Xcape linux что это

Articles of xcape

Выполнить команду, если нажаты клавиши F + J

Что бы мне нужно было сделать, если бы я хотел выполнить: chromium & , нажав F + J ? Предпочтительные требования: Глобально ansible через рабочую среду Независимо от конечного фокуса или нет Без использования хака модификатора другими словами, если удерживать F ИЛИ J , обрабатывать его как клавишу ALT или SUPER

Как заменить мои правила udev на клавиатуре и мыши на xorg.conf.d?

Поскольку невозможно сделать правила udev, которые влияют на настройки Xorg, запущенные при запуске , я бы хотел заменить их другими альтернативами. На данный момент у меня есть два основных сценария udev, которые я написал. Первое изменение раскладки клавиатуры при подключении или удалении клавиатуры, а также в запуске xcape . Второй замедляет указатель, когда подключена определенная […]

Использование xcape + xmodmap для изменения некоторых ключей

Использование xcape и xmodmap , как это сделать Сделайте ключ CAPSLOCK в качестве ключа модификатора SUPER при нажатии вместе с другим ключом. При нажатии на кнопку CAPSLOCK в качестве клавиши ESCAPE сделайте клавишу CAPSLOCK .

Как переназначить буквенные ключи для модификатора?

Я действительно привык к функциональности «Simultaneous Vi Mode» KeyRemap4MacBook, которая позволяет одновременно удерживать и удерживать клавиши s и d, а затем использовать клавиши h , j , k и l в качестве клавиш со стрелками. Когда s и d сжимаются вместе, никакое событие s или d не запускается, но когда я печатаю нормально, я не […]

Источник

Xorg/Keyboard configuration

This article describes the basics of Xorg keyboard configuration. For advanced topics such as keyboard layout modification or additional key mappings, see X keyboard extension or Extra keyboard keys respectively.

The Xorg server uses the X keyboard extension (XKB) to define keyboard layouts. Optionally, xmodmap can be used to access the internal keymap table directly, although this is not recommended for complex tasks. Also systemd’s localectl can be used to define the keyboard layout for both the Xorg server and the virtual console.

Contents

Viewing keyboard settings

You can use the following command to see the actual XKB settings:

Third party utilities

There are some «unofficial» utilities which allow to print specific information about the currently used keyboard layout.

Setting keyboard layout

Keyboard layout in Xorg can be set in multiple ways. Here is an explanation of used options:

• XkbModel selects the keyboard model. This has an influence only for some extra keys your keyboard might have. The safe fallback are pc104 or pc105 . But for instance laptops usually have some extra keys, and sometimes you can make them work by simply setting a proper model.
• XkbLayout selects the keyboard layout. Multiple layouts may be specified in a comma-separated list, e.g. if you want to quickly switch between layouts.
• XkbVariant selects a specific layout variant available for the XkbLayout . For instance, the default sk (Slovak) variant is qwertz , but you can manually specify qwerty , etc.
• XkbOptions contains some extra options (comma-separated). Used for specifying layout switching, notification LED, compose mode etc. See the #Frequently used XKB options section for examples.

The layout name is usually a 2-letter country code. To see a full list of keyboard models, layouts, variants and options, along with a short description, open /usr/share/X11/xkb/rules/base.lst . Alternatively, you may use one of the following commands to see a list without a description:

• localectl list-x11-keymap-models
• localectl list-x11-keymap-layouts
• localectl list-x11-keymap-variants [layout]
• localectl list-x11-keymap-options

Examples in the following subsections will have the same effect, they will set pc104 model, cz as primary layout, us as secondary layout, dvorak variant for us layout and the Win+Space combination for switching between layouts. See xkeyboard-config(7) for more detailed information.

Using setxkbmap

This article or section needs expansion.

setxkbmap sets the keyboard layout for the current X session only, but can be made persistent in xinitrc or xprofile. This overrides system-wide configuration specified following #Using X configuration files. However, persistence does not apply to keyboards such as external keyboards, unless their device id was specified when setxkbmap was run. Or that they are the core keyboard device of the X server.

The usage is as follows (see setxkbmap(1) ):

To change just the layout ( -layout is the default flag):

For multiple customizations:

Using X configuration files

The syntax of X configuration files is explained in Xorg#Configuration. This method creates system-wide configuration which is persistent across reboots.

Here is an example:

Using localectl

For convenience, the tool localectl may be used instead of manually editing X configuration files. It will save the configuration in /etc/X11/xorg.conf.d/00-keyboard.conf , this file should not be manually edited, because localectl will overwrite the changes on next start.

The usage is as follows:

To set a model, variant or options, all preceding fields need to be specified, but the preceding fields can be skipped by passing an empty string with «» . Unless the —no-convert option is passed, the specified keymap is also converted to the closest matching console keymap and applied to the console configuration in vconsole.conf . See localectl(1) for more information.

To create a /etc/X11/xorg.conf.d/00-keyboard.conf like the above:

Frequently used XKB options

Switching between keyboard layouts

To be able to easily switch keyboard layouts, first specify multiple layouts between which you want to switch (the first one is the default). Then specify a key (or key combination), which will be used for switching. For example, to switch between a US and a Swedish layout using the CapsLock key, use us,se as an argument of XkbLayout and grp:caps_toggle as an argument of XkbOptions . The number of XkbLayout s should match that of the XkbVariant s — if you want to switch solely between different variants, then duplicate the layout accordingly (e.g. de,de ).

You can use other key combinations than CapsLock , they are listed in /usr/share/X11/xkb/rules/base.lst , start with grp: and end with toggle . To get the full list of available options, run the following command:

Note that the grp:alts_toggle option is unreliable and unlikely to be fixed; prefer other combinations!

Terminating Xorg with Ctrl+Alt+Backspace

By default, the key combination Ctrl+Alt+Backspace is disabled. You can enable it by passing terminate:ctrl_alt_bksp to XkbOptions . This can also be done by binding a key to Terminate_Server in xmodmap (which undoes any existing XkbOptions setting). In order for either method to work, one also needs to have DontZap set to «off» in ServerFlags ; however, from at least version R6.8.0 (year 2004) [1] this is the default.

Swapping Caps Lock with Left Control

To swap Caps Lock with Left Control key, add ctrl:swapcaps to XkbOptions . Run the following command to see similar options along with their descriptions:

Enabling mouse keys

Mouse keys, not to be confused with the keys of the mouse, is disabled by default and has to be manually enabled by passing keypad:pointerkeys to XkbOptions . This will make the Shift+NumLock shortcut toggle mouse keys.

See also X keyboard extension#Mouse control for advanced configuration.

Configuring compose key

Though typically not on traditional keyboards, a Compose key can be configured to an existent key.

The Compose key begins a keypress sequence that involves (usually two) additional keypresses. Usage is typically either for entering characters in a language that the keyboard was not designed for, or for other less-used characters that are not covered with the AltGr modifier. For example, pressing Compose ‘ e produces é , or Compose — — — will produce an «em dash»: — .

Though a few more eccentric keyboards feature a Compose key, its availability is usually through substituting an already existing key to it. For example, to make the Menu key a Compose key use the Desktop environment configuration, or pass compose:menu to XkbOptions (or setxkbmap: setxkbmap -option compose:menu ). Allowed key substitutions are defined in /usr/share/X11/xkb/rules/base.lst :

If the desired mapping is not found in that file, an alternative is to use xmodmap to map the desired key to the Multi_key keysym, which acts as a compose key by default (note that xmodmap settings are reset by setxkbmap).

Key combinations

The default combinations for the compose keys depend on the locale configured for the session and are stored in /usr/share/X11/locale/used_locale/Compose , where used_locale is for example en_US.UTF-8 .

You can define your own compose key combinations by copying the default file to

/.XCompose and editing it. Alternatively, create an empty

/.XCompose and include the default one using include «%L» , for example:

The compose key (denoted as in the

/.XCompose file) works with any of the thousands of valid Unicode characters, including those outside the Basic Multilingual Plane. Take a look at the Compose(5) man page, it explains the format of the XCompose files.

However, GTK does not use XIM by default and therefore does not follow

/.XCompose keys. This can be fixed by forcing GTK to use XIM by adding export GTK_IM_MODULE=xim and/or export XMODIFIERS=»@im=none» to

Currency sign on other key

Most European keyboards have a Euro sign (€) printed on on the 5 key. For example, to access it with Alt+5 , use the lv3:lalt_switch and eurosign:5 options.

The Rupee sign (₹) can be used the same way with rupeesign:4 .

Switching state immediately when Caps Lock is pressed

Those who prefer typing capital letters with the Caps Lock key may experience a short delay when Caps Lock state is switched, resulting in two or more capital letters (e.g. THe, ARch LInux). This occurs because Caps Lock is enabled immediately once the Caps Lock key is pressed, but is only disabled upon release of the second key-press. This behaviour stems from typewriters where a Caps Lock function was achieved by physically locking the shifted typebars in place, and the release of a shift key-press was the action that caused the release of the lock.

Some more popular operating systems have removed this behaviour, either voluntarily (as it can be confusing to some) or by mistake, however this is a question of preference. Bug reports have been filed on the Xserver bug tracker, as there is currently no easy way to switch to the behaviour reflected by those other operating systems. For anyone who would like to follow up the issue, bug reports and latest working progress can be found at [2] and [3].

Workaround

First, export your keyboard configurations to a file:

In the file xkbmap, locate the Caps Lock section which begins with key :

and replace whole section with the following code:

Save and reload keyboard configurations:

Consider making it a service launching after X starts, since reloaded configurations do not survive a system reboot.

One-click key functions

To assign an additional one-click function to a modifier key, you can use xcape . For example it is possible to have CapsLock work as Escape when pressed alone, and as Control when used with another key. First set the Control swapping using setxkbmap as mentioned earlier, and xcape to set the Escape association:

You can set multiple associations separated with a semicolon, e.g.: Caps_Lock=Escape;Shift_L=Escape .

If you hold a key for longer than the timeout value (default 500 ms), xcape will not generate a key event.

Adjusting typematic delay and rate

The typematic delay indicates the amount of time (typically in milliseconds) a key needs to be pressed and held in order for the repeating process to begin. After the repeating process has been triggered, the character will be repeated with a certain frequency (usually given in Hz) specified by the typematic rate. Note that these settings are configured separately for Xorg and for the virtual console.

Using xset

The tool xset can be used to set the typematic delay and rate for an active X server, certain actions during runtime though may cause the X server to reset these changes and revert instead to its seat defaults.

For example to set a typematic delay to 200ms and a typematic rate to 30Hz, use the following command (use xinitrc to make it permanent):

Issuing the command without specifying the delay and rate will reset the typematic values to their respective defaults; a delay of 660ms and a rate of 25Hz:

Using XServer startup options

A more resistant way to set the typematic delay and rate is to make them the seat defaults by passing the desired settings to the X server on its startup using the following options:

• -ardelay milliseconds — sets the autorepeat delay (length of time in milliseconds that a key must be depressed before autorepeat starts).
• -arinterval milliseconds — sets the autorepeat interval (length of time in milliseconds that should elapse between autorepeat-generated keystrokes).

See Xserver(1) for a full list of X server options and refer to your display manager for information about how to pass these options.

Источник

Xcape linux что это

xcape allows you to use a modifier key as another key when pressed and released on its own. Note that it is slightly slower than pressing the original key, because the pressed event does not occur until the key is released. The default behaviour is to generate the Escape key when Left Control is pressed and released on its own. (If you don’t understand why anybody would want this, I’m guessing that Vim is not your favourite text editor 😉

Minimal building instructions

First install the development dependencies. On Debian-based systems (including Ubuntu and Linux Mint), run:

On Fedora-based systems, run:

Debug mode. Does not fork into the background. Prints debug information.

Foreground mode. Does not fork into the background.

If you hold a key longer than this timeout, xcape will not generate a key event. Default is 500 ms.

The expression has the grammar ‘ModKey=Key[|OtherKey][;NextExpression]’

The list of key names is found in the header file X11/keysymdef.h (remove the XK_ prefix). Note that due to limitations of X11 shifted keys must be specified as a shift key followed by the key to be pressed rather than the actual name of the character. For example to generate «<" the expression 'ModKey=Shift_L|bracketleft' could be used (assuming that you have a key with "<" above "[").

You can also specify keys in decimal (prefix # ), octal ( #0 ), or hexadecimal ( #0x ). They will be interpreted as keycodes unless no corresponding key name is found.

This will make Left Shift generate Escape when pressed and released on its own, and Left Control generate Ctrl-O combination when pressed and released on its own.

In conjunction with xmodmap it is possible to make an ordinary key act as an extra modifier. First map the key to the modifier with xmodmap and then the modifier back to the key with xcape. However, this has several limitations: the key will not work as ordinary until it is released, and in particular, it may act as a modifier unintentionally if you type too fast. This is not a bug in xcape, but an unavoidable consequence of using these two tools together in this way. As an example, we can make the space bar work as an additional ctrl key when held (similar to Space2ctrl) with the following sequence of commands.

Note regarding xmodmap

If you are in the habit of remapping keycodes to keysyms (eg, using xmodmap), there are two issues you may encounter.

You will need to restart xcape after every time you modify the mapping from keycodes to keysyms (eg, with xmodmap), or xcape will still use the old mapping.

The key you wish to send must have a defined keycode. So for example, with the default mapping Control_L=Escape , you still need an escape key defined in your xmodmap mapping. (I get around this by using 255, which my keyboard cannot send).

The author can be reached at albin dot olsson at gmail dot com

About

Linux utility to configure modifier keys to act as other keys when pressed and released on their own.

Источник