SOLVED: Windows 10 Won’t Install or Download Updates

While Windows 10 is the latest and greatest iteration of the Windows Operating System in existence, it is far from perfect. That being the case, Microsoft periodically rolls out tons of updates for both Windows 10 and the programs and applications that it contains. Unlike with older versions of Windows, however, all updates rolled out to Windows 10 computers via Windows Update are mandatory and are automatically downloaded and installed at one time or another. Regardless of the important status of an update and regardless of whether or not you want to install it, it will eventually be downloaded and installed, although you do have the power to delay the occurrence slightly.

Some Windows 10 users, unfortunately, have been and continue to be affected by an issue where their computers accumulate tons of pending updates, some of which are marked as waiting to be downloaded, some marked as waiting to be installed, but none actually being downloaded or installed no matter how many times affected users try to download and install them. When users affected by this issue go into Windows Update, they see a list of all of the updates available for their computer but are unable to download and/or install any of them even though some are marked as waiting to be downloaded and some waiting to be installed.

Thankfully, though, this problem is not a dead-end problem and can be fixed by pretty simple means. The following are the three most effective solutions that you can use to try and fix this problem:

Repair Corrupt System Files

Download and run Restoro to scan for corrupt files from here, if files are found to be corrupt and missing repair them and then check if it fixes the issue, if not then proceed with Solutions listed below.

Before you Proceed: Make sure to leave the process for at least an hour or two to make sure that Windows isn’t just initializing updates.

Solution 1: Run the Windows Update Troubleshooter

If a Windows 10 component is not working or behaving the way it is supposed to, what you need to do is simply run Windows 10’s built-in Troubleshooting utility, but run it specifically for the component that is malfunctioning. The same applies to Windows Update – since Windows Update is behaving strangely, the first solution you should try out is running the Windows Update Troubleshooter. To do so, you need to:

1. Open the Control Panel.
2. Switch to Icons
3. Click on Troubleshooting.
4. Click on View all in the left pane.
5. Click on Windows Update.
6. Click on Next, and then proceed with the troubleshooter all the way through to the end, following the on-screen instructions along the way.

The Troubleshooter will try to identify any and all problems with Windows Update and fix any problems that it finds. Once you have successfully run the Troubleshooter, you should restart your computer and try downloading and installing Windows Updates once it boots up to see whether or not the issue still persists.

Solution 2: Ensure that all services related to Windows Update are running

You may be facing this Windows Update issue if one or more of the services pertaining to Windows Update is either not enabled or are not running on your computer. If that is the case, this issue can be easily remedied by making sure that all Windows Update-related services are enabled and running.

1. Hold down the Windows Logo key, and while doing so, press R to open a Run
2. Type services.msc into the Run dialog and press Enter.
3. Locate and right-click on the Windows Update service, and click on Properties.
4. Set the service’s Startup type to Automatic, if the service is stopped, click on Start to start it, click on Apply and then click on OK.
5. Locate and right-click on the Background Intelligent Transfer Service (BITS), and click on Properties.
6. Repeat step 4.
7. Locate and right-click on the Cryptographic Service, and click on Properties.
8. Repeat step 4.

Close the utility, restart your computer and check to see whether or not the problem has been fixed once it boots up.

Solution 3: Using a Registry Tweak to reset Windows Update

If the solutions provided above doesn’t fix your problem there is a possibility that registry keys are corrupted or modified there is a Registry Tweak that you can try, basically it will reset the Windows Update‘s registry keys and set them to default which can potentially fix the issue you are having.

1. Click hereto download the Registry Tweak.
2. Wait for the Registry Tweak to be downloaded.
3. Navigate to where the Tweak was downloaded to and double-click on it to run it.
4. There will be a pop-up asking “Are you sure you want to continue?” Press “Yes”
5. Now press ok.
6. Restart your Computer then check to see if the issue still persists.

Solution 4: Fix the issue via an elevated Command Prompt

If none of the solutions listed and described above have worked for you, you may just be able to fix this issue through an elevated Command Prompt. In order to do so, you need to:

1. Right-click on the Start Menu button to open the WinX Menu.
2. Click on Command Prompt (Admin).
3. One by one, type the following commands into the elevated Command Prompt, pressing Enter after typing in each one and waiting for one command to be executed fully before typing in the next:

Once all of the commands listed above have been fully executed, close the Command Prompt and restart your computer.

Check whether or not you are now able to download and install updates via Windows Update once your computer boots up.

Solution 5: Turn OFF Metered Connection

In some cases, the internet connection that you are using might be set up as a metered connection due to which the download restriction might be implemented on it. Therefore, in this step, we will be turning this metered connection OFF and then check to see if the issue still persists. For that:

1. Press “Windows” + “I” to open settings.
2. Click on the “Networkand Internet” option. Selecting “Network and Internet” Options
3. Click on the “Wifi” option on the left pane and select “Manage known Networks” in the next window. Accessing the Manage known networks menu
4. Click on the Wifi name in the next window and select “Properties”.
5. Click on the “Toggle” for “Set as Metered Connection” to turn it off.
6. Check to see if the issue persists.

unable to install updates in Windows 10

Original Title-was great

things were going well. I finally was able to install 10074, after numerous attempts. thought great this cool. and within two days all of a sudden I cannot seem to install updates or receive notifications. I tried re image repair to no avail as win 10 is non compatable I am told. anyone else have similar problem? and then the audio issues , one hour works next no sound. cannot find Cortana either.

Thank you for posting your query in Windows 10 Technical Preview Forums.

I understand that you are unable to download and install Windows Updates on Windows 10 Technical Preview 10074 build.

1. Are you able to install Windows 10 Technical Preview successfully?
2. What is the make and model of the computer?
3. What is the complete error code or error message that you receive?

To fix the issue, please try the methods below:

Method 1: Check the System Date and Time on your computer.

Let’s first check if the system date and time are correct. If they are showing incorrect values, then follow the steps below and correct the time and date according to your time zone.

a. Press Windows key + R key on your keyboard.

b. Type “control» and click on «Date and Time».

c. Click Change date and time button (To change the time zone click on time zone tab).

d. Click Apply and Ok to save the date and time.

If the issue still persists try method 2.

Method 2: Try to reset manually Windows update components and check if it helps.

Manually reset Windows Update components

Important Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry for restoration

in case problems occur.

To reset the Windows Update components, follow these steps:

1.Open a command prompt. To do this, use one of the following methods, depending on your version of Windows: •Windows 8.1 and Windows 8: From the Start screen, swipe in from the right side to display the charms, select Search, and then search for cmd. (Or, if you are using a keyboard and mouse, type cmd at the Start screen.) In the search results, press-and-hold or right-click Command Prompt, and then select Run as Administrator.

•Windows 7 and earlier versions: Press the Windows logo key + R, type cmd in the Run box, and then press Enter. Right-click cmd, and then select Run as Administrator.

2. Stop the BITS service, the Windows Update service, and the Cryptographic service. To do this, at a command prompt, type the following commands. Make sure that you press Enter after you type each command. •net stop bits

•net stop wuauserv

•net stop appidsvc

•net stop cryptsvc

3. Delete the qmgr*.dat files. To do this, at a command prompt, type the following command, and then press Enter:

Del «%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat»

4. If this is your first attempt at resolving your Windows Update issues by following the steps

in this article, you should skip step 4 and go to step 5. You should follow step 4 at this point in the troubleshooting only if you cannot resolve your Windows Update issues after you follow all steps except step 4. (Step 4 is performed by the «Aggressive» mode of the Fix it Solution that was mentioned earlier.)a.Rename the softare distribution folders backup copies. To do this, at a command prompt, type the following commands. Make sure that you press Enter after you type each command.•Ren %systemroot%\SoftwareDistribution SoftwareDistribution.bak

•Ren %systemroot%\system32\catroot2 catroot2.bak

b.Reset the BITS service and the Windows Update service to the default security descriptor. To do this, at a command prompt, type the following commands. Make sure that you press Enter after you type each command.

•sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

•sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

5. At a command prompt, type the following command, and then press Enter:

Windows Update fails to install or will not download in Windows 10

Sometimes, some Windows Update fails to download, or just refuse to get installed on your computer even when you try a couple of times. If you face this problem where Windows Updates will not install or download, then this tutorial will help you identify and troubleshoot the problem.

Windows Update failed to install

If Windows Update fails to install, is not working, updates will not download or keep failing, on your Windows 10/8/7 then these suggestions will help you troubleshoot & fix Windows Updates.

1. Try again
2. Delete Temporary Files and Browser Cache
3. Disable your Firewall and Anti-virus software
4. Run SFC and DISM
5. Run Windows Update Troubleshooter
6. Manually Reset Windows Update Components to default
7. Use FixWU
8. Flush the SoftwareDistribution Folder
9. Reset the Catroot folder
10. Check Windows Update Services status
11. Check Windows Update log file
12. Clear pending.xml file
13. Clear the BITS queue
14. Delete incorrect Registry values
15. Run Windows Module Installer
16. Run Background Intelligent Transfer Service Troubleshooter
17. Download its stand-alone installer
18. Run Windows Update in Clean Boot State
19. Take the help of Microsoft Virtual Agent
20. Contact Microsoft Support.

Let us see all these potential fixes in detail. Do create a system restore point first. Go through the entire post and then see which of these may apply to your system. You may then try any of these, in no particular order.

1] Try again

As mentioned earlier, many times, an update may fail to install in the first instance, but for some inexplicable reason, succeeds in the 2nd or 3rd try. So try a couple of times.

2] Delete Temporary Files and Browser Cache

If you are unable to install Windows Updates, first clear up your Temporary Files and Browser Cache, reboot, and try again. See if this helps resolve the issue. Best and easy to use the built-in Disk Cleanup utility or CCleaner.

3] Disable your Firewall and Anti-virus software

Temporarily Disable your Firewall and Anti-virus software and try again. Here is a list of Windows files and folders you may exclude from Antivirus scans.

4] Run SFC and DISM

Run System File Checker to replace potentially corrupted system files.

You can also fix corrupted Windows Update system files using DISM Tool. The Dism.exe tool can be used in different situations, and one of them is to repair a corrupted Windows Update files. Do note that you need to run a different command if you want to repair corrupted Windows Update System Files. If you run the usual /RestoreHealth command, it may not necessarily help.

DISM will replace potentially corrupted or missing system files with good ones. However, if your Windows Update client is already broken, you will be prompted to use a running Windows installation as the repair source or use a Windows side-by-side folder from a network share, as the source of the files.

You will then be required to run the following command instead:

Here you have to replace the C:\RepairSource\Windows placeholder with the location of your repair source.

Once the process is complete, DISM will create a log file in %windir%/Logs/CBS/CBS.log and capture any issues that the tool finds or fixes.

These can help fix problems that might prevent Windows Updates from installing.

5] Run Windows Update Troubleshooter

Use the Windows Update Troubleshooter from Microsoft. It resets Windows Updates settings to defaults. You may also run the Online Windows Troubleshooter from Microsoft.

6] Manually Reset Windows Update Components to default

7] Use FixWU

Use our Fix WU tool and see if it helps. It re-registers all the dll , ocx , and ax files required for the proper functioning of Windows Updates.

8] Flush the Software Distribution Folder

Flush the SoftwareDistribution Folder. Run Command Prompt as administrator. In the CMD box that appears on the computer screen, enter the following strings of text, one at a time, and hit Enter.

Now browse to the C:\Windows\SoftwareDistribution folder and delete all the files and folders inside.

If the files are in use, restart your device. After rebooting, run the commands above again. Your Windows Store App needs to be closed, by the way, so do not start it.

Now you will be able to delete the files from the mentioned Software Distribution folder. Now in the Command Prompt windows, type the following commands one at a time, and hit Enter:

Reboot. If you are using Windows Update, try using Microsoft Updates or vice versa.

9] Reset the Catroot folder

Reset the Catroot folder and see. To reset the catroot2 folder do this:

Open an elevated Command Prompt, type the following command one after the other and hit Enter:

Next, delete all the contents of the catroot2 folder.

Having done this, in the CMD windows, type the following and hit Enter:

Your catroot folder will be reset, once you start Windows Update again.

10] Check Windows Update Services status

The default configuration on a standalone Windows 10 PC is as follows:

• Windows Update Service – Manual (Triggered)
• Windows Update Medic Services – Manual
• Cryptographic Services – Automatic
• Background Intelligent Transfer Service – Manual
• DCOM Server Process Launcher – Automatic
• RPC Endpoint Mapper – Automatic
• Windows Installer – Manual.

This will ensure that the required Services are available.

Apart from the direct service, you should find the dependencies of Windows Update service and ensure if they are running or not.

To get started, search for “services” in the Taskbar search box and click on the search result. After opening the Services window, find out Windows Update, DCOM Server Process Launcher, and RPC Endpoint Mapper. Check if they are running or not.

If not, you need to start those services one after one.

11] Check Windows Update log file

If still, you have a problem then, go to C:\Windows\WindowsUpdate.log and look for the most recent entry. This will be present towards the end of the log. Any failed updates will have error code/s written next to them. Note them down. If you find just too many entries too confusing delete this WindowsUpdate.log and try installing the problematic updates again.

Now open the newly re-created WindowsUpdate log file and have a look at its contents.

The warnings will probably appear as -: WARNING: Failed to find updates with error code XXXXXXXX.

Now Right-click Computer > Manage > Event Viewer > Applications and Service Logs > Microsoft > Windows > WindowsUpdateClient > Operational . Check out for any Critical Message or Warning.

Next, refer to the Windows Update Error Codes. This will give you the direction in which you may have to look for the solution. You may also search for the Windows Update error code here and see if a specific solution is available.

12] Clear pending.xml file

Open an elevated command prompt windows, type the following and hit Enter:

This will rename pending.xml file to pending.old. Now try again.

13] Clear the BITS queue

Clear the BITS queue of any current jobs. To do this, type the following in an elevated CMD and hit Enter:

14] Delete incorrect Registry values

Open Registry Editor and navigate to the following key:

Right-click COMPONENTS. Now in the right-pane, delete the following if they exist:

• PendingXmlIdentifier
• NextQueueEntryIndex
• AdvancedInstallersNeedResolving

Restart your computer and try again.

15] Run Windows Module Installer

The Windows Module Installer is a built-in Windows 10 service. It lets you fix the Windows updates which are stuck.

To use this, open a command prompt with admin privileges.

Type the following and hit Enter:

Once successfully executed, you should see [SC] ChangeServiceConfig SUCCESS display within the Command Prompt console.

Exit the command prompt, and check if the buttons are back to normal.

16] Run Background Intelligent Transfer Service Troubleshooter

Run the Background Intelligent Transfer Service Troubleshooter and see if it helps. Background Intelligent Transfer Service or BITS helps in the transfer, download or upload of files between a client and server, and provides progress information related to the transfers. It also plays a role in the download of files from a peer. This Windows Service is essential for Windows Updates to work properly.

17] Download its stand-alone installer

Search on the Microsoft Update Catalog website for the Windows Update patch using the Update KB number, and download its stand-alone installer. Now apply the patch manually. Search for just the number; don’t include KB.

18] Run Windows Update in Clean Boot State

Boot in Clean Boot State and run Windows Update and see if this helps. It works in most cases.

19] Take the help of Microsoft Virtual Agent

If you’re getting an error downloading or installing Windows Updates, you could also take the help of Microsoft Virtual Agent, by clicking here.

20] Contact Microsoft Support

If nothing helps, you can always contact Microsoft Support. They will surely be able to help you.

We hope something here has helped you fix your Windows Updates issues.