Windows setup corrupt file
Требования.
Статья применима для Windows 2000/XP
Понадобится диск с дистрибутивом Windows.
Информация
Не запускается Windows, выходит ошибка Widows could not start because the following file is missing or corrupt: \windows\sistem\cp_1251.nls You can attempt to repair this file by starting windows Setup using the original Setup cd-rom. Select “r” at the first screen to start repair. Этот файл отвечает за поддержку кодировки Win-1251, т.е. русских букв. Для его восстановления необходимо переписать новую копию файла с дистрибутива Windows.
Копирование нового файла из дистрибутива Windows.
1. Загрузите компьютер с CD или DVD-диска;
2. При появлении сообщения вида «Press any key to boot from CD» нажмите любую клавишу для загрузки с CD/DVD диска. Например. Кнопку «Ввод (Enter)»;
3. Начните устанавливать Windows;
4. Когда появится сообщение «Вас приветствует программа установки«, и предложат выполнить одно из трех действий:
— Чтобы приступит к установке Windows, нажмите ( );
— Чтобы восстановить Windows, с помощью консоли восстановления, нажмите ;
— Чтобы выйти из программы, не устанавливая Windows, нажмите ;
Выполните второе действие, нажмите кнопку «R» для запуска консоли восстановления.
5. Дождитесь сообщения на экране «В какую копию Windows следует выполнить вход«.
6. После строки (Для отмены нажмите ), введите номер операционной системы Windows, которую будем восстанавливать, и нажмите кнопку Ввод (Enter);
 | На компьютере может находится две и более ОС Windows, будьте внимательны. Все экземпляры ОС Windows будут отображены на экране |
7. Вам будет предложено ввести пароль локального Администратора, введите его и нажмите кнопку Ввод (Enter);
8. Должна появится запись C:\WINDOWS> — это командная строка;
| Запись C:\WINDOWS> может отличаться в зависимости от установленной ОС Windows. Например. C:\WINNT или C:\WINDOWS1 |
9. В командной строке введите ren С:\windows\system32\C_1251.NLS C_1251.NLS.OLD и нажмите кнопку «Ввод (Enter)»;
| Эта команда переименовывает файл C_1251.NLS в C_1251.NLS.OLD |
10. Далее введите команду expand D:\i386\C_1251.NL_ С:\windows\system32\C_1251.NLS и нажмите кнопку «Ввод (Enter)»,
где, D:\ — это CD/DVD дисковод.
| Эта команда восстанавливает файл C_1251.NLS из архива, который находится на установочном диске |
11. Введите команду exit и нажмите клавишу «Ввод (Enter)», чтобы закрыть консоль восстановления.
12. Перезагрузите компьютер;
Corrupt file at startup, can not start up Win 7- resolved using a repair installation
Original Title: Corrupt file at startup, can not start up Win 7
Win 7 machine was running normal until I got this message at start up. When I try to run startup repair, I get the following message:
Problem Signature
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21201026
Problem Signature 05: AutoFailover
Problem Signature 06: 23
Problem Signature 07: CorruptFile
OS Version: 6.1.7600.2.0.0.256.1
Normally would not reccomend this as if the virus is still in the OS you may be able to boot but you will still have a virus infected system.
How to repair and reboot to Windows 7:
a) Insert the Windows 7 System Repair DVD or Installation DVD and reboot.
b) Select the correct keyboard input method and click ‘Next’.
Note: If you are using the Windows7 Install DVD then at the ‘Install Now’ prompt (Do not pick the Install Now option) instead choose the ‘Repair your computer’ option located in the lower left of the dispay.
c) The System Repair tool will search for a valid operating system and will report that “Windows found problems with your computer’s startup options. Do you want to apply repairs and restart your computer?”
d) Click ‘Repair and restart’ and reboot again to the Windows 7 System Repair environment.
e) Click ‘Next’ at the keyboard selection prompt and when the ‘System Recovery Options’ screen appears verify that the “Use recovery tools that can help fix problems starting Windows” is selected.
Note that on your Dual Boot system there now should be only one operating system listed. Click the ‘Next’ button.
f) Now from the menu list select the ‘Command Prompt’ option.
g) At the DOS prompt type the following three commands:
bootrec.exe /fixboot (may return an ‘Eliment not found’ message)
h) Close the command prompt window and click the ‘Startup Repair’ option.
i) The repair process may take some time, so wait until the process completes at which point you will see two messages “Windows cannot repair this computer automatically” and “Startup Repair cannot repair this computer automatically”.
These messages are the result of the radical changes made by removing the other drive. Ignore the Send/Don’t send options.
J) Close this message window by clicking on the X in the upper right corner of the Send/Don’t send window. Next click on the ‘View advanced options for system recovery and support’ option and from the main menu once again click ‘Startup Repair’. This time the repair process may only that a few seconds and when prompted “Startup Repair could not detect a problem”, click ‘Finish’ and run the ‘Startup Repair’ option one more time, click ‘Finish’, and then remove the System Repair DVD and click ‘Restart’. Reboot the computer.
Never be afraid to ask. This forum has some of the best people in the world available to help.
Trying to reinstall Windows 10 and getting a corrupt installation file error
My hard drive had issues. I had Windows 10 (upgraded from Windows 7) on this drive. The drive has been replaced and I was able to copy some (not all) files to this new drive. I am trying to install Windows 10 (from media creation tool downloaded from Microsoft) and getting this error before «Finishing up» of Windows installation:
Setup cannot continue due to a corrupted installation file. Contact the vendor of the windows installation disc or your system administrator for assistance.
I have downloaded media creation tool several times and keep getting the same error regardless.
I appreciate any help.
Replies (6)
Did you enter a key?
When asked go to the bottom of the page and click on Skip, Do this later , or I do not have one and the install will continue.
3 people found this reply helpful
Was this reply helpful?
Sorry this didn’t help.
Great! Thanks for your feedback.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this reply?
Thanks for your feedback.
I do not have the key and earlier in the installation I clicked on I do not have the product key. the error shows up much later towards the end of installation. There is no error code either.
10 people found this reply helpful
Was this reply helpful?
Sorry this didn’t help.
Great! Thanks for your feedback.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this reply?
Thanks for your feedback.
I do not have the key and earlier in the installation I clicked on I do not have the product key. the error shows up much later towards the end of installation. There is no error code either.
If you hardrive is replace you will still get activation its not a major change.
2 people found this reply helpful
Was this reply helpful?
Sorry this didn’t help.
Great! Thanks for your feedback.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this reply?
Thanks for your feedback.
3 people found this reply helpful
Was this reply helpful?
Sorry this didn’t help.
Great! Thanks for your feedback.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this reply?
Thanks for your feedback.
Do this instead, use the Media Creation Tool to download the ISO file, use rufus to create a bootable copy, then boot from then perform a clean install.
When you upgraded from a previous version of Windows or receive a new computer preinstalled with Windows 10, what happened is the hardware (your PC) will get a digital entitlement, where a unique signature of the computer will be stored on Microsoft Activation Servers. The Windows 7 or Windows 8 genuine license you were previously running will be exchanged for a diagnostics key.
Anytime you need to reinstall Windows 10 on that machine, just proceed to reinstall Windows 10. It will automatically reactivate. You will prompted to enter a product key a couple times through the installation, click I don’t have a key and Do this later.
There is no need to know or get a new key, but if you have issues with Digital Licensing or the Activation Troubleshooter, you can utilize an existing Windows 7 or Windows 8/8.1 product key you already own to reactivate if necessary. or use the reset function in Windows 10.
