The driver has been blocked from loading [Quick Fix]

• Many users encountered The driver has been blocked from loading error message while trying to install a new application.
• Sometimes if the antivirus is blocking the new application, the same problem can occur.
• Take a look at our Drivers Hub for complete guides from trustworthy tech experts.
• For accurate solutions to similar problems, you may also visit our Fix section.

1. Download DriverFix now for free (secured download)
2. Launch the program and press the Scan icon
3. Wait for the scan to finish and start installing the needed drivers

• DriverFix has been successfuly downloaded by 0 readers this month.

The driver has been blocked from loading is an error message prompted by the Windows system when you try to install or run a program that powers your device that’s not compatible with the system.

However, the same problem can be experienced when an antivirus is blocking the software in discussion or when you don’t have administrator rights.

In order to help you address this, we prepared a list of 3 quick solutions. If you’re having a hard time resolving the issue at hand, make sure to check them out below.

How do I fix The driver has been blocked from loading error?

1. Disable antivirus protection or add an exception

If you are using the built-in protective software Windows Defender or any other third party antivirus tool you can receive The driver has been blocked from loading error message when trying to install new apps.

Choose to disable the antivirus protection and retry the installation process. If everything works without problems you should try to add an exception within the antivirus software for that particular program.

Always turn back on the security protection on your Windows 10 system for keeping everything safe and secured all the time.

We recommend Vipre Antivirus Plus – a reliable antivirus program that protects your PC against viruses, Trojans, malware, spyware, and other Internet dangers such as ransomware.

This tool offers the best protection on the market, and it won’t interfere with your new apps in any way.

Vipre Antivirus Plus

2. Disable driver signature enforcement

1. Press the Windows key + R, type cmd, and hit Enter.
2. Right-click on Command Prompt, and select Run as administrator.
3. Type the following command, and press Enter:bcdedit.exe /set nointegritychecks on
4. This will automatically disable driver signature enforcement on your device.
5. If you want to enable this feature back again, you need to execute the following command in an elevated cmd window: bcdedit.exe /set nointegritychecks off

Additionally, you should also follow:

1. Type Control Panel in the Cortana search box, and hit Enter.
2. Go to Advanced system settings.
3. Under Perfromance, click on Settings.
4. Navigate to Data Execution Prevention.
5. Make sure the Turn on DEP for essential Windows programs and services only option is checked.
6. Press the Windows key + R, and type gpedit.msc.
7. Go to: Computer configuration/Windows Settings/Local policies/Security options
8. Check Unsigned driver installation behavior.

As a security protection measure Windows requires digitally signed drivers. This is a helpful feature that can protect your Windows 10 device, but in some situations it can turn out to be a real source for problems.

3. Run your programs with administrator rights

If you are running a program without administrator rights you might experience The driver has been blocked from loading issue.

So, before trying to install a new app or process make sure that you are completing the actual installation process with administrator rights.

We also have a dedicated guide on how to make yourself an administrator, so be sure to check it out.

If the troubleshooting methods listed above didn’t work for you, you may be facing an incompatibility problem. Make sure you are flashing the right software for your particular Windows 10 platform.

If you have any other suggestions or questions, feel free to leave them in the comments section below.

Drivers have been blocked from loading due to incompatibility with this system

I know this is ia incompatibility issue but I am still confusing why this error just persents in my Windows 7 x64 edtion. I installed a specific program which will load third-party driver in order to launch the program, but everytime I try to do it, I get below error:

Log Name: System
Source: Application Popup
Date: 2010/4/24 18:00:06
Event ID: 1060
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: chill-PC
Description:
\??\D:\GAMES\YHZT\bin32\GameGuard\dump_wmimmc.sys has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.
Event Xml:

1060
2
0
0x80000000000000

3492
System
chill-PC

\??\D:\GAMES\YHZT\bin32\GameGuard\dump_wmimmc.sys
000000000200300000000000240400C0000000006B0300C000000000000000000000000000000000

OK, I tried install a Windows 7 x86 edtion and everything working like a dream, but when I do the same thing I still get stuck at that error. So from this point, the Windows 7 x86 didn’t encounter incompatibility issue so I have few questions:

1. How can I disable the incompatibility checking for this driver in WIN 7 x64?

2. If we cannot achieve this point, if any workaround can temproary fix this?

I tried everything to fix this issue and consumed my many days, any idea will be great appreciated!

a245ac8356cd89088a3a0e0536223c20 56cd89088a3a0e05 c093d70f088499c3a837cae00c042f14

Windows is blocking drivers from loading

This forum is closed. Thank you for your contributions.

Asked by:

Question

I have a very unique windows XP Pro configuration. The system is a mobile law enforcement computer. It appears that a windows serial ball point mouse is loading when the serial to com port GPS receives a certain character. This driver loading is causing the mouse to jump all over the screen and randomly left and right click items. We can remove the driver and all goes back to normal until the GPS (usb to serial) receives the triggering character again. Is there a way to block this driver from loading without any user interaction? Or maybe, is there a way to tell windows this driver is loaded but don’t use it in any way?

The system is a motorola MW800
The GPS is a Lassen SK II by Trimble built into a m/a com m803 dash mount mobile radio.

Also the Radio connect via an Edgeport serial to USB Hub.

All replies

I have a very unique windows XP Pro configuration. The system is a mobile law enforcement computer. It appears that a windows serial ball point mouse is loading when the serial to com port GPS receives a certain character. This driver loading is causing the mouse to jump all over the screen and randomly left and right click items. We can remove the driver and all goes back to normal until the GPS (usb to serial) receives the triggering character again. Is there a way to block this driver from loading without any user interaction? Or maybe, is there a way to tell windows this driver is loaded but don’t use it in any way?

The system is a motorola MW800
The GPS is a Lassen SK II by Trimble built into a m/a com m803 dash mount mobile radio.

Also the Radio connect via an Edgeport serial to USB Hub.

Windows is blocking drivers from loading

Вопрос

I have a very unique windows XP Pro configuration. The system is a mobile law enforcement computer. It appears that a windows serial ball point mouse is loading when the serial to com port GPS receives a certain character. This driver loading is causing the mouse to jump all over the screen and randomly left and right click items. We can remove the driver and all goes back to normal until the GPS (usb to serial) receives the triggering character again. Is there a way to block this driver from loading without any user interaction? Or maybe, is there a way to tell windows this driver is loaded but don’t use it in any way?

The system is a motorola MW800
The GPS is a Lassen SK II by Trimble built into a m/a com m803 dash mount mobile radio.

Also the Radio connect via an Edgeport serial to USB Hub.

Все ответы

I have a very unique windows XP Pro configuration. The system is a mobile law enforcement computer. It appears that a windows serial ball point mouse is loading when the serial to com port GPS receives a certain character. This driver loading is causing the mouse to jump all over the screen and randomly left and right click items. We can remove the driver and all goes back to normal until the GPS (usb to serial) receives the triggering character again. Is there a way to block this driver from loading without any user interaction? Or maybe, is there a way to tell windows this driver is loaded but don’t use it in any way?

The system is a motorola MW800
The GPS is a Lassen SK II by Trimble built into a m/a com m803 dash mount mobile radio.

Also the Radio connect via an Edgeport serial to USB Hub.

Fixing The driver has been blocked from loading issue

When trying to install or run a program or software that isn’t compatible with the system powering your device, you may get the error message “The driver has been blocked from loading.”

One of the reasons for this error is an incompatibility issue. The other reason for getting “the driver has been blocked from loading” error message is an antivirus blocking the software you are trying to install. Lastly, the problem can be experienced when you are trying to install software from an account without administrator rights.

That incompatibility situation and other issues are what we are going to discuss in this tutorial.

Read through to find a list of troubleshooting solutions that may be of help in solving the “The driver has been blocked from loading” problem.

Solutions: The Driver has Been Blocked from Loading

1. Fix 1 – Deactivate digital driver signature authorization
2. Fix 2 – Either add an exception or disable antivirus protection
3. Fix 3 – Use account with administrative right to run your programs

Fix 1: Deactivate Digital Driver Signature Authorization

Having digitally signed drivers is a Windows security protection measure. The feature is most helpful, and when fully functioning, it protects your Windows 10 device. However, there are instances when it turns out to be the actual source of problems, including “the driver has been blocked from loading” issue.

To try and fix this error, disable driver signature enforcement:

• Run an elevated command prompt window on your system – right-click the Windows Start icon, then choose “Command Prompt (Admin)”.
• In the cmd window that opens up, type “bcdedit.exe /set nointegritychecks on” and press the Enter key.
• Driver signature enforcement on your PC has been automatically disabled.
• Should you want to undo this action and enable driver signature enforcement, execute the following command in an elevated cmd window: “bcdedit.exe /set nointegritychecks off”.

Also, you should do the following:

1. Right-click on This PC (or My Computer) and click the option “Advanced system settings” from the window that opens from the left panel.
2. Under “System Properties”, move to the “Advanced” tab and locate “Performance”, then click on “Settings”.

Under “Performance Options”, move to “Data Execution Prevention” and ensure that the “Turn on DEP for essential Windows programs and services only” option is ticked.

1. If and when the option is checked, press Win+R and type gpedit.msc.
2. Then, navigate to Computer Configuration – > Windows Settings – > Local Policies – > Security options – > check unsigned driver installation behavior.

Fix 2: Either Add an Exception or Disable Antivirus Protection

If your issue is not because of the problems fixable by solution 1, you’re still asking, ‘Why do I get “The driver has been blocked from loading notification?”’ This might be because of the security settings in your PC. If your system is operating with the default Windows security software or any third-party antivirus program, you can experience blocked installations.

To start with, disable the antivirus protection in use, restart your system and retry installing the app or tool

that has been previously blocked. If this step works smoothly, try adding an exception within the antivirus software for this particular app or tool.

After a successful installation, turn back on security protection. At all times, security protection on your Windows 10 system must be turned on to keep the PC safe.

If you’re looking for an effective way of protecting your Windows 10 system against antiviruses, we recommend downloading the Auslogics Driver Updater tool. It’s a multi-problem solver for hardware or devices that are outdated missing or defective. The tool is Microsoft® Silver Application Developer certified. It’s compatible with Windows XP, Vista, 7, 8.1, and 10. The tool is ideal if you’re looking to save time as it can update all drivers in one click instead of manually searching for the right updates individually. With the Auslogics Driver Updater tool, you get safe backups automatically created before drivers are updated.

Resolve PC Issues with Driver Updater

Unstable PC performance is often caused by outdated or corrupt drivers. Auslogics Driver Updater diagnoses driver issues and lets you update old drivers all at once or one at a time to get your PC running smoother

Fix 3: Use Account with Administrative Right to Run Your Programs

If you’re still searching for how to fix the Driver has been blocked from loading problem, it might be because you’re running a program without administrator rights.

The solution is simple. Before trying to install or run any new programs, ensure that you are using an account in your PC that has administrator properties.

If you’re not logged in with an account with administrative rights, you will be able to do everything just as you normally would when using the admin account. But when it comes to completing the installation of a new app or process, you will not be able to do that.