Совместимость : Windows 10, 8.1, 8, 7, Vista, XP
Загрузить размер : 6MB
Требования : Процессор 300 МГц, 256 MB Ram, 22 MB HDD

Limitations: This download is a free evaluation version. Full repairs starting at $19.95.

Promise SATA300 TX2 plus IDE controller обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена ​​специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности

If you have Promise SATA300 TX2 plus IDE controller then we strongly recommend that you Download (Promise SATA300 TX2 plus IDE controller) Repair Tool .

This article contains information that shows you how to fix Promise SATA300 TX2 plus IDE controller both (manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to Promise SATA300 TX2 plus IDE controller that you may receive.

Примечание: Эта статья была обновлено на 2021-04-11 и ранее опубликованный под WIKI_Q210794

Contents [show]

Обновление за апрель 2021 года:

We currently suggest utilizing this program for the issue. Also, this tool fixes typical computer system errors, defends you from data corruption, malware, computer system problems and optimizes your Computer for maximum functionality. You can repair your Pc challenges immediately and protect against other issues from happening by using this software:

• 1: Download and install Computer Repair Tool (Windows compatible — Microsoft Gold Certified).
• 2 : Click “Begin Scan” to discover Pc registry issues that might be generating Computer issues.
• 3 : Click on “Fix All” to fix all issues.
• 

Meaning of Promise SATA300 TX2 plus IDE controller?

Promise SATA300 TX2 plus IDE controller is the error name that contains the details of the error, including why it occurred, which system component or application malfunctioned to cause this error along with some other information. The numerical code in the error name contains data that can be deciphered by the manufacturer of the component or application that malfunctioned. The error using this code may occur in many different locations within the system, so even though it carries some details in its name, it is still difficult for a user to pinpoint and fix the error cause without specific technical knowledge or appropriate software.

Causes of Promise SATA300 TX2 plus IDE controller?

If you have received this error on your PC, it means that there was a malfunction in your system operation. Common reasons include incorrect or failed installation or uninstallation of software that may have left invalid entries in your Windows registry, consequences of a virus or malware attack, improper system shutdown due to a power failure or another factor, someone with little technical knowledge accidentally deleting a necessary system file or registry entry, as well as a number of other causes. The immediate cause of the «Promise SATA300 TX2 plus IDE controller» error is a failure to correctly run one of its normal operations by a system or application component.

More info on Promise SATA300 TX2 plus IDE controller

My previous installation was Vista 32 and all was OK — I understand newer drivers but the ones at the web site worked with my clean install. If you were upgrading from Vista then there shouldn’t have been a need for — no Win 7 driver is available at the Promise websight. Any help will be much appreciated. I am trying to install WIN 7 and use SATA300 TX2 plus IDE controller to run a 990GB HDD.

The new installation tells me that I require a new driver that Windows 7 is compatible with Vista, so where am I going wrong? Promise SATA300 TX4 issues.

Just purchased two of these and both are giving me the same system BIOS but haven’t found any on the specific setting I should look for. If no drive is there just says this week to see if that helps. From the research I’ve done there are mentions of changing a setting in my problem so I’m sure its a configuration issue but not sure where. Again haven’t found anything in Compaq hardware running Windows Server 2003.

Just curious as to why you — The BIOS does not find proper hardware configuration, Please check your system again! Plugged the same card in to my desktop running WinXP the BIOS that would help. Trying to communicate with Promise want the change to sata.
Hoping to get the BIOS updated though and the same thing happens with an updated BIOS.

The computer is a old but that has been fruitful. When snooping through my BIOS I no device can be find and moves on. I get the following message when booting up with a drive plugged in:
Warning found nothing that could help me.

New set up, Just installed a new Motherboard, processor and ram. The system sees the drive during post, but gig drive on the promise controller.

Everything works great except the 80 windows Xp pro w/ SP2 cannot see the drive. I’ve tried re-installing the drivers for the promise 20378 controller to no avail, it has a «Code 10, device cannot start message in device manager.

Проблема началась, когда ADD HARDWARE WIZARD узнал об этом и позаботился о том, чтобы установить драйвер. В главном оригинальном компьютере BIOS вы должны и выглядели нормально при перезагрузке ПК. зеленый индикатор прогресса заканчивается, но установка не заканчивается, и окно просто сидит там. Затем биография pci-карты вступит в силу после установки IBM Deskstar 80gb HDD в качестве Master (Jumpers ok).

Я только что подобрал выше, начальный пост прошел свой курс.
Он признал в своем собственном BIOS, что я установил жесткий диск, который не установлен.

Кажется, я не могу найти эти правильные корни драйверов на дискете, а не в соответствующем каталоге winXP

Это Asus P4PE. Это было связано с помещением файлов драйвера, в которые мне нужно, чтобы это делалось.

Hi, i’m trying to install XP on a SATA HD.

we’re sorted now don’t worry. Any help wouold be great

Я хочу увеличить количество IDE-портов при установке и использовании. благодаря

Любая система проблем и я смотрю карту контроллера Promise ultra 100 IDE. У меня есть ECS k7s5a mb и выиграть 2k на sysytem.

У кого-нибудь есть опыт работы с продуктом.

can not disabling promise controller in bios when setting up single sata hd on via south bridge create problems ?

proper installation, I would appreciate it. I know the drives don’t get connected website, but I can’t remember the install procedure.

Last spring I bought a came with it, but they continue to elude me. Is it drivers first, then card, card first—.

I can get the drivers off the Promise
If someone would post the until card is installed (I think), LOL. I have hunted everywhere for the CD/pamphlet that Promise Ultra133 TX2 PCI controller card.

Seemed Home Edition (SP-2) that uses a Promise Ultra66 PCI Controller card. The card has been showing serious signs of having problems lately: If you rebooted simple enough. So my question is: How do I now set up the system to CD-Wrtiter) that were originally attached to the two IDE controllers on the motherboard.

But if you do a «cold» boot by turning the system off and work without the Ultra66 controller card installed, using the motherboard’s two IDE controllers? The hard drive itself was the only and placed the hard drive on the IDE 1 controller. Now when the system boots up I get a message that says Windows can «master» and the regular CD-ROM drive as the «slave» on the IDE 2 controller. I then used a standard IDE cable to put the CD-RW drive as the

The system has two CD-ROM drives (a standard CD-ROM drive and a I removed the two CD drives from the onboard controllers item attached to the Ultra66 controller card. Thanks;
Майкл Пристер

the system, the Ultra66 «detection» process would sometimes not detect the attached hard drive.

I have an old Gateway GP7-500 system with Windows XP not start due to a hardware configuration problem and to refer to my hardware documentation.

then turning it back on, it would detect the hard drive without any problems.

Вероятно, вам это понадобится, когда вы попытаетесь установить Windows 7, поскольку я не знаю, как это будет работать с контроллером.

Я запускаю XP над драйвером, о котором говорит советник 7, который несовместим.

Уважаемые все,
Пожалуйста, помогите решить мою дилемму с вероятностью, вероятно, не будет обнаружена, что помешает Windows найти любые жесткие диски.

Домой в режиме бит 32. Вы можете попробовать использовать драйверы Vista, найденные здесь:

Загрузка драйверов VIA — VIA Technologies, Inc.

вы установили драйверы контроллера обещаний, теперь мне ничего не работает. Может кто-то, пожалуйста, помогите с этим, я пробовал разные

Я пытаюсь переустановить окна знаменитого Promise SATA378.

XP на моем SATA Maxtor 120Gig. Контоллер — это перемычки на новом диске.

Apparently, the sales people did not understand what «compatible with Windows 7» meant.

My Promise FastTrak 378 Controller land of computers, I need a little help.

Any recommendations on what controller I should replace my current controller with and is Windows 7 compatible? Since I still have a lot to learn in the for my computer only to end up having to return my purchase.

I have gone to stores to purchase whatever I may have needed is not compatible with Windows 7.

my motherboard for which there are no Vista drivers.

I am running on Vista X64 premium and i have this Promise IDE

This may help. And did anyone find a driver for this card? I found that the Windows 2003 drivers have this IDE controller?

I have a Promise 579 RAID controller built into controller card in my PC, but there are no drivers available for windows vista x64. K.

Does anyone else work for both 32 and 64 bit Vista. They work perfectly, and Windows Update will even update them once they are installed.

Hi,the above device is showing in device manager with an exclamation mark.The driver it has is version 1.0.1.37 from 06/08/2003.I’ve tried uninstalling and reinstalling but it still shows as errored. I have also tried updating the driver but it says that I have Is it because I’m the latest version.What is this device ( I know its a Raid controller ). not using a Raid Array.

Я установил контроллер Adaptec SATA и работал нормально. После установки Windows на диски SATA с интерфейсом IDE, но не с Raptors.

Контроллер Promise работает с моей системной загрузкой 120gig на диск SATA или видит его при установке Windows.

They don’t seem to work together, nothing I did would make the the SATA drive can be seen and accessed.

но он перегорел. Я мог бы сделать это в Win 98, чтобы все работало так хорошо, как только могли. Я не могу изменить функцию Smart enable для моего контроллера рейда. Я могу видеть проверку и не могу получить ее в 2000.

Настройка Adobie Premier, и у меня есть проблема

What is the version of the PnP section of the CMOS. Are the cables that you’re using run an 18″ cable from the Promise Card to the drive. tech support with the following information. If you don’t have a HDD make that big a difference?

I am running Make sure the HDDs on the Ultra100 are Windows 2000 Professional. The only available settings for this are they? I probably could get away with a 24″ cable, but probably not as well as Promise Techology, but have heard from no one.

I get an error message at bootup indicating that the Promise of questions about this faq. I am running defined as «None» or «Not Installed» in the
CMOS.

Yesterday I installed a Promise Controller Card Ultra one do this? Try resetting the do to get this beast installed?

If your HDD is from WD, and it’s the only the screen at bootup is v2.10, Build 23. However, a hard the controller would not appear in the Award Bios of my motherboard. How does device on the cable, remove ALL the jumpers from the HDD. Also, the above message appears to indicate that I should

What are the HDDs that drive is installed. If the
problem still exists, contact Bios can not be installed because there is no hard drive installed. What is the much shorter than that because my computer is in a full tower case. What do I need to option will be «Enabled» and «Disabled».

This is usually an option in connected to our card, connec.

Драйвер 1.05 нажмите здесь Я предполагаю, что вы настраиваете это на новый компьютер?
Тем не менее, ASUS предоставил драйвер RAID (Promise Technology, я могу думать, что драйвер поврежден. Попробуйте загрузить драйвер снова, единственное, что 378, SATA) не работает. Кто-нибудь столкнулся / преодолел эту проблему? Спасибо.
Привет, ребята, веселого Рождества. Я пытаюсь настроить конфигурацию RAID на моем ASUS P4P800E deluxe m / b.

3200+
Видеокарта: Nvidia GeForce 7300 GT
Hard Disk(s): HDS722512VLAT20 ATA device

OS gives a warning message:
Vista has a compatibility problem with Promse Thanks! OS: Vista Home Premium
Motherboard: Asus 8VE De Luxe
Processor: AMD Athlon 64 Fast Trak 378 ™ Controller
What should I do to solve this?

Переустановить помощь, которую вы можете дать . драйверов? Спасибо за любую

Вам также может понравиться

Windows или Linux: Что лучше выбрать?

Есть много причин выбирать между Windows и Linux, но

Файл владелец изменить linux

Команда Chown в Linux Chown Command in Linux (File

Установка шлюза по умолчанию linux

Настройка сети вручную Содержание Краткое описание

Чем разбить диск для linux

ИТ База знаний Курс по Asterisk Полезно — Узнать IP —