Installing Windows 10 on a super cheap tablet: Learn from my mistakes

By Desire Athow 25 August 2015

A few steps that turned into an ordeal

Windows 10 is pretty lean and easy to install but you still need a keyboard and a mouse. As I discovered in my previous experiments, the OS installation process doesn’t coerce you into plugging your device into a power socket.

You can’t run Windows 10 from Windows 8.1 on the Linx 7 tablet – trying to do so will bring up an error message saying that Windows 10 will not install on a compressed operating system (the Linx tablet uses a slightly different version of Windows 8.1, one that comes with WIMBoot).

The only other option is to perform a clean installation, and that’s exactly what I did. To achieve this, first of all I charged the tablet, then I used an adaptor (micro-USB to USB), a 4-in-1 USB hub, a Bluetooth keyboard and a USB memory stick with the latest Windows 10 ISO and the necessary drivers.

You will have to access the BIOS and modify the boot sequence, then reboot. Follow the instructions (this is a standard Windows 10 setup, so should be fairly easy to execute) until you boot to the desktop (remember to remove the USB Boot drive or the setup process will start again).

Note that you won’t be able to use the touchscreen during installation and the whole process will take place in portrait mode. The first thing you want to do is get Wi-Fi running; look for a Generic SDIO device in the device manager.

No sign of touch

From there, I couldn’t get the touchscreen to work and that was it – no matter how hard I tried, I couldn’t get the right driver. I don’t blame Windows 10 but it shows that on more exotic hardware, Microsoft’s latest operating system might have a very hard time getting it right.

As for the Linx 7, I am currently forced to use it with a keyboard and a mouse, and the performance is far from being silky smooth even without any applications running. That’s what you get running on 1GB of RAM and 32GB of onboard storage.

But you can expect Microsoft to tweak Windows 10 further and deliver a slimline, compressed version like it did for Windows 8.1 for tablets, which will hopefully improve overall performance.

After initially installing Windows 10 10122, I updated to the final version of Windows 10 from inside the Insider preview itself using a standard bootable USB key. Wi-Fi is on by default but no sign of trouch capabilities.

Current page: How to install Windows 10 on a tablet

Wacom Tablet Driver

Wacom Tablet Driver 6.3.42 LATEST

Windows 7 / Windows 7 64 / Windows 8 / Windows 8 64 / Windows 10 / Windows 10 64

Wacom Tablet Driver 2021 full offline installer setup for PC 32bit/64bit

The Wacom Tablet Driver is an application on your computer that allows you to interact with your Wacom device(s). You can find the Desktop Center on Windows PC in the Start Menu under Tablet or on the Mac in the Applications folder under Wacom Tablet. The left side of the Wacom Desktop Center screen lists the main menu options. Clicking on the main menu option will display the tools associated with that option on the right side of the Wacom Tablet Drivers app screen.

It supports the Intuos5 (PTH), and Intuos4 (PTK), and the Cintiq 24HD Touch, MobileStudio Pro, Cintiq Pro 32, Cintiq Pro 24, Cintiq Pro 16, Cintiq Pro 13, Cintiq 22HD Touch, Cintiq 22HD, Wacom Intuos Pro Paper, One by Wacom, Wacom Cintiq, Wacom Intuos Pro, Cintiq 27QHD touch, Cintiq 24HD, Cintiq 22HD, Cintiq 21UX, Cintiq 13HD, Cintiq 12WX, Cintiq 20WSX, DTU-2231, DTU-1931 and DTU-1631 pen display tablets, and more.

• My Devices: Customize your device settings, redeem software, and access product documentation.
• Backup Settings: Backup, restore, and manage your device settings on your computer or in the Cloud.
• Updates: If available, allows you to install the latest driver, firmware, or BIOS update for your device.
• Support: Access Support, check driver functions, view diagnostic data, or enable driver logging for support purposes.
• Store: Visit the store to research and purchase products and accessories.

Logging in using your Wacom ID

You can log in with your Wacom ID (or create one) in order to access the Cloud to save and restore device settings. To log in:

• Click Login in the upper, right-hand corner of your Wacom Desktop Center screen.
• Sign in with your email and password, or use the Click here link if you don’t already have an account.
• Once logged in, click your name in the upper, right-hand corner of the Wacom Tablet Driver screen to view and update your profile.

How to install Wacom Tablet Driver

• Download the driver by saving the file to an easily accessible folder.
• Double click on the downloaded file to run it.
• Follow the Installation Wizard steps.
• Reboot computer.

Note: Connect a USB cable between the tablet and the USB port of your computer directly (Only Pen Tablets).

Download Windows 10

Before updating, please refer to the Windows release information status for known issues to confirm your device is not impacted.

Windows 10 October 2020 Update

The Update Assistant can help you update to the latest version of Windows 10. To get started, click Update now.

Create Windows 10 installation media

To get started, you will first need to have a license to install Windows 10. You can then download and run the media creation tool. For more information on how to use the tool, see the instructions below.

Here’s when to use these instructions:

• You have a license to install Windows 10 and are upgrading this PC from Windows 7 or Windows 8.1.
• You need to reinstall Windows 10 on a PC you’ve already successfully activated Windows 10.

If you are installing Windows 10 on a PC running Windows XP or Windows Vista, or if you need to create installation media to install Windows 10 on a different PC, see Using the tool to create installation media (USB flash drive, DVD, or ISO file) to install Windows 10 on a different PC section below.

Note: Before you install Windows 10, check to make sure your PC meets the system requirements for Windows 10. We also recommend going to the PC manufacturer’s website for any additional info about updated drivers and hardware compatibility.

1. Select Download tool, and select Run. You need to be an administrator to run this tool.
2. On the License terms page, if you accept the license terms, select Accept.
3. On the What do you want to do? page, select Upgrade this PC now, and then select Next.

After downloading and installing, the tool will walk you through how to set up Windows 10 on your PC. All Windows 10 editions are available when you select Windows 10, except for Enterprise edition. For more information on Enterprise edition, go to the Volume Licensing Service Center.

• If you don’t have a license to install Windows 10 and have not yet previously upgraded to it, you can purchase a copy here: https://www.microsoft.com/en-us/windows/get-windows-10.
• If you previously upgraded to Windows 10 on this PC and you’re reinstalling it, you don’t need to enter a product key. Your copy of Windows 10 will automatically activate later using your digital license.

When Windows 10 is ready to install, you’ll see a recap of what you’ve chosen, and what will be kept through the upgrade. Select Change what to keep to set whether you would like to Keep personal files and apps, or Keep personal files only, or choose to keep Nothing during the upgrade.

Save and close any open apps and files you may be running, and when you’re ready, select Install.

It might take some time to install Windows 10, and your PC will restart a few times. Make sure you don’t turn off your PC.

Follow these steps to create installation media (USB flash drive or DVD) you can use to install a new copy of Windows 10, perform a clean installation, or reinstall Windows 10.

Before you download the tool make sure you have:

• An internet connection (internet service provider fees may apply).
• Sufficient data storage available on a computer, USB or external drive for the download.
• A blank USB flash drive with at least 8GB of space or blank DVD (and DVD burner) if you want to create media. We recommend using a blank USB or blank DVD, because any content on it will be deleted.
• When burning a DVD from an ISO file, if you are told the disc image file is too large you will need to use Dual Layer (DL) DVD Media.

Check a few things on the PC where you want to install Windows 10:

• 64-bit or 32-bit processor (CPU). You’ll create either a 64-bit or 32-bit version of Windows 10. To check this on your PC, go to PC info in PC settings or System in Control Panel, and look for System type.
• System requirements. Make sure the PC meets the system requirements for Windows 10. We also recommend going to the PC manufacturer’s website for additional info about updated drivers and hardware compatibility.
• Language in Windows. You’ll need to choose the same language when you install Windows 10. To see what language you’re currently using, go to Time and language in PC settings or Region in Control Panel.
• Edition of Windows. You should also choose the same edition of Windows. To check what edition you’re currently running, go to PC info in PC settings or System in Control Panel, and look for Windows edition. Windows 10 Enterprise isn’t available in the media creation tool. For more info, go to the Volume Licensing Service Center.
• Microsoft Office products. If you just purchased a new device that includes Office 365, we recommend redeeming (installing) Office before upgrading to Windows 10. To redeem your copy of Office, please see Download and install Office 365 Home, Personal, or University on your PC. For more information, check How to upgrade to Windows 10 on new devices that include Office 365.

If you have Office 2010 or earlier and choose to perform a clean install of Windows 10, you will need to locate your Office product key. For tips on locating your product key, check Find your Office 2010 product key or Enter the product key for your Office 2007 program.

Using the tool to create installation media:

1. Select Download tool now, and select Run. You need to be an administrator to run this tool.
2. If you agree to the license terms, select Accept.
3. On the What do you want to do? page, select Create installation media for another PC, and then select Next.

Select the language, edition, and architecture (64-bit or 32-bit) for Windows 10. This table will help you decide which edition of Windows 10 you’ll choose:

Your current edition of Windows	Windows 10 edition
Windows 7 Starter Windows 7 Home Basic Windows 7 Home Premium Windows 7 Professional Windows 7 Ultimate Windows 8/8.1 Windows 8.1 with Bing Windows 8 Pro Windows 8.1 Pro Windows 8/8.1 Professional with Media Center Windows 8/8.1 Single Language Windows 8 Single Language with Bing Windows 10 Home Windows 10 Pro	Windows 10
Windows 8/8.1 Chinese Language Edition Windows 8 Chinese Language Edition with Bing	Windows 10 Home China​

Select which media you want to use:

• USB flash drive. Attach a blank USB flash drive with at least 8GB of space. Any content on the flash drive will be deleted.
• ISO file. Save an ISO file to your PC, which you can use to create a DVD. After the file is downloaded, you can go to location where the file is saved, or select Open DVD burner, and follow the instructions to burn the file to a DVD. For more info about using an ISO file, see Additional methods for using the ISO file to install Windows 10 section below.

After the installation media is created, follow the steps below to use it.

After completing the steps to install Windows 10, please check that you have all the necessary device drivers installed. To check for updates now, select the Start button, and then go to Settings > Update & Security > Windows Update, and select Check for updates. You may also wish to visit your device manufacturer’s support site for any additional drivers that may be needed.

Note: Drivers for Surface devices may be found on the Download drivers and firmware for Surface page.

Before you install Windows 10, it’s a good idea to save any work and back up your PC before you start. If you used the media creation tool to download an ISO file for Windows 10, you’ll need to burn it to a DVD before following these steps.

1. Attach the USB flash drive or insert the DVD on the PC where you want to install Windows 10.
2. Restart your PC.

If your PC does not automatically boot to the USB or DVD media, you might have to open a boot menu or change the boot order in your PC’s BIOS or UEFI settings. To open a boot menu or change the boot order, you’ll typically need to press a key (such as F2, F12, Delete, or Esc) immediately after you turn on your PC. For instructions on accessing the boot menu or changing the boot order for your PC, check the documentation that came with your PC or go to the manufacturer’s website. If you do not see the USB or DVD media device listed within the boot options, you may need to reach out to the PC manufacturer for instructions for temporarily disabling Secure Boot in your BIOS settings.

If changing the boot menu or order doesn’t work, and your PC immediately boots into the OS you want to replace, it is possible the PC had not fully shut down. To ensure the PC fully shuts down, select the power button on the sign-in screen or on the Start menu and select Shut down.

On the Install Windows page, select your language, time, and keyboard preferences, and then select Next.

Select Install Windows.

If you downloaded an ISO file for Windows 10, the file is saved locally at the location you selected. If you have a third-party DVD burning program installed on your computer that you prefer to use for creating the installation DVD, that program might open by going to the location where the file is saved and double-clicking the ISO file, or right-click the ISO file, select Open with and choose your preferred DVD burning software.

If you want to use the Windows Disk Image Burner to create an installation DVD, go to the location where the ISO file is saved. Right-click the ISO file and select Properties. On the General tab, click Change and select Windows Explorer for the program you would like to use to open ISO files and select Apply. Then right-click the ISO file and select Burn disc image.

If you want to install Windows 10 directly from the ISO file without using a DVD or flash drive, you can do so by mounting the ISO file. This will perform an upgrade of your current operating system to Windows 10.