Сведения о пакете обновления 1 (SP1) для Windows 7 и Windows Server 2008 R2

ВВЕДЕНИЕ

Пакет обновления 1 (SP1) для Windows 7 и Windows Server 2008 R2 теперь доступен. Этот пакет обновления содержит обновления для Windows 7 и Windows Server 2008 R2 этого адреса клиента отзывы пользователей и партнеров. Для Windows 7 и Windows Server 2008 R2 SP1 является совокупность рекомендуемых обновлений и улучшений в Windows, объединяются в одно обновление установки. Windows 7 с пакетом обновления 1 может помочь сделать компьютер более безопасным и надежным. Windows Server 2008 R2 SP1 предоставляет полный набор инновационных возможностей для виртуализации корпоративного класса. Это включает новые возможности виртуализации с динамической памяти и Microsoft RemoteFX. Конечные пользователи потребителя можно найти общие сведения о Windows 7 с пакетом обновления 1 на следующий веб-узел корпорации Майкрософт:

Дополнительная информация

Как получить Пакет обновления 1

Windows 7 с пакетом обновления 1

Чтобы получить Windows 7 с пакетом обновления 1, посетите следующий веб-узел корпорации Майкрософт:

Windows 2008 R2 Пакет обновления 1

Чтобы получить Windows 2008 R2 с пакетом обновления 1, посетите следующий веб-узел корпорации Майкрософт:

Как получить поддержку Пакет обновления 1

Поддержка для Windows 7 Пакет обновления 1

Конечные пользователи потребителя можно использовать сообщества Майкрософт обсудить проблемы, связанные с Windows 7 с пакетом обновления 1. Чтобы сделать это, посетите следующий веб-узел корпорации Майкрософт:

ИТ-специалистов можно использовать на Windows 7 pro форуме обсудить проблемы, связанные с Windows 7 с пакетом обновления 1. Чтобы сделать это, посетите следующий веб-узел корпорации Майкрософт:

Примечание. Для получения интерактивной справки по устранению неполадок проблемы установки пакета обновления 1 посетите следующий веб-узел корпорации Майкрософт:

Средства поддержки для Windows Server 2008 R2 Пакет обновления 1

ИТ-специалистов можно использовать на форуме Windows 7 ИТ-специалистов, чтобы обсуждать проблемы, относящиеся к Windows Server 2008 R2 с пакетом обновления 1. Чтобы сделать это, посетите следующий веб-узел корпорации Майкрософт:

Получение сведений об обновлениях безопасности и исправлениях, включенных в Пакет обновления 1

Чтобы просмотреть список исправлений и обновлений безопасности, включенных в SP1, посетите следующий веб-узел корпорации Майкрософт:

Примечание. В настоящее время список исправлений и обновлений безопасности доступна только на английском языке.

Дополнительные сведения о Пакет обновления 1

Конечных пользователей потребителя можно найти сведения об устройствах Windows 7 с пакетом обновления 1 на следующий веб-узел корпорации Майкрософт:

ИТ-специалистам и опытным пользователям можно найти дополнительные сведения, такие как заметки о выпуске и руководства по развертыванию пакета обновления 1 на следующих веб-узлах Microsoft TechNet:

Примечание После установки Пакет обновления 1 параметр запуска служба DHCP-клиента изменений от отключено автоматически. Чтобы избежать этого, установите исправление, описанное в статье базы знаний Майкрософт (KB) 2684965. Дополнительные сведения о 2684965 КБ щелкните следующий номер статьи базы знаний Майкрософт:

свойство тип запуска службы клиента DHCP изменяется автоматически в Windows 7 или Windows Server 2008 R2

Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2

INTRODUCTION

Service Pack 1 (SP1) for Windows 7 and for Windows Server 2008 R2 is now available. This service pack is an update to Windows 7 and to Windows Server 2008 R2 that addresses customer and partner feedback.

SP1 for Windows 7 and for Windows Server 2008 R2 is a recommended collection of updates and improvements to Windows that are combined into a single installable update.

Windows 7 SP1 can help make your computer safer and more reliable. Windows Server 2008 R2 SP1 provides a comprehensive set of innovations for enterprise-class virtualization. This includes new virtualization capabilities with Dynamic Memory and Microsoft RemoteFX.

Consumer end-users can find general information about Windows 7 SP1 at the following Microsoft website:

More Information

How to obtain Service Pack 1

Windows 7 Service Pack 1

To obtain Windows 7 SP1, visit the following Microsoft website:

Windows 2008 R2 Service Pack 1

To obtain Windows 2008 R2 SP1, visit the following Microsoft website:

How to obtain support for Service Pack 1

Support for Windows 7 Service Pack 1

Consumer end-users can use Microsoft Community to discuss issues that concern Windows 7 SP1. To do this, visit the following Microsoft website:

IT professionals can use the Windows 7 IT pro forum to discuss issues that concern Windows 7 SP1. To do this, visit the following Microsoft website:

Note For online help with troubleshooting SP1 installation issues, visit the following Microsoft website:

Support options for Windows Server 2008 R2 Service Pack 1

IT professionals can use the Windows 7 IT Pro forum to discuss issues that concern Windows Server 2008 R2 SP1. To do this, visit the following Microsoft website:

How to obtain information about hotfixes and security updates that are included in Service Pack 1

To view a list of hotfixes and security updates that are included in SP1, visit the following Microsoft website:

Note Currently, the list of hotfixes and security updates is available only in English.

More information about Service Pack 1

Consumer end-users can find information about what is included in Windows 7 SP1 at the following Microsoft website:

What is included in Windows 7 SP1 IT professionals and advanced users can find more information, such as release notes and the SP1 deployment guide, at the following Microsoft TechNet websites:

Windows Server 2008 R2 SP1 page on TechNet Note After you apply Service Pack 1, the startup setting of the DHCP Client Service changes from disabled to automatic. To avoid this, apply the hotfix that is described in Microsoft Knowledge Base (KB) article 2684965. For more information about KB 2684965, click the following article number to view the article in the Microsoft Knowledge Base:

2684965 Startup Type property in the DHCP Client service is changed to Automatic in Windows 7 or in Windows Server 2008 R2

Windows 7 SP1 and Windows Server 2008 R2 SP1 update history

Windows 7 SP1, Windows Server 2008 R2 SP1, Windows Embedded Standard 7 SP1, Windows Embedded POSReady 7, and Windows Thin PC

Learn about the security and non-security updates that are published for Windows 7 SP1 and Windows Server 2008 R2 SP1 through Windows Update. These updates address issues and improve the overall reliability of the operating system.

Windows 7 Service Pack 1 rollups (monthly rollups and security-only updates) are applicable by default to the following Windows 7-based embedded products:

Windows Embedded Standard 7 Service Pack 1.

Windows Embedded POSReady 7.

Windows Thin PC.

If a rollup is not applicable to an embedded product, we will explicitly state that it is not applicable.

The left column of this page lists all the updates that have been released for this version of Windows. We recommend that you install all the updates for Windows that are available for your device. Installing the most recent update means that you also get all the previous updates, including important security fixes.

Current status of Windows 7 SP1 and Windows Server 2008 R2 SP1

For the most up-to-date information about Known Issues for Windows and Windows Server, please go to the Windows release health dashboard.

Notes and messages

General

IMPORTANT Starting in July 2020, all Windows Updates will disable the RemoteFX vGPU feature because of a security vulnerability. For more information about the vulnerability, seeCVE-2020-1036 and KB4570006. After you install this update, attempts to start virtual machines (VM) that have RemoteFX vGPU enabled will fail, and messages such as the following will appear:

If you re-enable RemoteFX vGPU, a message similar to the following will appear:

“The virtual machine cannot be started because all the RemoteFX-capable GPUs are disabled in Hyper-V Manager.”

“The virtual machine cannot be started because the server has insufficient GPU resources.”

«We no longer support the RemoteFX 3D video adapter. If you are still using this adapter, you may become vulnerable to security risk. Learn more (https://go.microsoft.com/fwlink/?linkid=2131976)”

IMPORTANT WSUS scan cab files will continue to be available for Windows 7 SP1 and Windows Server 2008 R2 SP1. If you have a subset of devices running these operating systems without ESU, they might show as non-compliant in your patch management and compliance toolsets.

IMPORTANT Starting on January 15, 2020, a full-screen notification will appear that describes the risk of continuing to use Windows 7 Service Pack 1 after it reaches end of support on January 14, 2020. The notification will remain on the screen until you interact with it. This notification will only appear on the following editions of Windows 7 Service Pack 1:

Note The notification will not appear on domain-joined devices or devicess in kiosk mode.

Professional. If you have purchased the Extended Security Update (ESU), the notification will not appear. For more information, see How to get Extended Security Updates for eligible Windows devices and Lifecycle FAQ-Extended Security Updates.

Extended security update (ESU)

IMPORTANT Customers who have purchased the Extended Security Update (ESU) for on-premises versions of these operating systems must follow the procedures in KB4522133 to continue receiving security updates after extended support ends. Extended support ends as follows:

For more information about ESU and which editions are supported, see KB4497181.

For Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1, extended support ends on January 14, 2020.

For Windows Embedded Standard 7, extended support ends on October 13, 2020.

IMPORTANT Some customers who use Windows Server 2008 R2 SP1 and have activated their ESU multiple activation key (MAK) add-on before installing the January 14, 2020 updates might need to re-activate their key. Re-activation on the affected devices should only be required once. For information on activation, see this blog post.

Platform update for Windows 7 SP1 and Windows Server 2008 R2 SP1

Summary

This article describes a platform update for Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This update improves the range and performance of the following graphics and imaging components:

Windows Imaging Component (WIC)

Windows Advanced Rasterization Platform (WARP)

Windows Animation Manager (WAM)

XPS Document API

H.264 Video Decoder

How to obtain this update

Microsoft Download Center

The following file is available for download from the Microsoft Download Center:

Release Date: February 26, 2013

For more information about how to download Microsoft support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to obtain Microsoft support files from online services

Microsoft scanned this file for viruses, using the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help prevent any unauthorized changes to it.

Prerequisites To apply this update, you must be running Windows 7 SP1 or Windows Server 2008 R2 SP1.

For more information about how to obtain a Windows 7 or a Windows Server 2008 R2 service pack, click the following article number to view the article in the Microsoft Knowledge Base:

976932 Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2

Restart requirement You must restart the computer after you apply this update.

For more information about this update, check the «Additional information for the update» section.

Third-party information disclaimer

The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, about the performance or reliability of these products.

Compatibility issues on certain computers that have hybrid video cards

Important Some computers that have a combination of Intel and AMD video cards in a hybrid configuration have drivers installed that are incompatible with this platform update.

After you install this update and then restart the computer, the computer may crash because of these compatibility issues. In this situation, you receive a Stop error message that resembles the following:

Note This Stop error includes the «PAGE_FAULT_IN_NONPAGED_AREA» text and the Igdpmd64.sys or Igdpmd32.sys file name.

To resolve this issue, you may have to install update 2834140 («0x00000050» Stop error after you install update 2670838 on a computer that is running Windows 7 SP1 or Windows Server 2008 R2 SP1). Additionally, use the following tables to install the latest compatible drivers for your video card.

Latest compatible drivers

Inspiron 14R N4110 & N4120

AMD Radeon HD 6470M
AMD Radeon HD 6630M
AMD Radeon HD 7450M
AMD Radeon HD 7650M

Vostro 3350 & 3550

AMD Radeon HD 6630M
AMD Radeon HD 7650M

Inspiron 15R N5110

AMD Radeon HD 6470M

AMD Radeon HD 6630M
AMD Radeon HD 7650M

Inspiron 14 N4050

AMD Radeon HD 6470M

AMD Radeon HD 6470M
AMD Radeon HD 7450M

Latest compatible drivers

Pavilion dv6 (dv6-6007tx, dv6-6b06eg, dv6-6b07sz, dv6-6b56ex)
Pavilion dv7 (dv7-6135dx, dv7-6197ca, dv7-6b40ew)

AMD Radeon HD 6490M

AMD Radeon HD 6770M

Pavilion g4 (1212tx)
Pavilion g6 (1160ee, 1320ee)
Pavilion g7 (1226em)

How to obtain and install Windows 7 SP2

Since the release of Windows 7 back in 2009, hundreds of updates have been issued for the aging OS, and anyone who has done a clean install of Windows 7 knows how painful the updating process can be.

Officially, Microsoft only released a single service pack for Windows 7 — Service Pack 1 was released to the public on February 22, 2011. However, despite promising that Windows 7 would only have one service pack, Microsoft decided to release a «convenience rollup» for Windows 7 in May 2016. This single package combines all previously released updates from the release of SP1 to April 2016. So even though Microsoft isn’t calling this a service pack, for all intents and purposes, it serves as one.

This article will show you how to install the convenience update (SP2 for Windows 7).

Note: System Administrators can use DISM to integrate this package into their installation media to simplify future Windows 7 installations.

1. Prerequistes

Before installing the convenience update, make sure:

• You are running Windows 7 SP1
• You have at least 5 GB of free space available on your system disk
• You have installed KB3020369 (download links below)

2. Dow nload

Once the prerequisites are met, you can download the convenience update from the links below.

3. Install

When the download has finished, double-click the file, and follow the on-screen instructions. This is a large update, so the searching and installation process may take a while. Please be patient.

Note: Remember, since Microsoft isn’t calling this update a service pack, the version number listed in System Properties will remain Windows 7 SP1.

4. Install other Windows Updates

The convenience rollup only contains the updates released after Service Pack 1 and before April 2016. Any updates for Windows 7 that Microsoft has released since then will not be installed, so you should run Windows Update to install any other available updates.

Also, the convenience update does not include Internet Explorer 11 or the latest .NET Framework Updates. You should install those packages manually or from Windows Update if you need them.

Related Articles

Was this article helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this article?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this article?

Thanks for your feedback.

Comments (112) 

* Please try a lower page number.

* Please enter only numbers.

* Please try a lower page number.

* Please enter only numbers.

132 people found this comment helpful

Was this comment helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this comment?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this comment?

Thanks for your feedback.

16 people found this comment helpful

Was this comment helpful?

Sorry this didn’t help.

Great! Thanks for your feedback.

How satisfied are you with this comment?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this comment?

Thanks for your feedback.

I have done a clean install of Windows 7 Pro SP1 (32bit), on a clean disk.

1. WU fails to identify any update, regardless of how long it runs.
   1. After the 1st restart, WU shows 13 updates installed, evidently included on the install disk.
   2. WU reports that it has «never» checked nor updated. It doesn’t report any error. Just runs on and on, getting nowhere.
2. I have set WU to «Download but let me decide what/when to install». Never has downloaded anything.
3. I downloaded:
   1. WindowsUpdateAgent-7.6-x86 to replace the original. It did install itself. Makes no difference. Endlessly searches for updates.

I’ve read all the advice about how to obtain the Update Rollup from the Microsoft Update Catalog, using IE. I’ve separately updated to IE11. I’ve looked at the custom IE settings and found that they are already correctly set.

When I try to obtain the Update Rollup, IE warns that the site wants to install a program. I approve. Seems to do that. Then when I proceed a message displays that that program will not run. So I cannot obtain the Catalog item 3125574 that I need.

Meanwhile I have downloaded these two updates as separately recommended, to prepare for the Rollup:

Neither one will install. Each searches endlessly for «Updates installed on this machine.» Never finish searching, never find anything, no errors, no installation.