1. It creates a new file 3 with the concatenated data of 1 & 2. If no file name is provided it stores the result in the first file.

My Win7 cannot find a copy command, and when i run xcopy, a window flashes and exits.

I have the same problem. If you solved it, could you please explain how?

If you can not find your copy.exe file, you can download it to your windows directory or C:\ Directory depending the setting on your OS you should also be able to copy and run it from system32 or system folder.

how can i combine 2 .exe files and be able to use both after concatenation

I want to copy 2 different files(.exe,.config) from source to destination server of windows.
can you please help me on this command.

Hello i have a problem with my cmd windows 7.when i try to copy a command. Like help > file.pdf. i mean in extension pdf because i have this problem only with .pdf extension but not with .txt.So whe i execute the command. No problem. Then when i go to open the file.pdf ftom user destination the file.pdf doesn’t open say that is corrupted.please do help me .thanks

i have a file contain many lines as sources and another file has the same numbre of lines as destinations. i want to copy first line as source( c:/test/*.txt) to first line in destination ( d:/test2/), secend line ( c:/test/*.pdf) to second line in destination ( E:/test3/)……

Can I use the DOS/Windows “COPY” command in a BAT file to copy a file or a short string of text to computer memory and then paste (Ctrl +V) that string or file into a document?

batch/bat to copy folder and content at once

I’m writing a batch script that does a copy. I want to script it to copy an entire folder. When I want to copy a single file, I do this

If I have a folder with this structure, is there a command to copy this entire folder with its contents all at once while preserving the exact structure.

5 Answers 5

if you have xcopy , you can use the /E param, which will copy directories and subdirectories and the files within them, including maintaining the directory structure for empty directories

xcopy is deprecated. Robocopy replaces Xcopy. It comes with Windows 8, 8.1 and 10.

robocopy has several advantages:

• copy paths exceeding 259 characters
• multithreaded copying

I suspect that the xcopy command is the magic bullet you’re looking for.

It can copy files, directories, and even entire drives while preserving the original directory hierarchy. There are also a handful of additional options available, compared to the basic copy command.

If your batch file only needs to run on Windows Vista or later, you can use robocopy instead, which is an even more powerful tool than xcopy , and is now built into the operating system. It’s documentation is available here.

I’ve been interested in the original question here and related ones.

For an answer, this week I did some experiments with XCOPY.

To help answer the original question, here I post the results of my experiments.

I did the experiments on Windows 7 64 bit Professional SP1 with the copy of XCOPY that came with the operating system.

For the experiments, I wrote some code in the scripting language Open Object Rexx and the editor macro language Kexx with the text editor KEdit.

XCOPY was called from the Rexx code. The Kexx code edited the screen output of XCOPY to focus on the crucial results.

The experiments all had to do with using XCOPY to copy one directory with several files and subdirectories.

The experiments consisted of 10 cases. Each case adjusted the arguments to XCOPY and called XCOPY once. All 10 cases were attempting to do the same copying operation.

Here are the main results:

(1) Of the 10 cases, only three did copying. The other 7 cases right away, just from processing the arguments to XCOPY, gave error messages, e.g.,

with no files copied.

Of the three cases that did copying, they all did the same copying, that is, gave the same results.

(2) If want to copy a directory X and all the files and directories in directory X, in the hierarchical file system tree rooted at directory X, then apparently XCOPY — and this appears to be much of the original question — just will NOT do that.

One consequence is that if using XCOPY to copy directory X and its contents, then CAN copy the contents but CANNOT copy the directory X itself; thus, lose the time-date stamp on directory X, its archive bit, data on ownership, attributes, etc.

Of course if directory X is a subdirectory of directory Y, an XCOPY of Y will copy all of the contents of directory Y WITH directory X. So in this way can get a copy of directory X. However, the copy of directory X will have its time-date stamp of the time of the run of XCOPY and NOT the time-date stamp of the original directory X.

This change in time-date stamps can be awkward for a copy of a directory with a lot of downloaded Web pages: The HTML file of the Web page will have its original time-date stamp, but the corresponding subdirectory for files used by the HTML file will have the time-date stamp of the run of XCOPY. So, when sorting the copy on time date stamps, all the subdirectories, the HTML files and the corresponding subdirectories, e.g.,

can appear far apart in the sort on time-date.

Hierarchical file systems go way back, IIRC to Multics at MIT in 1969, and since then lots of people have recognized the two cases, given a directory X, (i) copy directory X and all its contents and (ii) copy all the contents of X but not directory X itself. Well, if only from the experiments, XCOPY does only (ii).

So, the results of the 10 cases are below. For each case, in the results the first three lines have the first three arguments to XCOPY. So, the first line has the tree name of the directory to be copied, the ‘source’; the second line has the tree name of the directory to get the copies, the ‘destination’, and the third line has the options for XCOPY. The remaining 1-2 lines have the results of the run of XCOPY.

One big point about the options is that options /X and /O result in result

To see this, compare case 8 with the other cases that were the same, did not have /X and /O, but did copy.

These experiments have me better understand XCOPY and contribute an answer to the original question.

copying all contents of folder to another folder using batch file?

I have a folder in C:\Folder1

I want to copy all the contents of Folder1 to another location, D:\Folder2

How do I do this using a batch file?

12 Answers 12

xcopy.exe is the solution here. It’s built into Windows.

If you have robocopy,

if you want remove the message that tells if the destination is a file or folder you just add a slash:

xcopy /s c:\Folder1 d:\Folder2\

I see a lot of answers suggesting the use of xcopy. But this is unnecessary. As the question clearly mentions that the author wants THE CONTENT IN THE FOLDER not the folder itself to be copied in this case we can -:

Thats all xcopy can be used for if any subdirectory exists in C:\Folder1

RoboCopy did not work for me, and there are some good solutions here, but none explained the XCopy switches and what they do. Also you need quotes in case your path has spaces in it.

xcopy /i /e «C:\temp\folder 1» «C:\temp\folder 2»

Here is the documentation from Microsoft:

On my PC, xcopy and robocopy need also the path to them, i.e. C:\Windows\System32\xcopy.exe

That’s why I use simply «copy»: copy /y . \Folder1\File.txt . \Folder2\

This is how it is done! Simple, right?

Here’s a solution with robocopy which copies the content of Folder1 into Folder2 going trough all subdirectories and automatically overwriting the files with the same name:

/COPYALL copies all file information
/E copies subdirectories including empty directories
/IS includes the same files
/IT includes modified files with the same name

Note: it can be necessary to run the command as administrator, because of the argument /COPYALL . If you can’t: just get rid of it.

FYI. if you use TortoiseSVN and you want to create a simple batch file to xcopy (or directory mirror) entire repositories into a «safe» location on a periodic basis, then this is the specific code that you might want to use. It copies over the hidden directories/files, maintains read-only attributes, and all subdirectories and best of all, doesn’t prompt for input. Just make sure that you assign folder1 (safe repo) and folder2 (usable repo) correctly.

And, that’s it folks!

Add to your scheduled tasks and never look back.

I have written a .bat file to copy and paste file to a temporary folder and make it zip and transfer into a smb mount point, Hope this would help,

Batch file to copy files from one folder to another folder

I have a storage folder on a network in which all users will store their active data on a server. Now that server is going to be replaced by a new one due to place problem so I need to copy sub folders files from the old server storage folder to new server storage folder. I have below ex:

from \Oldeserver\storage\data & files to \New server\storage\data & files.

9 Answers 9

xcopy.exe is definitely your friend here. It’s built into Windows, so its cost is nothing.

Just xcopy /s c:\source d:\target

You’d probably want to tweak a few things; some of the options we also add include these:

• /s/e — recursive copy, including copying empty directories.
• /v — add this to verify the copy against the original. slower, but for the paranoid.
• /h — copy system and hidden files.
• /k — copy read-only attributes along with files. otherwise, all files become read-write.
• /x — if you care about permissions, you might want /o or /x .
• /y — don’t prompt before overwriting existing files.
• /z — if you think the copy might fail and you want to restart it, use this. It places a marker on each file as it copies, so you can rerun the xcopy command to pick up from where it left off.

If you think the xcopy might fail partway through (like when you are copying over a flaky network connection), or that you have to stop it and want to continue it later, you can use xcopy /s/z c:\source d:\target .

Batch file to copy directories recursively [closed]

Want to improve this question? Update the question so it focuses on one problem only by editing this post.

Closed 15 days ago .

Is there a way to copy directories recursively inside a .bat file? Is an example of this available?

4 Answers 4

Look into xcopy, which will recursively copy files and subdirectories.

There are examples, 2/3 down the page. Of particular use is:

To copy all the files and subdirectories (including any empty subdirectories) from drive A to drive B, type:

After reading the accepted answer’s comments, I tried the robocopy command, which worked for me (using the standard command prompt from Windows 7 64 bits SP 1):

You may write a recursive algorithm in Batch that gives you exact control of what you do in every nested subdirectory:

I wanted to replicate Unix/Linux’s cp -r as closely as possible. I came up with the following:

xcopy /e /k /h /i srcdir destdir

/e Copies directories and subdirectories, including empty ones.
/k Copies attributes. Normal Xcopy will reset read-only attributes.
/h Copies hidden and system files also.
/i If destination does not exist and copying more than one file, assume destination is a directory.

I made the following into a batch file ( cpr.bat ) so that I didn’t have to remember the flags:

Usage: cpr srcdir destdir

You might also want to use the following flags, but I didn’t:
/q Quiet. Do not display file names while copying.
/b Copies the Symbolic Link itself versus the target of the link. (requires UAC admin)
/o Copies directory and file ACLs. (requires UAC admin)