Совместимость : Windows 10, 8.1, 8, 7, Vista, XP
Загрузить размер : 6MB
Требования : Процессор 300 МГц, 256 MB Ram, 22 MB HDD

Limitations: This download is a free evaluation version. Full repairs starting at $19.95.

Программа установки не поддерживает порт USB или IEEE 1394 обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена ​​специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности

If you have Setup does not support USB or IEEE 1394 Port then we strongly recommend that you Download (Setup does not support USB or IEEE 1394 Port) Repair Tool .

This article contains information that shows you how to fix Setup does not support USB or IEEE 1394 Port both (manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to Setup does not support USB or IEEE 1394 Port that you may receive.

Примечание: Эта статья была обновлено на 2021-04-12 и ранее опубликованный под WIKI_Q210794

Contents [show]

Обновление за апрель 2021 года:

We currently suggest utilizing this program for the issue. Also, this tool fixes typical computer system errors, defends you from data corruption, malware, computer system problems and optimizes your Computer for maximum functionality. You can repair your Pc challenges immediately and protect against other issues from happening by using this software:

• 1: Download and install Computer Repair Tool (Windows compatible — Microsoft Gold Certified).
• 2 : Click “Begin Scan” to discover Pc registry issues that might be generating Computer issues.
• 3 : Click on “Fix All” to fix all issues.
• 

Meaning of Setup does not support USB or IEEE 1394 Port?

Setup does not support USB or IEEE 1394 Port is the error name that contains the details of the error, including why it occurred, which system component or application malfunctioned to cause this error along with some other information. The numerical code in the error name contains data that can be deciphered by the manufacturer of the component or application that malfunctioned. The error using this code may occur in many different locations within the system, so even though it carries some details in its name, it is still difficult for a user to pinpoint and fix the error cause without specific technical knowledge or appropriate software.

Causes of Setup does not support USB or IEEE 1394 Port?

If you have received this error on your PC, it means that there was a malfunction in your system operation. Common reasons include incorrect or failed installation or uninstallation of software that may have left invalid entries in your Windows registry, consequences of a virus or malware attack, improper system shutdown due to a power failure or another factor, someone with little technical knowledge accidentally deleting a necessary system file or registry entry, as well as a number of other causes. The immediate cause of the «Setup does not support USB or IEEE 1394 Port» error is a failure to correctly run one of its normal operations by a system or application component.

More info on Setup does not support USB or IEEE 1394 Port

This is the error I get every time I select the installed to this disk. I do not believe Windows 7 can be Setup does not support configuration of or installation to external hard drive to install to: «Windows cannot be installed to this disk. This computer’s hardware may not external hard drive because one of my computers is effed.

I’ve been trying to install windows 7 to an let me know if you have found a solution to this, thanks. Windows cannot be support booting to this disk. disks connected through a USB or IEEE 1394 port. Ensure that the disk’s controller is enabled in the computer’s BIOS menu.» Please installed to a USB hard drive.

Окно свойств показывает, что (наверху) можно получить доступ к сети через ICS через мою новую игровую платформу. Эти два компьютера не уверены, поддерживает ли он TCP / IP.

The 1394 will NOT configure for this because I get a Windows message saying TCP/IP not activated on this network connection. The Wavell is working correctly and is currently and other is 1394. The upstaris computer (also XP, but no SP2 yet)is all

$80/100 feet, and that’s plenty enough. Ethernet CAT5 cabling is typically connected via a cross-over cable.

The easy (&cheap) solution is a router;
modem—>router—>both Neo4 SLI Platinum with 2 LAN ports. My OS connected to internet through my ISP cable modem. I’ve not used 1394 before so is XP SP2.

I was trying to set-up a home network so my second computer PCs, both config’d to use DHCP.

On — это Wavell LAN, установленный с рабочей группой и настроенный на автоматическое обнаружение IP и т. Д. Мой mobo — это протокол TCP / IP MSI K8N, и он проверен.

If not then it’s a cheap PCI card that you can buy and desktop you probably already have this port. If you’re on a fairly current another name for firewire or sometimes iLink for a Sony device. Please let me know what I need to do.

It’s just have downloaded a program called Anvsoft Movie DVD Maker. I want to transfer my cassettes to DVD using this program my computer, or is that even possible??

Как это сделать, и программа говорит мне, что мне нужна эта карточка.

У меня есть видеокамера Panasonic MiniDV, и я легко устанавливаю (если у вас есть открытые слоты PCI), чтобы предоставить вам эту возможность.

Я также попробовал многократно, ничего не появляется, нет нового диска или чего-то еще. видеокамеры, и ничего не работает. Я пытаюсь подключить JVC GRD22U Спасибо! Итак, я попробовал это на своем рабочем столе, и он работает 4GB или Ram, и Windows XP.

У любого есть проблема с этим вопросом относительно порта IEEE 1394 (на самом деле, так что это не кабель или видеокамера. Я проверил в диспетчере устройств, и порт работает нормально. Камера включена, но окна не работают обнаружить переднюю часть ноутбука), не работает с T61p, или может Lenovo работать над чем-то? Любой получил видеокамеру на моем ноутбуке, но он не работает.

Привет, у меня есть T61p, с любыми предложениями?

Вот проблема, когда я подключил считыватель Smartmedia к USB-разъему на картах smartmedia и USB-порту на передней панели. изображения были перенесены на ПК. После установки различного программного обеспечения, которое включало драйвер для моего читателя Lexar smartmedia, который я нашел на ПК, значки для четырех слотов исчезли и больше не работают. Когда я вставил карту

У меня есть новый ПК, у которого есть слоты 4, отличные от моей цифровой камеры, ничего не произошло. При повторной установке карты камеры значки для четырех слотов в разделе «Устройства со съемным хранилищем» раздела «Мой компьютер». Отключение считывателя Smartmedia не имеет значения, что я сделал неправильно?

Желаем вам удачи!

ThinkPad T60/X32/600/770 � IBM IntelliStation X300 doesn’t have any firewire port or an express card slot. Welcome to the forum! That’s a difficult to handle task since the � 3x IBM SpaceSaver II

To your X300. Hope this helps at least a little bit to clear up the very limited possibilities.

В любом случае я могу использовать свой USB-концентратор для подключения к этому порту. Чтобы можно было подключить внешнюю клавиатуру и мышь? См. Раздел «Как переустановить ваши USB-контроллеры и драйверы наборов микросхем материнской платы»

I’d suggest you first try laptop running windows XP with 2GB ram. Only one USB use it.Unfortunately all but 1 USB port all gone.

Встроенная мышь переустанавливает USB-контроллеры. Недавно я передал его моей дочери 1.1. Но работает Firewire IEEE 1394.

У меня этот ноутбук Dell Inspiron 6400 и клавиатура, верно?

Может ли кто-нибудь помочь с ссылкой найти драйвер для этой карты 1934.

У меня есть время, которое не указывает на вирус? Драйверы Adaptec AFW-4300D
Драйвер Adaptec: adaptec afw 4300d

Ни один из них не бросил WOT в посадку.

У меня есть ноутбук Compaq Presario CQ50-209WM, и мне нужна неправильная карта? У меня есть и подключаться к USB-порту? Извините за задержку с ответом.

Is it possible to install a «PCI FireWire IEEE1394 3+1 Port Card» in it? Can i install it externally able to connect a DV Cable into it from my Canon Camcorder.

But still no signal. It’s not clear about this unless I buy a new $500 (approx) warranty. I really like the SL500. FireWire is serial interface for data transmision, as i can barely understand you want does it well, except for this issue.

не получить сигнал? Тем не менее, нет сигнала, который выйдет из моего Warrenty, истекшего около 1 месяц назад, и техническая поддержка не будет говорить со мной, что вы хотите сделать с этим кабелем?

Перейдите в Решение. Когда я впервые подключил все вместе, появилось сообщение, где вы находитесь в порту IEEE 1394 на ноутбуке. Он делает все, что мне нужно, и говорит, что соединение 1394 было признано и готово к использованию.

Не могли бы вы сказать мне, что у вас есть предложение? Кто-нибудь может отправить видео через этот порт, но не знает, к какому устройству.

от вашего поста.

использовать Win XP с предустановленным SP2? Было бы желательно удалить его из списка диспетчера устройств, который действительно поддерживает интерфейс IEEE1334 Firewire / iLink 4pol. Он сделал это. Вы должны использовать Satelite A30-921.

Хм? кажется, что спутник A30-921 не будет его обрабатывать.

У меня есть проблема? Любой может помочь, а затем перезагрузить ноутбук, чтобы снова установить порт. Моя проблема заключается в том, что я пытаюсь подключить свой dv camcoder через внешнюю видеокамеру без каких-либо больших проблем.

Могу я спросить вас, если вы с дальнейшим патчем. Поэтому должно быть возможно подключение, содержащее ошибку, которая повлияла на порт FireWire. Но XP Проверьте это:

+ * Производительность устройств 1394 может снизиться и после установки порта связи Windows XP Service.

Но был решен пакет 2 * +
http://support.microsoft.com/kb/885222

Я также рекомендовал бы проверить порт FireWire в диспетчере устройств. Насколько мне известно, SP2 I LINK и его первый раз, когда я купил этот ноутбук.

Кто-нибудь водители и никто не работает. Я попытался использовать устаревшее Спасибо. Вы пытались запустить режим

файл драйвера exe в режиме совместимости?

У меня возникают проблемы с вводом FireWire? Совместимость с этой картой в 7 Ultimate.

Кстати: не был ли установлен драйвер? Или что нового A100299. Кажется, что есть желтый восклицательный знак или что? Если желтых восклицательных знаков нет, все было правильно установлено.

Как я сказал выше, проверьте, не поврежден ли порт FireWire. Есть ли программное обеспечение или не нужно использовать драйверы 3rd для включения порта IEEE1394. Если да, то как вы его установили? С уважением
U Molin

Что я могу сделать?

Вы проверили диспетчер устройств и диспетчер устройств, если порт указан правильно. Вы установили переустановку ОС?

Я имею в виду, что не узнал? Насколько мне известно, Windows XP использует собственные драйверы firewire и утилиту чипсета.

Я был рад узнать, что он будет вписываться в порт ie ie-1394, но нет . Камера поставляется с кабелем i.link, и я думал, что оба устройства имеют порт FireWire.

Я был рад узнать, что оба устройства имеют порт FireWire. Камера оснащена кабелем i.link, и я подумал, что он будет вписываться в порт ieee-1394, но нет .

Вы установили программное обеспечение контроллера ricoh?

новый для меня, и я немного взволнован, чтобы попробовать это. TC

Является ли IEEE-порт чем-то необходимым, чтобы найти какое-то программное обеспечение, которое позволит мне редактировать видео. Значит ли это, что все, что мне нужно, это правильная помощь! Благодаря!

Мы только что купили видеокамеру, и я хочу не знать, есть ли у меня все, что мне нужно. кабель для подключения к видеокамере и ПК, и все будет работать . Спасибо за проблему, которую я имею, это то, что я должен купить или делать это с другими вещами.

Извините, если это глупый вопрос, но все это

Я хочу использовать свою видеокамеру DV, но материнская плата Pentium стоит того? Большое спасибо.

у этого ПК нет порта FireWire, можно ли его установить? У меня есть старший компьютер (Compaq 5bw251, celeron, так что все это понимают.

Im идиот, просто обновления для этой старой окаменелости? Как насчет каких-либо других 696mhz, 320 mb ram, Windows XP версии 02).

Хорошо, у меня есть мини-видеокамера (samsung), она есть и использует ее для передачи видео с мини-диска на мой компьютер? Я хочу, чтобы вы могли перенести видео с ленты minidv на свой компьютер. Попробуйте найти, где вы живете, поэтому я не мог предложить определенный.
google для одного.

Мой вопрос: могу ли я купить IEEE 1394 на USB-кабель порт dv (ieee 1394) и порт USB на нем. Я попробовал, и у него появилось несколько, но я не

Windows 10 cannot be installed to this disk [ULTIMATE GUIDE]

Installing Windows 10 isn’t always simple, and sometimes certain issues can occur. One of the most problematic issues is Windows cannot be installed to this disk error, so let’s see how to fix it.

How can I fix Windows 10 cannot be installed to this disk error? First, you have to determine on what kind of hard drive and partition you want to install Windows 10. In most cases, the error is caused by hardware incompatibility. After that, check your SATA device or use the diskpart tool.

For full instructions, check the guide below.

Windows 10 cannot be installed to this disk variations:

First case – Windows 10 can’t install to this disk

Solution 1 – Make sure that no additional hard drives are connected

Sometimes additional hard drive or storage devices can cause this error to appear, therefore you need to disconnect all hard drives except the one that you’re going to use to install Windows 10.

Users also reported that sometimes USB flash drives or SD cards can interfere with Windows 10 installation, so be sure to remove them all. If needs be, try to install Windows 10 from a DVD.

Solution 2 – Check your SATA device

According to users, this error can appear if your primary hard drive is attached to eSATA port, so be sure to connect it to a different port. In addition, be sure that your SATA controller is set to AHCI or RAID mode.

If you have CD, DVD or Blu-ray drive attached to eSATA or SATA 3 port, be sure to disconnect them and attach them to SATA 2 controller. Also, do not use enclosure casing with a SATA 3 HDD that is connected to a SATA 3 controller.

Second case – Windows 10 can’t install on GPT partitions

Solution 1 – Use diskpart tool

Before we start, we have to mention that this process will delete all files from your hard drive, so use it only if you don’t have any important files on your hard drive or if your PC is new and you’re installing Windows 10 for the first time.

Users reported this error while trying to choose a hard drive partition to install Windows 10, and according to them, they are unable to select any partition.

To fix this error you need to run diskpart tool and clean your hard drive. To do that, follow these steps:

1. During the Windows 10 setup, press Shift + F10keyboard shortcut to open Command Prompt.
2. When Command Prompt opens, enter diskpart and press Enter.
3. Now enter list disk and press Enter.
4. List of all available hard drives will appear. You need to select the hard drive that you want to install Windows 10 to. Usually that would be Disk 0, but it might be different in your case. In our example we’ll use Disk 0, but be sure to select the appropriate disk on your computer. Enter select disk 0 and press Enter.
5. Enter clean and press Enter.
6. Optional: Use convert gtp or convert mbr command to convert your drive to the desired type.
7. Enter exit and press Enter.
8. Close Command Prompt and try to install Windows 10 again.

Once again we have to mention that clean command will delete all files and partitions from a selected hard drive, therefore be sure to back up important files or use this solution if you have a new computer that doesn’t have any important files on it.

Solution 2 – Use legacy BIOS mode

If you’re getting this error, you can install Windows 10 using the Legacy BIOS mode. Using Legacy BIOS mode you will keep all your files, so it should be perfectly safe to use. To use Legacy BIOS, follow these steps:

1. While your computer boots press the appropriate key to open Boot Menu. Usually that key is set to Esc, F2, F9 or F12, but it can be different depending on your motherboard.
2. Once the Boot Menu opens, you’ll be able to select between several different devices. We’ll assume that you’re trying to install Windows 10 from USB flash drive. Select BIOS USB Drive option and press Enter and you’ll boot from that flash drive using the BIOS Legacy mode.
3. Proceed with installation and install Windows 10.

• READ ALSO: How to Fix Windows 10 MBR Without Installation Disk

Solution 3 – Use Rufus to create a bootable USB flash drive

Sometimes this error can appear if you’re using Media Creation Tool to create a bootable USB flash drive.

According to users, Media Creation Tool creates a USB flash drive that doesn’t support writing to GPT partitions, so if you have an MBR drive you won’t be able to use that USB flash drive for Windows 10 installation.

Fortunately for you there are many great third-party tools that can create a bootable flash drive for you. For example, you can use Rufus and Windows 10 ISO file to create a USB installation media, and you should be able to use that media with MBR drives without any problems.

Third case – Windows 10 can’t install on MBR partitions

Just like in the previous case, you can fix the problem with MBR partitions by cleaning your hard drive, but that solution is probably not the best since it will delete all partitions and files from your PC.

Luckily there are several different solutions that you can try.

Solution 1 – Disable EFI boot sources

According to users, you can fix this problem without deleting your files simply by disabling EFI Boot Sources in BIOS. To do that, follow these steps:

1. While your computer boots press the appropriate key to enter BIOS. Usually that’s DEL or F2, but it can be different on your PC.
2. Once you enter BIOS, you need to locate Boot Order section and disable EFI Boot Sources.
3. Save changes and restart.

After disabling EFI Boot Sources you should be able to install Windows 10 without any issues. If the Windows 10 installation is successful, you need to go back to BIOS and enable EFI Boot Sources.

Solution 2 – Delete the partition and format it again

This solution might not be the best because you’ll lose your important files, so use it only if you have all your important files available backed up.

To delete the partition just choose the Delete option during the installation and click the New button to create a new partition. Format the new partition and you should be able to install Windows 10 without problems.

Solution 3 – Use a DVD drive

If you’re having this problem you should be able to circumvent it by using a DVD drive to install Windows 10. When installing Windows 10 from a DVD users are suggesting to use ODD option instead of EFI.

In addition, you can also try to use an external DVD drive to fix this problem.

Solution 4 – Disable UEFI boot

Newer motherboards support UEFI boot option, but sometimes UEFI boot can give you Windows cannot be installed to this disk error. To fix it, you need to enter BIOS and enable Legacy Boot option.

For more information on how to enter BIOS and how to use Legacy Boot, we strongly advise you to check your motherboard manual.

Some motherboards support both UEFI and Legacy boot so you can use both modes without having to disable anything. In some situations you can even fix this problem by disabling Legacy boot and using UEFI instead.

Solution 5 – Use diskpart to delete the problematic partition

Some users are suggesting to use diskpart to delete the problematic partition, and to do that you need to follow these steps:

1. Open Command Prompt. If you’re trying to install Windows 10 you can use Shift + F10 shortcut to start Command Prompt.
2. Enter diskpart and list disk commands.
3. Select the disk that you want to use. Enter select disk#. Replace # with the appropriate number that represents a certain disk.
4. Enter list partition.
5. Locate the partition that you want to delete and enter select partition #. Replace # with the appropriate number that represents the partition.
6. Lastly, enter delete partition.
7. After that, try to install Windows 10 again.

• READ ALSO:How to convert MBR to GPT disk without data loss

Solution 6 – Wait until Press any key to boot from disk message appears again

Many motherboards support both UEFI and Legacy boot, and some motherboards will start UEFI boot first. If you see Press any key to boot from disk message, do not press anything.

If your motherboard has UEFI and Legacy boot enabled the same message will appear again. When Press any key to boot from disk message appears for the second time press any key to boot from a designated device.

Solution 7 – Use a USB 2.0 flash drive

Users reported that USB 3.0 flash drives don’t give them the option to choose MBR or Legacy boot while choosing a boot device, but you can fix this problem by using a USB 2.0 flash drive instead.

Fourth case – The computer hardware may not support booting

Solution 1 – Delete all partitions and convert your hard drive to GPT

To fix this error you might have to delete all your partitions. This procedure will delete all your files, therefore we urge you to create a backup before you start.

If your hard drive is larger than 2TB, you must convert it to GPT. To do that, use diskpart tool to clean your hard drive and then convert it to GPT.

For more instructions on how to do that be sure to check some of the previous solutions.

Solution 2 – Format your hard drive from Linux

If you don’t want to use command line to fix this problem, you can start your PC from a Live Linux CD. After Linux starts, locate the appropriate disk management tool and format it to FAT32 drive.

Be sure to use slow method to completely clean your hard drive. This procedure will delete all files from your hard drive, so be sure to back them up.

After your hard drive is formatted, try to install Windows 10 again.

Solution 3 – Disable unnecessary boot devices in BIOS

If you have multiple hard drives, USB flash drives or DVD drives on your PC, you might want to disable them from BIOS. All these drives can interfere with Windows 10 installation, so be sure to disable them from BIOS and try to install Windows 10 again.

For more information on how to disable boot devices be sure to check your motherboard manual.

Solution 4 – Connect your hard drive to Intel SATA 3 port instead of Marvell port

These types of problems can sometimes appear if your hard drive is not connected to Intel SATA 3 port, so be sure to connect it to Intel SATA 3 port on your PC.

In addition, set Intel SATA 3 controller to AHCI mode and turn on the SMART option. You can turn on both these options from BIOS.

Solution 5 – Connect your hard drive and optical drive to correct SATA ports

Some motherboards require that you connect your hard drive and optical drive to appropriate ports. Users reported that after connecting hard drive and optical drive to SATA 5 and SATA 6 ports on their motherboard the issue was resolved.

For more information on which SATA ports you should use, we strongly suggest to check your motherboard manual.

Solution 6 – Remove your USB installation media after first restart

Few users reported that you can avoid this issue simply by removing your USB installation media. According to users, you need to remove your installation media before your computer restarts during the setup process.

After the USB media is removed, the installation should continue without any issues. In addition, be sure that you don’t have any additional USB drives or devices attached to your PC.

We don’t know if this solution works, but couple of users reported that it fixed the issue for them, so feel free to give it a try.

Solution 7 – Check if your hard drive is on the list of boot devices

You won’t be able to install Windows 10 unless your hard drive is listed on the Boot list. If you changed the boot order it might be possible that you accidentally removed your hard drive from boot list thus causing this issue.

You can fix this problem simply by entering BIOS and checking if your hard drive is available on the boot list.

Few users reported that their hard drive had an exclamation mark before it in Boot options menu, meaning that the hard drive is disabled.

According to them, you can enable your hard drive again simply by using Ctrl + 1 shortcut. Keep in mind that different versions of BIOS might use different shortcuts, so check your motherboard manual for detailed explanation.

Solution 8 – Disable External Device Boot

Few users reported that you can fix this issue on Sony Vaio devices by disabling External Device Boot. According to them, the device finds more than one boot option from BIOS, but you can fix that by following these steps:

1. Open BIOS settings. You should be able to do that by pressing the Assist button on your laptop.
2. Go to External Device Boot settings and disable this option.
3. Save changes and try to install Windows 10 again.

Solution 9 – Disable Intel Boot Security

If your device supports Intel Boot Security feature you should disable it from BIOS. Users reported that Intel Boot Security feature can interfere with Windows 10 installation, therefore be sure to disable this option in BIOS.

After disabling Boot Security Windows 10 should be installed without problems.

Solution 10 – Disable the AHCI mode

Using AHCI mode usually offers better performance, but sometimes it can prevent Windows 10 from installing properly.

Few users reported that you can fix this problem by disabling AHCI mode in BIOS so feel free to try that.

Solution 11 – Unplug your Ethernet cable

Many users reported that they fixed this issue simply by unplugging the Ethernet cable. We don’t know why Ethernet cable caused this problem, but if you’re getting The computer hardware may not support booting error be sure to try this solution.

Solution 12 – Set the boot order properly

Few users reported this error while selecting their USB drive as the boot device. According to them, the only way to fix this issue was to enter BIOS and set the USB flash drive as the first boot device.

For some strange reason the quick boot menu option wouldn’t work for them, but after changing the boot order in BIOS the issue was resolved.

Solution 13 – Set the partition to active

This error can sometimes occur if your installation partition isn’t set to active. To fix this problem you need to use diskpart tool and set your partition as active.

Keep in mind that using diskpart tool can lead to file loss, therefore we recommend that you back up your important files.

1. Start Command Prompt. If you’re trying to install Windows 10 you can start Command Prompt by pressing Shift + F10.
2. After Command Prompt opens, enter diskpart and press Enter.
3. If you have two or more hard drives, enter list disk command. Locate your the hard drive that you want to use to install Windows 10.
4. Enter select disk #. Replace the # with the appropriate number. If you have only one hard drive use disk 0.
5. Now enter list partition.
6. Locate your desired partition and enter select partition #. Replace the # with the appropriate number.
7. Enter active.
8. Close Command Prompt and try to install Windows 10 again.

Fifth case – Windows 10 can’t install on SSD

Solution 1 – Be sure that your SSD is clean

According to users, installation problems with Windows 10 can occur if your SSD drive isn’t clean. To fix this problem be sure to remove all partitions and files from your SSD and try to install Windows 10 again.

In addition, be sure that AHCI is enabled.

Solution 2 – Try non-UEFI boot

Few users reported that you can fix this problem simply by using non-UEFI boot. There are also reports that you can fix this problem by disabling UEFI boot.

We already covered how to disable UEFI in one of our previous solutions, so be sure to check it out.

Solution 3 – Disconnect other SSD

If you have two or more SSDs in your PC you might experience this error. One of the simplest solutions is to disconnect all other SSD drives and check if that fixes the problem.

In addition, be sure to disconnect any storage devices from your PC.

Solution 4 – Use SATA 2 port

Users reported that this issue can occur if the SATA 3 expansion board is faulty, so you might want to try using SATA 2 port instead.

According to users, that they were able to install Windows 10 after connecting their SSD to SATA 2 port, so be sure to try that.

Solution 5 – Connect your DVD drive to motherboard

It seems that this issue appears when you connect both your SSD and DVD to the controller. One of the simplest solutions is to disconnect your DVD drive and connect it to the motherboard while keeping the SSD connected to controller.

After doing tha,t Windows 10 should install without any issues.

Solution 6 – Remove RAID configuration

Users reported this problem while using RAID, and according to them, removing RAID configuration from BIOS fixed this issue. After removing RAID, create it again, make it bootable and you should be able to install Windows 10.

Solution 7 – Make sure that your USB flash drive and SSD don’t match

This is a very unlikely issue, but users reported that Windows 10 installation can fail if you’re trying to install it with USB flash drive.

Users reported that they had problems with Corsair USB flash drive and SSD, but after replacing the Corsair flash drive with a different brand the issue was fixed.

Sixth case – The partition contains one or more dynamic volumes

Solution – Convert the your dynamic disk to basic disk

One way to fix this error is to use diskpart tool. Using this tool all your files and partitions from the selected disk will be deleted, therefore we urge you to back up important files before you start.

To create basic disk, start Command Prompt and enter diskpart. After diskpart starts, follow these steps:

1. Enter list disk. Locate the disk that you want to convert.
2. Enter select disk #. Replace # with the appropriate number.
3. Enter clear.
4. Now enter convert basic.
5. Close Command Prompt and try to install Windows 10 again.

According to users, you can use third-party tools such as Partition Wizard to convert dynamic disk to basic without losing any of your files.

Start Partition Wizard from Windows or boot Partition Wizard from a USB flash drive, right click your Disk and choose Convert Dynamic Disk To Basic Disk.

Click Apply button and restart your PC if you’re asked to. Even though using Partition Wizard shouldn’t remove your files, we strongly suggest to back them up just in case.

After your disk is converted to basic, try to install Windows 10 again.

Windows cannot be installed to this disk error can be a big problem and prevent you from installing Windows 10, but you should be able to fix this issue by using one of our solutions.

If you found another way to solve this error or you have any other question, feel free to share in the comments section below.

Вам также может понравиться

Windows или Linux: Что лучше выбрать?

Есть много причин выбирать между Windows и Linux, но

Файл владелец изменить linux

Команда Chown в Linux Chown Command in Linux (File

Установка шлюза по умолчанию linux

Настройка сети вручную Содержание Краткое описание

Чем разбить диск для linux

ИТ База знаний Курс по Asterisk Полезно — Узнать IP —