Write bootable iso to usb linux

How to Create Bootable USB from ISO using Linux Terminal

There are many third-party tools to create a bootable Linux USB Drive. Here I will show you how to create a bootable USB flash from ISO file using the Linux terminal.

Before we start make sure you have downloaded the .ISO file and have a USB flash drive with not less than 4GB capacity.

Check USB Drive

Connect the USB flash drive to your machine and check if it’s connected successfully. Use lsblk command to list all information about the attached block devices.

From the list find your USB drive’s mounted partition. In our case it’s /dev/sdc1. It is mounted by default.

Next, we must unmount the USB flash drive by the following command:

Make sure to change according to your USB drive and check if it has been unmounted again with lsblk command.

You must see the output without mount point in front of sdc1:

Download Linux ISO File

Here we will create a Ubuntu bootable flash drive, first go to ubuntu website and download the iso file to your Linux computer. Or you can download iso file from the command line using wget or curl command.

This will download iso file to the current directory.

Create Bootable Drive from Terminal

We are going to use dd command to create a bootable USB flash drive.

Where /path/to/input.iso is the path where .iso image downloaded. Make sure to change with your USB disk letter accordingly. The point here is to write the disk name itself (e.g. /dev/sdc) and not the partition (e.g. /dev/sdc1 ).

Where bs is read and write BYTES bytes at a time, if is the input file, of is the output file. The conv=fdatasync bit is important as dd can return before the write operation finishes.

By default the progress of the command will not be displayed, to view the progress you can use pv command:

Note: From 8.24 version of GNU Coreutils, dd command has the option to show the progress.

After the process is finished you can use USB as a bootable drive for ubuntu installation or repair.

Conclusion

Using the terminal to create a bootable USB drive is much easier and way faster than with GUI tools. Also, it is very useful to know how to do it in a terminal, because there isn’t always a GUI available. The main disadvantage, in this case, is that there is no double-check option for dd . GUI tools help you to identify and select the target drive, and provide a final checkpoint, where you can double-check, that you will be writing to the correct drive.

Источник

How to write/create a Ubuntu .iso to a bootable USB device on Linux using dd command

I downloaded a Ubuntu .iso file named artful-desktop-amd64.iso on a Debian Linux system. How do I write or burn a Ubuntu .iso to a USB device for installation purpose from Linux terminal?

You need to use the dd command to create a bootable USB stick to install Ubuntu Linux on your Laptop or Desktop. Creating a bootable Ubuntu USB stick is easy from Linux or Unix-like system such as MacOS.

Tutorial details
Difficulty level	Easy
Root privileges	Yes
Requirements	Ubuntu ISO file
Est. reading time	3 minutes

Step 1: Find your usb device name

Insert your USB stick and type the following df command to see if it is mounted automatically on a Debian Linux desktop:
$ df
Sample outputs:

You need to unmount /media/vivek/data:
$ sudo umount /media/vivek/data
Or
$ sudo umount /dev/sdd1
Another option is to run dmesg command to find out usb device name:
$ sudo dmesg
Sample outputs:

It is clear that /dev/sdd is my usb stick device name.

• No ads and tracking
• In-depth guides for developers and sysadmins at Opensourceflare✨
• Join my Patreon to support independent content creators and start reading latest guides:
  • How to set up Redis sentinel cluster on Ubuntu or Debian Linux
  • How To Set Up SSH Keys With YubiKey as two-factor authentication (U2F/FIDO2)
  • How to set up Mariadb Galera cluster on Ubuntu or Debian Linux
  • A podman tutorial for beginners – part I (run Linux containers without Docker and in daemonless mode)
  • How to protect Linux against rogue USB devices using USBGuard

Join Patreon ➔

Step 2: Create a bootable USB stick on Linux

Warning: Be careful with the USB stick/pen/disk names. Wrong names always result in data loss. Make sure you type the correct name.

Type the following dd command to create a bootable USB image from a .ISO file:
$ sudo dd if= artful-desktop-amd64.iso of= /dev/sdd bs=1M status=progress
However, I like to verify my download. For example:
$ ls -l ubuntu-20.04.1-live-server-amd64.iso
$ echo «443511f6bf12402c12503733059269a2e10dec602916c0a75263e5d990f6bb93 *ubuntu-20.04.1-live-server-amd64.iso» \
| shasum -a 256 —check
You should get the following output:
ubuntu-20.04.1-live-server-amd64.iso: OK

Click to enlarge

Ubuntu to create a bootable Ubuntu USB flash drive from terminal

In this example I am going to create a bootable flash drive for ubuntu-18.04.3-live-server-amd64.iso file as follows:
$ sudo dd if= /isos/ubuntu-18.04.3-live-server-amd64.iso of= /dev/sdb bs=1M status=progress

Another example

$ sudo dd if= /isos/ubuntu-19.04-live-server-amd64.iso of= /dev/sdb bs=1M status=progress
Sample output:

Understanding dd command options

• dd : Start the dd command to write DVD/CD iso image.
• if=/iso/ubuntu.iso : Path to input file.
• of=/dev/sdd : Path to destination USB disk/stick.
• bs=1M : read and write up to BYTES bytes at a time. In this example, 1M at a time.
• status=progress : Display progress bar while writing image to the USB stick such as /dev/sdd. See “Linux dd Command Show Progress Copy Bar With Status” for more info.

Step 3: You are done

That’s all! You now have Ubuntu on a USB stick, bootable and ready to install on your Laptop, Desktop or server based system.

Conclusion

You learned how to create a bootable usb pen drive from downloaded Ubuntu desktop or server .ISO image. See Ubuntu download page.

🐧 Get the latest tutorials on Linux, Open Source & DevOps via

Источник

Write bootable iso to usb linux

With a bootable Ubuntu USB stick, you can:

• Install or upgrade Ubuntu
• Test out the Ubuntu desktop experience without touching your PC configuration
• Boot into Ubuntu on a borrowed machine or from an internet cafe
• Use tools installed by default on the USB stick to repair or fix a broken configuration

Creating a bootable Ubuntu USB stick is very simple, especially from Ubuntu itself, and we’re going to cover the process in the next few steps.

Alternatively, we also have tutorials to help you create a bootable USB stick from both Microsoft Windows and Apple macOS.

2. Requirements

• A 4GB or larger USB stick/flash drive
• Ubuntu Desktop 14.04 or later installed
• An Ubuntu ISO file. See Get Ubuntu for download links

3. Launch Startup Disk Creator

We’re going to use an application called ‘Startup Disk Creator’ to write the ISO image to your USB stick. This is installed by default on Ubuntu, and can be launched as follows:

1. Insert your USB stick (select ‘Do nothing’ if prompted by Ubuntu)
2. On Ubuntu 18.04 and later, use the bottom left icon to open ‘Show Applications’
3. In older versions of Ubuntu, use the top left icon to open the dash
4. Use the search field to look for Startup Disk Creator
5. Select Startup Disk Creator from the results to launch the application

4. ISO and USB selection

When launched, Startup Disk Creator will look for the ISO files in your Downloads folder, as well as any attached USB storage it can write to.

It’s likely that both your Ubuntu ISO and the correct USB device will have been detected and set as ‘Source disc image’ and ‘Disk to use’ in the application window. If not, use the ‘Other’ button to locate your ISO file and select the exact USB device you want to use from the list of devices.

Click Make Startup Disk to start the process.

5. Confirm USB device

Before making any permanent changes, you will be asked to confirm the USB device you’ve chosen is correct. This is important because any data currently stored on this device will be destroyed.

After confirming, the write process will start and a progress bar appears.

6. Installation complete

That’s it! You now have Ubuntu on a USB stick, bootable and ready to go.

If you want to install Ubuntu, take a look at our install Ubuntu desktop tutorial.

Источник

USB flash installation medium

This page discusses various multi-platform methods on how to create an Arch Linux Installer USB drive (also referred to as «flash drive», «USB stick», «USB key», etc) for booting in BIOS and UEFI systems. The result will be a Live USB (Live CD-like) system that can be used for installing Arch Linux, system maintenance or for recovery purposes, and that, because of using Overlayfs for / , will discard all changes once the computer shuts down.

If you would like to run a full install of Arch Linux from a USB drive (i.e. with persistent settings), see Install Arch Linux on a removable medium. If you would like to use your bootable Arch Linux USB stick as a rescue USB, see Change root.

Contents

Using the ISO as is (BIOS and UEFI)

In GNU/Linux

Using basic command line utilities

This method is recommended due to its simplicity and universal availability, since these tools are part of coreutils (pulled in by the base meta-package).

Run the following command, replacing /dev/sdx with your drive, e.g. /dev/sdb . (Do not append a partition number, so do not use something like /dev/sdb1 ):

• using cat :
• using cp :
• using dd :
• using tee :

See [1] and [2] for a comparison and perspective on the use of those tools and why dd may be the least adapted one.

Using GNOME Disk Utility

Linux distributions running GNOME can easily make a live CD through nautilus and gnome-disk-utility . Simply right-click on the .iso file, and select Open With Disk Image Writer. When GNOME Disk Utility opens, specify the flash drive from the Destination drop-down menu and click Start Restoring.

Using MultiWriter

gnome-multi-writer is a simple GTK3 based graphical tool to write an ISO file to one or multiple USB devices at once.

Using Kindd

Kindd is a Qt based graphical frontend for dd. It is available as kindd AUR .

Using Popsicle

Popsicle is a tool made for flashing ISO files to multiple USB devices in parallel by the PopOS development team. It is written in Rust and uses GTK. It is available as popsicle AUR .

Using SUSE Studio ImageWriter

SUSE Studio ImageWriter is a Qt based tool made by the OpenSUSE development team. It is available as imagewriter AUR .

Using xorriso-dd-target

xorriso-dd-target (from libisoburn ) is a shell script which attempts to reduce the risk of overwriting the wrong storage device. Its safest mode is named -plug_test . For example, to use it as a regular user who can elevate to root using sudo:

In Windows

Using win32diskimager

win32diskimager is another graphical USB iso writing tool for Windows. Simply select your iso image and the target USB drive letter (you may have to format it first to assign it a drive letter), and click Write.

Using USBwriter

This method does not require any workaround and is as straightforward as dd under Linux. Just download the Arch Linux ISO, and with local administrator rights use the USBwriter utility to write to your USB flash memory.

Using Rufus

Rufus is a multi-purpose USB ISO writer. It provides a graphical user interface and does not care if the drive is properly formatted or not.

Simply select the Arch Linux ISO, the USB drive you want to create the bootable Arch Linux onto and click START.

Using Cygwin

Make sure your Cygwin installation contains the dd package.

Place your image file in your home directory:

Run cygwin as administrator (required for cygwin to access hardware). To write to your USB drive use the following command:

where archlinux-version-x86_64.iso is the path to the iso image file within the cygwin directory and \\.\x: is your USB flash drive where x is the windows designated letter, e.g. \\.\d: .

On Cygwin 6.0, find out the correct partition with:

and write the ISO image with the information from the output. Example:

dd for Windows

A GPL licensed dd version for Windows is available at http://www.chrysocome.net/dd. The advantage of this over Cygwin is a smaller download. Use it as shown in instructions for Cygwin above.

To begin, download the latest version of dd for Windows. Once downloaded, extract the archive’s contents into Downloads or elsewhere.

Now, launch your command prompt as an administrator. Next, change directory ( cd ) into the Downloads directory.

If your Arch Linux ISO is elsewhere you may need to state the full path, for convenience you may wish to put the Arch Linux ISO into the same folder as the dd executable. The basic format of the command will look like this.

Simply replace the various null spots (indicated by an «x») with the correct date and correct drive letter. Here is a complete example.

Using flashnul

flashnul is an utility to verify the functionality and maintenance of Flash-Memory (USB-Flash, IDE-Flash, SecureDigital, MMC, MemoryStick, SmartMedia, XD, CompactFlash etc).

From a command prompt, invoke flashnul with -p , and determine which device index is your USB drive, e.g.:

When you have determined which device is the correct one, you can write the image to your drive, by invoking flashnul with the device index, -L , and the path to your image, e.g:

As long as you are really sure you want to write the data, type yes, then wait a bit for it to write. If you get an access denied error, close any Explorer windows you have open.

If under Vista or Win7, you should open the console as administrator, or else flashnul will fail to open the stick as a block device and will only be able to write via the drive handle windows provides

In macOS

Using macOS dd

First, you need to identify the USB device. Open /Applications/Utilities/Terminal and list all storage devices with the command:

Your USB device will appear as something like /dev/disk2 (external, physical) . Verify that this is the device you want to erase by checking its name and size and then use its identifier for the commands below instead of /dev/diskX.

A USB device is normally auto-mounted in macOS, and you have to unmount (not eject) it before block-writing to it with dd . In Terminal, do:

Now copy the ISO image file to the device. The dd command is similar to its Linux counterpart, but notice the ‘r’ before ‘disk’ for raw mode which makes the transfer much faster:

This command will run silently. To view progress, send SIGINFO by pressing Ctrl+t . Note diskX here should not include the s1 suffix, or else the USB device will only be bootable in UEFI mode and not legacy. After completion, macOS may complain that «The disk you inserted was not readable by this computer». Select ‘Ignore’. The USB device will be bootable.

In Android

EtchDroid

EtchDroid is a OS image flasher for Android. It works without root permissions on Android 5 to Android 8. According to bug reports it does not always work on Android 9 and Android 4.4.

To create an Arch Linux installer, download the ISO image file on your Android device. Plug the USB drive to your device, using a USB-OTG adapter if needed. Open EtchDroid, select «Flash raw image», select your Arch ISO, then select your USB drive. Grant the USB API permission and confirm.

Keep your phone on a table while it is writing the image: a lot of USB-OTG adapters are a bit wobbly and you might unplug it by mistake.

Using manual formatting

BIOS and UEFI

In GNU/Linux

This method is more complicated than writing the image directly with dd , but it does keep the flash drive usable for data storage (that is, the ISO is installed in a specific partition within the already partitioned device without altering other partitions).

• If not done yet, create a partition table on /dev/sdX .
• If not done yet, create a partition on the device. The partition /dev/sdXn must be formatted to FAT32.
• Mount the FAT32 file system located in the USB flash device and extract the contents of the ISO image to it. For example:

Booting requires specifying the volume on which the files reside. By default the label ARCH_YYYYMM (with the appropriate release year and month) is used. Thus, the file system’s label has to be set accordingly. Alternatively, you can change this behaviour by altering the lines ending by archisolabel=ARCH_YYYYMM in the files:

• BIOS boot: /mnt/syslinux/archiso_sys-linux.cfg
• UEFI boot: /mnt/loader/entries/01-archiso-x86_64-linux.conf , /mnt/loader/entries/02-archiso-x86_64-speech-linux.conf and /mnt/loader/entries/03-archiso-x86_64-ram-linux.conf

To use an UUID instead, replace those portions of lines with archisodevice=/dev/disk/by-uuid/YOUR-UUID .

Syslinux files for BIOS systems are already copied to /mnt/syslinux . Unmount the FAT file system, install the syslinux and mtools packages and run the following commands to make the partition bootable:

In Windows

• Partition and format the USB drive using Rufus USB partitioner. Select partition scheme option as MBR for BIOS and UEFI and File system as FAT32. Uncheck «Create a bootable disk using ISO image» and «Create extended label and icon files» options.
• Change the Volume Label of the USB flash drive X: to match the LABEL mentioned in the archisolabel= part in \loader\entries\archiso-x86_64.conf . This step is required for Official ISO (Archiso). This step can be also performed using Rufus, during the prior «partition and format» step.
• Extract the ISO (similar to extracting ZIP archive) to the USB flash drive using 7-Zip.
• Download official Syslinux 6.xx binaries (zip file) from https://www.kernel.org/pub/linux/utils/boot/syslinux/ and extract it. The version of Syslinux should be the same version used in the ISO image.

• Run the following command (in Windows cmd prompt, as admin):

• Install Syslinux to the USB by running (use win64\syslinux64.exe for x64 Windows):

BIOS only

In GNU/Linux

Making a USB-ZIP drive

For some old BIOS systems, only booting from USB-ZIP drives is supported. This method allows you to still boot from a USB-HDD drive.

• Download syslinux and mtools from the official repositories.
• Find your usb drive with lsblk .
• Type mkdiskimage -4 /dev/sdx 0 64 32 (replace x with the letter of your drive). This will take a while.

From here continue with the manual formatting method. The partition will be /dev/sdx4 due to the way ZIP drives work.

UEFI only

For UEFI-only booting, it is enough to copy the files from the ISO and either change the FAT volume’s label or edit boot loader configuration files to set archisolabel / archisodevice accordingly.

In GNU/Linux

This method involves simply copies files from the ISO image to a USB flash drive and either adjusts the systemd-boot configuration or the file system’s label.

1. If not done yet, create a partition table on /dev/sdX and a partition ( /dev/sdXn ) on the device.
2. If not done yet, format the partition to FAT32:
3. Mount the FAT32 file system:
4. Extract the ISO image to the mounted file system:
5. Either:
   • edit /mnt/loader/entries/archiso-x86_64-linux.conf and /mnt/loader/entries/archiso-x86_64-speech-linux.conf and change archisolabel=ARCH_YYYYMM to match your device, e.g. by replacing it with archisodevice=/dev/disk/by-uuid/YOUR-UUID ,
   • or unmount the file system and change its LABEL to match ARCH_YYYYMM :
6. Unmount the FAT32 file system.

In Windows

1. Partition the USB flash drive and format it to FAT32.
2. Right click on archlinux-version-x86_64.iso and select Mount.
3. Navigate to the newly created DVD drive and copy all files and folders except for syslinux to the USB flash drive.
4. When done copying, right click on the DVD drive and select Eject.
5. Either:
   • edit X:\loader\entries\archiso-x86_64-linux.conf and X:\loader\entries\archiso-x86_64-speech-linux.conf with a text editor and change archisolabel=ARCH_YYYYMM to match your device, e.g. by replacing it with archisolabel=YOUR-LABEL ,
   • or change the FAT32 volume label to match ARCH_YYYYMM .
6. Eject the USB flash drive.

Using a multiboot USB drive

This allows booting multiple ISOs from a single USB device, including the archiso. Updating an existing USB drive to a more recent ISO is simpler than for most other methods. See Multiboot USB drive.

Using ventoy

Ventoy is an open source tool to create bootable USB drive for ISO/WIM/IMG/VHD(x)/EFI files. With ventoy, you do not need to format the disk over and over, you just need to copy the ISO/WIM/IMG/VHD(x)EFI files to the USB drive and boot them directly. You can copy many files at a time and ventoy will give you a boot menu to select them. It is available as ventoy-bin AUR .

In Windows

Loading the installation medium from RAM

This article or section is a candidate for merging with Multiboot USB drive#Using Syslinux and memdisk.

This method uses Syslinux and a Ramdisk (MEMDISK) to load the entire Arch Linux ISO image into RAM. Since this will be running entirely from system memory, you will need to make sure the system you will be installing this on has an adequate amount. A minimum amount of RAM between 500 MB and 1 GB should suffice for a MEMDISK based, Arch Linux install.

For more information on Arch Linux system requirements as well as those for MEMDISK see the Installation guide and here. For reference, here is the preceding forum thread.

Preparing the USB flash drive

Begin by formatting the USB flash drive as FAT32. Then create the following folders on the newly formatted drive.

Copy the needed files to the USB flash drive

Next copy the ISO that you would like to boot to the Boot/ISOs folder. After that, extract from the following files from the latest release of syslinux from here and copy them into the following folders.

• ./win32/syslinux.exe to the Desktop or Downloads folder on your system.
• ./memdisk/memdisk to the Settings folder on your USB flash drive.

Create the configuration file

After copying the needed files, navigate to the USB flash drive, /boot/Settings and create a syslinux.cfg file.

For more information see the Syslinux article.

Final steps

Finally, create a *.bat file where syslinux.exe is located and run it («Run as administrator» if you are on Vista or Windows 7):

Inadvisable methods

Using etcher

etcher contains analytics and first-party advertising. See [3], [4] and [5].

Источник