Start your PC in safe mode in Windows 10

Safe mode starts Windows in a basic state, using a limited set of files and drivers. If a problem doesn’t happen in safe mode, this means that default settings and basic device drivers aren’t causing the issue. Observing Windows in safe mode enables you to narrow down the source of a problem, and can help you troubleshoot problems on your PC.

There are two versions of safe mode: Safe Mode and Safe Mode with Networking. Safe Mode with Networking adds the network drivers and services you’ll need to access the Internet and other computers on your network.

Select from the following sections to find out how to start your PC in safe mode from Settings, from the sign-in screen, or from a black or blank screen.

Press Windows logo key + I on your keyboard to open Settings. If that doesn’t work, select the Start button, then select Settings .

Under Advanced startup, select Restart now.

After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.

After your PC restarts, you’ll see a list of options. Select 4 or press F4 to start your PC in Safe Mode. Or if you’ll need to use the Internet, select 5 or press F5 for Safe Mode with Networking.

When you can’t open Settings to get into safe mode, restart your device from the Windows sign-in screen.

On the Windows sign-in screen, press and hold the Shift key while you select the Power > Restart .

After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.

After your PC restarts, you’ll see a list of options. Select 4 or F4 to start your PC in safe mode. Or if you’ll need to use the Internet, select 5 or F5 for Safe Mode with Networking.

Note: If you’ve encrypted your device, you’ll need your BitLocker key to start in safe mode.

Before you enter safe mode, you need to enter the Windows Recovery Environment (winRE). To do this, you will repeatedly turn your device off, then on:

Hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

On the first sign that Windows has started (for example, some devices show the manufacturer’s logo when restarting) hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

When Windows restarts, hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

Allow your device to fully restart. You will enter winRE.

Now that you are in winRE, you will follow these steps to take you to safe mode:

On the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.

After your device restarts, you’ll see a list of options. Select option 5 from the list or press F5 for Safe Mode with Networking.

If you need more info on a black or blank screen error, see Troubleshoot black or blank screen errors.

Notes: If you need to exit safe mode, simply restart your device, or:

Press the Windows logo key + R.

Type msconfig in the Open box and then select OK.

Select the Boot tab.

Under Boot options, clear the Safe boot checkbox.

Не загружается windows 10 — startup.nsh

Такая вот проблема.
Установка Windows 10 на новый ноутбук MSI.

Вставил флешку, выбрал приоритет загрузки с usb флешки.
Все ок, загрузка пошла. Далее система показала какие то 6 дисков.
Один диск был разбит на несколько мелких частей. На ту часть диска, которая была вся свободна (450 гб)
Показалась ошибка (возможно это важно?!) — «преобразуйте диск в MBR».
И пошла установка. Все вроде ок, windows встал и запускается.

Но только при включении всегда следующее:
press ESC in 1 second to skip startup.nsh, any other key to continue.
Shell>_
Вложение:

И приходится вводит exit, нажимать enter и только после этого, происходит нормальная загрузка Windows 10.

Внес изменения в файл startup.nsh — из всех вариантов помогло добавить фразу — bootx64.efi
Результат есть, сообщение все равно показывается, и идет отчет 5,4,3,2,1 и потом автоматически загружается.
Не много раздражает и хочется, чтобы все работало как должно.

Кто сталкивался, может сможете подсказать, что делать?
Любые идеи принимаются.

п.с. после установки windows появились вот такие диски.

Press esc in 1 seconds to skip startup.nsh
press esc in 1 seconds to skip startup.nsh не работает клавиатура и мышь. Помогитееее, Люди.

Press ESC in 2 Seconds to skip startup.nsh,any other key to continue
Пытался переустановить виндовс,после переустановки стала выбивать данная ошибка, что делать?

Windows XP — StartUP Problem
Извините что пишу англискими буквами, у меня нет Русски кеыбоард. Постараюс обяснит мою проблему.

Windows Installer Startup
Доброго времени суток! Каждый раз при загрузке windows появляется установщик windows с надписью.

Решение

поосторожнее — этим Вы удалите диск восстановления системы от разработчика, но если он Вам не нужен (и что-то мне подсказывает, что в том образе восстановления полно утилит от MSI, которые показыват мультики — о том, какой хороший ноутбук, то есть — мусор) то лучше всего сделать так, как советует kumehtar.
Мой вариант:
1. Скачайте все драйверы для Вашего ноутбука с сайта производителя.
2. Разберитесь с UEFI BIOS ноутбука — включите там только режим UEFI.
3. Из смонтированного образа с 10-кой скопируйте всё, что там есть на заранее отформатированную флешку в FAT32 — всё это можно сделать самой виндой, без всяких там «супер»-утилит.
4. Загрузитесь с этой флешки.
5. Если всё-таки решились очистить весь диск и по-нормальному его разбить на разделы, в окне создания разделов: Жмeте нa клaвиaтype Shift + F10. B кoмaнднoй cтpoкe ввoдите кoмaнды (после каждой команды нажимать Enter на клаве):
Koнвepтиpoвaть в GPT:

diskpart
list dlsk (ecли диcк нe oдин)
sel disk 0 (выбор диска)
clean
convert gpt
exit (выxoд из diskpart)
exit (выxoд из cmd)

Внизу жмете кнопочку «Обновить».
6. Создаете разделы, которые Вам хочется и устанавливаете на тот, который создали под диск С:\, винду.
Если это не поможет, отключите в UEFI BIOS ноутбука Secure Boot (после установки винды, его можно обратно включить, если захочется).

How to disable Windows 10 fast startup (and why you’d want to)

Fast startup is a feature first implemented in Windows 8 and carried over to Windows 10 that provides a faster boot time when starting up your PC. It’s a handy feature and one that most people use without even knowing, but there are others who disable it immediately when they get their hands on a new PC.

Let’s take a look at exactly how fast startup works, why you might want to enable or disable it, and how to do so.

What is fast startup?

Windows PCs typically operate in a number of Advanced Configuration and Power Interface (ACPI) power states. An S0 power state, for example, is when your PC is running and ready to respond to your input. There are a number of sleep states, including S1, S2, and S3, and there’s also a hybrid sleep state where hibernation is used in tandem with a sleep state.

Hibernation is considered an S4 power state. While hibernating, your PC will seem like it’s completely off, but there will be a saved hibernation file ready to be used to boot back to where you were during your last user session. Some power is usually still routed to peripherals so that you can, say, tap your keyboard and have the PC boot.

An S5 power state (soft off) is when your PC is shut down and rebooted completely. There’s no hibernation file and no saved user session. There is also a G3 power state, which is when your PC consumes absolutely no power and is completely turned off.

With fast startup enabled, choosing to shut down your PC might look like you’re completely shutting things down, but in reality, your PC is entering a mix between a shutdown and hibernation. A hibernation file is indeed used, although it is smaller than usual. Why? You’re logged off before the file is created, meaning your session is not recorded. The speed boost comes from the Windows kernel being saved on your hard drive and loaded when booting.

Is your PC truly shutting down?

While fast startup is a pretty harmless tool that can deliver a considerable startup speed boost, especially to PCs using hard-disk drives (HDD), some people prefer to have their PC truly shut down when they click the «Shut down» button on their PC.

In a post on the PC Master Race subreddit, a user pointed out that fast startup was re-enabled in a Windows 10 update following the release of the Fall Creators Update. Following the April 2018 Windows 10 update, Fast Startup was again re-enabled on my own PC, and it seems to have kicked in again following the May 2019 Update.

If you’re among the group of people who disable fast startup on their Windows 10 PC, you might want to recheck the settings to see if it’s still off.

Why disable fast startup?

Leaving fast startup enabled shouldn’t harm anything on your PC — it’s a feature built into Windows — but there are a few reasons why you might want to nevertheless disable it.

One of the major reasons is if you’re using Wake-on-LAN, which will likely have problems when your PC is shut down with fast startup enabled. Others would like to save the hard drive space that is usually taken up with the hibernation file, and Linux users will likely see complications with dual boot and virtualization. Furthermore, some users have even reported that power buttons on their keyboard will not work and fans in their PCs will continue spinning. These problems are by no means across the board, but they can prove to be frustrating. Finally, Windows 10 updates might not install properly if you have fast startup enabled.

Your reason for disabling fast startup might simply have to do with wanting to see your PC truly shut down when you choose to shut down, especially when working with a speedy solid-state drive (SSD), or to have the processor (CPU) uptime reset after booting.

How to enable and disable fast startup on Windows 10

If you’d like to see how your PC performs without fast startup enabled, you can disable it in just a few steps:

Right-click the Start button.

Click Search.

Click Power Options.

Click Change settings that are currently unavailable.

Click Save changes.

If you want to re-enable fast startup at any point, simply repeat the steps so a checkmark appears next to Turn on fast startup.

More Windows 10 resources

For more helpful articles, coverage, and answers to common questions about Windows 10, visit the following resources:

Affordable accessories that’ll pair perfectly with your PC

Every one of these awesome PC accessories will enhance your everyday experience — and none cost more than $30.

KLIM Aim RGB gaming mouse ($30 at Amazon)

Whether you’re a gamer or not, this is an absurdly good mouse for the price. It’s ambidextrous, has a responsive sensor, a braided cable, tank-like build quality, and, yes, it has RGB lighting, though you can turn it off if that’s not your thing.

AmazonBasics USB speakers ($16 at Amazon)

These neat little speakers may only pack 2.4W of total power, but don’t let that fool you. For something so small you get a well-rounded sound and a stylish design. And they only cost $16.

Razer mouse bungee ($20 at Amazon)

Use a wired mouse? You need a mouse bungee to keep your cable tidy and free of snags. You get no drag on the cable, and this one has subtle styling, a rust-resistant spring and a weighted base, all for $20.

We may earn a commission for purchases using our links. Learn more.

Halo: MCC’s live service elements make it better, not worse

Halo: The Master Chief Collection is more popular than ever, but some fans don’t agree with the live service approach 343 Industries has taken with it. Here’s why those elements are, at the end of the day, great for the game and for Halo overall.

Microsoft’s Surface Duo is not ‘failing up’

Microsoft announced this week that it was expanding Surface Duo availability to nine new commercial markets. While Surface Duo is undoubtedly a work in progress, this is not a sign of a disaster. It’s also doesn’t mean that Surface Duo is selling a ton either. Instead, the reason for the expansion is a lot more straightforward.

Here’s what you can do if Windows 10 update KB5001330 is causing issues

In this guide, we’ll show you the steps to get rid of the update KB5001330 to fix profile, gaming, and BSoD problems with the Windows 10 October 2020 Update and May 2020 Update.

These are the best PC sticks when you’re on the move

Instant computer — just add a screen. That’s the general idea behind the ultra-portable PC, but it can be hard to know which one you want. Relax, we have you covered!