Windows running linux applications

Run Linux GUI apps on the Windows Subsystem for Linux (preview)

You can now preview Windows Subsystem for Linux (WSL) support for running Linux GUI applications (X11 and Wayland) on Windows in a fully integrated desktop experience.

WSL 2 enables Linux GUI applications to feel native and natural to use on Windows.

• Launch Linux apps from the Windows Start menu
• Pin Linux apps to the Windows task bar
• Use alt-tab to switch between Linux and Windows apps
• Cut + Paste across Windows and Linux apps

You can now integrate both Windows and Linux applications into your workflow for a seamless desktop experience.

Install support for Linux GUI apps

Prerequisites

You will need to be on Windows 11 Build 22000 or higher to access this feature. You can join the Windows Insiders Program to get the latest preview builds.

Installed driver for vGPU

To run Linux GUI apps, you should first install the preview driver matching your system below. This will enable you to use a virtual GPU (vGPU) so you can benefit from hardware accelerated OpenGL rendering.

Fresh install — No prior WSL installation

If you have not already done so, install WSL and set up a user name and password for your Linux distribution.

Open a command prompt with administrator privileges.

Select Start, type PowerShell, right-click Windows PowerShell, and then select Run as administrator.

Run this command and reboot your machine when prompted:

Once your machine has finished rebooting, installation will continue and you will be asked to enter a username and password. This will be your Linux credential for the Ubuntu distribution.

You’re now ready to begin using Linux GUI apps on WSL!

Existing WSL install

If you already have WSL installed on your machine, you can update to the latest version that includes Linux GUI support by running the update command from an elevated command prompt.

Select Start, type PowerShell, right-click Windows PowerShell, and then select Run as administrator.

Enter the WSL update command:

You will need to restart WSL for the update to take effect. You can restart WSL by running the shutdown command in PowerShell.

Linux GUI apps are only supported with WSL 2 and will not work with a Linux distribution configured for WSL 1. Read about how to change your distribution from WSL 1 to WSL 2.

Run Linux GUI apps

You can run the following commands from your Linux terminal to download and install these popular Linux applications. If you are using a different distribution than Ubuntu, it may use a different package manager than apt. Once the Linux application is installed, you can find it in your Start menu under the distribution name. For example: Ubuntu -> Microsoft Edge .

Update the packages in your distribution

Install Gedit

Gedit is the default text editor of the GNOME desktop environment.

To launch your bashrc file in the editor, enter: gedit

Install GIMP

GIMP is a free and open-source raster graphics editor used for image manipulation and image editing, free-form drawing, transcoding between different image file formats, and more specialized tasks.

To launch, enter: gimp

Install Nautilus

Nautilus, also known as GNOME Files, is the file manager for the GNOME desktop. (Similiar to Windows File Explorer).

To launch, enter: nautilus

Install VLC

VLC is a free and open source cross-platform multimedia player and framework that plays most multimedia files.

To launch, enter: vlc

Install X11 apps

X11 is the Linux windowing system and this is a miscellaneous collection of apps and tools that ship with it, such as the xclock, xcalc calculator, xclipboard for cut and paste, xev for event testing, etc. See the x.org docs for more info.

To launch, enter the name of the tool you would like to use. For example:

Install Google Chrome for Linux

To install the Google Chrome for Linux:

1. Change directories into the temp folder: cd /tmp
2. Use wget to download it: sudo wget https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
3. Get the current stable version: sudo dpkg -i google-chrome-stable_current_amd64.deb
4. Fix the package: sudo apt install —fix-broken -y
5. Configure the package: sudo dpkg -i google-chrome-stable_current_amd64.deb

To launch, enter: google-chrome

Install Microsoft Teams for Linux

To install Microsoft Teams for Linux:

1. Change directories into the temp folder: cd /tmp
2. Use curl to download the package: sudo curl -L -o «./teams.deb» «https://teams.microsoft.com/downloads/desktopurl?env=production&plat=linux&arch=x64&download=true&linuxArchiveType=deb»
3. Use apt to install it: sudo apt install ./teams.deb -y

To launch, enter: teams

Install Microsoft Edge browser for Linux

Find information on how to install the Microsoft Edge browser for Linux using the command line on the Edge Insider site. Select Get instructions under the Command line installation section of the page.

Источник

What is the Windows Subsystem for Linux?

The Windows Subsystem for Linux lets developers run a GNU/Linux environment — including most command-line tools, utilities, and applications — directly on Windows, unmodified, without the overhead of a traditional virtual machine or dualboot setup.

• Choose your favorite GNU/Linux distributions from the Microsoft Store.
• Run common command-line tools such as grep , sed , awk , or other ELF-64 binaries.
• Run Bash shell scripts and GNU/Linux command-line applications including:
  • Tools: vim, emacs, tmux
  • Languages: NodeJS, Javascript, Python, Ruby, C/C++, C# & F#, Rust, Go, etc.
  • Services: SSHD, MySQL, Apache, lighttpd, MongoDB, PostgreSQL.
• Install additional software using your own GNU/Linux distribution package manager.
• Invoke Windows applications using a Unix-like command-line shell.
• Invoke GNU/Linux applications on Windows.

What is WSL 2?

WSL 2 is a new version of the Windows Subsystem for Linux architecture that powers the Windows Subsystem for Linux to run ELF64 Linux binaries on Windows. Its primary goals are to increase file system performance, as well as adding full system call compatibility.

This new architecture changes how these Linux binaries interact with Windows and your computer’s hardware, but still provides the same user experience as in WSL 1 (the current widely available version).

Individual Linux distributions can be run with either the WSL 1 or WSL 2 architecture. Each distribution can be upgraded or downgraded at any time and you can run WSL 1 and WSL 2 distributions side by side. WSL 2 uses an entirely new architecture that benefits from running a real Linux kernel.

Источник

Working across Windows and Linux file systems

There are a number of considerations to keep in mind when working between Windows and Linux file systems. We have outlined a few of them for you in this guide, including some examples of interoperability support for mixing Windows and Linux-based commands.

File storage and performance across file systems

We recommend against working across operating systems with your files, unless you have a specific reason for doing so. For the fastest performance speed, store your files in the WSL file system if you are working in a Linux command line (Ubuntu, OpenSUSE, etc). If you’re working in a Windows command line (PowerShell, Command Prompt), store your files in the Windows file system.

For example, when storing your WSL project files:

• Use the Linux file system root directory: \\wsl$\Ubuntu-18.04\home\ \Project
• Not the Windows file system root directory: /mnt/c/Users/ /Project$ or C:\Users\ \Project

When you see /mnt/ in the file path of a WSL command line, it means that you are working from a mounted drive. So the Windows file system C:/ drive ( C:\Users\ \Project ) will look like this when mounted in a WSL command line: /mnt/c/Users/ /Project$ . It is possible to store your project files on a mounted drive, but your performance speed will improve if you store them directly on the \\wsl$ drive.

View your current directory in Windows File Explorer

You can view the directory where your files are stored by opening the Windows File Explorer from the command line, using:

Alternatively, you can also use the command: powershell.exe /c start . Be sure to add the period at the end of the command to open the current directory.

To view all of your available Linux distributions and their root file systems in Windows File explorer, in the address bar enter: \\wsl$

Filename and directory case sensitivity

Case sensitivity determines whether uppercase (FOO.txt) and lowercase (foo.txt) letters are handled as distinct (case-sensitive) or equivalent (case-insensitive) in a file name or directory. Windows and Linux file systems handle case sensitivity in different ways — Windows is case-insenstive and Linux is case-sensitive. Learn more about how to adjust case sensitivity, particularly when mounting disks with WSL, in the Adjust case sensitivity how-to article.

Interoperability between Windows and Linux commands

Windows and Linux tools and commands can be used interchangeably with WSL.

• Run Windows tools (ie. notepad.exe) from a Linux command line (ie. Ubuntu).
• Run Linux tools (ie. grep) from a Windows command line (ie. PowerShell).
• Share environment variables between Linux and Windows. (Build 17063+)

Run Linux tools from a Windows command line

Run Linux binaries from the Windows Command Prompt (CMD) or PowerShell using wsl (or wsl.exe ).

Binaries invoked in this way:

• Use the same working directory as the current CMD or PowerShell prompt.
• Run as the WSL default user.
• Have the same Windows administrative rights as the calling process and terminal.

The Linux command following wsl (or wsl.exe ) is handled like any command run in WSL. Things such as sudo, piping, and file redirection work.

Example using sudo to update your default Linux distribution:

Your default Linux distribution user name will be listed after running this command and you will be asked for your password. After entering your password correctly, your distribution will download updates.

Mixing Linux and Windows commands

Here are a few examples of mixing Linux and Windows commands using PowerShell.

To use the Linux command ls -la to list files and the PowerShell command findstr to filter the results for words containing «git», combine the commands:

To use the PowerShell command dir to list files and the Linux command grep to filter the results for words containing «git», combine the commands:

To use the Linux command ls -la to list files and the PowerShell command > out.txt to print that list to a text file named «out.txt», combine the commands:

The commands passed into wsl.exe are forwarded to the WSL process without modification. File paths must be specified in the WSL format.

To use the Linux command ls -la to list files in the /proc/cpuinfo Linux file system path, using PowerShell:

To use the Linux command ls -la to list files in the C:\Program Files Windows file system path, using PowerShell:

Run Windows tools from Linux

WSL can run Windows tools directly from the WSL command line using [tool-name].exe . For example, notepad.exe .

Applications run this way have the following properties:

• Retain the working directory as the WSL command prompt (for the most part — exceptions are explained below).
• Have the same permission rights as the WSL process.
• Run as the active Windows user.
• Appear in the Windows Task Manager as if directly executed from the CMD prompt.

Windows executables run in WSL are handled similarly to native Linux executables — piping, redirects, and even backgrounding work as expected.

To run the Windows tool ipconfig.exe , use the Linux tool grep to filter the «IPv4» results, and use the Linux tool cut to remove the column fields, from a Linux distribution (for example, Ubuntu) enter:

Let’s try an example mixing Windows and Linux commands. Open your Linux distribution (ie. Ubuntu) and create a text file: touch foo.txt . Now use the Linux command ls -la to list the direct files and their creation details, plus the Windows PowerShell tool findstr.exe to filter the results so only your foo.txt file shows in the results:

Windows tools must include the file extension, match the file case, and be executable. Non-executables including batch scripts. CMD native commands like dir can be run with cmd.exe /C command.

For example, list the contents of your Windows files system C:\ directory, by entering:

Or use the ping command to send an echo request to the microsoft.com website:

Parameters are passed to the Windows binary unmodified. As an example, the following command will open C:\temp\foo.txt in notepad.exe :

This will also work:

Share environment variables between Windows and WSL with WSLENV

WSL and Windows share a special environment variable, WSLENV , created to bridge Windows and Linux distributions running on WSL.

Properties of WSLENV variable:

• It is shared; it exists in both Windows and WSL environments.
• It is a list of environment variables to share between Windows and WSL.
• It can format environment variables to work well in Windows and WSL.
• It can assist in the flow between WSL and Win32.

Prior to 17063, only Windows environment variable that WSL could access was PATH (so you could launch Win32 executables from under WSL). Starting in 17063, WSLENV begins being supported. WSLENV is case sensitive.

WSLENV flags

There are four flags available in WSLENV to influence how the environment variable is translated.

• /p — translates the path between WSL/Linux style paths and Win32 paths.
• /l — indicates the environment variable is a list of paths.
• /u — indicates that this environment variable should only be included when running WSL from Win32.
• /w — indicates that this environment variable should only be included when running Win32 from WSL.

Flags can be combined as needed.

Read more about WSLENV, including FAQs and examples of setting the value of WSLENV to a concatenation of other pre-defined environment vars, each suffixed with a slash followed by flags to specify how the value should be translated and passing variables with a script. This article also includes an example for setting up a dev environment with the Go programming language, configured to share a GOPATH between WSL and Win32.

Disable interoperability

Users may disable the ability to run Windows tools for a single WSL session by running the following command as root:

To re-enable Windows binaries, exit all WSL sessions and re-run bash.exe or run the following command as root:

Disabling interop will not persist between WSL sessions — interop will be enabled again when a new session is launched.

Источник